(Part 2) Best products from r/Revolvers
We found 18 comments on r/Revolvers discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 34 products and ranked them based on the amount of positive reactions they received. Here are the products ranked 21-40. You can also go back to the previous section.
21. Wireless Earbuds Bluetooth Earbuds V5.0 with 3D Stereo Pro Sound, 17H Play Time, Noise Canceling Earphones with Built-in Mic and Mono Mode, IPX7 Waterproof, Calls Switch Quick Access to Siri
▼ Read Reddit mentions22. Renaissance Wax Polish 65ml
Can be used on the following surfaces: Wood, leather, paper, Bone, pearl and mother of pearl, gemstones, any kind of metal, photographic prints, enamel, fiberglass, granite, and on and onApply a very thin layer with any soft cloth (a t-shirt will work Fine!), Buff gently, and the surface is sealed a...
▼ Read Reddit mentions
24. OTW Red Dot Gun Sight Laser Picatinny 20mm Standard Weaver Rail Mount for Pistol Handgun Gun Rifle
- Fit into most Gun: The Weaver Rail of Inlook Red Dot Laser Sight is Picatinny 20mm Standard size.
- Higher Accuracy: OTW Red Dot Laser Sight adjust to windage and elevation for day & night shooting. It is anti-vibration, fog-proof and shock-resistant.
- Long Endurance Life: with its covering is made from high-strength Aluminium Alloy and undergoes anti- corrosive treatment. So it has a good endurance life.
- Portable to take: Size is 2.4" x 1.15" x 0.85" or 60mm x 29mm x 23mm. Weight with Battery is 1.65 oz. Voltage: 3 x 1.5v LR44 batteries.
- Further to see: Laser Range : > 100m at night.
Features:
▼ Read Reddit mentions25. Montana X-Treme Copper Cream 6 oz. Bottle
- Mt X-Treme 07025 Copper Cream
Features:
▼ Read Reddit mentions26. Smith & Wesson K/l Frame Square Butt Revolver Grips Hardwood Finger Groove Checkered Handmade #Ksw10
- Electronic/Experimental, Space Rock/Drone
Features:
▼ Read Reddit mentions27. Otis Technology 3 Nylon/3 Bronze/3 Blue Nylon 9 Pack AP Brushes (IP-316-9-BBN)
The nylon brushes are the least aggressive, Meet mil. Spec. And are safe for everyday Use. Recommended for Use on virtually any surface including wood surfacesThe blue nylon brush features stiff bristles that allow for a more aggressive cleanThe bronze and stainless steel brushes give you the abilit...
▼ Read Reddit mentions28. VZ Grips Smith & Wesson K/L-Frame Tactical Diamond Round Bottom (Black)
TEXTURE: Very GrippyUSE: Carry, Tactical, Tournament ShooterMATERIAL: G10
▼ Read Reddit mentions29. NT Hybrid, Inside Waistband (IWB), Holsters for More Than 135 Different Handguns. Left & Right Versions.
KydexLeatherHybridMade in USAOne Year Replacement Warranty
▼ Read Reddit mentions30. Smooth Industries Wood Checkered Grips for Taurus.357 6 Shots Revolver, Medium& Large Frame, New
These grips can fit with Taurus model .357 6 Shot revolverWOOD CHECKERED GRIPSMADE OF HARDWOOD MATERIAL
▼ Read Reddit mentions31. TK Custom Smith & Wesson Extended Cylinder Release/K, L & N Frame Revolvers
Extended Thumb Piece for Competition use on S&W revolvers. K (66) L (686) & N (627) Frame & similar Models. No J-Frame 5-shots!Checkered for non-slip of the thumb during use.Faster opening of the S&W revolver cylinder.Read installation instructions near the bottom of the page, in the product descrip...
▼ Read Reddit mentions32. Safariland J-K2C COMP II Speedloader
- Fits: Dan Wesson .38 / .357; Smith & Wesson 12, 13, 14, 15, 19, 64, 65, 66, 67, 68, K Frame 10, Taurus 66.669,689
- Injection-molded
- Medium-size knob for ease of locking closed
Features:
▼ Read Reddit mentions
Top comments mentioning products on r/Revolvers:
Summary
21. Wireless Earbuds Bluetooth Earbuds V5.0 with 3D Stereo Pro Sound, 17H Play Time, Noise Canceling Earphones with Built-in Mic and Mono Mode, IPX7 Waterproof, Calls Switch Quick Access to Siri
▼ Read Reddit mentions22. Renaissance Wax Polish 65ml
Can be used on the following surfaces: Wood, leather, paper, Bone, pearl and mother of pearl, gemstones, any kind of metal, photographic prints, enamel, fiberglass, granite, and on and onApply a very thin layer with any soft cloth (a t-shirt will work Fine!), Buff gently, and the surface is sealed a...
▼ Read Reddit mentions24. OTW Red Dot Gun Sight Laser Picatinny 20mm Standard Weaver Rail Mount for Pistol Handgun Gun Rifle
- Fit into most Gun: The Weaver Rail of Inlook Red Dot Laser Sight is Picatinny 20mm Standard size.
- Higher Accuracy: OTW Red Dot Laser Sight adjust to windage and elevation for day & night shooting. It is anti-vibration, fog-proof and shock-resistant.
- Long Endurance Life: with its covering is made from high-strength Aluminium Alloy and undergoes anti- corrosive treatment. So it has a good endurance life.
- Portable to take: Size is 2.4" x 1.15" x 0.85" or 60mm x 29mm x 23mm. Weight with Battery is 1.65 oz. Voltage: 3 x 1.5v LR44 batteries.
- Further to see: Laser Range : > 100m at night.
Features:
▼ Read Reddit mentions25. Montana X-Treme Copper Cream 6 oz. Bottle
- Mt X-Treme 07025 Copper Cream
Features:
▼ Read Reddit mentions26. Smith & Wesson K/l Frame Square Butt Revolver Grips Hardwood Finger Groove Checkered Handmade #Ksw10
- Electronic/Experimental, Space Rock/Drone
Features:
▼ Read Reddit mentions27. Otis Technology 3 Nylon/3 Bronze/3 Blue Nylon 9 Pack AP Brushes (IP-316-9-BBN)
The nylon brushes are the least aggressive, Meet mil. Spec. And are safe for everyday Use. Recommended for Use on virtually any surface including wood surfacesThe blue nylon brush features stiff bristles that allow for a more aggressive cleanThe bronze and stainless steel brushes give you the abilit...
▼ Read Reddit mentions28. VZ Grips Smith & Wesson K/L-Frame Tactical Diamond Round Bottom (Black)
TEXTURE: Very GrippyUSE: Carry, Tactical, Tournament ShooterMATERIAL: G10
▼ Read Reddit mentions29. NT Hybrid, Inside Waistband (IWB), Holsters for More Than 135 Different Handguns. Left & Right Versions.
KydexLeatherHybridMade in USAOne Year Replacement Warranty
▼ Read Reddit mentions30. Smooth Industries Wood Checkered Grips for Taurus.357 6 Shots Revolver, Medium& Large Frame, New
These grips can fit with Taurus model .357 6 Shot revolverWOOD CHECKERED GRIPSMADE OF HARDWOOD MATERIAL
▼ Read Reddit mentions31. TK Custom Smith & Wesson Extended Cylinder Release/K, L & N Frame Revolvers
Extended Thumb Piece for Competition use on S&W revolvers. K (66) L (686) & N (627) Frame & similar Models. No J-Frame 5-shots!Checkered for non-slip of the thumb during use.Faster opening of the S&W revolver cylinder.Read installation instructions near the bottom of the page, in the product descrip...
▼ Read Reddit mentions32. Safariland J-K2C COMP II Speedloader
- Fits: Dan Wesson .38 / .357; Smith & Wesson 12, 13, 14, 15, 19, 64, 65, 66, 67, 68, K Frame 10, Taurus 66.669,689
- Injection-molded
- Medium-size knob for ease of locking closed
Features:
▼ Read Reddit mentions
I got grips on Amazon
Smith and Wesson S&W K Frame & L Frame Round Butt Conversion Rosewood Custom Pistol Grips Checkered and Scroll Design with S&W Silver Medallions https://www.amazon.com/dp/B00PRHCOCI/ref=cm_sw_r_cp_apa_8.rIyb4H1EYJF
This is what they look like on my 686+
https://imgur.com/yy7hZO6
I've heard Renaissance Wax works very well for blued guns.
My CS:GO collection! and i just picked up a P2000 last week and been looking for a USP tactical. I think I may get int in 9mm instead of 45 tho. Definitely post yours when its done!
And the laser they use is a totall bullshit one. I've never seen a reputable model of one, seems like a chinese airsoft design.
Maybe I’ve been doing it wrong but I’ve been using Montana extreme copper cream for those problem areas. I have a SP101 in 357 using different types of 357 or 38 sp. Always would burn thru using brass brushes scrubbing away. I use the copper cream be sure to let it sit for 5-10 minutes. Then clean and wipe off, the bottle I guess is expensive but it has lasted me a long time and you don’t need to use a ton. I still use a regular CLP over everything after the heavy solvent cream cleaning.
Montana X-Treme Copper Cream 6 oz. Bottle https://www.amazon.com/dp/B008P8D2KO/ref=cm_sw_r_cp_api_i_6MF0Db79MN242
I got them off amazon . I think they are Smith and Wesson grips
Smith & Wesson K/l Frame Square Butt Revolver Grips Hardwood Finger Groove Checkered Handmade #Ksw10 https://www.amazon.com/dp/B01AIJZ0YI/ref=cm_sw_r_cp_api_i_gZLQCbQ5ZWG4G
Bronze brushes and lead removal cloth:
Otis Technology 3 Nylon/3 Bronze/3 Blue Nylon 9 Pack AP Brushes https://www.amazon.com/dp/B009OX8IXA/ref=cm_sw_r_cp_api_i_7kTzDbN5B7K6T
Birchwood Casey 31002 Lead Remover and Polishing Cloth, 6-Inch x 9-Inch https://www.amazon.com/dp/B00AU67BEM/ref=cm_sw_r_cp_api_i_bjTzDbBRE75ZF
I believe it was this Hurry while you can! This is the last one
https://www.amazon.com/gp/product/B00MBHFZR8/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
https://www.amazon.com/Waistband-holsters-different-handguns-available/dp/B00TVD66BY?th=1&psc=1
Not sure about that one exactly but there are several different ones on the market:
https://www.midwayusa.com/product/1151378188
https://www.amazon.com/TK-Custom-Extended-Cylinder-Revolvers/dp/B07665FP68
https://www.revolversupply.com/cylinder-release/
I think you have the wrong size loader.
You’ll like the Safarilands. You don’t have to twist a knob...you just push them in.
Here’s the size for your gun
https://www.amazon.com/Safariland-J-K2C-COMP-II-Speedloader/dp/B001MYIWP8
https://www.amazon.com/Safariland-J-K2S-COMP-III-Speedloader/dp/B001G6EYM2