Best products from r/FocusRS
We found 17 comments on r/FocusRS discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 13 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Muteki 32906B SR Series Black 12mm x 1.5mm SR48 Open End Lug Nut Set, (Set of 20)
- Extended 48 millimeter length open ended design with knurled ends; can be removed with a 17 millimeter socket
- Each SR48 lug weighs just under 2 ounces
- Extended 48mm length open ended design with knurled ends
- Can be removed with a 17mm socket
- SR48 lugs weigh just under 2 ounces. Compact size to fit small diameter wheel holes
Features:
2. 5w50 Ford Motorcraft XO-5w50-QGT Full Synthetic Motor Oil 12 qt case
- Recommended by Ford Motor Company for use in the Ford GT, Shelby GT-500 and Boss 302
- This oil is compatible with other synthetic and petroleum based formulations
- Use according to owner guide recommendations
- Formulated for automotive use
- It meets API service category SN
Features:
3. VViViD Air-Tint Smoke Black Gloss Vinyl Headlight Foglight Transparent Tint Wrap Self-Adhesive (16 Inch x 48 Inch, 2-roll Pack)
- VVIVID Air-Tints are an industry first: a headlight/taillight tint with all of the technologies developed in VVIVID+ premium materials. They include an air-release membrane which allows you to install the tint dry ( without installation liquid ) Ready to use out of the box!
- This is the only film on the market that can wrap ANY SHAPE. It is super conformable with heat. It was originally manufactured for hard-to-wrap surfaces, but the ease of install has professionals saving time on any headlight shape.
- This film is also self healing and scratches will go away with heat! Simply cut the vinyl to shape, and apply it to the surface. To make the vinyl conform to curves, simply heat with a heat gun or hair dryer, stretch and apply. Lastly, using a sharp blade, trim away excess from the headlight and you're done! its literally that simple!
- Made with automotive grade cast vinyl, these tints are 80% tinted smoke or 20% VLT. The adhesive is acrylic based which will not eat through plastic like other tints on the market. It is 100% chemical safe, and will not eat through headlight coatings or damage your lights.
- NOTE: MAKE SURE TO MEASURE YOUR HEADLIGHTS AND ORDER ENOUGH VINYL TO WRAP THEM
Features:
4. Adam's 20" Fender & Tire Brush - Long Handle to Reach Those Hard to Reach Wheel Wells - Durable Premium Quality Flocked Nylon Bristles
✅ LONG 20” HANDLE TO REACH THOSE HARD TO REACH WHEEL WELLS - During the cleaning process, our suspension components are neglected as they’re tucked away and not the readiest area to clean-- Adam’s Fender Brush features a 20” handle and long, flagged nylon bristles to reach your shocks, str...
5. Razo RP82A Sport Accelerator, Large
Track derived aggressive design that's made of polished and durable aluminum alloyInfinite heel plate adjustability for easier heel-and-toe operation and the ultimate tracking driving experienceGrippy surface reduces slippage and encourages confident foot workAttach with custom mounting bracket
6. POTAUTO Universal Aluminum Grooved Magnetic Jack Pad Jacking Puck Pinch Weld (Slot Width 0.39 Inch) Frame Rail Adapter (Qty 1, Red)
- ▼ Reinforced structural support at base and corners. Stronger, more durable!
- ▼ This large slotted jack pad is designed to fit the pinch weld width 0.39" on most vehicles' body, in order to jack up vehicles safely without any damage to the pinch weld or Rocker Panel.
- ▼ Each Jack Pad comes with 2 installed strong magnets in the slot for better holding strength while placing jack and lifting vehicle.
- ▼ Fit most vehicles with pinch weld at least 3" long. The slot opening of this jack pad is 0.39" width X 3" length. Slot depth 0.625". Base diameter 3".
- ▼ CNC Machined from first grade aluminum, and red / black anodized. Plastic padding insert to protect pinch weld.
Features:
7. CAR ROVER H11 H8 H9 LED Fog Lights Lamps Replacement - Dual Color In 1 (6000K/3000K) - Pack of 2
- Fits 2014-up Jeep Renegade side marker turn signal lights.
- Smoked lens side marker lamps plus a pair of amber yellow LED sidemarker lamp replacement bulbs.
- Plug and play installation with no modification required. Direct replacement of stock light assembly. No special relay needed. No need to replace bulbs again.
- Super bright LEDS have a faster on/off response time for driving safety & Perfect design enhances your car's exterior look.
- Waterproof IP65, shockproof, dustproof, 50000+ hours life-span, ONE YEAR WARRANTY.
Features:
8. Aluminum Skid Plate, Engine Splash Shield for Ford Focus RS
Powder Coated, type 5052, .09" Aluminum. Excellent strength/weight ratio, a significant protection upgrade from the factory undertray.Air inlets are modeled after the OEM air inlets, to prevent loss of cooling while maintaining superior protection.Included hardware replaces the cheap factory fastene...
9. Highland (9501300) Black Three-Pocket Storage Net
- Net size is 44 inch to 56 inch wide and 14 inch deep for smaller items
- Stretchable net to adjust to fit where needed
- Adjust to fit most trunks, pickup truck beds or SUV rear cargo space
- Three pockets for better organization
- Fits most vehicles
Features:
10. Vailge Dog Car Seat Covers, 100% Waterproof Scratch Proof Nonslip Dog Seat Cover, 600D Heavy Duty seat Cover for Dogs, Dog car Hammock Pet Seat Cover for Back Seat car Trucks SUV
SIZE - Compare other pet car seat cover, Excellent size of 56" Wide x 60" Length are larger. Our product covers the entire back seat and perfectly protect your car from scratches or mud. It designe for most backseats of STANDARD cars, trucks & SUVs. Easily convertible between hammock or standard ben...
11. TANGSEN Key Fob Case for FORD C-MAX FOCUS RS FIESTA 3 Button Keyless Entry Remote Carbon Fiber Pattern ABS Black Silicone Cover
- Compatible with FORD C-MAX, ESCAPE, FIESTA, FOCUS, FOCUS RS, FUSION … Etc. 3 Button Keyless Entry Remote (Please check the shape of the keyless entry remote before ordering)
- [DOUBLE PROTECTION] comes from the double layered structure of the case. The protective cover is made of ABS plastic and coated with a scratch-resistant UV curable coating. The buffer cushion is made of soft, non-toxic and odorless silicone rubber material. It almost covering the whole key fob and only the surface of the buttons and the edge of the cover are exposed, which makes the buttons easier to press and the edge cushioned and non-slip. 商品特性
- [PERSONALIZATION] This sports-style key case has three themes for you to choose: Carbon & Black, Carbon & Red, Carbon & Blue.
- [PERFECT FIT] It does not cover the brand Logo, does not affect the signal transmission, the button position is accurate, the size matches the car original key fob exactly.
- If you have any questions when you received the goods, please contact us first. We will provide the best after-sales service. [NOTE] Your car model and year may not be listed, and the listed models also have keys of various shapes. Please confirm whether the shape of your key is the same as photo 4 before ordering.
Features:
12. HyLoft 01031 Folding Storage TireLoft, 32 to 48 Inches Wide, Supports 300 Pounds, Silver
- TireLoft can be adjusted from widths of 32 in. up to 48 in.
- All steel construction with scratch-resistant silver powder coat finish
- Ideal for storing seasonal tires, RV tires, ATV tires, and more
- Holds up to 300 lbs.
- Hardware included
Features:
13. TEKTON 6943 Precision Pick and Hook Set, 4-Piece
- Includes 1-pc. full hook; 1-pc. 45-degree pick; 1-pc. 90-degree pick; 1-pc. straight pick
- Ultra-fine tips precisely probe, pierce, pry, pull, and position small parts in tight spaces
- Soft, deeply textured handle grips offer a comfortable, nonslip hold
- Knurled sections on shafts give an extra measure of fingertip control and maneuverability
- Hardened steel shafts resist bending under stress
- Heat treated, chrome vanadium steel shafts
- Cushioned, non-slip grips for extra control
- Knurled shaft grip area for precise work
- Ideal for assembly, repair, or removal of small parts
Features:
No problem! Pretty much my entire time owning the car I've been trying to find the best tool to clean the wheels. Adams wheel brush has been my main tool so far, able to fit through the gaps in the alloy wheels and you can fit it behind the rear rotors to clean the inside of the wheel. I use the WollyWormit for everything else
I know what you mean. Try this. RAZO RP82A Sport Accelerator, Large https://www.amazon.com/dp/B000CPCQHS?ref=yo_pop_ma_swf
It doesn’t directly fix the flex but i think it helps and it’s cheap and easy to install. I really like it.
There is an arrow on the side for where to jack on the pinch weld.
I use these for supporting the pinch (0.39"): Jack Pad Pinch Weld Puck
I also use a Harbor Freight Jack and that works pretty well, especially for the price: 1.5 Ton Jack
In regards to where to place your jack points, there is a solid diagram to show you where to place your jack and stands: Diagram
https://www.amazon.com/gp/product/B004QHOOE6/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1
​
I have these and I have had good luck with them. The paint has held up to two seasonal wheel swaps and a round of balancing.
I've been buying it off Amazon, it's the best deal I can find.
https://www.amazon.com/dp/B00MWCROVW/ref=cm_sw_r_cp_apa_i_q4qFDb3R0TP41
Aluminum Skid Plate, Engine Splash Shield for Ford Focus RS https://www.amazon.com/dp/B07K4Q6YPV/ref=cm_sw_r_cp_api_i_-IDVDb7TR844K
This one is the highest rated one on FocusRS.org https://i.imgur.com/seLDl3H.jpg
It’s expensive but it’s cheaper than a new oil tray+install and that peace of mind is priceless
You need a net for when u have less groceries, and u don't want them falling and rolling.
I have this one. It works okay. Could be better.
Highland (9501300) Black Three-Pocket Storage Net https://www.amazon.com/dp/B00076QA4C/ref=cm_sw_r_sms_apa_i_lqLGDbTRQER5K
if you're good with vinyl you can wrap your tail lights, $20 on amazon; https://www.amazon.com/VViViD-Air-Tint-Headlight-Transparent-Self-Adhesive/dp/B01M1KRMQZ.
turns them dark cherry instead of lipstick red.
Here's the link to Amazon. 12 quarts (2 changes worth) for $105 https://www.amazon.com/5w50-Motorcraft-XO-5w50-QGT-Synthetic-Motor/dp/B00MWCROVW/ref=sr_1_fkmrnull_1?keywords=motorcraft+5w-50&qid=1550087108&s=gateway&sr=8-1-fkmrnull
https://www.amazon.com/TANGSEN-Fiesta-Keyless-Pattern-Silicone/dp/B07SH6XB4G/ref=mp_s_a_1_1?keywords=focus%2Brs%2Bkey%2Bfob&qid=1572556276&sprefix=focus%2Brs%2Bkwy%2B&sr=8-1&th=1&psc=1
https://www.amazon.com/dp/B07DCT6SPY/ref=cm_sw_r_cp_apa_i_8PWgDbX5ATFQR
Get one of these before your backseat is toast.
I got a thing on amazon for mine so they don't effectively take up any room during the off season.
Link here (not a referral link, I'm not making anything off this)
Use a pick set. I got a set at Northern Tool after tearing my car apart and getting to a point where I was so frustrated I almost just gave up and put it all back, but asked around in my local ST/RS Facebook group for ideas on how to remove the damn clip.
https://www.amazon.com/dp/B000NPPBQK/ref=cm_sw_r_cp_apa_i_MmJkDb8YT215N
I also couldn't remove the idiotic, corroded Torx bolt holding on the heat shield, so just wound up bending it back as far as I could.
Finally was able to pry off the clip whilst tearing up my hand a ton, but totally lost the clip. Make absolutely sure you don't do that.
They don't just sell the replacement from Ford as it's considered a part of the entire turbo assembly, and other parts you'll find when Googling aren't a fit. I'm currently running the TurboSmart WGA without the clip and it's been fine for about 4 months (since there's so much tension on it from the actuator arm), but sometimes I worry the arm will slip off, and the process to fix WON'T be fun.
Hope this helps.