(Part 2) Best products from r/Network
We found 22 comments on r/Network discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 52 products and ranked them based on the amount of positive reactions they received. Here are the products ranked 21-40. You can also go back to the previous section.
21. NETGEAR WiFi Range Extender EX3700 - Coverage up to 1000 sq.ft. and 15 devices with AC750 Dual Band Wireless Signal Booster & Repeater (up to 750Mbps speed), and Compact Wall Plug Design
Extended wireless coverage: Adds WiFi range coverage up to 1000 square feet, and connects up to 15 devices such as laptops, smartphones, speakers, IP cameras, tablets, IoT devices, and moreAC750 WIFI speed: Provides up to 750Mbps performance using dual band and patented FastLane technologyUniversal ...
22. NETGEAR AC1200 Dual Band Wireless Access Point (WAC104)
- Fast dual band 802.11ac WiFi at a combined aggregate speed of 1.2 Gbps (300Mbps at 2.4 GHz and 867Mbps at 5 GHz)
- Factory tuned external antennas provide superior signal and far reaching WiFi coverage
- Advanced Security and Flexible Wireless Configuration - access point, and WDS point-to-point, point-to-multipoint wireless bridge mode. Memory:128MB NAND flash and 128MB DDR3 RAM
- Works with all N150, N300, N600 and AC devices. IPV6 support for improved performance
- Easy to setup and configure with WiFi Protected System (WPS) button for easy one-touch client connectivity
- Four built-in Gigabit Ethernet ports to connect to PC, laptops, and other wired devices
Features:
23. TP-Link Omada AC1750 Gigabit Ceiling Mount Wireless Access Point | MU-MIMO, Seamless Roaming & Beamforming | PoE Powered w/ PoE Injector included | Centralized Cloud Access & Free Omada app (EAP245)
- Superior Speeds with MU-MIMO — Designed with the latest 802.11ac Wave 2 MU-MIMO technology, the EAP245 reliably delivers dual-band Wi-Fi speeds up to 1750 Mbps to multiple devices simultaneously.
- Integrated into SDN — Omada Software Defined Networking integrates APs, switches & gateways w/ several control options offered - Hardware Controller, Software Controller & Cloud-Based Controller (Contact TP-Link for CBC Details). Standalone mode applies.
- Cloud Access — Remote Cloud access and Omada app brings centralized cloud management of the whole network from different sites—all controlled from a single interface anywhere, anytime.
- SDN Compatibility — Make sure your devices/controllers are equipped with SDN firmware. (Or upgradable). SDN controllers work only with SDN Access Points, Switches & Gateways. Non-SDN controllers work only with non-SDN APs. Details found on TP-Link website.
- Advanced Wireless Tech — Supports Mesh WiFi, Seamless Roaming, Band Steering, Airtime Fairness and Beamforming technologies.
- Multiple PoE Options for Easy Installation — EAP245 supports both 802.3af/at PoE and Passive PoE power supply, can be either powered by a PoE switch or the provided PoE adapter, making deployment effortless and flexible.
- Limited Lifetime Warranty — Backed by our industry-leading limited lifetime warranty and free 24/7 technical support, you can work with confidence.
Features:
24. TP-Link AC1200 Dual Band Router - Wireless AC Router for Home(Archer C50)
- Upgrade to AC WiFi with speeds up to 1200 Mbps (N300+AC900)
- Fast Ethernet ports, ideal for homes with up to 100 Mbps internet plans
- Stream in 4K on multiple devices while reducing buffering
- Supports Amazon Alexa (router cannot be voice-controlled by Alexa) and works with all WiFi devices, AC and older
- TP-Link Tether app - Easily set up and manage your home network
- 2-year warranty and FREE 24/7 technical support.
Features:
27. TP-LINK (TL-PA9020P KIT) AV2000 GB Powerline Adapter Kit, AC Pass Through, 2 Ports
Standards and protocols : homePlug AV2, HomePlug AV, IEEE 1901,IEEE 802.3, IEEE 802.3u, IEEE 802.3ab.System requirements: Windows 8.1/8/7/Vista/XP, Mac OS, Linux2X2 MIMO with Beamforming establishes multiple simultaneous Connections for you to enjoy higher power line speeds and greater stability2 gi...
28. ARRIS SURFboard (32x8) DOCSIS 3.0 Cable Modem Plus AC1750 Dual Band Wi-Fi Router, Certified for Comcast Xfinity, Spectrum, Cox & more (SBG7580AC McAfee), SBG7580AC-MCAFEE, Black
- 3 products in 1: 32x8 Cable Modem, AC1750 Dual band Wi-Fi Router, 4 Port Gigabit Router
- APPROVED with major U.S. Cable Providers Xfinity and Cox. Compatible with Spectrum (Time Warner, Charter and Brighthouse). REQUIRES Cable Internet Service. Not compatible with ATT, Verizon or CenturyLink
- Cable Modem: 32 DOWNLOAD & 8 UPLOAD channels to maximize your Cable ISP service offerings. APPROVED for plans of 300 Mbps and above. Supports IPv4 and IPv6 – the latest Internet standard
- Router: AC1750 2.4/5.0 GHz Dual-band Concurrent Wi-Fi Router with 4 Gigabit Ethernet ports. Wi-Fi beamforming – max coverage and performance
- Security: McAfee Secure Whole Home Internet with App to monitor and configure.Up to 1.4 Gbps DOCSIS Download Speeds
- Easy Mobile Management - Monitor and control your entire home network from your smartphone.
Features:
29. CHANNEL VISION C-0436 4 in / 8 Out RJ45 Telecom Distribution Module
- Supports up to 8 additional telephone outlets, each up to 4 lines
- Additional modules can be added, can be used as a stand alone
- RJ-31X for security systems, TIA 570 compliant
Features:
30. P3 P4400 Kill A Watt Electricity Usage Monitor
- Choose from the Kill-a-Watt's four settings to monitor your electrical usage
- Monitor your electrical usage by day, week, month, or year
- Features easy-to-read screen
- Electricity usage monitor connects to appliances and assesses efficiency
- Large LCD display counts consumption by the kilowatt-hour
- Calculates electricity expenses by the day, week, month, or year
- Displays volts, amps, and wattage within 0.2 - 2.0percent accuracy
- Compatible with inverters; designed for use with AC 115-volt appliances
Features:
31. TRENDnet 8-Port Unmanaged Gigabit GREENnet Desktop Metal Switch, Ethernet Splitter, Fanless,16Gbps Switching Capacity, Plug & Play, Lifetime Protection, TEG-S80G,Black
- ETHERNET PORT INTERFACE: 8 x Gigabit Ports
- SWITCH CAPACITY: 8 gigabit ports provide high-speed network connections to devices and a 16Gbps switching capacity allows data traffic to flow smoothly, reducing traffic bottlenecks.
- COMPACT FANLESS DESIGN: This Gigabit Ethernet switch has a compact and lightweight metal housing design that is well-suited for desktop installations. Its fanless design is perfect for quiet environments that require silent operation.
- ENERGY SAVINGS: This 8 Port switch includes GREENnet technology that provides cost savings and reduces power consumption by up to 70%, by limiting port power consumption during periods of low link utilization.
- DATA TRANSFER RATE: The gigabit switch Data Transfer Rates-Ethernet: 10Mbps (half duplex), 20Mbps (full duplex), Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex), Gigabit: 2000Mbps (full duplex)
- TRENDnet LIFETIME PROTECTION: All metal TRENDnet switches come with lifetime manufacturer protection.
- Temperature : Operating: 0 Degrees ~ 40 Degrees Celsius (32 Degrees ~ 104 Degrees Fahrenheit), Storage: -10 Degrees ~ 70 Degrees Celsius (14Degrees ~ 158 Degrees Fahrenheit )
Features:
32. Klein Tools VDV226-107 Compact Ratcheting Modular Data Cable Crimper / Wire Stripper / Wire Cutter, CAT6, CAT5, CAT3, Flat-Satin Voice Cable
- Wire Stripper, Wire Crimper, Wire Cutter for CAT3, CAT5e, CAT6 and flat-satin voice cable
- Crimps RJ45 and RJ11/12 modular connectors
- Full-cycle ratchet mechanism ensures complete connector termination
- Compact, ergonomic design for natural, single-hand operation
- Direct lateral crimp action provides more even, precise contact termination across all pins
- Quick reference connector wiring diagrams provided on the tool
- Not for use with AMP connectors
Features:
33. Southwire TESTER, M550 CONTINUITY FOR DATA, COAX
RUGGED data/video cable tester perfect for any electrician to quickly detect wiring faults in network and coax cablesTEST patch cables or installed cables, shielded, unshielded twisted pair, and coaxIDENTIFIES correct wiring, opens, shorts, reversals, miswires split pairs, and shielded cablesINCLUDE...
34. TP-LINK TL-PoE150S PoE Injector Adapter, IEEE 802.3af compliant, up to 100 meters (325 Feet),Gigabit -10/100/1000,Black
- 【Convert Non-PoE to PoE】With no need to replace your existing non-PoE switch/device, you can easily have PoE enabled with the use of TL-PoE150S
- 【High Speed Gigabit Ports】Experience lightning-fast wired speeds with 1× Gigabit Ethernet Input Port + 1× Gigabit Ethernet Output port
- 【802.3af PoE Compliant 】TL-PoE150S supplies power and data via one single ethernet cable to 802.3af PoE devices and expands network to areas with no power lines or outlets
- 【Plug and Play Installation】Easy setup with no software installation or configuration needed
- 【Long Range Transmission】Deliver Power up to 100 meters (328ft.), perfect for IP cameras or access point deployment in large areas
- 【Auto Detect Power】With Auto Detect technology, TL-PoE150S determines and delivers the exact power supply to your devices wiith up to 15.4W power output.
Features:
35. Ubiquiti Unifi Security Gateway (USG)
3 Gigabit Ethernet ports, CLI management for advanced users1 million packets per second for 64-byte packets3 Gbps total line rate for packets 512 bytes or largerIntegrated and managed with UniFi Controller v4.xSecure off-site management and monitoring, Silent, fanless operation
36. Ubiquiti AF24 Airfiber 24Ghz Wireless PTP 1.4+ Gbps (Complete kit 2 End Points)
Operating Frequency: 24.05 ? 24.25GHz1.4+ Gbps, aggregate throughput8+ mi (13+ km) rangeWorldwide License-Free 24 GHz frequencyUp to 100x faster than DSL/Cable
37. HDE RJ45 RJ11 RJ12 Cat5 Cat6 UTP Network Cable Tester for LAN Phone Wire Test Tool
- Construct your own patch cables? Test them with this!
- Tests Twisted-Pair Straight & Crossover Cables: RJ-45 & RJ-11
- Requires one 9-volt battery (not included)
- Tester detects if wires are connected correctly; Includes travel case & instruction sheet
Features:
38. Networx CAT5e Network Splitter - Pair
Requires 2 Open Ports on your Switch or Router1 splitter used at patch panel / route or switch and 1 used at outlet to split a single line into 2 cat5e linesAllows 2 x 2 pairs to connect over an existening Cat5e lineNo need to run additional cable since both splitters must be used on both sides of a...
39. QSFPTEK 10G SFP+ Bidi Transceivers LC Single-Mode Module for Cisco SFP-10G-BXD-I (1330nm-TX/1270nm-RX) / SFP-10G-BXU-I (1270nm-TX/1330nm-RX),10KM, with DDM - 2 Pair
- Compatible for Cisco SFP-10G-BXD-I/SFP-10G-BXU-I.
- 10G SFP+ Bidi Transceivers: 10Gb/s data rate, simplex LC connector, Wavelength: Up: TX1270nm/RX1330nm; Down: TX1330nm/RX1270nm, the transmission distance up to 10km, working temperature: 0℃ ~ +70℃, Tx Power(dBm): -6.5 ~ -0.5, Rx Sens.(dBm): < -14.
- Easy to use: Plug and play, hot-pluggable. DDM support: DDM allows you to monitor the critical information, to find out some potential problems.
- 100% high quality products: We always strictly control product quality, every module had been individually tested on switches before shipping, customers can rest assured to buy.
- After-sales Service: 30-day free return, 3-year warranty, lifetime technology support. We offer many compatible options, If you are not sure about the compatibility of your device, please feel free to email us. QSFPTEK is a manufacturer of SFP module, customized service is available.
Features:
40. Ubiquiti LBE-5AC-GEN2-US LiteBeam Wireless Bridge 100Mb LAN,GigE, AirMax AC, White
- Ubiquiti Networks LBE-5AC-GEN2 2x2 MIMO airman litebeam Gen 2 5AC 5GHz 23dBi 450+ Mbps CPE
- The litebeam AC provides 23 dBi of gain for long-distance connectivity and uses a directional antenna pattern for improved noise immunity.
- The litebeam ac us is an ultra-lightweight 2x2 MIMO airman AC CPE device with incredibly.Ble range and disruptive pricing
- Networking interface: (1) 10/100/1000 Ethernet port
- Channel sizes: PTP mode: 10/20/30/40/50/60/80MHz/ ptmp mode: 10/20/30/40MHz
Features:
Well then that leaves you with three options. You could have a repairman come test and replace the cables in the walls. You could use a device like this that turns your power outlet into a network connection. Or you can go the wireless route using a wifi extender like this and install a wireless card in the computer.
These kind of things are available, how much bandwidth do you have? If you have gigabit you might want the expensive ones. If you have 20 megabit then just get the cheapest.
https://www.amazon.com/s?k=powerline+ethernet+adapter&crid=10WTONWVYHL9R&sprefix=powerline+ethernet%2Caps%2C177&ref=nb_sb_ss_i_1_18
Any wireless access point can handle this, plug the downstairs switchport into the power line adapter (of course you need the UK version) then the other one into the upstairs router. You can disable the DHCP server on the new router since you only need the one that is downstairs. Or you can just leave it enabled but there is a small chance of issues by double NAT, plus you need to access the upstairs router so it will need a hard coded address if you disable DHCP. And if you have Gigabit you might want something like AC1750 or more.
https://www.amazon.com/NETGEAR-AC1200-Wireless-Access-WAC104-100NAS/dp/B01LFSDZCU/ref=sr_1_3?keywords=wireless+access+point&qid=1574629815&sr=8-3
Those would be fine, these APs from TP-Link are also good value.
Start with reading the IEEE 802 standard. Then 802.1X. Then move into 802.11.
Matthew Gast authored a couple books, 802.11 Wireless Networks: The Definitive Guide (https://www.amazon.com/dp/0596100523/) another for 802.11ac (https://www.amazon.com/dp/1449343147). Start with the beginning and step though the 802.11 standard and groups.
While you could “just Google it”, you won’t learn the why and the what - just the how. If you really want to learn it, Gast’s books are really good at walking through history and standards (which they should, he sits on the IEEE 802.11 committee).
Nope, they are talking about using your electric wiring as ethernet via adapters
This kind of thing:
https://www.amazon.co.uk/TL-PA9020P-KIT-Passthrough-Beamforming-UK/dp/B01FFBN4MO
You could also consider replacing your ISP's router with something better.
Thanks guys, I decided to go with AC1200 router listed in https://www.amazon.com/TP-LINK-Wireless-Dual-Band-Archer-C50/dp/B0168G0KZY?ie=UTF8&ref_=cm_cr_arp_d_product_top .
Thanks. I just ordered this: https://www.amazon.com/gp/product/B076HJ5CVW/ref=ox_sc_act_title_1?smid=ATVPDKIKX0DER&psc=1
Everyday that I don't have this issue solved is costing me $20, $10 for every 10GB "block" that I am over the data cap.
Will this work to make this job a little bit easier?
https://www.amazon.com/CHANNEL-VISION-C-0436-Telecom-Distribution/dp/B0007G6TFM/ref=sr_1_2_sspa?keywords=rj45+telephone+distribution+module&qid=1549680149&sr=8-2-spons&psc=1
I would suggest getting a electricity usage monitor, measure each device in your house (not just the network), and then work on the high consumers. The rated power of a device is the maximum it will draw, the device may be drawing far less. Don't guess, measure.
Something like this, only an appropriate model for your power: https://www.amazon.com/P3-P4400-Electricity-Usage-Monitor/dp/B00009MDBU
If you want to get really into it, look into home automation that instruments each circuit at the breaker panel and continuously records power consumption by circuit.
Depends on whatever other equipment you have. If you just have a normal consumer grade router then any unmanaged switch will do as they're all fairly synonymous. I like the metal TrendNET ones personally here :
http://www.amazon.com/TRENDnet-Unmanaged-Gigabit-GREENnet-TEG-S80g/dp/B001QUA6RA
https://www.amazon.com/Southwire-Tools-Equipment-M550-Continuity/dp/B01ADWQ94A/ref=pd_sim_328_51?_encoding=UTF8&pd_rd_i=B01ADWQ94A&pd_rd_r=8HRG344D53VT73BBKECJ&pd_rd_w=y68zI&pd_rd_wg=6ds0w&psc=1&refRID=8HRG344D53VT73BBKECJ
https://www.amazon.com/dp/B00F6K5SY2/ref=sspa_dk_detail_3?psc=1&pd_rd_i=B00F6K5SY2&pd_rd_wg=1y9Dp&pd_rd_r=WYXRJBKSC3S8VV3277AY&pd_rd_w=RNZu2
This should do the trick, there is better but not with that budget
Yes,
If that access point does not use an AC power adapter, then you will need a Power-over-Ethernet Injector which adds DC power to the cable to power the device.
This is because your router does not have PoE from what i briefly skimmed. If it does, disregard that ish.
Said device: https://www.amazon.co.uk/dp/B001PS9E5I/ref=cm_sw_r_cp_awdb_t1_X.o1CbVJEVEEV
Posted from Android.
Ubiquiti LBE-5AC-GEN2-US LiteBeam Wireless Bridge 100Mb LAN, GigE, AirMax AC, White https://www.amazon.com/dp/B06Y2JH7PV/ref=cm_sw_r_cp_api_i_CsWrDbDGM1AJF
I noticed that myself. I guess NETGEAR just gave up on those.
Ended up ordering one of these.
Do you think it will be a suitable replacement?
https://www.amazon.com/Ubiquiti-Airfiber-Wireless-Complete-Points/dp/B00A51ZOQ4/ref=sr_1_3?keywords=af24&qid=1556897665&s=electronics&sr=1-3
First try different ports, different devices, then check punch downs/ crimps if still have the issue test it with one of these. Network Cable Tester
Addition: This is the actual splitter we are using.