(Part 2) Best products from r/DJSetups
We found 15 comments on r/DJSetups discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 34 products and ranked them based on the amount of positive reactions they received. Here are the products ranked 21-40. You can also go back to the previous section.
21. Electrical Buddy A01 Silver Tone Top Potentiometer Volume Control Rotary Knobs 6mm Shaft Hole 20PCS
- Replacement part for audio device, 6mm round shaft can be push on it easily.
- 360 degree rotary knob for easily control the potentiometer.
- Size: 19.5x11.5mm / 0.76'' x 0.43''(D*H)
- Fit for Shaft Hole Diameter:6mm/0.24''
- Package Content: 20 Pcs x Potentiometer Rotary Knob
Features:
22. Metal Sofa Legs, Furniture Legs, Angled, Steel, Stainless Steel Finish - Set of 4 New (7-3/4" H)
- Stainless Steel Materialk, Slant Angle Design
- Brushed Stainless Steel Finish
- Large Stainless Steel Mounting Plate: 7-1/8"x2.75"
- Assembly Height: 7-3/4", 2" Diameter Round Tube
- Include 4 Legs and Screws
Features:
23. Hercules DJ Control Steel
Advanced digital mixer that offers a multitude of functions; dual mixing decks on a steel surface2 ultra-precise jog wheels with adjustable resistance, 13 rotary switches, 46 push buttons, and 6 fadersAmple space under the DJ's fingers allows precise mixingCompatible with all DJing software programs...
24. Zinus Modern Studio Collection 20 Inch Square Side / End Table / Night Stand / Coffee Table / Good Design Award Winner, Brown
- Red mahogany wood grain finish is easy to clean
- Functional and stylish with additional lower shelf
- Easy to assemble and fits in small spaces
- 20 x 20 x 20 Inches; Built to hold up to 100 lbs of evenly distributed weight
- Sturdy, strong square steel tubing frame; Worry free limited 1 year warranty
Features:
25. Odyssey ATT Dj Truss Table
Perfect for clubs, restaurants or studioOdyssey ATT Dj Truss Table
26. Sennheiser HD280PRO Headphones (old model)
- Dynamic, closed ear headphones with up to 32 dB attenuation of outside sound
- Lightweight and comfortable, ergonomic design, Cord Length 3.3 9.8 feet Coiled
- Extended frequency response and warm, natural sound reproduction
- Around the ear design with padded earcups
- Earpads, headband padding, and audio cord are easily replaceable, ensuring long life
- Connectivity technology : Wired
- Dynamic, closed ear headphones with up to 32 dB attenuation of outside sound
- Lightweight and comfortable, ergonomic design
- Extended frequency response and warm, natural sound reproduction
- Collapsible earpieces for compact transport
- Earpads, headband padding, and audio cord are easily replaceable, ensuring long life
Features:
27. VIVO Black Electric Stand Up Desk Frame Workstation, Single Motor Ergonomic Standing Height Adjustable Base (DESK-V102E)
- Compatibility - Recommended table top sizes: length of 41” to 85”, width of 23” to 44”, and a thickness of 3/4” and greater (Actual Frame Length: 40" to 61", Frame Height: 28.7" to 48.5").
- Electric Lift System - Powerful smooth single motor lift system with level rise and 1.5” per second lift speed. The strong legs use telescopic adjustment transitioning from sitting to standing in seconds.
- Touch Control - Elegant controller touch screen with customizable settings for desired user heights and programmable alarm settings for helpful reminders to stand or sit throughout your busy day.
- Sturdy 176 lbs Support - All steel construction and a thick leg support system is made to last, holding up to 176 lbs and keeping your expensive equipment safe and secure.
- We've Got You Covered - Sturdy design is backed with a 3 Year Manufacturer Warranty and friendly tech support to help with any questions or concerns.
Features:
28. VIVO Premium Universal 25 inch Floor Speaker Stands for Surround Sound and Book Shelf Speakers (STAND-SP03B)
- Compatibility - Universal surround sound speaker stand system for satellite speakers, bookshelf speakers, and more. Comes with 2 stands.
- Dimensions - Floor to top shelf measures 25”. Top shelf measures 6.25” x 6.25” and the base measures 9.5” x 9.5”.
- Appearance - High gauge cold rolled steel speaker stands (2 stands included) in sleek matte black finish for low profile.
- Carpet Spikes - Optional, easily attachable and detachable spikes for carpet placement.
- Padded Feet - Optional, easily attachable and detachable padded feet for solid floor placement.
Features:
29. GripIt Blue 1" Plasterboard Drywall Anchor Fixings For Stud Walls - Max Load 113Kg (8 Pack) (4pk)
Very easy and quick to install - simply Drill, Tap and Turn100% universal, removable and reusable, ideal for Dot & Dab walls, quick and easy to install - just drill, tap and turn.Suitable for all plasterboard types (9mm to 15mm) including dot & dab installationsSupports VERY heavy loads (up to 113kg...
30. Heil Sound PL-2T Overhead Broadcast Boom
Internal springsTop and back plates are removable for convenient cable threadingStandard C clamp mountAccepts standard 5/8" threaded mic clips/shockmountsNo more cable connectors to remove and replace! Ships with a standard C-clamp mount
31. Heil Sound DT-1 Flush Mount for PL-2T Overhead Broadcast Boom
- DT-1 Flush Mount for PL-2T Overhead Broadcast Boom
- The flush-mount Heil DT-1 works with the Heil PL-2T overhead broadcast boom
- Drill a 1-1/2" hole in the desk top, then tighten the large washer and nut of the DT-1 under the desk
- The flush-mount Heil DT-1 works with the Heil PL-2T overhead broadcast boom
- Drill a 1-1/2" hole in the desk top, then tighten the large washer and nut of the DT-1 under the desk
Features:
32. Southland 583-120HN Steel Nipples, 1/2" x 12", Black
This Item Muellar 583-120HC 1/2x12 Black NippleUsed for Rough Plumbing, Pipe and ConduitThe Product is manufactured in ChinaCountry of Origin: China
33. 4 Pack 1/2” Floor Flange Black Cast Iron Pipe Fittings Retro Decor Threaded Industrial Plumbing DIY Furniture Pipe Shelf Wall Flanges for Pipe by EAONE
Premium Quality -- Made of cast iron, a kind of alloys made from iron, silicon and carbon, the floor flange pipe fitting features strong intensity, excellent toughness and malleable formability for industrial pipe plumbing1/2 inch Pipe Fittings -- Malleable cast iron pipe fittings, with 65mm/2.5 inc...
34. Metro ED500 DataVac 500-Watt 120 volt 0.75-HP Electric Blower Duster
- Sturdy all-steel construction. Please note: This item is a blower, NOT a vaccuum.
- Includes air pin-pointer, air concentrator nozzle, air -flare nozzle, micro-cleaning tool kit
- More effective than canned air and safer than canned air
- 500 watt motor, .75 HP, 4.5 amps, 70 CFM air flow
- 120 volt (not for use in 220 or 230-volt current).
Features:
Here’s the link
Electrical Buddy 19.5x11.5mm A01 Silver Tone Top Potentiometer Volume Control Rotary Knobs 6mm Shaft Hole 20PCS https://www.amazon.com/dp/B07MCQSGCK/ref=cm_sw_r_cp_api_i_3ConDbR3X5XP5
Legs are from Amazon because the angles Capita legs are expensive in the US.
Metal Sofa Legs, Furniture Legs,... https://www.amazon.com/dp/B0786T564Q?ref=ppx_pop_mob_ap_share
https://m2.ikea.com/us/en/p/lack-wall-shelf-black-brown-40430588/
It works just like any other MIDI controller, so yeah, it'll work fine in Ableton. The jog wheels work great for video editing in Premiere. All this thing does is send commands; nothing's done internally. Therefore you can reprogram every button and knob as you see fit (unless of course you use the bundled software, an old-ass version of VDJ that was built specifically for this controller. I didn't even bother installing it).
The build quality isn't very solid on this thing, though (read my review here). I've had mine for three years now and it's doing ok mainly because I baby it (one of the knobs does have a bit of a wobble to it, though), but one drop landing on a knob and it's fucked. So if you get one, keep the lid on it anytime you're more than a meter away from it.
With that being said, unless you're as broke as me, I highly recommend you save up an extra $150ish and go with the DJControl Steel instead.
That's brilliant about the 2x2, rack, and table top. I've had a hell of a time trying to find some kind of perfect record/DJ unit & audio rack to hold a couple receivers/graphic equalizers I've collected over the years. What I have in my mind's eye does not exist. I basically went with this solid night stand from Amazon that gets the job done and sits next to a expedit 4x2 w/ 2 MK5s and a mixer on top. I can't find a pic at the moment. :(
Sennheiser HD280 Pro
http://www.amazon.com/Sennheiser-HD-280-Pro-Headphones/dp/B000065BPB/ref=sr_1_3?s=musical-instruments&ie=UTF8&qid=1422302620&sr=1-3&keywords=SENNHEISER+HEADPHONES
Odyssey ATT Dj Truss Table https://www.amazon.com/dp/B0002JL2BU/ref=cm_sw_r_cp_api_Lm5OybYR3PX29
Try using grip its: GripIt Blue 25mm Plasterboard Fixings For Stud Walls - Max Load 113Kg (4 Pack) https://www.amazon.co.uk/dp/B00S52UAJQ/ref=cm_sw_r_cp_api_i_i3xrDb1HC15CK
I’ve hung tv’s on stud walls using these babies before.
https://www.amazon.com/VIVO-Universal-Surround-Speakers-STAND-SP03B/dp/B01MCS2ZLO/ref=zg_bs_509308_16?_encoding=UTF8&psc=1&refRID=NJJZKG8KYVWEK1B5M0EN
​
basically these, however I bought mine on the South Korean Market
Here you go
VIVO Black Electric Stand Up Desk Frame Workstation, Single Motor Ergonomic Standing Height Adjustable Base (DESK-V102E) https://www.amazon.com/dp/B071KGDGNK/ref=cm_sw_r_em_apa_i_D0.3DbFKECNY4
That's a nice setup.
Seems like the mic stand gets in the way, and would be a pain in the ass to adjust. What about installing a flange in the desk, then attaching a mic boom to it?
Edit: And maybe adding some decoupling risers to those monitors, and a vertical support block to that hutch so the center doesn't sag...
https://www.amazon.com/gp/product/B07K23VMW1/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B000BQYAUY/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
Shelf pieace came from the half off sale area of returns and crap at ikea, not sure what its actually from.