Best products from r/LGG3
We found 158 comments on r/LGG3 discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 221 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Diztronic Matte Back Black Flexible TPU Case for LG G3 (All Carriers) - Retail Packagin
- Custom-fit LG G3 Case by Diztronic
- Matte Back Prevents Fingerprints - High Gloss TPU Frames the Screen
- "Lay-On-The-Table" Design Helps Protect Glass Screen From Damage When Placed Face Down
- Thin and Lightweight - Weighs Less Than 1 Ounce and Only 1.5mm Thick!
- Compatible with Verizon, Sprint, T-Mobile, AT&T, US Cellular Models (All Carriers)
Features:
2. SupCase sup-lgg3-ub-clear/BL Cover Black, Transparent Mobile Phone Case – Mobile Phone Cases
- 【High quality】 stylish nylon fiber jacket makes it stand out from bunch of cables and provides higher durability and increased flexibility with tangle-free. Amazing cords for usage while charging in home, cars, office and more.
- 【Fast Charger】 Fast charge high-quality four-core copper wires enhance charging & data transfer speed of the cables. Our technology ensures a faster charging time while keeping your device completely safe. Easy to carry, it suits every occasions, home, office, car and so on.
Features:
3. iCarez [Tempered Glass Screen Protector for LG G3 Easy Install [1-Pack,0.3mm 2.5D 9H] - Retail Packaging
- Tempered Glass Anti-scratch for LG G3 (Hardness: 9H),0.3mm,2.5D Rounded Edges
- Dry Application: Easy to install and remove (Bubble-Free / No Residue)
- High Definition Transparency glass that ensures maximum resolution for RETINA Display
- TrueTouch Sensitivity for an invisible and perfect protection on touch screen
- Perfect cutouts on the front not to interfere with sensors or responsiveness
Features:
4. Spigen Ultra Hybrid LG G3 Case with Air Cushion Technology and Hybrid Drop Protection for - Gunmetal
- Clear Hard Back Panel + Flexible Edge = Combination of TPU and Polycarbonate for dual protection
- Absorbs shock for superior protection
- Scratch-Free Design: The lips on both front and back protect the screen and the back panel from scratches
- Extreme Drop Protection - Air Cushion Technology Corners
- LG G3 Case Compatible with LG G3 (2014)
Features:
5. Smingda for LG G3 Case Full-body Rugged Hybrid Protective Case with Built-in Screen Protector for LG G3 Case(Black)
- Precise cutouts for LG G3 (2014 Release); Advanced front cover Snap-On design for EASY installation
- Advanced dual layer designed case combined of Polycarbonate hard shell and flexible TPU withstands accidental drop, bump and shock
- Front cover with built-in screen protector prevents scratches without compromising sensitivity
- All features accessible with case installed; Port covers keep out debris and dust
- Sporty design with multi-color options
Features:
6. Spigen Slim Armor LG G3 Case with Air Cushion Technology and Hybrid Drop Protection for - Gunmetal
- Combination of TPU and Polycarbonate for dual protection from drops and scratches
- Advanced Shock Absorption Technology: Web Pattern TPU case
- Slim, lightweight and form-fitted
- Perfect cutouts for the camera, speakers and other ports
- Compatible with LG G3 (2014)
Features:
7. TUDIA LITE TPU Bumper Protective Case for LG G3 (2014) (Black)
Material : High Quality Thermoplastic Polyurethane TPU rubberized gel silicone skin case for LG G3Extremely durable and provides a soft comfortable grip for LG G3Soft touch feel on a durable flexi shell cover.Raised edges design helps protect the display screen from scratches when placed the device ...
8. Anti Snoring Chin Strap, Snoring Stopper Solution, Anti Snoring Devices, Stop Snoring Sleep Aid Adjustable & Breathable Snore Stopper for Men and Women
- Direct battery discharge design to provide absolute power efficiency. External battery waste 30-40% through USB cable and voltage Conversion
- Compatible with all LG G3 models (Not compatible with the G3 s). largest capacity battery in the world
- Newly design TPU/PC rugged case with double corner technology to reduce shock from natural drop angles. Belt clip and Japan PET screen protector included
- Patented design- patent #: US D700, 39 s - the original innovator of the world's largest tricell extended battery
- 180 days zero lemon with 30 days full refund ; longest period in market; 24 hours / 6 days a week support; 100% zero defect
Features:
9. Valley Enterprises 6 inch TRRS 4-Pole 3.5mm Male Right Angle to 3.5mm Female Audio Cable
3.5mm Male Right Angle to 3.5mm Female Stereo Audio CableTRRS 4 Pole Connectors - Supports Audio, Microphone or VideoMolded Gold Plated Connectors with Strain Relief3mm (Slim Design) Nylon Reinforced Copper CablesTotal Length: 6 inches (+/- .25 inch), total length measured connector tip to connector...
10. LG G3 Case - Ringke SLIM Case [Free HD Film-Better Grip][CRYSTAL] Full Top and Bottom Coverage Premium Dual Coated Hard Case for LG G3 - Eco Package
11. LG G3 Case - Ringke FUSION Case [Free HD Film/Drop Protection][CRYSTAL CLEAR] Shock Absorption Bumper Premium Hard Case for LG G3 - Eco/DIY Package
12. Aduro U-Grip Plus Windshield Car Mount - Universal for iPhone / Galaxy and all Smartphones & Multimedia devices up to 5.5" Screen (Red/Black)
- Universal Car Mount fits most Phones with 3.5 to 5.5 inch screens (Including the latest Galaxy Note 2), Adjustable 360° viewing angles
- The mount offers the ability to mount the phone while using the extended battery or when in its protective case, such as Otterbox Deffender or Ballistic SG Series
- Single-handed operation, No more hassle putting your phone or device on the mount
- Patented Suction Technology sticks to most dashboards and doesn't let go in any weather condition, hot or cold
- U-Grip Plus features New Extended Claws in the same compact design, which makes it the most unique and exclusive mounting solution available on the market
Features:
13. iloome LG G3 ScreenMate Flex Flexible Glass 8H Hardness Premium Screen Protector with Oleophobic Coating
8H Hardness: exceptionally impact & scratch resistantUnrivaled touch sensitivity: no loss of screen resolution or touch sensitivityUltra durable and flexible glass. Features oleophobic coating that offers resistance against smudges and fingerprints caused from daily useExtremely easy installation wi...
14. SupCase sup-lgg3-ub-black/BL Mobile Phone Case – Mobile Phone Cases
- Precise cutouts for LG G3 2014 Release
- All features accessible with case installed
- Made of high-grade soft thermoplastic polyurethane (TPU) and hard polycarbonate (PC) materials
- Snap-on cover for easy installation
- Sporty design; Multiple color options
Features:
15. Fintie LG G3 Smart Circle Case - [Quick Circle Window] Premium PU Leather Slim [Magnetic Closure] Flip Cover for LG G3 (2014) - Black
16. LG G3 Case, Verus [Quick Circle Window] LG G3 Case Flip Cover [Dandy Nuevo][Black] Premium Vintage PU Leather Quick Circle Folio - Verizon, AT&T, Sprint, T-Mobile, International, and Unlocked - Leather View Flip Case LG Optimus G3 D850 VS985 D851 990 2014 Model
Material: Premium Rigid Rubberized Plastic RubberHigh tech armor plating design along with Multi-layer construction for maximum impact resistancePerfectly fit your phone's shape while providing easy access to all phone functions without having to remove the case.100% Brand New and high quality.Preci...
17. Nite Ize Original Steelie Dash Mount Kit - Magnetic Car Dash Mount for Smartphones (Packaging may vary)
MAGNETIC CAR PHONE HOLDER FOR YOUR DASH, HANDS-FREE VIEWING - Dock your phone to your dashboard in a snap, with a sleek and compact design using Steelie magnetic mounting technology. Secure just about any phone to most any car dashUNIVERSAL, SECURE ATTACHMENT TO PHONE, CASE, AND CAR - The Magnetic P...
18. Spigen Glas tR Slim LG G3 Screen Protector with Tempered Glass for LG G3
State of the Art Technology: The original Glass Screen protector made with Japanese Premium GlassThe THINNEST Tempered Glass Screen Protector in the market (0.23mm)More Durable and Chip Resistant with Rounded EdgeEasy Installation: Best Installation results with no air bubblesDelicate Touch: Absolut...
19. LG G3 Extended Battery, MPJ 6000mAh Li-ion High Capacity Extended Battery for LG G3, D851(T-Mobile), D850(ATT), VS985(Verizon), LS990(Sprint)
MPJ battery compatible with LG G3, D851(T-Mobile), D850(AT&T), VS985(Verizon), LS990(Sprint)(Battery Code: BL-53YH)Grade A cells ensure longer battery life (500+ cycles) and high-speed, efficient charging. Built-in IC chip prevents overcharging. Guaranteed to fit your LG G3 cell phoneVoltage: 3.80V....
I never used to use one, but I started trying Tempered Glass protectors. Love that they feel just like the glass and will protect the phone screen from scratches.
I tried 3 different ones on my G3, and This Spigen has been the best. Fits best, only has a cutout for the speaker, and has the same Oleophobic coating as the screen. Pricey, but if you wanna protect your screen and have it feel the same as if it didn't have a protector, I think it's a solid buy.
Spigen Slim Armor Case
I have this on my G3 and it is not bulky at all but does protect it well. Also probably my favorite thing about it is that the case looks just as good, if not better, than the phone itself! It does not restrict any part of the phone (unless you have the Korean version with an antenna) and feels great in the hand. It's also less than $20 so is very affordable. I highly recommend it!
I bought a 6000 mah battery from amazon. And I have to say it's awesome. Twice the juice.
I can go 2 days without charging. Did a little experiment. Started the day at 100%. At the end of the day, I was at around 76%.
http://imgur.com/EujBuoN ( pic at 10:30 ish)
Was home all day, so phone didn't get heavy use, but still I think 76% is impressive, way better than the stock battery.
http://imgur.com/fp5NPoR
Then, I went to rainymood.com and played the rain sound all night long. From 12:30am ish till 8 am. Battery in the morning was at 50%. Not bad again.
I'm pretty impressed with the battery, only thing is it's bulkier and you have to use a thicker cover ( came with battery). Usually, I play music all day long. When I'm at work and commuting. I think it drops to around 50% at the end of the day on heavy use.
Sorry for the formatting, on mobile. Don't know how to format correctly and also the dim screenshots, was using CF lumen.
Also, obviously it takes longer to charge.
Edit: link to battery on amazon http://www.amazon.com/gp/aw/d/B00TBBL896/ref=mp_s_a_1_1?qid=1451241943&sr=8-1&pi=SL75_QL70&keywords=lg+g3+6000mah+battery
Diztronic Matte Back Black Flexible TPU Case for LG G3
Got this kind as just a temporary case (was thinking of getting the Seidio case with the kickstand), but I REALLY like this one. Has the nice matte feel like you'd expect on a Nexus 5 of Nexus 7 - really fits snugly and just feels great. Doesn't add much bulk and I am so much more confident handling it one-handed now. May just stick with this tbh.
These are just from my personal experience (I have not done anything to the phone besides change the launcher/icons):
I hope that helps!
Fits perfectly, good protection, stylish design but slippery due to plastic back and lack of rough grip sides.
Fits perfectly, not good protection, stylish design but slippery due to lack of rough grip sides.
Fits perfectly, not good protection, not so stylish but due to the rough grip sides is not slippery.
I really like Slim Armor but from time to time it would slip out of my hand. That was the main reason for me to look for another case. Cruzerlite's case has cool design but did not provide the grip I wanted.
iTALKonline's Slim Grip is exactly the case I was looking for. It has rough grip sides which provide a better grip.
I've got the Spigen AirCushion
FWIW, I think that as much as anything, the electrode placement on the sticker is the key here. A less good connection will work fine w/ no case, it has to be nearly perfect to work with a case. I do cellphone repair and so I have some weird tools, I actually didn't put the sticker on the way it's recommended.
I removed the back of the phone, placed 3m double sided 2mm tape on the battery, aligned the sticker perfectly, then replaced the cover and tested. When it worked, I removed the backing from the sticker itself and reattached the cover, pushed it down, then pulled it back off. The sticker coating is stronger than the 2mm tape, so it pulled it off, then I smooshed down the sticker for perfect adhesion and put it back on. Alignment is perfect, I couldn't make it work at ALL otherwise.
So I was stupid and forgot that my new $600 phone was $600....and I used it as an aid for my baking a little over a month ago. I used the neat feature of quick memo to draw notes and measurements over a screen shot of another recipe. While baking, and one hand covered with powder, I fidangled with my phone to incline it on an angle to see the recipe but with a loose grip, I dropped (pretty much laterally [not literally or figuratively] shot-putted) it across the kitchen and onto the hard tile floor.
My heart sank 20,000 leagues as I barely just had the phone for a month....
o.o
O.O
>o<
-_-
Time to assess the damage....I picked it up and saw a ginormous crack from one corner and extending across my phone. fuck. fuckitty fuck. <sadface.gif>
I slowly built up the confidence, and tapped on the screen...It turned on! Better yet, everything fully works, and the LCD is intact!!
After recollecting myself, and finishing my /r/Keto Coconut Pancakes by memory and just adding a little of this and that
http://i.imgur.com/lyiLtw6.jpg
...I remembered that the title of the screen protector on the Amazon mentioned a lifetime warranty!
http://www.amazon.com/Anti-Scratch-Bubble-free-Fingerprint-Protector-Replacement/dp/B00KGSW734
I couldn't find any other details in the original packaging or on their website addressing this warantee, so I contacted iCarez through their email, support@icarez.com, but the email didn't hit (got a server not found message). I contacted them through my Amazon account, contact seller and this got me a response. They told me to reply with some images of the damage (See album below). After a day, I received a shipping confirmation from them and received my replacement and within a week, I received a brand new screen protector!
I've been definitely babying my phone a lot more since this incident. But thanks to the awesome support and ease of replacement, I whole-heartedly recommend getting the iCarez glass screen protector! it kicks the llama's ass, although their website is janky as hell.
Lessons learned:
Always write down your recipe. I made the best fluffy and moist flourless pancakes ever that night without a recipe and didn't bother to write it down since I thought that I would remember. I didn't.
tldr; write down your recipe if experimenting in the kitchen.
Also buy the a glass screen protector from iCarez, it has a lifetime warranty and only costs $9. It's worth it.
link again to screen protector:
http://www.amazon.com/Anti-Scratch-Bubble-free-Fingerprint-Protector-Replacement/dp/B00KGSW734
Link to album of damage:
http://imgur.com/a/5oB59
http://www.amazon.com/Verus-Quick-Circle-Window-Dandy/dp/B00KY6CZGC
This is the case I am currently using. Love it! The leather feels great and it's so easy to lock and unlock the screen by just opening or closing the flap. Through the quick circle I can answer calls(and talk through the cover), take pictures, make calls, and get basic weather info. I can tap to unlock and it even shows you the notification icons for a second when you unlock it. The plastic that snaps on fit's extremely well and feels like quality plastic but you don't feel much of it since most of the back is leather as well. It's just a plastic case so protection is near zero but still better than naked. Wasn't sure what to expect with the Quick Circle feature but I wanted to give it a try. I've been pleasantly surprised with both the case and the Quick Circle feature.
I wasn't sure about this, but I decided I like it and works well. Ditch the case (ruins all the work they spent making the large phone feel smaller/easy to use)
Nathan's Gel Waist Belth - fits my phone and keys. Use MapMyRun and Google Play (music downloaded to SD) when running.
Can't tell its there - very comfortable.
Not visible under my shirt (don't be wearing a fanny pack yo)
Good build quality
I got the SUPCASE Unicorn Beetle Series Premium Hybrid Protective Bumper Case and it rocks. I got the black/black one. It fits the G3 like a glove, adds very little bulk or weight. The cutouts are all absolutely perfect. In fact the phone is even easier to use with the case on because the way the cutout in the back is makes it easier to feel where the button and up/down rocker is for volume. Definitely recommend.
http://www.amazon.com/gp/product/B00JW7AQWY/ref=oh_aui_detailpage_o00_s00?ie=UTF8&amp;psc=1
For ease of use I have yet to find anything better than this:
http://www.amazon.com/gp/aw/d/B00BAQKRHY?cache=a37717589af592cddf562178e45f1779&amp;pi=SY200_QL40&amp;qid=1410186980&amp;sr=8-1#ref=mp_s_a_1_1
It does require putting a magnet in the back of your phone, but I've found its super useful in many other situations as well.
I've used diztronic cases on my last few phones and have been happy with all of them. They fit snugly and still hold their shape after being pried off hundreds of times. I can't attest to the longevity of the G3 version, but the fit is great and it's under $10 on amazon.
http://www.amazon.com/Diztronic-Matte-Black-Flexible-Carriers/dp/B00KN7UQ6I
Note that one of the black options is the "ultra" version, which is a bit thicker and has reinforced "bumpers" on the corners. I have the standard version.
It's kinda hard to capture the color in a photo. I think the first photo in my album is probably the closest to the actual color of the case.
I LOVE the Ebony wood against the white G3.
http://imgur.com/a/oGGTB
If you do decide to purchase, I'll fill you in on a few things about it.
-The case is pre-applied with 3M adhesive. (if you want to take off the case, they require heating it up with a hairdryer first)
-The top corners have seem to chip a little on mine recently (I've had it for 2-3 months). I can upload a photo later.
-You can remove your battery without peeling off the case.
I recommend getting a tempered glass screen protector. This is the same one I have on mine. Flawless.
Edit: oh Yea! The case will collect lint in the cracks for a week. Just keep using it. It will stop. My favorite thing is a burst of fresh cut wood every time you pull it out of your pocket.
This is the case. Fits perfect and great protection. Plus it is not made of the soft silicone that makes you turn your pocket inside out when you grab your phone.
https://www.amazon.com/gp/product/B00JW7APWU/ref=oh_aui_detailpage_o03_s00?ie=UTF8&amp;psc=1
Below is the ballistic glass screen cover. The easiest screen cover to put on. Comes with EVERYTHING you need to make sure your screen is clean before application. Still no scratches on mine after months. REMOVE THE BUILT IN PLASTIC SCREEN COVER FROM THE CASE TO USE THE GLASS SCREEN COVER.
https://www.amazon.com/gp/product/B00KC3FMKI/ref=oh_aui_detailpage_o04_s00?ie=UTF8&amp;psc=1
I'm no expert, but if you can hit the center of your screen with a hammer and it doesn't break I think it's doing a pretty good job: Youtube Link
I have the InvisibleShield Glass on my G3 and think it's awesome. It comes with a lifetime guarantee that if you ever break or scratch it they will replace it.
I also put this case around it just to keep from scratching up the edges and back: Amazon Link
The one review at the bottom with some kid dropping the phone from overhead and it never breaks the screen or damages the phone either.
I personally went with the spigen slim armor. It's a bit slippery but I'm confident in it's non-dramatic drop protection. The Unicorn Beetle PRO seems like a really good protective case as well
Do you mind me asking why you want an aluminium bumper case? Unless it's super thick I doubt whether an aluminium case will actually add much protection to a G3. Aluminium bumper cases are probably hard to find for this reason.
Aluminium is a relatively very hard material for bumper cases so it has little ability to absorb shocks before they're passed to the phone itself. Basically what you want to do is to minimize the peak pressure applied to your phone, like the helmit graph shown on this page explaining all this. Because aluminium is so hard (rigid), the force will simply be transferred directly to your phone, rather than dispersed to a larger area of the phone over time.
TPU (a kind of hard rubber / soft plastic) is one of the best materials to use for thin cases because it has an ideal hardness for thin bumper cases, as well as a whole lot of other properties good for phone cases. Silicone is a little softer, so you can go silicone if you're willing to have a thicker and cheaper case.
Personally I recommend the Tudia LITE case for USD$10. Here's a drop test of it in action.
I'm currently sporting the Spigen ULTRA HYBRID Series [Gunmetal]. I've been a fan of Spigen cases from past phones, and am liking it for the LG G3. The only oddity is that it has the antenna cutout. Otherwise, looks good, feels good.
Looks like the Spigen version of the Supcase Unicorn Beetle.
Yes I'm currently checking those out. I'm pretty sure I'm going with this one. It's cheap very slim and doesn't have the cutout that most of them have to be compatible with the Korean models.
It also comes with a screen protector and I have amazon prime!
http://www.amazon.com/gp/product/B00HS5LYQ4/ref=oh_details_o00_s00_i00?ie=UTF8&amp;psc=1&amp;tag=viglink20238-20
Here's a good place to read about cases, and screen protectors, etc...
http://forum.xda-developers.com/lg-g3/accessories
It does, I have THIS ONE. I wanted something tough that would go in and out of pockets rather easily. It fits really snug on the phone and is actually two pieces, it comes with a built in plastic screen protector that is pretty easy to remove if you want a different one or just don't want to use one.
If you have any specific questions about it I'd be happy to answer them.
I have the Diztronic Black TPU case and it's definitely not more rubbery type of TPU. It's flexible but of a harder type. Will probably be too smooth for your needs, and has no added texture/grip on the sides.
On a side note, I recommend checking out some Korean stock for different designs. Case Fanatic and some other sites have lots of case designs that aren't officially sold in US vendors (yet, if ever). Many are available on ebay if you get creative or lucky with keywords :))
Got this on Monday, pretty happy with it, comes with a free screen protector too.
I don't know if I can post the link correctly, but I went with the Diztronic case from Amazon. I'm hoping that it will keep me satisfied until the LG Slim Cases become available so I can use wireless charging!
I have this and I love it. It looks great.
In my opinion I wouldn't get this case. It's a bumper case, yet it doesn't even protect the top and bottom at all. It's basically made to just protect the back of the phone from scratches. If anything I'd recommend the spigen air cushion case.
http://www.amazon.com/Spigen-CUSHION-Gunmetal-Scratch-Resistant/dp/B00K33N3GC
I have this case on right now and it feels really sturdy and could protect it from minor drops. The only down side to this case is that it has a cutout on the top left for the Korean version TV antenna. As long as you can deal with that, this case is awesome, not too thick but semi protective as well.
I'm really liking the Diztronic case. Case doesn't add much bulk and is actually pretty good looking.
Also took some pictures. Apologies if some of them come out a bit dark.
I have an android watch so need Bluetooth on and also have pretty bad battery life. I get around it by carrying a small battery bank when I won't be near a charger for a while. I am also considering a ZeroLemon LG G3 9000mAh Extended Battery case which would save me having to recharge constantly. http://www.amazon.com/Warranty-ZeroLemon-Extended-Protection-Protector/dp/B00NVR93IY
I've heard others use buying extra batteries and swapping them in which is pretty easy on this phone.
Ill start with this case, It is a Tudia Lite on my vs985. So far it is a great case. It fits nice and snug and doesnt feel like the phone slides around in it.
only problem i have with it is that when i hold the phone in one hand and let it rest on my pinky the charger port cuttout edge feels kinda awkward when resting on my pinky. other than that its great .
front
back
thickness
Don't let the price/appearance fool you.
Copycat models cost half as much but their suction ability is terrible and will fail on you.
This is simple and works with Samsung Note sized phones as well.
The suction power on this device is awesome. I just make sure to wipe dust off the dash with the back of my hand (no oils) before applying.
Do you use the rugged case or the one with the clear back?
...because I love the rugged UB case. Adds little bulk but about the same protection as an Otterbox defender. $19 brand new right now.
Link for those interested: Unicorn Beetle Pro for LG G3 (Rugged)
Currently have this one from Amazon
[https://www.amazon.com/dp/B00KGSW734/ref=cm_sw_r_other_awd_-VV-wbV5EE3FW]
Super easy to install and lifetime warranty
SUPCase Unicorn Beetle. $10-13 on Amazon. Snug fit, not much bulk, decent basic protection.
I use the Clear/Black on my black VZW model, and Clear/Grey on the GF's white VZW and they look great.
http://www.amazon.com/SUPCASE-Unicorn-Premium-Protective-Black/dp/B00JW7ATU8/ref=sr_1_6?ie=UTF8&amp;qid=1420411359&amp;sr=8-6&amp;keywords=g3+case+supcase
The quick circle case I use looks strides better and feels great. I bought a black leather Verus circle case for $20 and have been using it for 3 months so far, I love it!
http://www.amazon.com/Verus-Quick-Circle-Window-Dandy/dp/B00KY6CZGC
I love my matte Diztronic TPU case. Slim enough to preserve the great curve of the back of the phone, but tough enough to keep dings away and textured enough to give a good grip.
http://www.amazon.com/gp/aw/d/B00KN7UQ6I/ref=mp_s_a_1_1?qid=1419472820&amp;sr=8-1&amp;pi=AC_SY200_QL40
I use this Ringke case and I love it. Came with a screen protector too! Haven't found the need to put it on yet though, screen stays clean and seems very durable.
I got the same case except I did not like the screen protector much so I removed the plastic and I am using one of these to protect my screen: http://www.amazon.com/Anti-Scratch-Bubble-free-Fingerprint-Protector-Replacement/dp/B00KGSW734
Love the UB case. I thought about getting the OtterBox but honestly it was too expensive for my budget.
This is all hypothetical as I'm not positive it would work, but as its a skin its pretty much flat and something like could maybe fit over it
I remove the phone's back cover to expose the hot area, especially the area around the rear buttons and camera, and use tape to keep the battery from falling out.
Hold the phone with a phone mount that doesn't cover a lot of the phone's surface area (I use a $5 clone of the Aduro U-Grip, or maybe something like this?, and I bet there are better options). Secure the holder so it doesn't topple over since most car phone holders tend to be front heavy when used as a desk stand and their sticky suction cup mount suck.
Aim something like a small USB fan (or air conditioner flow) at the back of the phone. It is barely warm when running Pokemon GO in 85+F ambient environment.
I like the Spigen slit fit case. Doesn't add much bulk and offers good protection.
I have this case and it is great. Very slim, unobstrusive, and provides more than adequate protection. Have dropped my phone multiple times and has not broken.
http://imgur.com/a/jO7a8
(Sorry about potato quality, only had Moto G on hand)
Got this from Amazon the same day I got my phone, love the case. Its 2 Pieces, the phone kinda locks into the front cover, and the and the back shell goes around that. It's a rubber exterior but not the very resistant rubber like the Defender series from Otterbox so it easily goes in and out of your pocket.
http://www.amazon.com/gp/product/B00JW7APWU/ref=oh_details_o01_s00_i00?ie=UTF8&amp;psc=1
The Spigen cases are pretty popular. I don't have one myself (I'm a phone nudist) but I've heard good things about them.
I'd go with the Supcase Unicorn Beetle.
http://www.amazon.com/gp/aw/d/B00JW7ATU8/ref=mp_s_a_1_3?qid=1420075938&amp;sr=8-3&amp;pi=AC_SY200_QL40
It fits the G3 very tightly, and protects it most where it's most important (the edges). It's a very good quality case despite costing only $10. The inside of the case is flush with the back of the phone, and the cutout for the buttons and camera are very accurate and smooth.
Are you looking for a sturdy case with a cover or just a sturdy case? This one looks pretty sturdy. The Otterbox defender is also a pretty heavy duty case
I use iCarez tempered glass screen protector. Ive only had it on for a few days, but i love it so far. It doesn't seem to collect too many fingerprints.
http://www.amazon.com/Anti-Scratch-Bubble-free-Fingerprint-Protector-Replacement/dp/B00KGSW734
I use http://www.amazon.com/Spigen%C2%AE-CUSHION-Gunmetal-Scratch-Resistant/dp/B00K33N3GC/ref=sr_1_1?s=wireless&amp;ie=UTF8&amp;qid=1414761467&amp;sr=1-1&amp;keywords=spigen+g3 in conjunction with http://www.xtremeguard.com/LG-G3-Screen-Protectors-p/lg-g3-screen-protector.htm#.VFOMOfnF_hA (sign up for emails, they have alot of 90% off sales) They fit perfectly together.
The Ringke Fusion case:
http://www.amazon.com/LG-G3-Case-Protection-Absorption/dp/B00K7B66AA/ref=sr_1_2?ie=UTF8&amp;qid=1409211837&amp;sr=8-2&amp;keywords=lg+g3+ringke+fusion
I have this on my Verizon G3 :). It has TPU sides, bottom and top, and the center back portion is plastic. Already proved its worth; i forgot that my phone was on top of my iPad on my nightstand..and this was in the dark. My phone fell down, hitting the glass portion of the base nightstand and bounced off onto the carpet...god knows what would have happened if i had no case on it. TPU is a great material!
Thanks! Would you say that it beats the LG G3 Spigen ? I've read good things about it too, though it doesnt have Qi.
EDIT: Does anyone have a link to where I could buy the Model# CC-320G cover?
I like the tempered glass and nite ize, a great way to mount your phone in the car. Cant say enough about it. Watch the price, Ive seen it for less.
This is the case I use. Most people don't realize I have a case on my phone at all and they think it's just part of the design. It's super light and adds very little mass. It also raises on the sides so the screen doesn't impact the ground on falls unless it hits an uneven surface like a rock or something.
LG G3 Case, SUPCASE Unicorn Beetle Series Premium Hybrid Protective Bumper Case for LG G3, Frost Clear/Black https://www.amazon.com/dp/B00JW7ATU8/ref=cm_sw_r_other_awd_9reDwbH93644T
Supcase feels good in the hand. not too slippery thanks to the rubber edges, not too bulky, and still feels solid enough to do its job and for $10 you'd be hard pressed to find a better deal. Plus it looks cool as shit.
I can recommend this case.
http://www.amazon.com/Unicorn-Beetle-Full-body-Protective-Protector/dp/B00JW7APWU
Feels solid in the hand and very rugged. doesn't add too much bulk
Yes, I always choose a case and then I look at the same case's review from other phones. Ringke and Spigen I the most reviewed ones and always get really good reviews.
For exp http://www.amazon.com/Film-Drop-Protection-Protector-Absorption-Technology/dp/B00GUNN4UE/ref=sr_1_3?ie=UTF8&amp;qid=1404233192&amp;sr=8-3&amp;keywords=ringke+fusion for the iPhone5 and this is the G3 version http://www.amazon.com/Protection-CRYSTAL-Absorption-Yourself-Technology/dp/B00K7B66AA/ref=sr_1_1?ie=UTF8&amp;qid=1404233244&amp;sr=8-1&amp;keywords=ringke+fusion+lg+g3
I bought this because it was cheap and I wasn't sure how I'd like a folio style case, works great for me: http://www.amazon.com/gp/product/B00KL65WPG/ref=oh_aui_detailpage_o03_s00?ie=UTF8&amp;psc=1
This is what you need. It's pretty good against fingerprints.
The Spigen air cushion is a near perfect case. Its very slim with good drop protection and a clear back. The only issue is that there is an extra opening for the International version of the phone in the upper right corner. It might bother some people.
http://www.amazon.com/Spigen%C2%AE-CUSHION-Gunmetal-Scratch-Resistant/dp/B00K33N3GC/ref=sr_1_1?s=wireless&amp;ie=UTF8&amp;qid=1415284764&amp;sr=1-1&amp;keywords=g3+case
I also bought the Cailifu tempered glass protector.
It definitely adds bulk. http://www.amazon.com/Warranty-ZeroLemon-Extended-Protection-Protector/dp/B00NVR93IY
One person's review: "...9000mAh 3 times stock, wonderful life, 2 solid days use for me (sleep time in the 2 days with no charge)..."
I use the Aduro U-GRIP PLUS and it works like a champ with the G3.
https://www.amazon.ca/TUDIA-Ultra-Bumper-Protective-Black/dp/B00K1KTTYW
Good protection, looks super sleek, and has no unnecessary cutouts for the antenna that the korean version of the G3 has.
I got this one, absolutely love it
I think it's like the fintie quick circle case. https://www.google.com/url?q=http://www.amazon.com/Fintie-LG-Smart-Circle-Case/dp/B00KL65WPG&amp;sa=U&amp;ei=6GHNVN7xJoXaoAT23IDIDg&amp;ved=0CBEQFjAA&amp;sig2=QVMYM2_cKS6Cp6blWVh8yA&amp;usg=AFQjCNFoN2W6uBEk3nu4BX8t4uWzVXV3ug it's been 54% off since the G3 was released.
A much better case than lg's BTW. Has a magnetic cover.
This is the best one you can get for this phone, I believe. It's tempered glass and pricey, but totally worth it. Got mine a few days ago, just waiting on tmo release now.
http://www.amazon.com/Protector-Thinnest-Lightweight-Chip-Resistant-Tempered/dp/B00JQI2V18/
Just got this one today....
http://www.amazon.com/gp/aw/d/B00JW7APWU?pc_redir=1406267226&amp;robot_redir=1
Like it so far, it's like my otter box (on my old HTC one) without the gel and a little slimmer/lighter.
I use the SUPCASE Unicorn Beetle Series Premium Hybrid and love it.
I have this and I love it.
of course it makes the phone thicker, the battery has twice the capacity. It's also twice as heavy. There is no free lunch here.
Mine is similar to this one: http://amzn.com/B00TBBL896
In fact all these 6000mAh batteries have the same back cover far as I can tell
Edit: downvoted for stating simple facts? I would have thought you guys to be better than that
I use this case http://www.amazon.com/Unicorn-Beetle-Full-body-Protective-Protector/dp/B00JW7APWU
and really like it. It has a screen cover case that is attached to the case with an adhesive and is easily removable if you don't like it.
http://www.amazon.com/iloome-ScreenMate-Flexible-Protector-Oleophobic/dp/B00LFTLYYQ/ref=sr_1_1?ie=UTF8&amp;qid=1406750645&amp;sr=8-1&amp;keywords=lg+g3+screen+glass+protector+iloome
This one - the iloome 8H flexible glass protector.
I went into detail about it here - http://www.reddit.com/r/LGG3/comments/2b8o0g/tempered_glass_screen_protector/cj2w2en
>iLoome makes a hybrid glass protector with a hardness of 8H (instead of the usual 9H for glass protectors). The awesome thing about this hybrid is that the glass is much more pliable and not as brittle as normal glass protectors. As a result, it's kind of like the new sapphire-hybrid display that the iPhone 6 is going to use. Pliable, bendable, not brittle, yet still high up on the hardness scale. In addition, it's also thinner than the thinnest traditional glass protector, coming in at around 0.12mm (instead of the 0.23 or greater that glass ones use)
>http://www.amazon.com/iloome-ScreenMate-Flexible-Protector-Oleophobic/dp/B00LFTLYYQ/ref=sr_1_1?s=wireless&amp;ie=UTF8&amp;qid=1405896341&amp;sr=1-1&amp;keywords=iloome+8h+lg+g3
>link here, just pulled it off of a google search
>Note: I'm not a shill, however positive this review may sound. I just had a bad experience with a normal 9H glass protector and I did some research
You can temporarily resolve the issue by purchasing this connector. It is an extension with a right angle that has alleviated the issue for me.
LG has neither addressed this issue nor the issue with horizontal screen stretching. It's a shame, really, given how amazing everything else is on the phone. Of course, it's still fairly new and it seems that every device is prone to some issues in the very beginning. Consumers have become unwitting beta testers for companies that don't exactly have the most complete quality control standards.
If you don't care about looks or size the ZeroLemon LG G3 9000mAh is the best
Ordered the SUPCASE Uniform Beetle. I wanted to get a spigen case, but the spigen cases have that antenna cutout for the korean models. Hopefully they'll have an updated U.S. Version
I started with this case but after less than a year the back got very scratched up and discolored. Switched to the Diztronic case and I am liking it a lot so far. Good protection for my needs and less bulky than the Spigen.
Lots of posts about this. The simplest solution is to use an extension to your earplug/headset cord. I use this: www.amazon.com/gp/product/B00C4FU52C, and it works 100% of the time. So will any other TRRS cable: Note the 4 metal areas on the plug, separated by 3 plastic rings. That's all it takes! I also picked the dustball out of the jack using a straight pin.
Went with this, clear/black:
http://www.amazon.com/SUPCASE-Unicorn-Premium-Protective-Black/dp/B00JW7AQWY/ref=sr_1_7?s=wireless&amp;ie=UTF8&amp;qid=1415117339&amp;sr=1-7&amp;keywords=lg+g3+case
Can't be a case with good reviews for $9.99!
Yup. That's the one I have. Great case. Inexpensive. Provides good protection without being too bulky. The only con is taking the phone out of the case is kind of a pain.
I got a Sedio Surface holster for a Note 3 and my phone fits with the case on it just fine. Here's the link:
http://www.amazon.com/SUPCASE-Unicorn-Premium-Protective-Black/dp/B00JW7ATU8/ref=sr_1_3?ie=UTF8&amp;qid=1411767838&amp;sr=8-3&amp;keywords=supcase+g3
Of all the cases I've owned, this one is by far my favorite.
60$ on amazon
http://www.amazon.com/Warranty-ZeroLemon-Extended-Protection-Protector/dp/B00NVR93IY/ref=sr_1_1?ie=UTF8&amp;qid=1416533460&amp;sr=8-1&amp;keywords=lg+g3+zerolemon
Edit: You should make sure to check it out on youtube, it is a bulky case.
http://www.amazon.com/gp/aw/d/B00KGSW734/ref=redir_mdp_mobile?ref_=cm_sw_r_udp_awd_wpsZtb0811ZV using this one at the moment. Feels like a real screen and didn't have any trouble with bubbles
Spigen Slim Armor
Similar to yours. Provides grip, looks good, slim.
Have the iCarez one, though it's not the "thinnest" one but the standard 0.33mm one. No scratches or issues with the edges, though I have a thin case that would protect the edges. Only criticism I have about it is that in direct sunlight, at certain angles, the glass has swirl patterns in it (since day one), which is a little harder to see through than normal. 98% of the time it's crystal clear though.
http://smile.amazon.com/Anti-Scratch-Bubble-free-Fingerprint-Protector-Replacement/dp/B00KGSW734/
Cheap, nice looking minimal case http://www.amazon.com/gp/product/B00KN7UQ6I/ref=oh_aui_detailpage_o03_s00?ie=UTF8&amp;psc=1
I got mine from Amazon. I just checked and it looks like I got it just in time because it's currently unavailable :/
If you want to watch the item, here's the Amazon link.
http://www.amazon.com/gp/aw/d/B00NVR93IY?pc_redir=1412691683&amp;robot_redir=1
Woah! I totally didn't read it that way! That's kind of weird....
That's a real hefty jack, though, and I don't think that you'll find anything that doesn't need some x-acto or dremel work. I have a [Spigen SlimArmour Case] (http://www.amazon.com/Case-Spigen-Slim-Armor-Packaging/dp/B00JQI2J2E/ref=sr_1_2?ie=UTF8&amp;qid=1425950770&amp;sr=8-2&amp;keywords=case+g3), and it barely fits the jack for my Momentums, which is decidedly smaller than that of the M50.
I would recommend an alternate cable, or some x-acto work.
Sorry to not be too helpful...
Ordered one just now. I have tmobile. I'll report back once I get mine in a week or so.Here is the link to the cheap Qi charger.
Edit: I went with this because I didn't want to lose the ability to use this case. http://www.amazon.com/gp/product/B00KN7UQ6I/ref=oh_aui_detailpage_o00_s00?ie=UTF8&amp;psc=1
I'm using this Diztronic case because every case I've ever had from them has been exactly what I wanted: extremely slim, protects the screen with a lip, and cheap. The reviews on the case speak for themselves.
I like the two different style cases from supcase.
http://www.amazon.com/dp/B00JW7ATU8/ref=cm_sw_r_udp_awd_nXGPub0AHYH94
http://www.amazon.com/dp/B00JW7AYYE/ref=cm_sw_r_udp_awd_QWGPub0QFA061
Yup, looks like the rear speaker is kind of covered up. But not fully
http://www.amazon.com/gp/aw/d/B00JQI2J2E/ref=mp_s_a_1_sc_1?qid=1426006350&amp;sr=8-1-spell&amp;pi=AC_SX110_SY165_QL70&amp;keywords=speigen+g3+case
This is a very good case. It doesn't add too much to the footprint of the phone and has saved me from drops. I have dropped my phone from about 4 to 5 feet with no problems
I'm a spray painter by trade and I need something durable and dust resistant so I bought this case . It has a built-in screen protector but it is a bit flimsy for my liking so I also bought a tempered glass screen protector
Edit* I have to add that I cut out the screen protector from the case because it caused issues with the touch screen.
I experienced this issue with earphones only. It doesn't happen anytime. I am going to do a factory reset and I also ordered this as recommended elsewhere in this sub.
This one works fine for me.
I use the zerolemon 8500mAh battery pack. It's huge, but I can go a few days between charging.
https://smile.amazon.com/Extended-ZeroLemon-ZeroShock-Versions-Guarantee/dp/B00NVR93IY?sa-no-redirect=1
I got one last friday and i put it in my phone around 3 that day, it came with about 80% battery ad I left it in my phone all weekend without charging with mild-heavy use, games, youtube, reddit, downloading new apps and trying them out, most of the time and it died around 3AM Sunday night/Monday morning. I'd have to say its a great deal if you can get it for the $60
Amazon Link
As itradedoge said though, it is really large and people I work with have noticed it and have started calling it "The Brick"
Sorry for the delay
The Back
The Front
The Front Speaker Opening Only place you can tell there is a screen protector
The Bottom
The Top IR blaster works well but you have to be pointing right at it.
The Side Sorry about the rotation
The top partially removed The bottom piece wraps around the top and "clicks" into place. kinda tongue and groove
The bottom popped out the covers fit snug over those
Empty back
Empty Front 1
Empty Front 2 you can see the adhesive used for their screen protector which i removed because its reflection sucked and my finger didnt glide well enough
The Screen protector i currently use
Sexy in the dark
I think it's out of stock right now on Amazon but you can probably Google around and find it on Ebay. https://www.amazon.com/dp/B00NVR93IY/ref=cm_sw_r_awd_FaYmub02GBG3W
In regards to cases: I got this one and ripped out the plastic screen protector in favor of a glass one I got the second I bought the phone. It's been nothing but good to me and is WAY cheaper than most others. Wireless charging still works through it, too.
http://www.amazon.com/Supcase-Screen-Protector-Unicorn-Beetle/dp/B00JW7APWU
Non-mobile: http://www.amazon.com/dp/B00JQI2J2E/ref=mp_s_a_1_sc_1?qid=1426006350&sr=8-1-spell&pi=AC_SX110_SY165_QL70&keywords=speigen+g3+case
^That's ^why ^I'm ^here, ^I ^don't ^judge ^you. ^PM ^/u/xl0 ^if ^I'm ^causing ^any ^trouble. ^WUT?
Spigen Slim Armor Case for LG G3
I'm getting that exact combination in tomorrow. I already ordered it, just waiting on UPS to bring it to me sometime tomorrow. I can let you know how it works out.
Here's what I ordered:
Spigen Slim Armor gun-metal case http://www.amazon.com/gp/product/B00JQI2J2E
Tech Armor "Ballistic" Tempered Glass http://www.amazon.com/gp/product/B00KC3FMKI
I do have a case for it...
http://www.amazon.com/gp/aw/d/B00JQI2J2E/ref=mp_s_a_1_1?qid=1418424953&amp;sr=8-1&amp;pi=AC_SY200_QL40
SUPCASE Unicorn Beetle Pro with an iCarez tempered glass screen protector
LG G3 Case, SUPCASE [Heavy Duty] LG G3 Case [Unicorn Beetle PRO Ser... http://www.amazon.com/dp/B00JW7APWU/ref=cm_sw_r_udp_awd_SxKQub0RXVDJ4
I got this case for now:
http://www.amazon.com/dp/B00JW7ATU8/ref=pe_385040_30332200_TE_item
Till they figure out the quick circle case. Which one did you get? My wild side won't let me put a screen protector on it.
Supcase unicorn beetle.
http://www.amazon.com/gp/aw/d/B00JW7ATU8?cache=da28c3d45f02f5fa1089658cde5bdf34&amp;pi=SY200_QL40&amp;qid=1408182868&amp;sr=8-1#ref=mp_s_a_1_1
I chose something quite similar.
this case and this screen protector for me!
[It was $9 here] (http://www.amazon.com/dp/B00KGSW734/ref=pe_385040_121528360_TE_dp_2) You might be able to find it cheaper if you shop around.
My personal favorite
http://www.amazon.com/Diztronic-Matte-Black-Flexible-Carriers/dp/B00KN7UQ6I/ref=sr_1_1?ie=UTF8&amp;qid=1420659521&amp;sr=8-1&amp;keywords=lg+g3+diztronic#customerReviews
I have one of these on my GS3 and plan on getting one for my G3. It's cheap, and not bulky at all.
I use the Diztronic TPU case.
http://www.amazon.com/Diztronic-Matte-Black-Flexible-Carriers/dp/B00KN7UQ6I
http://www.amazon.com/Warranty-ZeroLemon-Extended-Protection-Protector/dp/B00NVR93IY/ref=sr_1_1?ie=UTF8&amp;qid=1420144267&amp;sr=8-1&amp;keywords=lg+g3+zerolemon
ZeroLemon LG G3 8500mah with case https://www.amazon.com/dp/B00NVR93IY/ref=cm_sw_r_other_awd_sW36wbHBCD8ND
https://www.amazon.com/Extended-ZeroLemon-ZeroShock-Versions-Guarantee/dp/B00NVR93IY
[180 Days Warranty] ZeroLemon LG G3 9000mAh Extended Battery + Rugg... http://www.amazon.com/dp/B00NVR93IY/ref=cm_sw_r_udp_awd_hrH.ub0G2XSCG
[180 Days Warranty] ZeroLemon LG G3 9000mAh Extended Battery + Rugg... http://www.amazon.com/dp/B00NVR93IY/ref=cm_sw_r_udp_awd_LD3avb10JHW1G
[180 Days Warranty] ZeroLemon LG G3 9000mAh Extended Battery + Rugg... http://www.amazon.com/dp/B00NVR93IY/ref=cm_sw_r_udp_awd_3taxub0CED6JE
On my last 3-4 phones, I had an Otterbox. But I got tired of the price and added bulk. So when I bought my G3, I got a Spigen Slim Armor off Amazon and I like it a lot.
I purchased this white Spigen case. It's the only white case I've seen that doesn't look like it was designed by a 12-year-old.
I got mine off Amazon. It really does make the phone a brick. If you wear tight pants or have tiny hands I can't recommend it.
Supcase Unicorn Beetle Pro
So far nothing below a 4 star haha
I bought the supcase unicorn beetle hydrid series and it's pretty slim, and not slippery. My only complaint is that the cutout for the USB is a little sharp and depending on how you hold your phone, may annoy. Nothing a file can't fix.
http://www.amazon.com/gp/aw/d/B00JW7ATU8?pc_redir=1408711340&amp;robot_redir=1
I have this case and it works fairly well. It's a little bulky, but that's kind of expected for this kind of case. Also I find Tasker to be invaluable for all of the automation it does. Also, ~2 amp chargers are needed for the phone (needed may be an overstatement, but it makes charging faster)
I had a Spigen case on mine and dropped it, shattered the screen. I think it hit a rock. now I have the "Unicorn Beetle" from SupCase which I think protects better, it's got a full rubber surround, like a Defender, but it's thinner and the rubber is less prone to stretch and get ruined.
damn mobile links: http://www.amazon.com/dp/B00NVR93IY/
No problem. Do you think that with a wood back we won't be able to fit a normal case (this or this anymore?