Best products from r/GasBlowBack
We found 8 comments on r/GasBlowBack discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 8 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. XLX 225Pcs 12 Sizes Rubber O-Ring Gasket Silicone Sealing Repair Box Washer Seal Assortment Set for Plumbing Automotive General Repair
- Ultimate Compatibility: Compatible with most action cameras, including GoPro Hero10, 9, 8 , GoPro Max, GoPro Fusion, and its earlier models. Also suitable for DJI Osmo Action, Insta360, AKASO, APEMAN, Campark, SJCAM, etc
- Straps for Head, Chest & Helmet: Designed for all head sizes and body shapes, the straps secure the camera on your head and chest for taking breathtaking POV shots of surfing, skateboarding, parachuting, and bungy jumping. The helmet strap tightly fastens your camera on a helmet for road biking races, mountain bike trails, and BMX
- Wrist Strap & Floating Handle Grip: The wrist strap with a 360° rotatable mount is easily adaptable to fit your wrist and arm for taking shots from different angles. The floating handle grip keeps your camera afloat in the water when swimming or snorkeling
- Handlebar Mount & Suction Cup: Handlebar mount fits bars of 0.75”–1.4” (1.9–3.6cm) in diameter on your bike and motorbike and allows 180° tilt movement. Suction cup attaches your camera to the car for in-car footage
Features:
2. Sightmark Ultra Shot Reflex Sight
- Interlok Internal Locking System, Composite Body With Metal Protective Shield
- Multi-Reticle (4 Patterns), Adjustable Reticle Brightness
- Wide Field Of View, Perfect For Rapid Fire Or Moving Target Shooting
- Unlimited Eye Relief and Parallax Corrected for Precision Accuracy
- Lightweight, Water Resistant, and Shockproof
Features:
3. Sightmark Ultra Shot Reflex Sight Quick Detach Digital Switch
Digital switch reflect sight ideal for close-range, fast-moving targetsSwitch button on the side for adjusting variable brightness settingsWeaver quick-detach mount; protective aluminum shield hood105-foot field of view @ 100 yards; infinite eye reliefTactical matte black color; water resistant; lim...
5. J.W. Winco A81760 DIN6319C Spherical Seat Washer, 15 mm I.D, Steel
- Used for clamping on non-parallel surfaces
- Used in conjunction with DIN 6319 D spherical dished washers, to compensate uneven clamping surfaces
- RoHS Compliant
- Fits bolt thread size M14
- Steel, case hardened and phosphate
Features:
6. 002 Silicone O-Ring, 70A Durometer, Red, 3/64" ID, 9/64" OD, 3/64" Width (Pack of 100)
- Made of silicone for use with a variety of chemicals and fluids
- Can be used across a wide temperature range from -65 degrees F (-54 degrees C) to 450 degrees F (232 degrees C)
- Round in cross-section to provide a seal between cylindrical overlapping surfaces
- Durometer (hardness) of 70A for resistance to penetration
- Meets standards defined by Aerospace Standard AS568A
Features:
7. OneTigris Minimalist Pistol Holster for 1911 45 92 96 Glock (Coyote Brown)
- Wrap-around Design Universal Gun Holster: Fully adjustable & customizable with multiple hook-and-loop straps to fit most of compact and medium to full sized pistols(Compatible with 1911/Glock 17 19 20 21 22 40 44 45/Bretta 92FS/S&W M&P shield 9mm/Sig Sauer P226 P229 P320/Springfield XD/Tp9sfx/etc.)
- Wrap-around Design Universal Holster: Fully adjustable & customizable with multiple hook-and-loop straps to fit most of compact and medium to full sized pistols(Compatible with 1911/Glock 17 19 20 21 22 40 44 45/Bretta 92FS/S&W M&P shield 9mm/Sig Sauer P226 P229 P320/Springfield XD/Tp9sfx/etc.)
- Cross-draw 1911 Holster: It fits for most pistols with or without different light/laser sight or other rail-mounted accessories beneath the barrel
- Button-Clasp Release for Double Security: Great for gun carry、storage and transportation.
- Multiple Applications: Everyday use, home defense, range trip, hiking, backpacking, airsofting
- MOLLE Compatible Holster: It works well with backpack, belt, drop leg rig, chest rig, molle vest, range bag, sling bag, molle panel or other web gear
Features:
Aight, fair warning though, some of this stuff is currently out of stock and I don't know when they'll be restocked and it's been a while since I ordered some of these parts, but I'm pretty sure they're all sitting in my gun at the moment.
​
Also, if you need help installing anything or have any questions, feel free to hit me up.
​
Let's preface this with some general stuff that you should have on you:
A set of O-rings won't hurt to have, even if you only need the smallest ones
Superglue also doesn't hurt to have, I had to use some
​
Starting from the Magazine:
Extended mags are always nice to have
Nine Ball high flow valves
\^ For these, you're gonna want to replace the O-ring on the moving piston of these with smaller ones from that box, then glue it in place. I had an issue where the standard sized one would shift on me when I fired, which really hampered the amount of gas released then kept the valve from closing all the way, leading to the magazine leaking out after one anemic shot. Replacing the O-ring and gluing it in place fixes that
​
Going to the actual gun:
Poseidon ICE Breaker Piston Head
\^ Installation's a bit funky, you're gonna want to take the screw from your factory piston head and use that with this piston head without the factory cup looking thing that comes with it
DP Enhanced Rocket Valve
\^ This one's pretty simple, just a drop-in piece
Action 150% Enhanced Hammer Spring
\^ I Think this is what I ordered, it looks pretty similar and if memory serves you should install it with the tapered end down
A+ 6.01 Precision Inner Barrel & Rubber Set
\^ Really just a simple drop-in, don't lose your gun's hop-up bead!
RA-Tech Steel threaded outer barrel
\^ This one is kind of weird, and will need three O-rings to get working to its greatest potential. When I first dropped this part in, my gun was literally chewing up BBs and spitting plastic chunks out. To remedy this, use two more O-rings from that box and put them around the inner barrel, this fixed the problem for me. The last O-ring is a real steel part and goes into the groove on the outside of the barrel and is there mainly to improve accuracy. Plus, the barrel doesn't come with a thread protector so you'll want to pick one up separately, the barrel uses 16mm CW threading
​
Bonuses; stuff that you could pick up and use, but I haven't for whatever reason:
Sights: I use the standard sights because pretty early on I poked out the little white plastic dots and replaced them with glow paint, as well as custom mounting a fiber optic holder for the front sight (PM me and I'll send you the STL) but you could give the tactical sights a try
USP Tactical Front Sight
USP Tactical Adjustable Rear Sights
USP Comp-Tac Front Sight
USP Comp-Tac Rear Sights
\^ The compact tactical sights look like they'll fit on the standard slide, but I don't know. Front sights are held in by friction and should be glued down, Read sights are held in by a hex screw that goes in through the BBU
​
Recoil Springs; I bought these, then realized that since I live in Massachusetts, it's too cold most of the year to actually use them to their greatest potential
Enhanced Recoil Springs
\^ Only the big one on the outside actually does anything, so you only need to worry about installing that one
These are for real steel guns, and feel really solid, I have no doubt they'll work on GBBRs, but I have an aeg, so I can't base that on personal experience.
I have a Sightmark Ultra Shot QD and it's fantastic. Big glass, multiple reticle, really solid, bright(works in direct sunlight), qd works. I'm very happy with it.
They also make a non-digital non-qd version that's even cheaper, but I really like the QD.
Good luck
A small red dot like a RMR replica, fastfire, or the LaRue Pride Fowler IronDot seen here
http://prometheus.med.utah.edu/~bwjones/wp-content/uploads/iblog/MP7%20Gemtech.jpg
Edit The vortex sphinx is a good price
http://www.amazon.com/Vector-Optics-Sphinx-High-Quality-Red-Dot/dp/B00821TQN6
Joule creep. Seems pretty common with GBBRs.
I don’t have a link - I had it sitting in a bin of small parts. No telling where i got it from originally. It looks more or less like this one: https://www.amazon.com/Winco-A81760-DIN6319C-Spherical-Washer/dp/B00S6BZH6C/ref=lp_16410941_1_5?s=industrial&ie=UTF8&qid=1572709074&sr=1-5
002 Silicone O-Ring, 70A... https://www.amazon.com/dp/B000FMYEO6?ref=ppx_pop_mob_ap_share
I use these for my GBB M4 Mags