Best products from r/Nexus5

On mobile, but I can recommend some. Really depends on your type of case. If you like minimal, but beautiful cases, go with a Carved wooden case. If you like sort of heavy duty cases but aren't TOO thick, go with a Spigen Slim Armor. (This is what I usually rock because I love the feel, though the back is prone to scratches. If you like cases that are somewhere in the middle, get the Spigen Neo Hybrid. I absolutely love the look of this case, but I switched to a Slim Armor because the sides were a little sharp. Still switch to it occasionally if I want a change of pace.

As for glass screen protectors, do not get the overpriced Spigen ones. Not worth. Go with something like a Nilikin, or if you're like me and you don't like cutouts for anything except the speaker hole, get this intelliARMOR LG Nexus 5 intelliGLASS Is The Smarter Real Glass Scre... http://www.amazon.com/dp/B00KTVBXBU/ref=cm_sw_r_udp_awd_wawIub0JZ3HCT

which I think is amazing.

Right now I have the Trident Aegis. It's not a huge case but it's just big enough to completely protect the phone. It has plugs for the headphone and USB port to prevent small amounts of water from getting in. Been pretty good for 4 months now so I could say it's worth $20.

I also have the Tech Armor Ballistic Glass Screen Protector, it worked fine for me. You use the repair tape before you apply the screen to get rid of any dust. I would try reapplying it. Try shining a bright light on the screen at an angle to make sure it is 100% clean and press down on the screen protector and move pressure toward the edges of the phone.

I have had 3 tempered glass screen protectors, and I successfully applied two of those. One cracked after 3 months, one had a large bubble form, one is currently going strong. It might take a few tries but it is definitely worth it since it offers a lot more protection and it has a much higher rate of perfect application than any normal screen protector.

Are you referring to this rule?
> B. Amazon Affiliate Links (Posts from amazon are fine, but not "Amazon Affiliate" links. This subreddit is to share great deals, not make a profit)

That's talking about posting Amazon links that contain an Amazon Affiliate code in the URL, which sites use to make money by linking to Amazon products. Your link posted here contains a Lifehacker affiliate code, but you can take that out of the url and it'll work fine. Like so:

With affiliate URL:

http://www.amazon.com/dp/product/B00HE5VZNK?tag=lifehackeramzn-20&ascsubtag=[referrer|t.co[type|link[postId|1546503713[asin|B00HE5VZNK[authorId|5727177402741770316

Without affiliate URL:

http://www.amazon.com/dp/product/B00HE5VZNK

Anyway, maybe that's more than you cared to know, but it's good to be aware of.

Well the n5 battery is bigger than your s2 battery. Disable location/Google now when you get it and it will save a ton of battery. Life wise depends mainly on your cell coverage. 3-6hours of screen on time is normal. Things will be better when lollipop comes out but by the time you purchase your n5 it should be out. Get a nice case and a glass screen protector and you'll be good to go. I have the red n5 so I wanted a case to show it off. I got the ringke fusion case for like $10. Its all I use and I love it :) glass screen protector I'd have to say the nilikin protector.

Case- http://www.amazon.com/gp/aw/d/B00EPLTFIS?pc_redir=1413281120&robot_redir=1

Screen protector-http://www.amazon.com/gp/aw/d/B00GQOQKJE?pc_redir=1414054931&robot_redir=1

Nice! I too hate the mounts for the air dock. I bought all three and they all suck equally bad in my car. The CD mount came close but my CD slot is rounded and the mount is flat so can't get it fully in and supported. My plan is to do exactly this but just FYI you can get a plate for that proclip that will give you the 17mm (I believe) mounting ball that fits the dock. It's a pretty common size apparently as several GPS units use it.

Also for Bluetooth I've tried a some that just never work all that great. My Tunelink had to be re-paired to my phone constantly, like daily or more. My cars Bluetooth for calling is absolutely terrible as well. I recently got this thing on Amazon last week and it works like a charm. Even has a wired remote you mount with a mic on it, a multifunction button and also previous and next track buttons.

Kinivo BTC450 Bluetooth Hands-Free Car Kit for Cars with Aux Input Jack (3.5 mm) - supports aptX
http://amzn.com/B009NLTW60

This Nilkin one gets pretty favorable reviews. Seems like one of the better options for less than $20 but there are so many now any of them could be good.

The main differences in tempered glass are:

• thickness. Thicker is more protective. Thinner looks and feels better but is also easier to chip and crack.
  
  
• quality of the rounded edges (if any) Rounding is crucial if you're not using a case or using one with no lip such as myself.
  
  
• quality of the oleophobic coating (if any). How easily fingerprints can be seen and wiped off and gives your finger a smooth glide.
  
  
• quality of the adhesive. Thicker glass has a harder time sticking to the phone's glass, especially some of the less flat areas on the N5's face.
  
  You might have some more luck finding someone who's tried that particular brand in thx XDA N5 Tempered Glass mega thread.

I don't think that the next Nexus phone will be called the Nexus 6. That's why I called the next Nexus phone the 2014 Nexus 5.

But anyways, wireless Qi charging is slower than USB charging, but the great advantage is that if you have a few Qi chargers located around you, you just put your phone down and it starts to charge. The whole idea is to constantly be topping up your battery, not waiting for the battery to hit a critical level and then charging. No messing around with microUSB ports and aligning them properly.

I personally use the official Nexus charger, which has magnets that help to stick your phone to the charger. It's great, but a bit costly:

https://play.google.com/store/devices/details?id=nexus_wireless_charger

The Choe Qi Charger on Amazon looks good for $29.99. Buy two for $60 and have free shipping in the US.

http://www.amazon.com/UPGRADED-Wireless-Charger-Charging-Qi-Enabled/dp/B00C40OG22

I have the Spigen Ultra Hybrid , and I like it a lot. Sure dust sometimes gets inside the case, but it protects the phone great and hardly makes it bulkier at all. Just take off the case once a month and wipe it out, it works great! It is a really solid case also.

>it seems like it is only useful if you do not need to use the phone while it is charging.

While this is true, all the times you're NOT using the phone it's just sitting there on the Qi charger charging anyway. Sure, it charges slower than plugging in an actual cable but it's not that much slower. And it's really easy to just pick it up and go.

I use a Qi mount in my car, and Qi chargers at home and at work. I basically never have to plug my Nexus 5 in unless I'm messing with software stuff. Between putting the phone on my car, work, and home chargers my phone doesn't lose a whole lot of power, and I haven't had to worry about running out of battery for quite some time.

Here's that car mount, by the way... works great for GPS navigation like you mentioned: http://www.amazon.com/gp/product/B00I4BM37K/ref=oh_details_o06_s00_i00?ie=UTF8&psc=1

Spigen 0.15mm glass screen protector (expensive, but worth it for the extra thinness imo, very happy with mine): http://www.amazon.com/gp/product/B00GN1L4NW/

Qi charger (charges quickly, doesn't heat up, good size, not slippery/nice matte finish): http://www.amazon.com/gp/product/B00C40OG22/

Bonus - cheap but awesome IEM setup: http://www.amazon.com/gp/product/B005HP3O9C/ + http://www.amazon.com/gp/product/B00354951S/

I have the Spigen Air Cushion case and I love it, I bought the Neo Hybrid when I first bought my nexus, and between the two, the Air Cushion feels better in the hand, the buttons are easier to push, and I enjoy the clear back personally.

http://www.amazon.com/gp/product/B00FJJ38HY/ref=oh_details_o03_s00_i00?ie=UTF8&psc=1

I'm not completely sure whether it's the best or most popular, but I've had great luck with the Nilkin tempered glass screen protector. Easy application and reasonable price. Link on Amazon

Now I know this isn't the LG one! BUT... I actually just bought this - The Nillkin Fruit Series. It could be one of the best cases I've ever owned. It's light yet very durable. The cover feels very premium and rigid. The actual casing part is also very nice as well. It's an awesome case, I just find I'm not much a fan of flip cases. It does wake/lock the phone too which is nice. I highly recommend it, especially at the price point.

I purchased a few of these inexpensive Qi chargers from Amazon: http://www.amazon.com/gp/product/B00H7YP0YS/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1



I use them at the office, in my car, and on my night stand. They work REALLY well (They keep the N4 charged to 100% even after the battery fills) but for the one I use in my car it kept sliding off on bumpy roads or around sharp corners.



So I did what anyone with a CNC router would do, made my own solution! It works perfectly and looks great. I'm going to try a few other materials because the HDU foam is a little brittle and might crack under a little abuse, but the concept is sound. I went through downtown Baltimore this morning and my phone never budged.
I can obviously make more of these, so would anyone be interested in picking one up? I made mine for my Nexus 4, I would just have to adjust the location of the charger hole so that it lines up with the receiver on the Nexus 5. I'm thinking of making a few out of hardwood plywood and perhaps some ABS plastic if I can find a few sheets of it thick enough.


EDIT: My case is a Ringke Slim, it doesn't affect charging.

PRODUCTION EDIT: I just ordered a big sheet of PVC plastic and bought a few lengths of oak lumber. These WILL be going into production! Watch this space for ordering info, questions, pricing, etc.

LAST EDIT: We're in business! https://www.etsy.com/shop/ArtfulMachined

I'd definitely go with the glass screen protector. It feels more like the actual screen and will help protect some from impacts. I can reccomend this one. Good luck!

I got a Nilkin Glass http://www.amazon.com/Nilkin-Hardness-Tempered-Screen-Protectors/dp/B00GQOQKJE For the price it's pretty good, much better than the cheap ones at ebay (4-5$). I've never had a 30$+ one but they are supposed to be even better. Check out spigen, dbrand if you are ok to fork over that much :)

I got [this] (http://www.amazon.com/gp/product/B00GR8MFPW/ref=oh_details_o02_s00_i00?ie=UTF8&psc=1) for my phone and I absolutely love it. It's a little bulky but it looks pretty great, and I don't even worry when/if I drop my phone. It's a tank but it's nowhere near as beefy as an otterbox defender case. Plus, it's $5, so if I ever want to switch it out for something flashier, it's a snap.

At the age that most of them are, I would say your best bet is to carry a small usb battery and a short charging cable with you.
The other thing that I do is to try and keep it topped up throughout the day with the a very fast charger. The best I've seen are the blackberry chargers like this one. If you look around amazon and ebay, you can find them new for around 10 bucks. I picked one up a few years ago, and it's my favorite charger.

I haven't been able to find a replacement genuine OEM battery for my nexus, and I don't want to risk a knockoff hurting my phone, so I make due.

Also, if you don't mind bulky cases, this is an option

I'd actually recommend this bumper case; http://www.amazon.com/Google-Nexus-D820-Retro-Bumper/dp/B00JBU27WO/ref=sr_1_1?ie=UTF8&qid=1402176555&sr=8-1&keywords=retro+nexus+5+bumper

Its a replica of the N4 bumper case but made for the N5. Obviously not official, but mine has been great. Good feel, nice buttons, and an empty back that doesn't interfere with my wireless charger (or the magnets).

I've had the black bumper since about late December and it was fine at first, played nicely with my screen protector and the buttons were a bit stiff but I got used to it. But around February the case started peeling and causing air bubbles on my screen protector. Then I found this on xda http://www.amazon.com/gp/product/B00JBU27WO and I loved the nexus 4 bumper so much I decided to pick it up. Hopefully it's not a complete waste.

My protector is PET film, I have no experience with it either, but here's the link if you want to look into it:

http://www.amazon.com/Protector-Highly-Transparent-Anti-Glare-Anti-Fingerprint-Lifetime/dp/B00GH5S1NK

I personally use the matte one and it looks lovely. Has a smooth not sticky touch that protectors and screens generally have. Attracts finger grease ezpz though, just a simple wipe and it's OK.

Pretty sure it's not a problem to do what you are asking, although I use a car kit for both streaming and phone calls. My wife and I both have this unit in our cars

http://www.amazon.com/gp/product/B009NLTW60/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

and love it. The sound quality is really good (to our ears, anyway) and it's very reasonably priced. Check out the reviews.

For a screen protector, I would recommend any tempered glass one. I personally have a Niliken and love it.

http://www.amazon.com/Nilkin-Hardness-Tempered-Screen-Protectors/dp/B00GQOQKJE/ref=sr_1_1?ie=UTF8&qid=1395672637&sr=8-1&keywords=nillkin+nexus+5

For a case, I have the Spigen Ultra Hybrid and Slim Armor. Both feel great, minimal bulk, plenty of protection and work fine with the glass screen protector.

http://www.amazon.com/Spigen-Japanese-Protector-Included-Resistant/dp/B00FJJ38HY/ref=sr_1_2?ie=UTF8&qid=1395672687&sr=8-2&keywords=spigen+nexus+5

http://www.amazon.com/Spigen-Slim-Armor-Case-Nexus/dp/B00EV8Y4QI/ref=sr_1_5?ie=UTF8&qid=1395672686&sr=8-5&keywords=spigen+nexus+5

I highly suggest the Spigen Ultra Hybrid. It makes all the buttons flush AND easier to press. It's a really nice case. It's protected my phone from at least 8 or 9 hard drops and it still looks amazing. The plastic on the back is surprisingly resilient to scratches and I love that I can put custom inserts into the case to make it more unique. Originally I bought it with intention of showing off the nexus branding, but I really like one of the inserts that came with the case, so I've been using that.

I have had pay attentions to three cases, all with transparent back:

1. I'm returning a Supcase, the quality is good, just the button is too hard to press, like, really hard. So it's a concern for me now. I don't want a case ruining the look and the use of the phone, so watched lots of comments and video reviews.
   
   
2. Now planning to buy a Rearth, I've heard its button is much much better, but it may have lower build quality compare to Supcase mentioned above, or Spigen.
   
   
3. Spigen based on what I know, button responsiveness is in between Supcase and Rearth cases mentioned above. Some people say its buttons prone to accidental hit, because it's overall flat and hard to tell where it is when not looking at it.
   
   Design aspects of above three cases, Rearth one has the most minimalistic design IMO. Supcase have a bright logo on the side (logos of other two cases are not as obvious), the back of black one not totally transparent. Some say that Spigen one may felt more bulky, considering those straight edges, and it's a bit thicker than Rearth.
   
   Then, official case looks really good, just not sure how well the button response is. It's most expensive, with nice design and high build quality.

That one has ZERO reviews, I wouldn't recommend it. On the other hand I just installed this one a couple of days ago. It's flawless to say the least. If you mess up with the installation and get a bubble or two they will send you a free replacement, at least that's what happened to me. There's clear installation instructions in the package, If you read them first you'll be fine.

How well do the FFC & proximity/light sensors work without cutouts? I have the tempered glass screen protector from Tech Armor (http://www.amazon.com/gp/product/B00IGISU1E) which I absolutely love, it's got a great feel to it--more slippery than gorilla glass. However, it has cutouts for those sensors, which I don't like aesthetically.

http://www.amazon.com/NON-SLIP-Spigen-Japanese-Protector-Excellent/dp/B00EV8Y50S/ref=sr_1_6?ie=UTF8&qid=1395343359&sr=8-6&keywords=nexus+5+spigen

I love it, its super thin, and it comes with a screen protector! Ive had people come up to me and not even know i had a case on it.

I have this on my phone: intelliARMOR. It works like a charm and feels exactly like the original screen.

Asked this around here before but haven't gotten many replies. I have this charger from amazon and it makes noise when it is charging. Its like a really loud watch ticking - can barely hear it over my computer fan, but I wouldn't want it on my nightstand when I sleep.

Has anyone experienced this with that charger, or with any other cheap chargers? Searching around on the internet I haven't found much, but I saw one article mention it can happen with cheap Qi chargers. Just wondering if anyone with a cheap charger has experienced this, and if not, what charger they use.

The official one is stupidly expensive. And when I first got it I was disappointed about it's shape and how hard the buttons were to push.

I have just about every case type out there so about a dozen I think. The spigen ones are good value.

But what I like about the official one is that it's grippy in your hand and sits still if you rest it on your leg or a sloping surface.

I also use an Anker battery in a flip case so am transferring it between cases a lot.
Some cases are hard to take on and off.

For example the SPIGEN Google Nexus 5 Case Protective [Neo Hybrid] [Metal Slate] ... http://www.amazon.co.uk/dp/B00EV8Y684/ref=cm_sw_r_udp_awd_G9ssub0QCEF95

Is tricky even with good technique.

The Spigen Ultra Hybrid Bumper Case for Google Nexus 5 - Black http://www.amazon.co.uk/dp/B00FJJ38HY/ref=cm_sw_r_udp_awd_88ssub0TGEPX6

Is better, but, as you mention getting one where you are can be hit and miss.

There is a very good xda review that concludes that you don't have to spend big bucks. But IMO the official one does all the things I want it to.

i use this bumper. if you had the nexus 4 it's a replica of that one. love the feel and pretty much covers the entire perimeter of your phone leaving the back and front open.

Had the same displeasure of dealing with a cracked N5 screen last week (my first ever).

You can replace the screen/digitizer yourself for about $75, assuming you can follow YouTube instructions and be careful. You can run a quick search in this subreddit and find a very detailed walk-through. However, some people just lose their shit around exposed electronics for whatever reason, so this may or may not be an option for you.

Personally, I have very limited free time due to school right now, so I opted to purchase a new N5 for ~ $150 on Amazon. Arrived in < 48hrs & I still have to option to repair my old one and sell it if I find the time.

Best of luck to you!

EDIT: For future reference, I do highly recommend a tempered glass screen protector if you don't already have one. Combined with a skin or a cheap TPU case, it makes the N5 very scratch/crack/shatter resistant.

Just ordered an N5 to replace my toast HTC M7.

Anyone have any luck with this Qi Car Dock? I found 2-3 companies all selling the same one, all with 4-star or higher reviews.

Also, any good Qi desk chargers that sit at an angle but don't cost an arm and a leg? Wanting something for my desk at work, so cardboard + $5 charger isn't an option. If it can handle my N7 too, that's a bonus.

Finally, any tips for someone coming back to stock from Sense? The only thing I think I'm really going to miss is merged contacts, since I have 2 Gmail accounts + work Exchange.

Here's a two pack for $3 less

Also, upvote for these... I was lucky enough to get a 3 pack back in the day and they're awesome!

I've had great luck with this one

I got one since I bought the N5. I had the original screen plastic layer for like 3 days until my screen protector arrived. No one can notice the screen protector that is on.

Just take your time to put it and you won't even notice it. It's better to be safe than sorry. I'm still on the first one too.

Anker® Screen Protector for Google Nexus 5 [3 Pack] Highly-Transparent Anti-Glare Anti-Fingerprint (Matte) with Lifetime Warranty by Anker http://www.amazon.com/dp/B00GH5S1NK/ref=cm_sw_r_udp_awd_C7c7tb0JYX5EB

Most likely the usb port. Have you done anything, say "odd" with it? These things fail actually pretty often. Luckily, you can easily replace it. To be sure though, I'd try to connect it to a pc and copy a large file to the phone, say 500 mb and see how's the speed.

I really like these flip cases for the extra screen protection. I have red and yellow and they look good and have lasted pretty well. http://www.amazon.com/-/dp/B00GQOQKJE

I just got this wood skin and it looks great, but doesn't have the screen protection of the flip case. http://www.amazon.com/-/dp/B00H9OBL44

I bought this from Amazon a about two months ago.

It's held up really well and has everything you could want out of a tempered glass screen protector.

• My phone with Spigen's Slim Armor & the Tech Armor Ultraclear Ballistic Glass
  
  I think its the best bang for the buck, especially when looking at the price of Spigen's own line of glass screen protectors...

I have this case in white/black:
.

BALLISTIC SG MAXX
.
I use it when I know my phone will be in area's outside the office
I feel pretty confident nothing will happen to my phone unless a tank were to rollover it
.
In the office I use this:
.
Spigen ULTRA HYBRID

I asked not too long ago if I could use a wireless charger with a Ballistic Tough Jacket Maxx and was told that I shouldn't get the Tough Jacket because it costs over $100 and doesn't work with a wireless charger. Also that it would "ruin the user experience", whatever the heck that means.

Anyway, they were wrong on all accounts. The Tough Jacket was $32 (at the time) and it works fine with the charger that was suggested to me, which is the Choe Qi Charger. I ended up not getting the Tough Jacket Maxx because I wasn't keen on the screen protector and I don't need a belt clip. I just got the regular Tough Jacket, which is only $24 right now if you want the plain black. For a screen protector I got a Nilkin Nikay Tempered Glass screen protector.

I LOVE the case, the charger works fine, and the only problem with the screen protector is that there is a tiny area at the bottom, off of the screen, looks like it just doesn't want to stick. It's not a bubble, because I can press on it and it goes away for a little bit. Sooner or later though it comes back. It's not over the screen and it's barely visible so I don't really care. Anyway, I posted links to all the crap I bought. I dig it all, but you know, YMMV. Good luck



Choe Qi Charger

Tough Jacket

Nilkin Nikay Tempered Glass Screen Protector

I find these Blackberry ones are perfect.

Unless you want just a cable? I'm sure any of these will work.

I think you should change the wireless charger instead of messing with it which is now just a piece of scrap. I am also using one to charge my Nexus 5 from almost 1 year and its working fine. I purchased it from http://www.amazon.com/UPGRADED-Wireless-Charger-Charging-Qi-Enabled/dp/B00C40OG22 Hope you will find the information useful.

I would say that the biggest complaint that I have is my battery life. Other than that the phone is fine. Last time I checked, 5-6 hours killed about 48% of the battery life. I know people have different "results" but I use my phone pretty heavily.

My wife has the S4 and she has way better battery life than I do.

The good thing about the Nexus is that the wireless charging is built in. No need to buy anything extra. I bought this from Amazon for about $20.

So instead of buying extra batteries, you can just buy a lot of these and have these lying around (bedroom, desk, office, car, etc) and you could be ok.

I would purchase the assembled frame (Included with screen). Below is a link with an EXAMPLE (Not sure of the quality). Many times people buy a cheap version of these and end up with a LCD that dies in a few days to a month. So read reviews for different suppliers to make your best decision.
------------------------------------------------
http://www.amazon.com/gp/product/B00HB1O1DS/

This. I bought the clear back, black edged one for my red, and it looks amazing.
http://www.amazon.com/gp/aw/d/B00FJJ38HY?pc_redir=1398030156&robot_redir=1

You should definitely check out this tempered glass screen protector: http://www.amazon.com/gp/aw/d/B00GQOQKJE?pc_redir=1407534065&robot_redir=1


It feels exactly the same as the original glass and I don't think I could use a cheap plastic screen protector ever again. Totally worth it and your concerns aren't an issue with this screen protector

http://www.amazon.com/Nilkin-Hardness-Tempered-Screen-Protectors/dp/B00GQOQKJE this is the one I got. So far its working great. No bubbles and the tools it comes with are really good at getting rid of all the dust first. I haven't seen any dust bubbles

I bought a new charging port from amazon for $15 (shipped) and was able to replace it myself from a youtube video over the course of ~15 minutes. It's super easy. Just go slowly and follow the instructions.

Here's the video guide I followed:
https://www.youtube.com/watch?v=qqCEXEmcj4Y

and here's the port I bought:
https://www.amazon.com/gp/product/B00PGMP9E4/

Perhaps unsurprisingly, that is not a "genuine OEM" one, but it worked just fine.

Check out the Spigen Neo-Hybrid or the Spigen Ultra-Fit. I have them both and they work great.

I use the Spigeon Ultra Thin. Like the name suggests, it's thin so it doesn't add to the bulk of the phone and it keeps the phone protected. I've dropped my phone onto concrete a few times from normal standing heights and haven't had an issue. Plus it's cheap.

I printed it on Semi-Gloss photo paper, then cut out INSIDE the black lines (remove the black lines completely) with an x-acto knife. You don't have to be SUPER accurate, but you do need to make clean cuts, so use a fresh blade.

Then you just drop it into a Spiegen Ultra Hybrid case (did I mention that you needed a case with a clear back???)

http://www.amazon.com/gp/product/B00FJJ38HY/

This one http://www.amazon.com/dp/B00C40OG22/ref=cm_sw_r_udp_awd_myx3tb1BFZTRZ works perfectly every time, even with my rugged case.

I love this Nexus 5 Case, Spigen® [AIR CUSHION] [+Screen Shield] Google Nexus 5... http://www.amazon.com/dp/B00FJJ38HY/ref=cm_sw_r_udp_awd_o4uhub106BK3K you can customize it with your own pictures there is even a Photoshop template for it

Good question. I'm sure there are. I have a relatively thin case though. It's not nearly as bulky as an otterbox would be.

http://www.amazon.com/Spigen-Japanese-Protector-Included-Resistant/dp/B00FJJ38HY/ref=sr_1_2?ie=UTF8&qid=1394835010&sr=8-2&keywords=spigen+nexus+5

I have this one, and it works great for music. I don't talk on the phone much, so I haven't bothered setting it up to take calls.

I've been using this one for about four months and it works great.

I have two of these for over a year now and they work great

http://www.amazon.com/UPGRADED-Wireless-Charging-Blackberry-Qi-Enabled/dp/B00C40OG22/ref=sr_1_2?s=wireless&ie=UTF8&qid=1449875599&sr=1-2&keywords=nexus+5+wireless+charger&refinements=p_85%3A2470955011%2Cp_72%3A2491149011

Do you have a CD player? I mean, do you have something that you can put this:http://www.amazon.com/Mountek-nGroove-Universal-Phones-Devices/dp/B004G1L52Q/ref=sr_1_1?ie=UTF8&qid=1398258702&sr=8-1&keywords=cd+slot+mount on?

If you get one of these: http://www.amazon.com/Lerway-Wireless-Power-Charger-Lumia920/dp/B00E9MUNWU/ref=sr_1_3?ie=UTF8&qid=1398258756&sr=8-3&keywords=qi+charger and break it open/glue the guts to the yellow part of the slot mount, you have a pretty sweet QI charger/mount. It seems there arent many options for this, but this worked well for me. I'll try and take some photos today of what I did.

I have this tech armor screen protector and love it.

http://smile.amazon.com/gp/product/B00IGISU1E/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

There was a bubble around the edge of the protector when I first put it on but the case I have sealed the protector down nicely so the bubble disappeared.

http://smile.amazon.com/gp/product/B00FZ14E3S/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

http://www.amazon.co.uk/Non-Slip-SPIGEN-Google-Smooth-Premium/dp/B00EV8Y50S/ref=sr_1_1?s=electronics&ie=UTF8&qid=1450010918&sr=1-1&keywords=spigen+nexus+5

I'm really happy with this non-slip one from Spigen.

I've been really happy with this one.
http://www.amazon.com/Japanese-Protector-Included-Graphics-Resistant/dp/B00FJJ38HY/ref=sr_1_1?ie=UTF8&qid=1426972817&sr=8-1&keywords=spigen+nexus+5+case

I've been using this one for about two months now. It's pretty good since it doesn't add that much bulk. It has a magnet on the cover that turns the screen on and off when you open and close the cover. The shell itself is pretty solid and protects the phone from wear. It is also thick enough to make wireless charging finicky. If you have it at just the right spot, it will charge fine but don't move it or it will stop charging. The material for the cover is good and doesn't scratch the screen nor does it leave any residue. I'm just not confident it will last for too long since it uses it as a "hinge". My guess is it would last maybe 6 months with my use. At that time, it would probably falling apart. I could be wrong, though.

Over all, I like it so far. $10 or so is also cheap in my opinion when compared to others.

http://www.amazon.com/gp/product/B00GQOQKJE/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

and if anyone cares here is the case I am using
http://www.amazon.com/gp/product/B00EPLTFIS/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Other N5 Spigen Amazon listings:

Neo-Hybrid
http://www.amazon.com/SPIGEN-Google-Protective-Hybrid-Protection/dp/B00EV8Y6QQ/ref=sr_1_7?ie=UTF8&qid=1382365918&sr=8-7&keywords=nexus+5+case

Bumper with clear case:
http://www.amazon.com/SPIGEN-Google-Bumper-Release-Hybrid/dp/B00FJJ38HY/ref=pd_sim_e_2

I don't understand the hype with this brand of protectors. They seem ridiculously overpriced and their customer service is pretty shitty.

Been rocking a Nilkin brand glass protector for almost a year without any problems at all (except shattering one when I slammed my phone in the door of my car, but thats hardly a design flaw and it protected the screen perfectly).

http://www.amazon.com/Nilkin-Hardness-Tempered-Screen-Protectors/dp/B00GQOQKJE

Shipping takes a little while as they are direct from China, but they're at least up front about it. When I bought my replacement after the car door incident, estimated shipping was 4 weeks but I had it in 2.

Here are the two things I use...

http://www.amazon.com/ArmorSuit-MilitaryShield-Anti-Bubble-Responsive-Replacements/dp/B00GDW22H8

http://www.amazon.com/Japanese-Protector-Included-Graphics-Resistant/dp/B00FJJ38HY/ref=sr_1_1?s=wireless&ie=UTF8&qid=1415232457&sr=1-1&keywords=spigen+nexus+5

20.00 and I feel completely safe with my N5.

The glass is glued to the LCD panel, not the frame itself. This means you'll have to replace the entire LCD panel, which is quite easy. You could get one for around 30 dollars.

https://www.amazon.com/Google-Nexus-Screen-Digitizer-Assembly/dp/B00HB1O1DS

I got these two things:

A

B

Both working perfectly, considering how cheap they were. Car survived a corner impact on concrete with no damage.

first link when I googled it :)

http://www.amazon.com/Nilkin-Hardness-Tempered-Screen-Protectors/dp/B00GQOQKJE

intelliARMOR LG Nexus 5 intelliGLASS Is The Smarter Real Glass Scre... http://www.amazon.com/dp/B00KTVBXBU/ref=cm_sw_r_udp_awd_FbStub120P1Z1

I really like this case It is a little expensive but I LOVE that it has a 2nd battery in it. This has survived a 30+ ft drop / throw onto concrete with just a small scuff to the case. I also had an issue with the belt holder ( totally my fault screwing around with it) broke it. Asked the vender if they sold the spring for the belt clip and they sent a new belt clip no questions asked. This is a HUGE case but being a bigger guy I have issues with out thicker cases.

After reading through the iFixit teardown, it seems I should get this part since the LCD and the glass are fused. Unless theres an easy way of getting the two unfused

Christ, is this the case you're talking about?

http://www.amazon.ca/Warranty-Zerolemon-Zeroshock-Protector-kickstand/dp/B00IMOCZOA

How does that fit in your pocket?

? link please?

edit: this one? http://www.amazon.com/UPGRADED-Wireless-Charger-Charging-Qi-Enabled/dp/B00C40OG22

Not OEM but this worked for me:
http://www.amazon.com/Google-Nexus-Screen-Digitizer-Assembly/dp/B00HB1O1DS

It's the digitizer and glass together. You may also think about getting a new battery if yours has been less than optimal.

You could try out this kick-ass ZeroLemon case for the N5. I have it and it's saved me countless times. I always end up dropping my phone somehow, and this case helps me a bunch.

I bought this one for the couple N5s I ordered from woot.com a few months ago:

https://www.amazon.com/Spigen%C2%AE-Protector-TEXTURE-Premium-Japanese/dp/B00EV8Y50S/ref=sr_1_1?ie=UTF8&qid=1478194414&sr=8-1&keywords=spigen+nexus+5

The N5s were supposedly 32GB and new for $150, were actually 16GB and refurbished, all of us who ordered got a $70 discount so, eh. Still a little better than my previous n4.

The only issue there seems to be with the case is a little scuffing around the edges after a few months of snapping on and off. Not that noticeable imo.

I have the triangle one from this link (couldn't get it link directly) http://www.amazon.com/Lerway-Wireless-Power-Charger-Lumia920/dp/B00E9MUNWU/ref=sr_1_19?s=wireless&ie=UTF8&qid=1415676358&sr=1-19&keywords=qi+charger

I also have the one they call M3 on there, white circle with black top, both work fine for me

> I'm looking for something like a Spigen Hybrid

How about a Spigen Hybrid?

For the smudgy, cheap screen: get a tempered glass screen protector (I use the Nilkin variety) and make sure it's oleophobic.

I bought this: LG Google Nexus 5 G2 D820 LCD Touch Screen Digitizer Assembly and Frame https://www.amazon.com/dp/B00HB1O1DS

It worked out pretty well. It wasn't perfect, but it did the job.

Something like this? The Nexus 5 has a soldered on battery that can't be replaced easily without desoldering and soldering back and AFAIK there aren't any extended battery packs standalone (without the case). You probably saw something for another phone or just an extended battery case.

Tempered Glass screen protector - http://www.amazon.com/Tech-Armor-Premium-Ballistic-Protector/dp/B00IGISU1E/ref=sr_1_1?s=wireless&ie=UTF8&qid=1407170169&sr=1-1&keywords=nexus+5+tempered+glass

Worth every penny.

I use this case. Only one I tried. I have been very satisfied with it and have had no reason to replace.

THIS is the one I have used for the past year, flawlessly.

If you want a very simple fix by the front housing as well. Like this: http://www.amazon.com/gp/aw/d/B00HB1O1DS? You won't have to deal with glue and there is less that can go wrong.

... Amazon?

https://www.amazon.com/gp/aw/d/B00FJJ38HY/

I use this:

http://www.amazon.com/Japanese-Protector-Included-Graphics-Resistant/dp/B00FJJ38HY

There's a ton of options though. That one is a bit on the thicker side so fee free to look through amazon.

Here is the case I have. Doesn't feel cheap at all and quite premium feeling. It also doesn't hide the cool nexus logo.

http://www.amazon.com/dp/B00FJJ38HY/ref=cm_sw_r_udp_awd_AcHkub0GSVZJP

If you can find the Spigen Neo Hybrid somewhere (they don't have it listed on their shop anymore), it's worked well for me. Two tumbles, once onto exposed asphalt (volume rocker side) / once onto smooth concrete (face down), and it's fine. No issues aside from a few tiny indents/chips in the case.

Also have this tempered glass screen protector on it. That's the same link from when I bought it in 2014 (looked back in order history to find the name), so you will have to search around for a more current purchase option... but that's enough info to get you started.

For my first Qi charger, I bought the CHOE UPGRADED Charging Pad.

Non-mobile version of that link:

http://www.amazon.com/UPGRADED-Wireless-Charger-Charging-Qi-Enabled/dp/B00C40OG22/ref=sr_1_1?ie=UTF8&qid=1394458675&sr=8-1&keywords=B00C40OG22

I bought a shitload of cases and finally settled on something that won't slip around If you're after the slim stuff.

I have the black version of this and love it! http://www.amazon.com/NON-SLIP-Spigen-Japanese-Protector-Excellent/dp/B00EV8Y50S/ref=sr_1_6?ie=UTF8&qid=1396841667&sr=8-6&keywords=nexus+5+spigen

Nova launcher, running last Dev preview of 5.0. http://imgur.com/zCRlcfj

Also using Spigen's Air Cushion case

Excelent case I use it with a normal screen protector that actually came with the case.

I use this one : http://www.amazon.ca/PROTECTOR-GRAPHICS-CUSHION-Release-Resistant/dp/B00FJJ38HY/ref=sr_1_3?ie=UTF8&qid=1397230689&sr=8-3&keywords=spigen+nexus+5

Just the Headphone hole was a bit too small for my Audio Technica headset, but I drilled a bigger one.

I put on a Spigen http://smile.amazon.com/Japanese-Protector-Included-Graphics-Resistant/dp/B00FJJ38HY?sa-no-redirect=1 case almost at day 1 and did not put on a screen protector. I got the case when I saw this: http://www.cnet.com/news/galaxy-s5-bests-nexus-5-iphone-5s-htc-one-m8-in-torture-gauntlet/?ttag=fbwl

Nillkin flip case. Slim, and the sleep/wake up is convenient.

Spigen Slim Armor + Nilkin glass screen protector

I prefer getting them with the frame although I've replaced it both ways. THIS with frame and THIS without frame.

You bought a extra ZL rugged case. The one you are looking for is this one http://www.amazon.com/dp/B00IMOCZOA/ref=cm_sw_r_udp_awd_YVc4tb0BVATW2

I have one of these, it is bulky and took a little bit of figuring out, but it lasts me the entire day now:

http://www.amazon.co.uk/gp/product/B00IMOCZOA/ref=s9_simh_gw_p23_d0_i1?pf_rd_m=A3P5ROKL5A1OLE&pf_rd_s=center-2&pf_rd_r=1XT8NVEAY3GE7A8QE5X8&pf_rd_t=101&pf_rd_p=455344027&pf_rd_i=468294

http://www.amazon.com/gp/aw/d/B00IMOCZOA/ref=mp_s_a_1_1?qid=1418605414&sr=8-1&pi=AC_SY200_QL40

Here

http://www.amazon.com/gp/product/B00PGMP9E4?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00

That's the part we used. As you can see it's a bit more than just the charging port, but it all comes as one unit.

I had the Anker tempered glass protector but it chipped in a few spots just from normal use. I replaced it with a Nilkin tempered glass protector and it's been flawless. No chips, no bubbles.

I don't recommend screen protectors ever since I put a tempered glass on my Nexus 5.

This is what I use right now: http://www.amazon.com/dp/B00GQOQKJE/ref=cm_sw_r_tw_awdm_KcOUtb084RYC6

If my phone drops on the glass part, the first thing to break will be that tempered glass.

Battery case: http://www.amazon.com/gp/aw/d/B00IMOCZOA?pc_redir=1406356514&robot_redir=1

Screen protector: http://www.amazon.com/gp/aw/d/B00HEX44TO?cache=4fd53786a448714935df37ba4db07bfc&pi=SL500_SY115#ref=pd_aw_sims_1

Make sure you follow the instructions on the screen protector for any of them, I didnt,no I pay for it with tiny hairs underneath it at the bottom.

I also use elementalx on my nexus 5 and that's how the case gets me three charges.

Spigen Hybrid

http://www.amazon.com/Japanese-Protector-Included-Graphics-Resistant/dp/B00FJJ38HY/ref=sr_1_3?ie=UTF8&qid=1414548325&sr=8-3&keywords=spigen+nexus+5+clear

But there's not alot of tactile feedback. I do like how you can cut out art and put in the back of your phone. Essentially you can have whatever backing you can cut.

I'm using the factory cable w/a Spigen Ultra Hybrid case and this Qi charger from Amazon:

http://www.amazon.com/UPGRADED-Wireless-Charging-Blackberry-Qi-Enabled/dp/B00C40OG22

Charges decently fast with no heat issues.

I just got mine fixed today $150 in toronto. Was using a [this] (http://www.amazon.com/NON-SLIP-Spigen-Japanese-Protector-Excellent/dp/B00EV8Y50S/ref=pd_sim_cps_44?ie=UTF8&refRID=0ZHM6S7KY4YQR8WRXTRJ) case. It fell flat on its face on a tile floor and the screen broke.

So far I've had no problems using these for my nexus. Prior to owning the nexus, the car mount I used for my note 2 so size and weight isn't a problem.

Screen Protector: Nilkin tempered glass
http://www.amazon.com/gp/aw/d/B00GQOQKJE?pc_redir=1404881006&robot_redir=1

Car Dock: Mountek Universal CD grip
http://www.amazon.com/gp/aw/d/B004G1L52Q?pc_redir=1404991768&robot_redir=1

Wireless charger: Powerbot
http://www.amazon.com/gp/aw/d/B00F6SPYJS?pc_redir=1404911259&robot_redir=1

Case: Caseology Carbon Fiber
http://www.amazon.com/gp/aw/d/B00GM5OAH6?pc_redir=1404877680&robot_redir=1

Why not buy a Ringke Fusion or Spigen Ultra Hybrid instead and use a graphic cutout? Those cases are actually built with durability and protection in mind, whereas custom cases are generally just shitty hard plastic that'll shatter (along with your phone) after a drop.