Best products from r/Mandalorian
We found 20 comments on r/Mandalorian discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 19 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Paterson Print Squeegee, 255
- Removes excess water from the copies.
- Does not damage the image.
- For prints up to 40.6 x 50.8 cm
Features:
2. 3M 90030 Professional Faceshield Replacement Window
Tough, polycarbonate, replaceable windowProtects face and neck from chemical splash and flying particlesCrown protector is made of high strength thermoplastic materialPatented window attachment system is easy to replaceMeets ANSI Z87.1 - 1989 and complies with OSHA requirements. Made in the USA
4. Cold Steel Kukri Trainer
- Overall Lenght 17 1/4"
- Blade Lenght 12"
- Steel / Material Santoprene
- Handle - 5 1/4" Long
Features:
5. Winsor & Newton Art Masking Fluid, 75ml
Art masking fluid is a pigmented liquid composed of rubber latex and pigmentFor masking areas of work needing protection when color is applied in broad washesConforms to astm d4236Comes in 75-mL bottleAvailable in yellow color
6. MEEDEN Artist Paint Brush Set Professional Silicone Rubber Tip Paint Brushes (3mm + 5mm Nib Width)
- Ideal silicone brush tips in 5 different shapes for each length, including cup chisel, angle chisel, flat chisel, taper point and cup round
- 5 x 8mm and 3 x 7mm silicone tips, perfect size for crafters and painters creating precise and detail works
- Multi-purpose silicone brush pens, shaping, smoothing and wiping out fingerprints while working with polymer clay, removing and appplying masking fluid while painting, or creating any other art crafts like , these versatile and delicate silicone brushes always come in handy
- Soft, flexible yet firm silicone tips, using with ease and easy to clean
- Spray painting wood barrels provide smooth and mellow texture, and high-quality metal casings buckle the silicone tips tightly preventing tips falling off
Features:
7. Funtasma by Pleaser Men's Halloween Walker-130,Brown,M (US Men's 10-11 M)
True to size16.375" Calf Circumference16" Boot Shaft Height
8. Bargain Max Decals - Mandalorian Boba Fett Sticker Decal Notebook Car Laptop 5" (Red)
- Measures 4" Wide x 6" Tall
- Designed for indoor and outdoor use for up to 5+ years
- Simple application process with easy to follow instructions included in every order
- Made from the highest quality Oracal 651 Vinyl
- Proudly Made in USA
Features:
9. Star Wars Men's Darker Boba Fleece Hoodie, Multi-Colored, Large
- Fleece hoody
- Costume hoody
Features:
10. Rubie's Men's Star Wars Deluxe Injection Molded Adult 2-Piece Jango Fett Mask, Multicolor, One Size
Adult Jango Fett mask features injection molded detailingLooks great with your Rubies Clone Trooper Jumpsuit or displayed on a shelfStar Wars costume merchandise from Rubies is officially licensed by Lucasfilms LtdOne size fits most teens and adultsWitches to wenches to vampires to vagrants, from Gr...
11. SW Mandalorian Skull Plastic Auto Emblem - [Silver][3'' x 2 1/2'']
Measures Approximately 3'' x 2 1/2''Made From Durable and Sturdy Molded ABS PlasticRaised Chrome FinishAdhesive Backing for Easy InstallationProudly Made in the USA
12. Celtec Foam Board Sheet - Black - 24 in x 48 in x 3 MM Thick
Outstanding strength-to-weight ratioPrintable – Digital and Screen, Easy to Fabricate, Paint or Laminate, Die CuttableExcellent chemical resistance, Excellent Fire PropertiesSuperior UV PerformanceExcellent Fastening Characteristics
13. Star Wars Men's Darker Boba Fleece Hoodie, Multi-Colored, X-Large
- Fleece hoody
- Costume hoody
Features:
14. Rust-Oleum 302597 Series Chalked Ultra Matte Spray Paint, Tidal Pond
Use on a variety of interior surfaces like wood, metal, ceramic, canvas and easily distress to create a vintage lookOil-based formula provides ultimate hide with a timeless lookDries to the touch in just 20 minutes and covers up to 12 sq ft, 1-coat coverage allows projects to be completed easilyExce...
15. Flylong Mandalorian Banner Man Cave 30x50Inch
Three metal grommets for attaching to a flag poleMade of Polyester with Double-Stitched Flyends for DurabilityPerfect for your Home Flagpole, Tailgating, or Wall Banner Decoration
You can get the original parts online. That's what I did for my Fett.
The security blade is made from part of the squeegee, a piece of plastic and some metal rods (I got these from CombatBaby on TDH). I used a small section of pipe for the jetpack adjustment tool.
I saw you were also asking about a holster. You can get that from Kcr7pr or Fett Pride on TDH. It's pretty expensive...
looks pretty good so far! Here is what mando mercs uses for visor plastic btw if i remember correctly. You can of course get clear and tint it any color you want.
https://www.amazon.com/3M-90030-Professional-Faceshield-Replacement/dp/B000BOABVI/ref=sr_1_10?s=lawn-garden&ie=UTF8&qid=1478425698&sr=1-10&keywords=safety+face+shield
Still awaiting its arrival but like i said theres one on amazon for very reasonably just requiring some lite modification and finish work.
Hopefully this doesnt get removed.
https://www.amazon.com/dp/B000H3UJJ2/ref=cm_sw_r_cp_apa_eZqWBb9WYNZWQ
Velcro, magnets, and snaps are all common. Chicago screws are an option, but less common.
Velcro us the most forgiving. You can adjust as needed after application, but over time it may lose its stick. This can be minimized by never taking off the plates
Magnets are a good choice and what I would choose to use personally, as it let's you take off the plates for cleaning/transport. Epoxy magnets to the plates and sew washers or similar into the vest.
Snaps are gonna give you a more solid attachment than either magnets or velcro, but at the cost of requiring absolute precision. If you screw up placement you either have to rivet a new hole in the vest or cut out the epoxy.
Chicago screws ( image here ) are epoxies post side to the plates and are paired with grommets in the vest to make the most secure mounting.
Hey I made a kukri for my kit, I used a kukri prop I got from Amazon. Highly recommend it if you live somewhere you can order from Amazon, it's got a nice weight and is really sturdy (it's a training prop, you can hit hard with it and it won't break). Not to mention it's $10 if you can get free shipping.
Pic 1, before painting
Pic 2, after painting (sorry for the potato quality, I don't have another one handy and can't go take a better picture now)
Pic 3, in sheath (made with worbla and fake leather fabric)
You're already on the right path and looking great. Base silver, mask and spray on top.
First thing stop using toothpaste, go to Micheals, Joanns, or hobby lobby and pick up some liquid latex masking fluid and silicone brushes. Having the right tools will make your job much easier.
https://www.amazon.com/Winsor-Newton-Masking-Fluid-75ml/dp/B005P1ROEY
https://www.amazon.com/MEEDEN-Artist-Professional-Silicone-Brushes/dp/B078XZ1WZ9/ref=sr_1_2?keywords=silicone+paintb+brush&qid=1568208585&s=office-products&sr=1-2-spell
The amount of control you'll get will just be so much better. and that masking fluid will last you a LONG time,
Then study the way paint chips on metal and boba's helmet. You want to make sure you're not just chipping down to bare metal, but in some places chipping down to the color underneath, this will give you some extra depth.
Last is give it a grime wash. Multiple ways to do that, youtube tutorials are your friend as you can see exactly what to do. I take a brown acrylic paint, mix a little black until I get a used motor oil color, then water it down a lot, like whole milk consistency. then I paint the entire helmet with it, let it dry, then lightly sand it off with 320 grit sand paper and repeat. It causes the grime to end up collecting in the recesses, I can control where I want it dirtier by not sanding as much in certain areas, and it scuffs up the paint a bit to give it a more worn in look. Note that your helmets will look cleaner in pictures than they will in person.
Here's some of my stuff for the look I end up with.
https://www.instagram.com/p/Bvp2yROlKE3/
https://www.instagram.com/p/BvxcD9AHiCP/
https://www.instagram.com/p/Bvl7KVxnObg/
I got these off Amazon. Here’s a link Funtasma by Pleaser Men's Halloween Walker-130,Brown,M (US Men's 10-11 M) https://www.amazon.com/dp/B001AH59YE/ref=cm_sw_r_cp_api_i_os4tDbPEQ4TJJ
Wife made it for ya huh? Funny, she must have made the one I have on my car too.
https://www.amazon.com/gp/product/B007GOZO6I/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
here at Amazon
the Vader one is cool too
Found it on Amazon: Mandalorian Skull Chrome Auto Emblem - 3" x 2.5" https://www.amazon.com/dp/B01M190FW9/ref=cm_sw_r_cp_apa_i_703ZCbZ2EG6XH
For you armor you want to look into using something like:
http://www.amazon.com/Online-Metal-Supply-Sintra-Expanded/dp/B00D0RTR0O/ref=sr_1_1?ie=UTF8&qid=1382416884&sr=8-1&keywords=sintra
Using a heat gun you can mold that to just about anything.
https://www.amazon.com/Rust-Oleum-Rustoleum-302597-Tidal-Chalked/dp/B01JB78BW6
Over
https://www.rustoleum.com/product-catalog/consumer-brands/universal/universal-hammered-spray-paint
Then lightly sanded.
hell of a price too
Rubie's Men's Star Wars Deluxe Injection Molded Adult 2-Piece Jango Fett Mask, Multicolor, One Size https://www.amazon.com/dp/B000H3UJJ2/ref=cm_sw_r_cp_apa_i_xtCEDb9VZ56NV
Or Google the dented bucket or mandalorian mercs both pages have templates and material lists
The Bounty Hunter Wars Book 1 Book 2 Book 3
and A Practical Man