Best products from r/FZ07
We found 50 comments on r/FZ07 discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 130 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. AUXITO 194 LED Light Bulb 6000K White 168 2825 W5W T10 Wedge 24-SMD 3014 Chipsets LED Replacement Bulbs Error Free for Car Dome Map Door Courtesy License Plate Lights, Pack of 10
- 194 LED Bulbs: Voltage 12V, 6000K xenon white, power 2w/pc, 240lm/pc, dimensions: 1 by 0.47 inches, net weight: 2g/pc. Low power consumption for longer lifespan
- 300% Brighter: Each 194 bulb has 24 pieces of 3014 led chips on it, 360 degree lighting angle, no blind spot, at least 3 times brighter than stock 194 bulbs, super bright brings your car a refreshed new look
- Fit Bulb Sizes: 168, 175, 194, 2825, W5W, T10. Easy to install, just plug and play. Canbus error free, no error after installation for 99% of vehicles
- Wide Application: AUXITO 168 led bulbs can be used for license plate tag light, map lights, dome light, front/rear side marker lights, trunk cargo room lights, turn signal lights, reading lights, glove box lights, inner tail light bulb, etc
- Package Includes: 10X AUXITO 175 led bulbs (Please check the description for details). Note: Amazon filter system may not be 100% accurate, the bulb size may vary between trim of your vehicle. Please double check owners manual or original bulb size to confirm
Features:
2. Motion Pro 01-0094 Throttle Sleeve
- OEM throttle tube replacement for many Kawasaki/Suzuki/Yamaha throttles
- Heavier duty and exceeds the quality and durability of OEM tubes
- Nylon fabric composite material will not scar bars like aluminum tubes
- Molded ridges to help secure grips
- Pop out end caps for use with bar end type hand guards
Features:
3. Integrated Sequential LED Tail Lights Smoke Lens for 2015-2017 Yamaha FZ-07 YZF R3
- Super bright LED tail light with built in turn signals
- Easy plug and play installation with included sub-harness
- Stop Alert - utilizes 3 quick red flashes when brakes are applied initially
- Sequential alternating yellow LED turn signals (red turns off on that side when signals are activated)
- High quality injection molded housing and UV protected lens element
Features:
4. Yorkim 194 LED Bulbs Xenon White 6000k Super Bright 5th Generation, T10 LED Bulbs, 168 LED Bulb for Car Interior Dome Map Door Courtesy License Plate Lights W5W 2825, Pack of 10
- 【SUPER BRIGHT】 - T10 194 LED Light Bulbs Pack include 10 pcs of high quality LED interior bulbs, each designed with 5 LEDs (5050 SMD), 360 degree lighting angle, no blind spot, super brighter than the stock yellowish halogen bulb, updates your car interior to a modern look
- 【FITMENT】 - T10, 147, 152, 158, 159, 161, 168, 175, 184, 192, 193, 194 2825 W5W Size. Normally use as Map Light, or Dome Light, or License Plate Light, or Trunk Light, or Courtesy Light, etc
- 【**ATTENTION】 - This 194 LED Bulb is polarity sensitive, switch 180º to get the right polarity if it doesn't light up
- 【EASY INSTALLATION】 - Plug and play within 10 minutes for most vehicle. Some vehicles (especially German cars) might pop up error message, choose Canbus T10 (ASIN: B07HQ5S15Q) for error free
- 【NOTE】 - Normally different LED bulbs are required for different parts of the same car (I.e. dome light, map light, trunk light, etc.). Although 194 LED bulbs are most commonly used, they may not fit all parts of your car. Please check owner's manual to verify compatibility before purchase or send us a picture of your original bulb for our assistance on selecting the right product
Features:
5. iJDMTOY (1) 2-Pin Electronic LED Flasher Relay Fix For Motorcycle Bike Scooter LED Turn Signal Bulbs Hyper Flash Issue
Part Number: LF1-S-PIN (Size: 1" x 1" x 1")Completely waterproof design and direct replace most OEM two-wire/pin flasherEliminate the need for tapping wires to install the load resistors and allow LED bulbs to blink at the normal rateCompatible with Honda, Kawasaki, Suzuki, Yamaha motorcycles and ma...
6. Complete Full system exhaust Compatible with Yamaha FZ-07 MT-07 2014-2019
Compatible with Yamaha FZ-07 MT-07 2014-2019Material : Aluminum + Stainless steel ,The exhaust system is lighter if compared to stock and appearance excellent production quality.Easy to install, Without instructions.Sounds great ! With baffle Sounds low and deep , Removed baffle souds loud.With remo...
7. Yamaha FZ-07 / MT-07 2015 2016 2017 Elite-1 Fender Eliminator and Undertail Closeout
INCLUDED: Standard Fender Eliminator, Undertail Closeout, Corrosion Free Mounting Hardware (Read ad CAREFULLY) NOT INCLUDED: License Plate Light, Tail Light, Signals, Everything other than what's listed. (Just because you THINK it's included does not mean it is.)Eliminates OEM FenderCloses holes lef...
8. CNC Bar End Mirrors for YAMAHA FZ-07 (modification required)
- made from 6061-T6 Aluminum, solid and anti- vibration
- Light blue tinted mirrors glass reduces glare while giving the mirrors an elegant style
- Hardware is made from stainless steel for strength and anti-rusting properties. Easily installed in minutes, tools included
- 3 mounting rings included will fit 22-30mm non-tapered hollow Handle bar,These mirrors fit any bikes with standard 7/8" 22MM hollow handle bar,for FZ07 stcok bar, you need to take out the thread insert out before installation
- Price is for two mirrors, one Right Side and one Left Side mirror.
Features:
9. Auxbeam LED Headlight Bulbs F-S2 Series LED Headlights with 2 Pcs of H4 LED Conversion Kits72W 8000lm Hi-Lo Beam
Auxbeam H4 headlights with DC 9-32V(fit 12V, 24V vehicles) Operating Voltage. Color Temperature for H4 headlight bulbs is Pure White 6000K. Led bulbs with IP65 rated water and dust seal, over 30000hrs lifetimeH4 led headlights with Latest Bridgelux COB chip(USA) light source, 3 luminous faces no bli...
10. Design Engineering 010107 Exhaust Heat Wrap, 1" x 50' Roll - Black
- Reduce under-hood temperatures a realistic 50%
- Decreases exhaust density and increases exhaust flow
- Improves horsepower
- Added durability and heat retention - withstands 1200 degrees F direct / 2000 degrees F radiant
- Only exhaust wrap with installation guide lines
Features:
11. Lumenon LED Headlight Kit Flip COB Chips-90W 18000LM 6000K Xenon White Light (H4 9003)
- Better Visibility: Truly 60, 7600LM 6000K per set. High focus and max light output with a wider and farther lighting area, Safer Night Driving! Cool white 6000K crystal white. No dark spot, No foggy light. True watts and lumens make the headlight bulbs more endurable but seldom become dim.
- Plug and Play easy installation! No additional accessories required.
- 1 year warranty! Please contact us immediately if you experience any issues after installing our LEDs.
- USA Customer Support from 6am-12am Pacific Time. Please message us if you have questions about bulb sizing or compatibility, and we will assist you.
Features:
12. Yamaha 2C0262400000 Grip Assembly
- New OEM Yamaha Grip Assembly
- OEM Part Number: 2C0-26240-00-00
- Item only fits specific models listed. The picture could be generic.
- Message us with VIN/HULL for fast fitment verification.
Features:
13. MZS Motorcycle Bar End Mirrors Rear View CNC Compatible with Honda GROM MSX125 CB500F Kawasaki Z125 pro Z650 Z750 Z800 Z900 Yamaha MT-03 MT-07 FZ-07 MT-09 FZ-09 MT-10 FZ-10 MT-25 FZ6 FZ8 FZ6R Suzuki
- INSTALL NOTICE - Only fit Standard Hollow 7/8 Inch bar end mirrors, cannot be directly installed on the handlebar for Threaded type. If your handlebar is threaded type, you need to modify it according to the instructions in the second install picture before installation, so that it can be suitable and used.
- WIDE FITMENT - Suitable for Standard hollow 7/8 inch diameter handlebars Motorcycle Street Sport bikes Touring Chopper Cruisers.
- DURABLE MATERIAL - Adopt CNC Billet Aluminum Housing & Optical Grade Acrylic with Anti Glare Mirror for the motorcycle mirrors, it have good weather ability and smooth surface.
- WIDE VISION - This rear view mirror to increase the driver's awareness and field of vision and to remove blind spots by allowing the driver to see the vehicles and conditions behind him.
- TECHNICAL SUPPORT - We provides lifetime technical support, if you need some install picture or video, or if the 7/8 bar end mirrors damaged or have any problem, please contact us by Clicking ”Ask Product Question” beside your order.
Features:
14. Wheel and Tire Cleaner - Safe for all Wheels and Rims - Works on Alloy Chrome Aluminum Clear-Coated Painted Polished and Plasti-Dipped Rim - Wheel Cleaner by CarGuys
- ✅ CAR GUYS Wheel Cleaner is a versatile brake dust cleaner that is safe on ALL types of wheel finishes, tires, and more! It's quick & easy to use, and like all our products, it’s backed with our 100% Satisfaction Guarantee!
- ✅ Safe on ALL Rims and Tires! – Our advanced pH Neutral formula, safely removes the toughest dirt and road grime on ANY wheel or tire. Works to clean your calipers, rotors, exhaust tips, old tire dressings, and is a great whitewall tire cleaner too! Safe on alloy, chrome, aluminum, and much more!
- ✅ Quick & Easy to Use! – Nobody likes wasting time and money. Our highly concentrated cleaning gel is ready to spray right out of the bottle, but can also be diluted with water to extend the longevity of the liquid. Clings to wheels so each spray has minimal runoff, for maximum cleaning power!
- ✅ Why choose CAR GUYS? – We Care About Quality! Our products are made with the latest advancements in science, using the best equipment available. This helps us make consistently high quality products that always work great! Every formula we make is mixed and bottled, in the USA, by hard working Americans!
- ✅ We Care About Customer Satisfaction! – We're Not Happy, If You're Not Happy! If you're not happy with our product, for ANY REASON at all, get in contact with CAR GUYS anytime after your purchase, and we’ll be happy to provide a full refund. So what are you waiting for?! -- Click 'Add to Cart' Now!
Features:
15. Vagabond Motorsports VM-Y720 Fender Eliminator Kit Compatible with Yamaha FZ-07 & MT-07
- Designed to retain the factory Yamaha license plate light and ompatible with OEM Yamaha turn signals or aftermarket blinkers
- Two-piece design makes entire license plate & blinker assembly easy to remove for track days
- Lightweight aluminum construction with UV-resistant black powder coat finish
- Plug and play, all hardware & installation instructions included
- Designed and Manufactured in California. Proudly Made in USA!
Features:
16. MICTUNING Universal Motorcycle Mirrors - 3 Inch Round Folding Bar End Side Mirror Compatible with Honda, Scooter, Suzuki, Yamaha, Kawasaki, Victory, Harley Davidson and More
- CLEAR VISION - MICTUNING 3" both left and right side motorcycle mirrors with convex glass lens, offers you a high definition and wide-angle rearview vision, no more looking back while driving!
- FULLY ADJUSTABLE - Design of Ball-type connection joint and foldable holder, this round style bar end mirror can be 360 degrees rotated and freely adjusted up & down or sideway for the best viewing angle
- STURDY CONSTRUCTION - CNC Machined Aluminum alloy body with durable black coating, built for long lasting
- EASY TO INSTALL - Modern fashion style with compact size and all hardware included, it's easy to install this small mirror without modification, directly insert into hollow handlebars
- WIDE FITMENT - Widely fits to most brands of Motorbike, Sports bikes with standard 7/8" diameter handlebars, Compatible with Moto Guzzi, Honda, Kawasaki, Suzuki, Yamaha, Cruiser, Scooter, Victory and More.
Features:
17. KiWAV Universal Throttle Clutch Brake parking brake Cable End Repair Travel Emergency Repair Kit Motorcycle bicycle ATV
- Bringing an emergency clutch & brake cable repair kit, never get stuck again. This kit contains a 1mm and a 1.5mm thick cables and most common nipple fittings(barrel, pear, trunnion, slotted, screw type, etc), making this kit universal.
- Easy and organized to store this kit with a metal case. Get one for your saddlebag, seat or even your back pocket.
- Be prepared on the road every single time. Not just for yourself but a needing help stranded on the roadside biker dude, take out this repair kit and give him a hand.
- universal fit for any cable operated vehicles like motorcycles, scooters, bicycles, ATV, or golf carts.
- universal fit for most motorcycles, Brake cable: 1.5(0.06") mm dia. * 200cm. Clutch cable: 1.2(0.046") mm dia. * 200cm. 9 different sizes of clamp nipples.
Features:
18. Black Motorcycle 3' Round 7/8' Handle Bar End Rearview Mirrors For Honda Harley
19. UltraSupplier MT07 FZ07 Accessories Cluster Scratch Protection Film Screen Protector for 2013 2014 2015 2016 2017 2018 2019 Yamaha FZ MT 07 MT-07 FZ-07
Condition: 100% Brand newMaterial: Crystal Clear Premium TPU fileColor: ClearQuantity: 1 setFitment: For 2013-2019 Yamaha MT-07/FZ-07
20. CRG ARROW BAR END MIRROR
- The CRG Arrow Bar End Mirror is the ideal application for modern, performance sportbikes and naked sportbikes.
- Aerodynamic styling in billet aluminum construction gives a superior, unobstructed view of the road behind.
- In keeping with the exceptional quality of all CRG products, the Arrow Bar End Mirror is an eloquent and minimalist design.
- Unique multi-position mounting system.
- Aerodynamic design.
Features:
The buzzing on the handlebars landed me comfortably in carpal tunnel territory off the batt, with most of my right hand going numb. Yay for the 2018's hard mounted handle bars! My buddies already had these so I stopped at a random bike shop and grabbed one (was $24.95usd) and it was the best thing ever. Unlike those "cramp busters" that let you release your grip because a flap rests against your palm, these allow you to take your hand completely off the bars while the throttle stays where you set it. I find them at every random bike and atv accessories store. Made all the difference, didn't get in my way at all during twisties, was easy to effortlessly set/release without effort while riding.
I just ran premium, as that's what the manual asks for. US gas is stupidly cheap to start with, so it was substantially cheaper than regular fuel back home, and the MT07's so good on gas anyways. Cost me on average around $7usd/250km, but that was mostly in twistier roads at a good clip; if we did the speed limit I could have extended that range considerably. For how I ride it turned out 250km range worked very well as a guideline.
My shoulders where fine, as you can sit right upright on the MT07 if you wish so there's no strain on them at all.
My ass, on the other hand, was in screaming pain. The seat was simply inadequate for that kind of ride. I find it's good for up to 2 hours at a time. I'd do another ride with this seat if I had to, but I'm hoping to grab... Something, I dunno what yet, to make it better. A seat cover or something.
I brought a toolkit consisting of a Leatherman, a couple crescent wrenches, a set of Allen Keys, a multimeter, some zip ties and some metal wire, a tire pressure gauge with a length of duct tape wrapped around it, and spare universal control cables. I'd say for most people a multimeter is less important, but mine came in handy diagnosing and fixing (bypassing, rather) a friend's gimpy clutch/neutral switch.
Also packed: socks and underwear per day, a pair of spare t-shirts and a pair of pants packed into ziplock freezer bags with the air squeezed out (way more compact than just rolling clothes, AND guaranteed to stay dry), a sweater and an undershirt (layering yo! Adjust to the temperatures), a couple microfiber rags and lens cleaner for my face shield, some Tylenol, a small first aid kit (thankfully unneeded), toothpaste/toothbrush/floss/antiperspirant.
The tail bag is a Nelson Rigg CL 1060S which was phenomenal and looked really nice on the bike, and a cheap cargo net strapped over top for carrying loose stuff (removed layers of clothes, bottles of water, bag of Cheetos, etc) that I wanted fast access to.
Also had a RAM mount off the left mirror stem with a wired in charger so my phone stayed at 100% while rocking Google Maps (downloaded maps, so worked offline) and music to my Sena headset. That charger would fast-charge my phone if the bike was running, or just slow charge otherwise. Having GPS going all the time really relieved some anxiety as I could stop and take photos without worrying about losing the group. Location sharing is super helpful too once your in town; can split up and find each other again effortlessly.
God I hope this formats correctly - I am a neophyte.
Exhaust - http://www.ixilusa.com/ixil-l3xb-black-hyperlow-xl-full-exhaust-yamaha-mt-07-2014-2015/
Super deep and loud sound - videos online don't do it justice, its unbelievably loud when the baffles are out. Had to have the cat cut out of it. Be aware they have a cat in the V section before the end of the pipe.
Removed the snorkel covering the airbox - I was told its basically blocks airflow.
ECU Flash / Dyno by 2wheelDynoWorks - https://2wheeldynoworks.com/shop/ecu-flashing-service/15-17-yamaha-fz07-mail-in-ecu-flashing-service/
Nels himself worked on my bike - super stoked (shout out to Nate too) They have the best customer service.
Active Tune - https://2wheeldynoworks.com/shop/ecu-flashing-service/yamaha-activetune-afr-closed-loop-self-tuning-ecu-kit-2/
Tune as you go
Bike side harness - https://2wheeldynoworks.com/shop/ecu-flashing-service/ftlink-v1-1-6-pin-bike-side-harnesses/
For tuning later
Windscreen - https://www.revzilla.com/motorcycle/puig-touring-naked-new-generation-windscreen-yamaha-mt-07-2018
I got light smoke, I think it goes better with the bike and pushes wind over my shoulders even at 80+ mph
Protection - https://tstindustries.com/Womet-Tech-Total-Crash-Protection-Pack-for-Yamaha-FZ-07-MT-07-2015.html
Basically got everything from this except the bar ends
Bar Ends - https://motostarz.com/collections/mt-07-2018/products/rhinomoto-barends-mirror-mounts-for-yamaha-fz-mt-models
Super easy to replace mirrors etc with these - and they add protection
Throttle tube - https://www.amazon.com/gp/product/B005C59NO2/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
90 to 60 degree conversion - its amazing for the price
Dash Screen Protector - https://www.amazon.com/gp/product/B078SMP4ND/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Mirror stem deletes - https://www.amazon.com/gp/product/B07BN8QGPV/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Current Mirrors - https://www.amazon.com/gp/product/B01N6GB7DZ/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Mirrors in photo - https://www.amazon.com/gp/product/B003RESHVU/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
I like the CRG Mirrors but they get bumped and are hard to readjust - the cheap ebay/amazon mirrors work great
Headlight replacement - https://www.amazon.com/gp/product/B01H6NZ5QW/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Signal replacement LED bulbs - https://www.amazon.com/gp/product/B06XK4PL33/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Super bright replacements for stock bulbs - used the original housings, they plug right in
Running light LED replacements - https://www.amazon.com/gp/product/B00JRE38EA/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1
For inside the headlight housing
Tail Tidy - https://www.amazon.com/gp/product/B01BH5YGOM/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
Flasher Relay for LEDs - https://www.amazon.com/gp/product/B00RM26LXO/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Levers - https://www.ebay.com/itm/CNC-Brake-Clutch-Yamaha-MT-07-FZ-07-2014-2018-Adjustable-Engrave-Long-Lever/123350737715?_trkparms=aid%3D555018%26algo%3DPL.SIM%26ao%3D1%26asc%3D20131003132420%26meid%3D17a37c1b2d204ffcba65903d19a97b4a%26pid%3D100005%26rk%3D4%26rkt%3D12%26sd%3D122997203335%26itm%3D123350737715&_trksid=p2047675.c100005.m1851
Passenger peg deletes - https://www.ebay.com/itm/for-YAMAHA-MT07-FZ07-Footrest-Cover-Passenger-Footpeg-Removal-Delete-Kit-2014/253869999740?hash=item3b1bd4c67c:g:3qEAAOSw0JVbm1FQ:rk:1:pf:0
I removed the passenger pegs, needed a bracket to hold the brake fluid reservoir - also cleaned up the pegs
Havent done the brakes yet - going to replace the lines etc with steel braid.
Also want to do a sprocket / chain swap for acceleration
I used a quadlock phone mount for a little bit - but took it off because I was playing with my phone too much.
Hey y'all! Some of you asked about mods so here is a full list of what I have done so far with links.
Radiator guard - Has a nice little FZ-07 etched at the bottom.
https://www.amazon.com/gp/product/B075MCXCM7/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1
Shorty levers - Mine are gray but they come in lots of colors.
https://www.amazon.com/gp/product/B0197N3KA2/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
Bar end mirrors - You can find these for less but I chose these because the reviews indicated that they might be better quality than others.
https://www.amazon.com/gp/product/B00Q3UL6S6/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
Yoshimura fender eliminator - Kinda pricey for what it is but it looks really nice.
https://www.amazon.com/gp/product/B00T6J9IM2/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
Motodynamic integrated tail light - I also looked at the TST but after looking at some videos decided on this one.
https://www.amazon.com/gp/product/B015NN3YUG/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
Proton 500 flush mount LED - These things are brighter than the sun. You can also change the signal pattern which I thought was cool.
http://www.hightechspeed.com/products/Proton500/yamaha.html
Flasher relay - Prevents hyper flash and let me get rid of resistors.https://www.amazon.com/gp/product/B00RM26LXO/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Stompgrip volcano black - I really like these and they have great grip. You can also get them in clear from their website if that's your thing.
https://www.amazon.com/gp/product/B018NH74BE/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Akrapovic TI - This exhaust sounds sweet, I also purchased the CAT for it through cyclegear.
https://www.amazon.com/gp/product/B00L44J56G/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Other mods that i'm considering in the future
Stainless Steel braided brake lines, FTECU on the bike flash kit, T-Rex Racing no cut combo.
Bonus - https://i.redd.it/en8vfnpv46u01.jpg
Got the headlight H4 LED from Cyclops. Looks like they're out of stock right now: https://www.cyclopsadventuresports.com/Cyclops-100-H4-LED-headlight-bulb_p_192.html
It was super easy to install and fit very well.
​
For the parking lights I got these: https://www.amazon.com/gp/product/B071LHP5WP/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
It’s not hard, just take your time with it and make it looks pretty. I used 1” wrap, I like the look of a tighter wrap though. And it claims to “increase performance” because your keeping more heat away from the engine, not sure if I buy that or not, I did it for cosmetic purposes tbh lol. I think it looks awesome, here’s a link for the stuff I used :)
Wrap-
Design Engineering 010107 Exhaust Heat Wrap, 1" x 50' Roll - Black https://www.amazon.com/dp/B000E267JM/ref=cm_sw_r_cp_api_i_KoGjDb06KEJQT
High temp Silicone paint-
Design Engineering 010301 High-Temperature Silicone Coating Spray - Black https://www.amazon.com/dp/B000MY3ML8/ref=cm_sw_r_cp_api_i_LvGjDb07SXQKQ
https://www.amazon.ca/Complete-system-exhaust-Yamaha-2014-2017/dp/B07CBQBJW2/ref=sr_1_1?keywords=anodizing+exhaust+fz07&qid=1563944991&s=gateway&sr=8-1
​
Mine arrives tomorrow, buddy of mine got one for his MT09 and sounds AMAZING, for the price it has amazing reviews.. I was going for akra also but I had to go with this one for the fact its literally only $260 and i've heard it in person... the only thing is it doesn't come with instructions but there are youtube videos (US AMAZON shows like +30 4 and 5 star reviews, nothing less)
https://www.amazon.com/gp/aw/d/B000WJ7OIA?psc=1&ref=yo_pop_mb_pd_title
That’s what I used according to my amazon purchase history. I swapped mine when I installed oxford heated grips nearly a year ago and honestly, I usually don’t even remember I swapped it lol. But you will notice right away at first.
If you are careful you can save the stock grip using compressed air and lightly prying under it with a flathead screw driver or something similar.
Went with the simple TST industries, not to sure if i'll like the only top bolt mounts but we will see.
https://www.amazon.com/gp/product/B01DAMH7ZA/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Also did the MD integrated tail light and i love that.
https://www.amazon.com/gp/product/B015NN3YUG/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
It's this one from Amazon: https://www.amazon.com/gp/aw/d/B00NS1IA78/ref=pd_aw_vtph_0_bs_2?ie=UTF8&psc=1&refRID=HT7YKM3C1CAVVN5E7RJ7
It works well but the one they sent me, the two base plate screws didn't line up, so I was only able to screw it in with two of the four screws. So far it's holding great though!
Also, make sure you keep your left and right signals separate if you use the stock signals, otherwise you will end up putting them on the opposite side like me.
I have the similar mirrors in the link you provided. I bought these. They will fit the same way as the video above with stock bar ends and some modification or with the mount they provide with stock bars (some modification maybe).
The way they fit is how all the bar end mounts work and that is the rubber piece needs the be tighten before inserting it into the bar. Once its snug you can tighten further for a better fit. I ended up getting Woodcraft clip ons and bought the bar ends with guard mounts to mount my mirrors.
I can't recommend the R6 throttle tube mod enough. I did the mod last weekend and have been riding for a few days with it in place and it is glorious. The best $9 I've ever spent.
This guy walks through the install step by step
https://www.youtube.com/watch?v=NhgvJkpdSDE
The link to the part
https://www.amazon.com/Motion-Pro-01-0094-Throttle-Sleeve/dp/B000WJ7OIA?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
I installed an LED headlight. It added a lot more visibility at night. Took 10 minutes or less to do.
https://www.amazon.com/gp/product/B01KFBPBC0/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1
Also added white LED run lights so the entire front is bright white
https://www.amazon.com/gp/product/B00JRE38EA/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
​
I watched these two videos for any help.
https://www.youtube.com/watch?v=yCoOcn9yuIE
https://www.youtube.com/watch?v=ehZbBUxD67w
Unless your commutes consist of you pinning the throttle and soaring through neighborhoods / highways at speeds of 100MPH, I'm sure you'll find yourself enjoying the FZ07.
If your commutes do consist of that kind of riding, I would recommend getting a wind screen and replacing the throttle tube with this. That way your arm isn't underneath the fucking bar when wide open.
Edit: note: the tube on Amazon will say it is incompatible with the FZ07, ignore that.
https://www.amazon.com/dp/B079KBDC9Q?ref=ppx_pop_mob_ap_share heres the link. I have them as well. Not sure if I'd recommend though unless you get other adaptors. They look nice though.
I bought some LED lights from amazon that are really bright. Here is a link to what I bought: https://www.amazon.com/gp/product/B07RYPNW4G/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 https://www.amazon.com/gp/product/B071LHP5WP/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
I have a 2016 and when I first got it home I had a real issue with lurching and choppy throttle response. I did a little reading and found out it was pretty common and that most people fixed it by changing the throttle tube.
Amazon says I bought this, although the description and price are a little different now than when I bought it.
Swapping the throttle tube was night and day. The bike responds like it should when you twist the throttle and there is no longer a choppy feeling when I shift.
I have the Night Fluo and I love the look of it. Honestly regarding the wheels, they aren't as big as a problem as people make them out to be. I clean them maybe once a week and they always look relatively clean regardless. Especially the front wheel. The chain is what makes the rear get dirty much faster than the front. I use this spray to clean them https://www.amazon.com/Best-Wheel-Tire-Cleaner-Amazon/dp/B014V9GFJU . It may be the reason mine don't get as dirty as everyone claims they do, but it's a non-issue in my opinion.
Arrows are a waste of money honestly. Imitation ones from Amazon work well and fit. https://www.amazon.com/gp/aw/d/B079KBDC9Q?psc=1&ref=ppx_pop_mob_b_pd_title
Was able to use even with bar end slider because they give a long bolts I just had to trim.
https://www.amazon.com/gp/product/B07FCCJR87/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
I got these and assembly is super strong, it's not moving anywhere. and it's only 16$
I had to replace CRG ARROW because my idiot boss broke them on purpose. Ripped it off with his hand.
$72 each? I'd try my luck with these $16/pair first:
https://www.amazon.com/MICTUNING-Universal-Motorcycle-Mirrors-Kawasaki/dp/B07FCCJR87/ref=sr_1_4?ie=UTF8&qid=1537141564&sr=8-4
I bought it off amazon. But you can get just the tube as well. Or the motion pro for a slightly less aggressive effect. https://www.amazon.com/YAMAHA-2C0262400000-Yamaha-Grip-Assembly/dp/B005C59NO2/ref=mp_s_a_1_3?keywords=Yamaha+2C0262400000+Grip+Assembly&qid=1565977871&s=gateway&sr=8-3
Sounds like you may not have gotten the LED compatible relay. It's like $8, I'll grab a link
Edit: http://www.amazon.com/gp/product/B00RM26LXO/ - $8.99 shipped with Prime. You have to go under your front "tank" fairing on the left to replace the OEM, but it's just a matter of undoing a bunch of small fairing bolts and a couple plastic panel poppers.
I’ve got the vagabond tail tidy and I like it. I reused the factory turn signals and it was a simple install
Motion Pro 01-0094 Throttle Sleeve https://www.amazon.com/dp/B000WJ7OIA?ref=ppx_pop_mob_ap_share
Heres the direct link.
Motion Pro 01-0094 Throttle Sleeve https://www.amazon.com/dp/B000WJ7OIA?ref=ppx_pop_mob_ap_share
Picked up a bone-stock 2017 FZ-07 two weeks ago for an absolute steal. Have been steadily adding a few mods. Let me know what you think!
Motodynamic Integrated Taillight
Motodynamic Fender Eliminator
Motodynamic Flush Front LED Signals
Amazon Shorty Levers
Reflective Rim Tape
R6 Throttle Tube (Pending Install)
Akrapovic Titanium full exhaust (Pending Install)
Cyclops 7000 Lumen LED Headlight
Tank Pads
_
Next up on the waiting list -
Fuel controller/remap/powercommander - still undecided which, let me know what you prefer!
x2 CRG Arrow Mirrors
Woodcraft Clip-ons