Best products from r/GrassHopperVape
We found 65 comments on r/GrassHopperVape discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 38 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Nitecore LUC V4 LCD Universal Battery Charger for 10440 / 18350 / 14500 / 18500 / 16650 / 18650 / 26650, Purple
- Protects from over-discharging, over-voltage, short-circuit and reverse polarity
- USB output for charging cell phones
- Functions as a portable power bank
Features:
2. Case Star Bohemian Canvas Dark Blue Classic Stripe Rolling Stationary Sleeve Pencil Pouch For 12 Colored Pencils With Zipper Pocket Inside (Black Eva)
- Can storage graphics tablet stylus, digital touch pen, ballpoint pen and other small accessories.
- The colored pencil is not included. This should have a CASE STAR black color drawstring bag adhered this item as a proof. PLEASE NOTED.
- Easy to open or close with zipper closure & elastic strap, convenient to use.
- Slim and lightweight, easily slide into your briefcase, backpack, or other bag for convenient carry.
- Measurements and Sizes: External Dimension: 8.00" x 2.50" x 1.50"
Features:
3. Nitecore i2 Intellicharge Charger for 18650 AAA AA Li-Ion/NiMH Battery
- This charger recharges lithium, NiMH and NiCd batteries. The electronics detect the inserted battery
- Adjusts the charging behavior. The LEDs indicate the charging status of each battery in
- After charging the Intelicharger switches i2 automatically. Capable of charging 2 batteries simultaneously
- Each of the four battery slots monitors and charges independently. Automatically identifies Li-ion, Ni-MH and Ni-Cd rechargeable batteries
- 3 Color LED displays charging progress for each battery. Automatically detects battery status and selects the appropriate voltage and charge mode
- Capable of charging 2 batteries simultaneously
- Each of the four battery slots monitors and charges independently
- Automatically identifies Li-ion, Ni-MH and Ni-Cd rechargeable batteries
- 3 Color LED displays charging progress for each battery
- Automatically detects battery status and selects the appropriate voltage and charge mode
Features:
4. Nitecore New i4 2016 Intellicharger Smart Battery Charger for Li-ion IMR Ni-MH NiCd
Twice the charging speed of the i4 charger, up to 1.5A. Compatible with 1.2V, 3.7V, 4.2V, 4.35V batteriesOptimized charging design for IMR batteries, with new IMR battery recovery featureAutomatically detects battery power status and displays charging progress, and automatically stops charging when ...
5. Nitecore D2 Charger with LCD Display Universal Smart Charger For Rechargeable Batteries IMR/Li-ion/LiFePO4/Ni-MH/Ni-Cd
- Capable of charging 2 batteries simultaneously
- Each of the two battery slots monitors and charges independently
- Compatible with and identifies LI-ION (26650, 22650, 18650, 17670, 18490, 17500, 18350, 16340(RCR123), 14500, 10440) and NI-MH
- Integrated LCD panel clearly displays charging parameters and progress
- Automatically stops charging when complete
Features:
6. Oak Wood Cigar Tube for 1 Cigar
Oak Wood Cigar Tube for 1 CigarAuthentic Natural Oak Wood with Gold RingHolds One Full Size CigarL175mm,Dia30~22mm,67g
9. Nitecore D2 smart Charger 2015 version with LCD display For Li-ion, IMR, LiFePO4 26650 22650 18650 17670 18490 17500 18350 16340 RCR123 14500 10440 Ni-MH And Ni-Cd AA AAA AAAA C Rechargeable Batteries with Ac and 12V DC (Car) power cords, 2 x EdisonBright AA to D type battery spacer/converters
- Compatible with and identifies Li-ion (26650, 22650, 18650, 17670, 18490, 17500, 18350, 16340(RCR123), 14500, 10440), Ni-MH and Ni-Cd (AA, AAA, AAAA, C) rechargeable batteries
- Capable of charging 2 batteries simultaneously; Each of the two battery slots monitors and charges independently
- Optimized charging design for IMR batteries
- Integrated LCD panel clearly displays charging parameters and progress; Two conveniently located side buttons allow easy selection of specific battery types and charging parameters
- 12V DC Cable & 2X EdisonBright AA to D battery converter spacers included. These allow use of rechargeable AA batteries in D battery equipment.
Features:
10. Goal Zero Nomad 20 Solar Panel
Built-in junction box with smart-charging chip, allows you to power handheld USB and 12 Volt gear from the sunPatented chaining technology combines Goal Zero Nomad panels for faster charge timesHighly efficient mono-crystalline solar pumps out more power per square inch. Optimal Operating Temp: 0-12...
11. DeoxIT gold Mini-Brush Applicator, 100% Contact Conditioner, 1.6mL - G100L-16BX
- Improves Conductivity
- Maintains Optimum Signal Quality
- Protects Base Metals from Oxidation
- Prevents Dendrite and Fretting Corrosion
- Forms Protective Anti-Tarnishing Layer Reduces Arcing, RFI and Intermittent Connections Reduces Wear and Abrasion
Features:
12. Goliton TP4056 5V 1A Lipo Battery Charging Board Charger Module lithium battery DIY MICRO Port Mike USB 18650 Plate Interface
Charging mode: linear chargeCharge current: 1A (adjustable)Charging accuracy: 1.5%Input interface: MICRO interfaceWhether to reverse: can not be reversed
13. 2016 Version Nitecore New i2 Intellicharge Universal Smart Battery Charger for 18650 AAA AA Li-Ion/NiMH US Plug
14. Case Star 2 Pieces Clear Plastic Waterproof Battery Storage Case Holder Organizer for 18650 Battery / 16340 Battery with Case Star Velvet Bag
- Package included: 2pcs waterproof battery cases
- Can storage 2pcs 18650 or 4 pcs CR123A batteries/16340 batteries.
- The batteries are not included.
- Easy to open or close, convenient to use. Please contact Case Star once any concern on product or accessory issue.
- Light weight and compact size to better organize your batteries, good for travel.
Features:
15. 2016 Version NITECORE i4 Intellicharger Battery Charger
Made of durable ABS fire retardant materialMetal sliders to reduce wear and tear when inserting batteriesCapable of charging 4 batteries simultaneously3 Color LED displays charging progress for each batteryAutomatically stops charging when completeCapable of charging 4 batteries simultaneouslyEach o...
16. Nitecore Sysmax 12V DC Car Cord for IntelliCharge i4 Smart Battery Charger
- Fully Submersible
- Length: 16.75"
- Wattage: 500W
- Up to 125G
- For freshwater or saltwater
Features:
17. Mudder EVA Hard Shell Stylus Pen Pencil Case Holder for Executive Fountain Pen and Stylus Touch Pen
- Interior elastic strap holds your device in place and helps reduce bumps and drops
- Hard shell case protects the contens from dust and damage
- Good for pencils, stylus touch pen and small accessories
- External dimensions: 7.87 × 2.36 × 1.37 inches
- Interior dimensions: 7.5 × 1.7 × 0.9 inches
Features:
18. Ingrown Hair Tweezers | Pointed Tip | Precision Stainless Steel | Extra Sharp and Perfectly Aligned for Ingrown Hair Treatment & Splinter Removal For Men and Women | By Tweezees
PROFESSIONAL GRADE: Ultra precise stainless steel tweezers. These tweezers are manufactured in a facility that makes surgical instruments and are the highest quality tools available.PERFECT FOR INGROWN HAIR AND SPLINTER REMOVAL: These pointy tweezers are perfect for splinter removal, ingrown hair ha...
19. 10ml Scientific Plastic Test Tubes Screw Top Tube Caps Vial Clear Seal Cap Pack Container, Cylindrical Bottom(Pack of 10)
Hotzzz is only seller authorized by the Yosoo brand. We guarantee you have a good shopping experience. Please feel free to contact us at first if there is any problem, and we are always here to support you.Made of polypropylene; 10ml Plastic Vial Tube Test Tube with Screw CapWith 1-10ml calibration,...
20. Univen High Temp Food Grade Clear Silicone Tubing 9mm ID X 13mm OD Per Foot
- Food-Grade Silicone Tubing
- 9mm Inner Diameter and 13mm Outer Diameter
- Typically Used In Coffeemakers and Other Equipment
- Price is Per Foot, Sold as One Length - Example: Order 3 and Receive One 3-ft. Piece
- High Temperature
Features:
Most important things would probably be
1.) Hold it upside down when you clean the main chamber by swabbing with a q-tip dipped in ISO.
2.) Use a high % ISO. 91% or higher is best. 71% isn't terrible, but avoid anything lower. (I saw at Walmart they had 50%, like what the actual fuck, who wants to pay for 50% water?)
3.) Let the thing COMPLETELY DRY after cleaning. Take it apart and let it air dry for like at least 30 minutes.
4.) I highly recommend getting an external Nitecore charger and some extra batteries, but if you do use the cable I wouldn't recommend leaving it unattended. It even says in the manual to not let it charge unattended and plug it into a surge protector. You want to be there to unplug it in case something fucks up.
With the external chargers you won't have to worry about that. Leaving batteries unattended on a Nitecore charger is safe because they are loaded with safety features and come from a very reputable company. Also, you can charge up to 4 batteries at a time and still use a different battery in your Hopper.
2 battery slots; 3 LED lights display: http://www.amazon.com/Nitecore-i2-Intellicharge-Charger-Battery/dp/B0096U26QQ
4 battery slots; 3 LED lights display: http://www.amazon.com/NITECORE-Intellicharge-universal-battery-Charger/dp/B00KBFZDI8
2 battery slots; digital display: http://www.amazon.com/Nitecore-Charger-Universal-Rechargeable-Batteries/dp/B00KW2ZDJO
4 battery slots; digital display: http://www.amazon.com/Nitecore-Integrated-Displays-Rechargeable-Batteries/dp/B00L1XYX4Y
5.) Don't soak the Silicone condom in ISO unless you are OK with it turning a yellow/brown color. Just swab it with a Q-tip dipped in ISO.
6.) If something isn't working right like the straight to blue issue or it isn't heating up quite as much as it used too, then look at the battery contact on your back-end. If there is black gunk on the contact, carefully swab it with a Q-tip dipped in 91% ISO. Also, make sure the threads on the back are clean. Let it dry completely before using.
7.) Never ever ever ever let air be pushed into it. Like don't blow into it.
Also, Idk if you have heard of delta3dstudios and their awesome attachments yet, but their funnel that is designed for the Grasshopper is simply amazing. Makes loading a cinch and fits the GH perfectly and it is only $7(it was $8 when I got it). They also make other accessories for the GH as well as for other vapes.
There's a certain type of cotton you should use if you intend to inhale through it. There's a disease called cotton lung factory workers used to get all the time. Also most cotton uses bleach to dye it and pesticides and fertilizers and stuff you really shouldn't be inhaling.
This is the cotton I use for my RDA wicks. Just seems a bit healthier.
https://www.amazon.com/Japanese-Organic-Unbleached-Cotton-Large/dp/B00P219C5Q
Not sure if you care, but I thought I'd warn you. I'm just assuming since you got a vape that you want to live a long healthy life. Feel free to criticize my thoughts, I just want everyone to be happy and healthy.
Edit: forgot url for cotton.
Most cigar cases (or cigar tube)will fit nicely. And there are a ton of cool ones out there!
Just add a little foam padding to the top and bottom for extra cushion.
This is what I ordered, though there are also stainless steel ones as well. Plus the wood won't scratch the metal Grasshopper.
Wood Cigar Tube
Just be sure to check your dimensions.
Hope this helps!
Get the extra battery (each one can get me through around 1.5 bowls), WPA piece (water pipe attachment that works better than the normal front end - less draw resistance) and an external charger. I recommend the nitecore D2 - the one I bought can be found here:
https://www.amazon.com/gp/aw/d/B00LCHICAU/ref=yo_ii_img?ie=UTF8&psc=1
Enjoy your Hopper! Thing is amazing.
Solar should work fine, but keep in mind that solar chargers are very inconsistent and the rating shown is in optimal conditions, the real world output is far less than that.
That said, the goalzero Nomad 20 should do nicely, my Nomad 7 didn't charge the battery to any useful amount.
http://smile.amazon.com/Goal-Zero-12004-Nomad-Solar/dp/B00GU64KV8/ref=sr_1_1?ie=UTF8&qid=1453586010&sr=8-1&keywords=goal+zero+nomad+20
I've had good results using Deoxit on the backend threads. Cleans everything really well and helps keep the backend cool
https://www.amazon.com/dp/B00XICZILS/ref=cm_sw_r_cp_apa_jmP1xbEG76545
Thanks!
All I was trying to say is this case is a perfect fit for the hopper + 3 extra batteries + a stir tool + 2 tubes of herb + crafty cooling unit with attached firewood 3 mouthpiece: http://www.amazon.com/gp/product/B00VLP8H94?psc=1&redirect=true&ref_=oh_aui_search_detailpage
That's all.
DONT apply 5V on the hoppers body! The battery is direcly connectet to the body and 5V will kill your battery ( and may be the electronics). You can see the polarity in the picture. http://imgur.com/a/y1GDo
you can use a cheap lipo /liion usb charger to charge the battery.
Something like this (amazon ca)
The hopper charger cable has a module like that in the black thing near the USB plug. May be the exact same thing. ( didn't check ). So the hopper cant do anything with 5V (except die and explode).
However. Making something that will attach nicely to the hopper and make good contact will be hard to make. You will need a round magnet some nice solution for the contacts to rebuild the original charger. Or you take big ass alligator clips or solder wires on (pls no).
you could take the charger module and make a really chap lipo/liion charger. But that will be hard to make nicely again. Even if you have a maker space with a 3D printer laser cutter tools ect...
If you have still questions feel free to ask.
Battery will drain fast.
See if you can find a Nitecore charger at Walmart or a similar store or just same day order one from Amazon:
https://www.amazon.com/version-Nitecore-Intellicharge-Universal-Battery/dp/B01HOP6ADE
Good luck!
https://www.amazon.com/Nitecore-i2-Intellicharge-Charger-Battery/dp/B0096U26QQ
It doesn't seem to be sold in physical stores but you can get it from amazon pretty quick.
Ok didn't have tags or anything but data_eater got one just like mine at @: https://www.amazon.com/gp/product/B00VLP8H94
and also a link to his thread: https://www.reddit.com/r/GrassHopperVape/comments/4lcts5/i_heard_it_was_portable_but_wow/
Apparently its made by case star for holding school supplies.
Happy Vaping!
https://www.amazon.com/gp/product/B00QG9KXE2/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B005UAI372/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B00MC94VLG/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
The major jar and extra lids to drill into and old whip were just laying around, so the bubbler is basically recycled.
I'll let you total that up. IMO, way the hell worth it. Between mobile use and waterpipe use, the hopper is visciously versatile. Hope that helps.
This charger would probably be fine, maybe get the 4-bay version if you get more batteries. They charge back up to full pretty quickly though so it's not a big deal.
Couldn't find the exact set I got (wasn't on amazon) but [here] (https://www.amazon.com/Scientific-Plastic-Container-Cylindrical-bottom/dp/B01M8M33G4) is an example, and [here] (http://imgur.com/a/qlm64) is what I have. I bought them about a year ago and can't find the exact site, if I do I'll edit it in, but the ones on amazon should do the same thing.
EDIT: [Sauce] (http://www.lcmlab.com/SearchResults.asp?Cat=23) I bought the 17mm. Don't be me and buy yourself a 12mm. I'm sure mine will be fine I'm just a tad ocd and I hate knowing I bought a greater-than-the-diameter set. Oh well.
edit 2: ordered the 12mm
I stumbled across [this one] (https://www.amazon.com/Mudder-Stylus-Pencil-Executive-Fountain/dp/B01C6U3N6O/ref=sr_1_3?ie=UTF8&qid=1486874755&sr=8-3&keywords=pen+case+hard+shell#customerReviews) which I like for some reason.
If you're going to try this make sure to use food grade silicon tubing like this one: http://www.amazon.com/High-Temp-Grade-Silicone-Tubing/dp/B00FXAA0BQ
Considering it's the last of a long list of things they promised to make, and that it was supposed to launch winter 2018 (i think), I wouldn't put any faith in it coming out soon at all. Just get a nitecore i4 and use that.
https://www.amazon.com/Nitecore-Intellicharger-Battery-Charger-Li-ion/dp/B00KBFZDI8
I ordered something similar to Tubasco ... can fit all the necessities. Not so much of a "hardshell" but does the trick
--> https://www.amazon.com/Mudder-Stylus-Pencil-Executive-Fountain/dp/B01C6U3N6O/ref=cm_cr_arp_d_product_top?ie=UTF8
Since I'm in europe I bought this https://www.amazon.co.uk/dp/B01C6U3N6O/ref=pe_1909131_77695521_tnp_email_TE_Cardp_1
In usa I've seen this one linked in the grasshopper compendium thread https://www.amazon.com/gp/aw/d/B00VLP8H94?fp=1&pc_redir=T1&redirect=true