1. Get one of these
   
2. Connect it and fill it partially.
   
3. Turn the car on and let it warm up.
   
4. Watch and see if bubbles come through the funnel. It's important you maintain the level in the funnel. As air comes out of the system the fluid will drop. So always have enough fluid.
   
5. As you're doing this keep your heat blasting.
   
6. Rev car, maintain fluid level, than check to see if hot air is there yet. Repeat over and over.
   
7. Still no hot air? Go to your bleeder valve.
   
8. Crack your bleeder valve. Don't screw it all the way off. Just crack it. If you have air stuck there it will look like you're opening a soda. Like bubbles seeping out edges.
   
9. Watch it until you see fluid pushing out.
   
10. Go back to your car that is still on and running and check your heater.
    
11. No heat or some heat is normal. You should feel some heat.
    
12. Keep going back and forth between cracking the valve and checking your heat. Do this over and over and you should slowly see your heat come back. Also revving your engine pushes the fluid around faster so do that as well.
    
    Notes: while you're doing the funnel method, the fluid may start to boil and and quickly rise causing it to over flow. Always keep an eye on this. Immediately turn off your car and wait about 30 mins and continue.
    
    Also, your bleeder valve is just a plastic screw that can easily get stripped with all of the opening and closing. Make sure your screw driver is an exact fit. Also, it helps to support it from the bottom when pushing down to open or close it. Wear gloves.
    
    If you can, raise the front end of the car on ramps or something. It helps the air move.

I had an infiniti (not the car brand) cd slot phone mount. I think it worked the best. Kind of got in the way of the AC buttons a little, but it wasn't that big of an issue. I had a vent mount in my truck once, didn't like it blocking my vent at all, so I wouldn't personally recommend those.

Right now I have a suction cup mount at the top left of my windshield. It's never in my way and I can easily see who is calling or fast forward to the next track while never taking my eyes off the road.

Another thing to consider when looking for a mount is there are two types of mounts as far as how they hold your phone, one grabs it from the sides, the other is magnetic. I like the magnetic ones. You put a thin metal sheet between your case and phone, or under your battery cover if your phone will allow it(if you have a battery cover and the back goes back on with the sheet in there). The downside is it interferes with wireless charging, which I don't use anyway.

Edit: looks like infiniti isn't on Amazon or whatever. Here is the exact same thing. WizGear Rectangular Head Universal CD Slot Magnetic Car Mount Holder, for Cell Phones and Mini Tablets with Fast Swift-Snap Technology https://www.amazon.com/dp/B01K52AE4E/ref=cm_sw_r_sms_apa_difrzbSAW8RC5

ToughPRO Infiniti G35 Floor Mats... https://www.amazon.com/dp/B01LJ766BY?ref=ppx_pop_mob_ap_share

I got these and am happy with them. Thin. Look cool. Do the job. Fit perfectly.

I used the aux kit and added a bluetooth amp for 50 bucks.

Car connects when it turns on and can play music just fine without some bullshit FM transmitter. Cost $100.

All wireless and the voice works as well.

You wire everything into the armrest and I drilled holes for the transmitter placed just below the stick shift. Barely noticeable and I can switch songs very quickly;.

I thought I would be buying a double din setup down the road but I am very impressed with this setup so far. My phone can stay in my pocket all the music and calls work seamlessly.

I think if I did my speakers I would just add a 4 channel amp in the trunk and bybass a headunit all together.


Before I bought the bluetooth dongle I just plugged phone directly into the aux kit using it's 3.5mm. I thought the dongle would drop quality over the phones built in amp but I have noticed no difference and now it's fully wireless and has a built in mic for calls.

Here's my setup:

Aux Kithttps://www.amazon.com/iSimple-ISNI531-Automotive-Auxiliary-Infiniti/dp/B0072L7W7O/ref=sr_1_2?keywords=g35+aux+kit&qid=1571875449&sr=8-2

The amp- This one works great turns on and off with car.

https://www.amazon.com/TaoTronics-Bluetooth-Hands-Free-Microphone-Cancellation/dp/B0769DXZTV/ref=sxin_4_osp48-96dd736e_cov?ascsubtag=96dd736e-c0e4-4c96-99e7-fa0f3d21e869&creativeASIN=B0769DXZTV&cv_ct_id=amzn1.osp.96dd736e-c0e4-4c96-99e7-fa0f3d21e869&cv_ct_pg=search&cv_ct_wn=osp-search&keywords=car+bluetooth+receiver&linkCode=oas&pd_rd_i=B0769DXZTV&pd_rd_r=8d2fbcf6-71bf-405e-9764-04801f0a8240&pd_rd_w=D03Wj&pd_rd_wg=sXdZq&pf_rd_p=a23a388c-add5-49df-b293-a31ade89c6bf&pf_rd_r=1ZFRS8ED3NNK4AR3BD1X&qid=1571875483&tag=spyonsite-20

Thanks, and I’m using a Mishimoto catch can. I had to drill 2 small holes to mount it, it was pretty easy to install.

The FM transmitters are trash don’t buy them.

Buy a cassette adapter, buy a female to female aux adapter, buy a aux to Bluetooth adapter.

This is the set up I have and it works great.
Links.


Arsvita Car Audio Cassette to Aux Adapter, 3.5 MM Auxillary Cable Tape Adapter https://www.amazon.com/dp/B07N2KPTGW/ref=cm_sw_r_cp_api_i_nXiQDb4NKQKEA


3.5mm Stereo Jack to 3.5mm Stereo Jack Female to Female Adapter Connector Gold Plated (3 Pack) https://www.amazon.com/dp/B01C9U3XI4/ref=cm_sw_r_cp_api_i_vYiQDb2JKARK9


Bluetooth Adapter for Car, CHGeek 3.5mm AUX Input Dual USB Car Charger 5V/4.8A Hands Free Calling V4.2 Bluetooth Wireless Receiver Adapter for Home Car Stereo Audio System https://www.amazon.com/dp/B07RWB7LZN/ref=cm_sw_r_cp_api_i_7YiQDb52TD3E7

SYLVANIA - Headlight Restoration... https://www.amazon.com/dp/B00429NKWK?ref=ppx_pop_mob_ap_share

I used to work in a shop and we used to have the gs guys do these.100% beginner friendly just follow the instructions.Everything is done by hand.

The name brand Philips D2R are on sale right now for ~$32 on Amazon.

The brightest D2R is this.

>I can’t see shit at night

Before replacing any bulbs make sure the headlamp lens is clear and not yellowed. If yellowed/hazy then polish it out.

Solution Finish Black Plastic & Vinyl Plastic Trim Restorer - Car and Truck Polish - 1 oz. https://www.amazon.com/dp/B006NZQ3T8/ref=cm_sw_r_cp_api_hO03Bb43GZ7Y0

This is the one I got and still have 3/4 left after 2 times use. Dont buy the big bottle because you only use it as little as you can. There a lot of youtube video out there. And it safe for paint to so dont have to tape everything.

If you buy one I would try and get a small skinny one. The one I bought was too big and the in/ out lines were opposite and made it hard to install.

The one I bought:
Ruien Polish Baffled... https://www.amazon.com/dp/B06XK9PTP7?ref=yo_pop_ma_swf

I just ran a line from the pcv to the “in” on the catch can then from “out” into the intake. Mounted in to the power steering bracket. Considering doing something with the rear line as well but everyone seems decisive with how to install a catch can.

Just used the 3M headlight restoration kit (with rotary/drill attachment) and also used this Meguiar's headlight coating
to seal it in a little. Been over a year and still lookin fresh!

This is the adapter for the Bose version.
https://www.amazon.com/Stereo-Harness-Infiniti-wiring-installation/dp/B008FT3K14

You need something like to install without major splicing.

You have the exact same model I do. I'd recommend this as a good first mod. Makes it sound beefier:
https://www.amazon.com/STILLEN-403235-Z-Tube-Without-Intake/dp/B000HL10PQ/ref=sr_1_1?ie=UTF8&qid=1492025835&sr=8-1&keywords=z+tube

See my post about the track info ? We only tried Spotify but I can try some other apps if you want.

I'll repeat, with Spotify, the steering wheel controls do work.

Here's the page with the item's info: https://coolstreamrocks.com/what-is-the-coolstream-carpro/ . You need to go through their "selector" tool, pick "BMW" compatibility, and you should end up with "CarPro - Bluetooth Receiver for BMW Mini Cooper iPod Y Cable" as what they'll spec for you. You also need a power-inserter. Their website points to one from CableJive but it costs over $60 now. I asked them about that and they now point people to this one: https://smile.amazon.com/gp/product/B0026AG38K/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1