Best products from r/OP1users

We found 53 comments on r/OP1users discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 65 products and ranked them based on the amount of positive reactions they received. Here are the top 20.

10. UGREEN 3.5mm 1/8" TRS to Dual 6.35mm 1/4" TS Mono Stereo Y-Cable Splitter Cord Compatible for iPhone, iPod, Computer Sound Cards, CD Players, Multimedia Speakers and Home Stereo Systems 3FT

    Features:
  • UGREEN 3.5mm to 1/4 Y stereo cable provides a high quality connection between your laptop or PC with a 3.5mm jack output and AV receiver, amplifier, mixer, Hi-Fi stereo audio system, home theater system, computer sound, recording equipment, or speaker with dual 6.35mm jack inputs. Suitable for all kinds of audio signal transmission and interconnection between electrical appliances.
  • Hi-Fi Sound: This 3.5mm to 1/4 splitter cable brings you pristine and clean sound with high purity copper and multi shielding, ensuring high fidelity sound quality and providing optimal signal transfer. The dual 1/4 to 3.5mm cable is perfect for studio or live performances
  • Solid Nylon Braid Protects Your Cable: This 3.5 mm stereo to dual 6.35 mm mono jack plug audio cable is equipped with a nylon braid against scratching and abrasion, prolonging its lifespan. Note: The length of two Y Splitter Cords is 23cm/9inch
  • Upgraded Durability: The 1/4 splitter to 1/8 cable adopts 24K 15U gold-plated plugs to resist oxidation & corrosion, not only improving the durability but greatly enhancing its sound quality
  • Powerful Connectivity: Solid construction and secure connections on the 3.5mm 1/8" male end and on the 6.35mm 1/4" male connector end.
UGREEN 3.5mm 1/8" TRS to Dual 6.35mm 1/4" TS Mono Stereo Y-Cable Splitter Cord Compatible for iPhone, iPod, Computer Sound Cards, CD Players, Multimedia Speakers and Home Stereo Systems 3FT
▼ Read Reddit mentions

Top comments mentioning products on r/OP1users:

u/fiercepanda · 4 pointsr/OP1users

Hey man. I’m from the US but Here’s my recommendation,

A deck saver:
Decksaver DS-PC-OP1 - Teenage Engineering OP1 Protective Cover https://www.amazon.com/dp/B01M6WFAWX/ref=cm_sw_r_cp_api_i_7Hh1CbJ67NJ2F

A non teenage engineering soft Carrying case:
Soft Carrying Case for Teenage Engineering OP-1 (Black) https://www.amazon.com/dp/B078429PN8/ref=cm_sw_r_cp_api_i_eJh1CbCBVXT45

I use the deck saver with the teenage engineering carrying case because It came with my OP-1 for free. But the off brand case should fit perfectly with the deck saver to keep your OP-1 nice and snug and secure.

If you search this question in the search bar you will also see people discussing using keyboard cases as well. Could work fine too and a bit cheaper.

Have fun!

u/fpgaudio · 1 pointr/OP1users

I travel a lot, and even though the OP-1 does not feel fragile, I was still worried about it. I usually stuff it inside my backback next to some other stuff, and even though I always take it into the cabin, the backback sometimes takes a beating.

So I decided to buy the original softcase, and although it's quite expensive, I love it. Yes, it's not slim and it adds quite a bit of thickness to your OP-1, but it has super soft pillows inside and I have no doubt it will protect the OP-1 if my backback gets thrown around. Plus, I love the little pouch it has, I stuffed the USB cable and a stereo jack cable in there, and it's been great when I'm doing stuff on the go!

u/niandra3 · 5 pointsr/OP1users

I just got a generic 3.5mm antenna from Amazon for $5 which works great. Although from what I can tell, just having headphones plugged in works just as well.

I also invested in the T.E. screen protector.. $15 to help protect the screen of a $900 instrument seems like a no-brainer. I've heard the screen can scratch easily, though that may have just been older models, I'm not sure.

u/nagonigi · 3 pointsr/OP1users

https://www.amazon.com/LTGEM-Logitech-CRAFT-Wireless-Keyboard/dp/B0793MV91J

It's hard shell. Pretty good quality material, it feels like. Did some cutting with an exacto-knife. And really nice fit inside, height wise.

u/TripResort · 1 pointr/OP1users

That looks great! Thanks for sharing.

Here is the amazon link for anyone looking to buy (think it's the same one) https://www.amazon.com/SKB-3I-1209-4B-Military-Standard-Waterproof/dp/B000Z3204Q. I guess check ebay as well, might be cheaper there.

u/mister____mime · 2 pointsr/OP1users

All the time, it really works well as an effects unit / looper for guitar or any other instrument for that matter.

It’s good to run something like this between the guitar and the synth to get a strong clean signal:

https://www.amazon.com/dp/B00E58SW3U/ref=cm_sw_r_cp_api_IVpYAb6JS8Q6T

u/OldmanChompski · 2 pointsr/OP1users

I guess a mixer maybe.
http://www.amazon.com/Behringer-802-Premium-8-Input-Preamps/dp/B000J5XS3C/ref=sr_1_2?ie=UTF8&qid=1426823016&sr=8-2&keywords=behringer

But honestly you should really just use a DAW and a sound interface to record the guitar. It sounds like you're trying to use your OP-1 like its a DAW and thats simply not how it should be used for. Its a synthesizer and sampler. You'd be better off recording into a cheap standalone recorder then to use the OP-1 as a recording tools. Its better at taking samples.

But the mixer would at least allow you to plug both your mic and your guitar into the OP-1 and manage the levels of each. But be careful I've heard that ghost power can blow out the Op-1. I'm not sure if thats input or output that does it.

u/Sizable-sounds · 1 pointr/OP1users

https://www.amazon.com/gp/aw/d/B00NPZ28KM/ref=pd_aw_sim_469_2?ie=UTF8&psc=1&refRID=6SGDNC5JH29Z0X9FV3NS

This case is awesome and I feel protects the op-1 better than the soft case. Recently flew with it and it was fine.

u/thedaniel · 1 pointr/OP1users

I got a traktor X1 case online that was about exactly the right size to hold an OP-1 in one half, and then i put a piece of cardboard on top of it and put a po-12, audio recorder and cables in the top half. It was pretty cheap and it's perfect for me.

UDG Creator NI Kontrol F1/X1/Z1 Hardcase: https://www.amazon.com/UDG-U8410BL-Creator-Hardcase-Protector/dp/B0055CKNE6

u/Cookizza · 1 pointr/OP1users

I got this after seeing how much the official cases were gonna cost.

https://www.amazon.co.uk/UDG-Creator-Hardcase-Protector-U8410BL/dp/B0055CKNE6

The op-1 rattles around inside it a little, but I added a very small amount of padding from another case I had and now it fits snug. I was worried it would not be sturdy but it's been good.

For the money, I'm very happy and padding it out was simple

u/joshpriebe1234 · 2 pointsr/OP1users

Waveshare sh1106, off Amazon. Driving it with the luma display library.

1.3inch OLED Display HAT 128x64 Pixels 4-wire SPI 3-wire SPI I2C interface Embedded Controller Direct-pluggable for Raspberry Pi 2B/3B/Zero/Zero W with Examples https://www.amazon.com/dp/B078D6NXFM/ref=cm_sw_r_cp_apa_AuMWAbFVTA9A0


Regarding the fx, I just got a pisound which is fantastic for that sort of thing. MODEP is really cool, I've been using it to put fx on my guitar to record into the op-1 track.

u/3sleeves · 1 pointr/OP1users

If you want something with no assembly/coding required there is the Novation Audiohub 2x4. My original comment appears to have been removed for some reason, I've copied it below...

Novation Audiohub 2x4.

I recently got one and it's perfect for pairing the OP-1 and iPad. You can set it up to send audio or midi between the two. You can power it with the 9v adapter or using the iPad charger and the USB3 camera connector.

u/WeAre0N3 · 4 pointsr/OP1users

>I don’t need a case that expensive lol.

Yo - check this out. I bought one, and it fits too! https://www.amazon.com/gp/product/B01EY7WAH0/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

u/johnghadimi · 2 pointsr/OP1users

I got this:

https://www.amazon.com/gp/product/B078429PN8/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

​

I also got the decksaver, which I use when I leave my OP-1 on my desk. The case itself has pretty decent protection.

u/BongRipsMcGee420 · 1 pointr/OP1users

Oh, and I grabbed this antenna from Amazon because 20 bucks is ridiculous. ENUODA 3.5mm FM Radio Antenna for Mobile Cell Phone 8.5cm/21cm https://www.amazon.com/dp/B0185KMVOO/ref=cm_sw_r_cp_apa_qC6BybBASNDN0

It works great and it was 5 bucks and some change

u/joelaro · 5 pointsr/OP1users

Ground loop isolator helps. Like this one:
Mpow Ground Loop Noise Isolator for Car Audio / Home Stereo System with 3.5mm Audio Cable (Black) https://www.amazon.com/dp/B019393MV2/ref=cm_sw_r_cp_api_PYJYzbN0G2NCX

u/elevatedstations · 5 pointsr/OP1users

Do get one of these:
https://www.amazon.com/Mpow-Ground-Isolator-Stereo-System/dp/B019393MV2

Mine was super noisey.. to the point where I was thinking about getting rid of it, but that cleared it right up.

u/vinitlee · 2 pointsr/OP1users

Here's one that's on Amazon Prime
https://smile.amazon.com/gp/product/B078D6NXFM/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

The picture isn't right, but it's the board in the build.

u/simonpunishment · 1 pointr/OP1users

Hi there. Get one of these....

https://www.amazon.com/UDG-U8410BL-Creator-Hardcase-Protector/dp/B0055CKNE6

I love TE but the price for the op-1 case is a bit OTT. This one is cheaper and more sturdy. All you have to do is cut a tiny amount of foam from one of the edges.

I should add that this fits the deck saver too, and that it frequently pops up on OP-1 forums.

u/AspergillusTicor · 1 pointr/OP1users

If it's a short run to the mixer you can get away with unbalanced connection, but at least grab one of these to eliminate the ground loop. Also, no charging while playing!