Best products from r/Louqe

We found 24 comments on r/Louqe discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 25 products and ranked them based on the amount of positive reactions they received. Here are the top 20.

3. Platinum Silicone Hemisphere Bumper, Non–Skid Isolation Feet with Adhesive (8, 1" Hemisphere)

    Features:
  • Optimize Your Stereo Equipment's Sound Quality: Reduce vibration and resonance by up to 95.32% with the help of these turntable isolation platform rubber feet. Play your favorite tracks and LPs without the muddy-sounding bass–rather a cleaner, more defined, and highly nuanced audio quality.
  • Vibration Speaker Adhesive Rubber Feet for Precision and Clarity: Improve bass performance and maximize your sound device's potential with this subwoofer pad. Equip your turntable players, speakers, and CD/DVD players with these turntable isolation pads for exceptional weight and vibration distribution that prevent audio distortion.
  • Designed for Audiophiles & Casual Listeners: The Hudson HiFi Platinum Silicone Feet's sturdy Durometer 20 (Shore A) are perfect for 50-100 lbs components. Unlike solid stick on rubber feet, these won't scratch or ruin your device or surfaces. Each is 2.5" wide and 1.25" tall, and can withstand temperatures of -40°C ~ +240°C
  • Durable and Easy to Install: Using a 3M peel adhesive ensures effortless installation. Unlike speaker spikes, rubber feet adhesive, and rubber feet for electronics, these silicone feet maintain their shape and form over time. Plus, this rock solid vibration platform silicone bumper keeps your device in place and leaves no residue once applied.
  • Small Accessory that Makes a Big Difference: Allow our record player isolation to improve audio quality without unraveling your devices' internal components. Non-invasive, easy-to-attach, and versatile application for small to mid-range components.
Platinum Silicone Hemisphere Bumper, Non–Skid Isolation Feet with Adhesive (8, 1" Hemisphere)
▼ Read Reddit mentions

11. PC Digital-RGB LED Strip, 2pcs DreamColor Magnetic Addressable LED Strip Light for 5V 3pin ARGB LED headers, Compatible with ASUS Aura SYNC, Gigabyte RGB Fusion, MSI Mystic Light Sync, with More LEDs

    Features:
  • ☀Addressable RGB SYNC CONTROL: Airgoo Addressable RGB LED strips are designed for Motherboard with 3-pin Digital RGB led strip header (+5V,DATA,N/A,GND or VDD,DATA,GND), Compatible with Asus Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light Sync, ASROCK Polychrome Sync and SignalRGB software.
  • ☀Notice!!!: Before you place the order, please read your motherboard user manual carefully, make sure there is 3-PIN ARGB header on your Motherboard, if you are not sure, please free to contact with airgoo customer service team, we can help you check it, avoid buying a wrong product that is not suitable for you.
  • ☀GREAT EFFECTS: There are 2 super bright led strips for modding your pc case which creat amazing RGB sync effects and more brighter, these lights strips perfect for you DIY gamers to build up any color or animation you desired.
  • ☀EASY INSTALLATION: The light strip comes both with magnet which between every 3 5050 LEDs and also double sides 3M adhesive on its back, better for you fix it on iron or any dry and flat surface without any screws and clips.
  • ☀PACKAGE INCLUDES:1x ADD RGB extension cable A(for ASUS, MSI, ASROCK ect), 1x ADD RGB extension cable B(for Gigabyte), 1x extension cable, 2x Digital-RGB LED Strip(13.8in per strip). If you want to connect more argb lights to your motherboard argb header, recommend add one airgoo sata powered argb fan hub (ASIN: B0B767HNCZ), that can support connect more argb lights, and extended your motherboard argb headers.
  • ☀QUALITY WARRANTY: One-Year Warranty. Any questions for our Airgoo Product both before and after you place the order, contact us anytime, we will reply you within 24 hours.
PC Digital-RGB LED Strip, 2pcs DreamColor Magnetic Addressable LED Strip Light for 5V 3pin ARGB LED headers, Compatible with ASUS Aura SYNC, Gigabyte RGB Fusion, MSI Mystic Light Sync, with More LEDs
▼ Read Reddit mentions

Top comments mentioning products on r/Louqe:

u/17jwong · 1 pointr/Louqe

The bubbles form naturally during the bonding process; it states this on the back of the container. Here is a link to the Amazon page where I purchased the acrylic cement.

> The product you bought might call it weld, but it really, its not.

This is the same product and technique people use to build acrylic aquariums. If it's good enough for them, it's good enough for me.

> Why do you think all mods/pro today use rubber gasket.

Here's an acrylic reservoir made by Swiftech that is joined with cement and not gaskets.

Edit: just responding to your ninja-edit, I use Weld-On 3 because I feel the faster bonding time makes the pieces easier to work with, plus it's one of the most commonly recommended acrylic adhesives along with Weld-On 4.

u/J7mbo · 1 pointr/Louqe

Yep I rotated 180. For the clips, I just removed them completely. The fan just sits there, it doesn't move or anything so it's nothing to worry about.

I'm using Corsair Vengeance LPX DDR4 RAM, I got 1x 16GB stick and will upgrade to 32GB some time later.

To be clear: it is a VERY tight fit, but totally worth it once you've gotten it shoved in properly.

u/Ethan_NLHW · 5 pointsr/Louqe

I replaced the ones on mine with these. They stick great and actually add some clearance for slightly better airflow.

https://www.amazon.com/dp/B075KM5Y8W/ref=cm_sw_r_sms_apa_i_g4NTDbC2RKG6D

u/imaBEES · 2 pointsr/Louqe

I bought these to replace the big feet on my Steck before I switched it out for a Ghost. Side by side with the ghost they’re a little taller than the ghost’s original feet, but that would only help airflow. I think they look good and I’m probably going to put them on my Ghost as well.

u/shmoley999 · 1 pointr/Louqe

I got them from this but something like these should work well

u/drkmrk · 2 pointsr/Louqe

Any 1" Silicone with Adhesive Hemisphere feet will be a great replacement.

https://www.amazon.com/dp/B075KKRJXH/ref=cm_sw_r_other_apa_i_nyxYDb50RAJZA

u/Zer014PH · 1 pointr/Louqe

I only need 1 m.2 slot, will use one full 2.5 ssd for secondary drive. i know cutting 4mm on the phantom works to fit the L12S but i dont feel like butchering the board lol, found this heatsinks for the vrm, chipset and m.2, will buy thermal tape to stick those. will this be enough to replace the phantom's stock heatsink if i dont plan to OC the system?

VRM/ chilset heatsink
https://www.amazon.com/Heatsink-Cooling-Stepper-Regulators-Raspberry/dp/B07V9XDJNF

M.2 heatsink https://www.amazon.com/Pack-Heatsinks-Cooler-Silicone-Thermal/dp/B07DNC4YP8

u/Whoa_There_Hoss · 6 pointsr/Louqe

Edit: Adding PCPartPicker link and a few more details...

PCPartPicker: https://pcpartpicker.com/b/4tZRsY

More pictures: https://imgur.com/a/UNqsFuO

Specs of "Lil Chungus" below:

  • Case: Louqe Ghost S1 (Limestone) + Large Tophat
  • Mobo: Gigabyte X570 I Aorus Pro WiFi Mini-ITX
  • CPU: AMD Ryzen 7 3800X (w/ Thermal Grizzly Kryonaut)
  • GPU: NVIDIA GeForce RTX 2080 Super FE
  • RAM: Corsair Vengeance RGB Pro 32GB (2x16GB) DDR4 3200
  • PSU: Corsair SF750 PSU
  • Cooling: Corsair H100i RGB Platinum AIO Liquid CPU Cooler
  • Boot Drive: Sabrent 1TB Rocket NVMe 4.0
  • Extra Drive: Samsung 860 QVO 4TB SSD
  • Lighting: Cheap RGB strips to light up the GPU
  • Keyboard: Steelseries Apex 7 TKL w/ HyperX B&W Pudding Caps
  • Mouse: Corsair M65 Pro RGB FPS
  • Monitor: Acer Predator Z35P
  • Desk: These legs attached to the top of this desk. I don't recommend the legs as they don't go low enough.
  • Chair: Secret Labs - Titan
  • Tablet: HP Stream 7 (pls do not buy this ancient turd)

    Camera used here: Sony a6000 w/ Sony SEL50F18 50mm/1.8 for most shots. Switched to a Rokinon 12mm F2.0 for the wide shots. The post's main picture was at f/11, 1.3sec, ISO-100 on that 50mm lens.
u/agonzal7 · 2 pointsr/Louqe

Hmm I’ve shared the link before. They’re from amazon. Just some rubber sub woofer feet. I use double sided tape to get them to stick. Hudson Hi-Fi Silicone Isolation... https://www.amazon.com/dp/B075KPHZPF?ref=ppx_pop_mob_ap_share

u/HelloBloom · 2 pointsr/Louqe

£200!?

The first result on Amazon is £75
www.amazon.co.uk/dp/B07D99S8Z7/

Or get the 4Tb ones I did off eBay for £80.

u/liv2powski · 1 pointr/Louqe

Found this guy on amazon. Stupid question, any idea if other hardware is needed to connect the grill to the fan?

OKGEAR 120mm Fan Grill/Guard - Black https://www.amazon.com/dp/B005VRK5YS/ref=cm_sw_r_cp_api_i_1kLUDb646V4CH

u/DumbledorePool · 1 pointr/Louqe

so this one should be fine?

https://www.amazon.com/gp/product/B07F84FJ1G?pf_rd_p=183f5289-9dc0-416f-942e-e8f213ef368b&pf_rd_r=MQD2HE0K7M5B400ZNTAK&th=1

Edit: they have two styles listed, sf and sf platinum. in the picture the sf platinum appears bigger, not sure if that to show the size or if it doesn't have an meaning. Guessing SF Platinum 600 would be okay for my Ghost S1 build?

u/OG_PANDA_KING · 1 pointr/Louqe

https://www.amazon.ca/Innovation-Cooling-Graphite-Thermal-Pad/dp/B07CK9SHZG

Read up on the proper application method for the paste. I believe you need to spread a thin layer throughout.