Best products from r/MilwaukeeTool
We found 9 comments on r/MilwaukeeTool discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 9 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. FASTCAP Kaizen Foam 57 mm Black
- 57mm (2-1/4") thick x 24" x 48"
- Easy to peel away layers
- Cuts easily
Features:
2. Superior Electric ST13B 1/2" Keyless Drill Chuck 1/2"-20 UNF Mount
Maximum capacity(in): 1/2"Runout(in): 0.013"Minimum Capacity(in): 0.06"Sleeve Diameter (in): 1.7"Mount: 1/2"-20UNF
3. Milwaukee 49-16-2714 REPL EASYLD TRIMMER HEAD
- Milwaukee Easy Load Trimmer Head Is Designed To Meet Landscape Maintenance Professional Needs. Delivers A Simple Line Loading Experience And Can Be Loaded With 25 Ft. Of 0. 080 In. Or 20 Ft. Of 0. 095 In. Trimmer Line In Under 30 Seconds. Clears Up To 16 In. In A Single Pass. Utilizes A Bump Feed Mechanism And Has Extreme Wear Resistance Delivering Longer Life.
- This Product Meets Customer Requirement
- New Out Of Box Defects
- Brand Name: Milwaukee
Features:
4. Spider Tool Holster Set - Improve the way you carry and organize tools on your belt!
EASY TO ATTACH: Holster easily clips on to any regular belt or tool belt and allow freedom of movement without allowing excessive tool movement.SECURE: Adhesive Tool Tab locks securely into the Holster without rotating and works great on all devicesHEAVY DUTY: Tool Holster's nylon compositite and hi...
5. TalentCell Rechargeable 12V 6000mAh/5V 12000mAh DC Output Lithium Ion Battery Pack for LED Strip and CCTV Camera, Portable Li-ion Battery Bank with Charger, Black (Multi-led Indicator)
- Rechargeable DC 12V and 5V USB double output lithium ion battery pack. Voltage range of the 12V output port is 12.6-9V, it is not constant, compatible with most 12 volt devices.
- Compatible with any LED strip light products, CCTV Camera, IP Camera , LED Panel, Amplifier, Modem,Car DVR, Speaker, mobile phone, spectra S2 breast pump and 12V/5V devices, etc. ★★★PLEASE NOTE: The size of our battery output port and power cable are DC5521, please confirm the size of your equipment input port before you order, if it's not DC5521, you need to purchase another power cable to connect your device. Any questions, please get support.
- Multi-led indicator, 5 LED indicators displaying battery percentage.
- TalentCell Lithium-ion Battery Pack also runs robotic telescopes fine.
- Wall plug 12.6V 1A AC/DC Charger and DC 1 Female to 2 Male Power Splitter Cable are included. The size of our battery output port and power cable are DC5521, please confirm the size of your equipment input port before you order. Any questions, please get support.
Features:
6. Stanley STA033728 Fatmax Tape Blade Armor, 8m Length
- Class II accuracy
- Wide 32 mm blade makes reading the numbers easy and improves blade standout up to 3.35 m for easy one person measuring
- Blade Armour coating on the first 100 mm reduces the risk of breaking the tape by 95 percent, whilst Mylar coating delivers up to 10 times more resistant to abrasion
- Three-rivet end hook 40 percent strong than a two rivet hook construction, specially designed hook grabs on side, top or bottom for versatility
- Unit of measure - Metric
Features:
7. Milwaukee Tools 7-Pocket Compact Utility Pouch1680D Ballistic Material Construction with Riveted Seams for 5x Longer Life, features a Quick Attach Belt Loop and Tape Chain
Width (In.): 5-29/32Features: Up to 4x Stronger Riveted Seams; Quick-Attach Belt Loop; Tape Chain; Elastic Bit Holder; Specifically Designed for Low Voltage ToolsMaterial: 1680D Ballistic
8. Milwaukee 4932464664 932464664 Autolock Tape Measure 8m (Width 25mm) (Metric Only)
Autolock Tape measureItem Package Length: 4.8cmItem Package Width: 7.4cmItem Package Height: 9.0cm
9. WN 717.10 Series Stainless Steel Non Lock-Out Type Stubby Hand Retractable Spring Plunger with Pull Ring, 1/4"-20 Thread, 0.31" Thread Length
- Stainless steel Plunger body
- Stainless steel pin and pull ring
- American Standard Series 303
- Has a 0.156” dia pin with a ¼-20 thread x 0.31 thread length, it is stainless steel, it has a pull ring, and this is the type A
- Comes without the optional thread locking patch
Features:
Amazon has full 2’x4’ sheets of Kaizen foam for $32.50, you’d just have to cut them to fit your PACKOUT. The link is for the 57mm (2-1/4”) foam, so may have to browse for the thinner ones if that’s what you need. Fastcap does sell their own adhesive to hold multiple layers together, but you could probably use something like 3M’s Super 77, which can be found at most craft/home improvement stores. Fastcap Kaizen Foam 57mm (2-1/4”) Black
Otherwise you can buy them pre-cut fromKaizeninserts.com for your particular box. Comes in different height/color options, just cost a bit more.
This is probably not what your looking for but This Old Tony swapped the original chuck on his M18 for an aftermarket one that works better for what he does.
Here's the video, the drill starts about 1:00 : https://youtu.be/PMv0noH_j4k
And here's the link to said chuck: Superior Electric ST13B 1/2" Keyless Drill Chuck 1/2"-20 UNF Mount https://www.amazon.com/dp/B003Z2O4CK/ref=cm_sw_r_cp_apa_i_p0nTDbJJB0WZ6
It comes on the new trimmers and was on a few of the solid shaft trimmers from factory as well. Milwaukee Electric Tools 49-16-2714 Easy Load Trimmer Head https://www.amazon.com/dp/B078H9R1FL/ref=cm_sw_r_cp_api_i_T6R1CbK1GSC97
https://youtu.be/S5MLshaYlbI
Check this video. Seems like a decent solution for the sub-par belt clip.
Found it on amazon. I don’t see anything in the rules about posting a link so hopefully it’s allowed. https://www.amazon.com/Spider-Tool-Holster-Set-organize/dp/B07KP54WJ9
I couldn't find the exact one I had bought but here is one that looks identical from amazon and around the same price. https://www.amazon.com/dp/B00ME3ZH7C/ref=cm_sw_r_cp_apa_i_OB8QDbATX0Z44
Stanley STA033728 Fatmax Tape Blade Armor, 8m Length
Go to Amazon and search metric tape measure. There's a few others.
Milwaukee Tools 7-Pocket https://www.amazon.com/dp/B07DFP7TLY/ref=cm_sw_r_cp_apa_i_OuqQDbEJ6NNZ0
They are wood screws that just hold the sheet metal in. I drilled them out with a #7 bit and tapped it 1/4-20 ad threaded these in. You need to use a low profile 1/4" nut driver to drive them in until they bottom out. Then drill out the sheet metal to be 1/16th so they pop in.