Best products from r/Skateboardlove
We found 8 comments on r/Skateboardlove discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 7 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Dime Bag Hardware Angled Wedge Rubber Riser Pads 5/16"-9/16" (8mm-14mm)
- Hold your camera down low or high when filming skiing, snowboarding, skateboarding, auto racing, motocross, BMX/FMX, sporting events and even when boating.
- Cushioned finger groove padded foam handle alleviates the stress of lengthy filming and provides a secure grip, as well as non-slip rubber rails for further securing your camera.
- Made out of high-grade heavy duty ABS impact-absorbent plastic which can handle the toughest abuse.
- Removable accessory shoe mount on the top, which can hold your video light, camera flash or external microphone.
- COMPATIBILITY: Most DSLR, mirrorless, video cameras and other cameras with an 1/4-20 standard tripod hole.
Features:
2. Oldboy Premium Ceramic Skateboard Bearings (608RS ZrO2 at 8 x 22 x 7 mm) for Standard Skate Board Wheels - Good for Longboards, Quad Skates, Inline Stakes, Rollerblades and Scooters Too
- SMOOTHER RIDE: Set of 8 Oldboy ceramic bearings are heavily lubricated to resist drag. Break them in with a few gnarly rides, then experience a new level of smooth
- EXTENDED LIFE: Super hard ceramic balls (7) are pre-lubricated to reduce friction and prevent wear and tears. Perfect for slalom skating, bombing hills, or long-distance cruising
- BETTER THAN STEEL: Don’t settle for metal bearings that promise a long spin time right out of the box, but are prone to rusting and are easily scratched by dirt. Oldboy ceramics are made with indestructible polished glass balls. No worry about rust or damage from dirt with ceramic balls
- LUBE PROTECTED: Heavy lubrication prevents wear and tear, resists damage from water, and helps keep nylon bearing cage from cracking. No matter how fast and hard you ride, these bearings will let you perform like a pro
- AMERICAN OWNED OLDBOY SWAG: You get TWO gnarly stickers inside every pyramid-power box (US patent). Oldboy is American owned
Features:
3. Orangatang Caguama 85 mm 77a Longboard Wheels for Cruising, DIY Electric Skateboards, Eboards (Blue, Set of 4)
- BIG, SMOOTH LONGBOARD WHEELS — Designed for maximum speed, comfort, and momentum for longboard commuting, carving, long-distance pushing, pumping, and electric longboards.
- FAST AND COMFORTABLE — With a large 85mm diameter, the Caguama rolls with incredible speed and plows over cracks, rocks, sticks, and the roughest roads.
- FUNCTIONAL DESIGN — The 56mm contact patch with its surface skin provides confident grip, while the subtly rounded edges help the wheels pass smoothly across pavement cracks.
- HAPPY THANE FORMULA — The original Orangatang urethane formula is fast, smooth, plush, and grippy. Now available in three durometers: 77a (blue), 80a (orange), and 83a (purple).
- LARGE, SUPPORTIVE CORE — The fully exposed 46mm core reduces weight while providing quick acceleration and lots of momentum. Compatible with any electric skateboard that can accommodate Orangatang Kegels, allowing for an even faster and smoother ride.
Features:
5. YYST Skateboard Wall Rack Skateboard Wall Mount - No Board - Show Off Your Board
Higher & STRONGER: 1 Pair skateboard Racks, hold 1 board. 8 Inch, higher than others, more stronger, steady and secure, No tilting forward. One pair of Racks come with 4 screws (The skateboards are NOT included in the package)WIDELY USEAGE: The racks could storage electric skateboards, longboards, p...
6. Parking Block Skateboard Storage, Display, Organizer - Portable Stand
- COMPACT SKATEBOARD HOLDER: This compact stand keeps your boards safe, clean, secure, and out of harm's way. Never again will you have to worry about tripping over your board's wheels as you put on your shoes for work or class.
- KEEPS DIRTY WHEELS AWAY FROM WALLS: Unlike a wall skateboard mount or a skateboard wall hanger, this skateboard holder requires no drilling and has rubber gripping strips on both sides to keep it from sliding around and leaves no dings on your walls.
- PORTABLE: The Parking Block can be easily moved around from bedroom, to garage, to outside, and more. Also serves as a convenient storage solution for longboards and penny boards in horizontal position on any flat surface.
- STORES YOUR SKATEBOARD ACCESSORIES: In addition to keeping your board supported vertically or horizontally, this holder also has a built-in storage compartment for all your hardware, trainers, waxes, wheels, bearings, accessory, or any skateboard tool!
- DESIGNED & ENGINEERED BY SKATEBOARDERS IN CALIFORNIA: Furious about tripping over your skateboard? Fed up with the marks and scratches on your walls? We were too. That's why we created The Parking Block!
Features:
7. SKATERTRAINER A Place for Your Skateboard, Store or Display in Style with an Original Skateboard Stand | The Origami Skate Rack by Skater Trainers
- This freestanding skateboard accessory can be used to hold and display your boards neatly and simply with drilling, screws, or putting holes in your wall.
- Show off your ride and display your complete trick board off with this portable and easy to use skateboard rack that can be brought wherever you are riding at.
- This skateboard stand is a great place to store your Skateboard so it is off the floor and walls. No more tripping on Skateboards, kicking them under the bed. Neatly keep your board where you want and it can be seen by friends and family.
- This is a great gift for anyone that rides. Perfect for all skill levels, beginners to advanced, to hold your skateboard when you're at home or taking a break at the park.
- This creative and minimalist street and vert board holder was engineered and manufactured in the USA.
Features:
It's pretty noticable regarding turning. Also, the big wheels might be the smoothest ride / commute that I've ever had... Setup:
Oldboy Premium Ceramic Bearings for Longboard, Skateboard, Quad Skate, Inline Rollerblades or Scooter Wheels https://www.amazon.com/dp/B075QLMQW6/ref=cm_sw_r_cp_apa_i_lCj3Cb4M58RXY
Tensor Mag Light Skateboard Truck - Silver/Red - 5.25 https://www.amazon.com/dp/B07NNRW55H/ref=cm_sw_r_cp_apa_i_4Dj3CbQZENCH8
Orangatang Caguama 85 mm 77a Longboard Wheels for Cruising, DIY Electric Skateboards, Eboards (Blue, Set of 4) https://www.amazon.com/dp/B07M59PQSN/ref=cm_sw_r_cp_apa_i_9Ej3CbBKDBPEQ
Board
https://www.tristarskateboards.com/skateboards/decks/pop-shape/chocolate/cleveland-chunk-deck-pid-11357
Dime Bag Hardware Angled Wedge Rubber Riser Pads 5/16"-9/16" (8mm-14mm) https://www.amazon.com/dp/B00JXVG3WG/ref=cm_sw_r_cp_apa_i_pJj3CbN0BRAW8
These are the ones I used and it’s working well!
YYST Skateboard Wall Rack... https://www.amazon.com/dp/B078MRS3GC?ref=ppx_pop_mob_ap_share
A Place for Your Skateboard, Store or Display in Style with an Original Skateboard Stand | The Origami Skate Rack by Skater Trainers https://www.amazon.com/dp/B07CT18DH9/ref=cm_sw_r_cp_apa_i_1vzHDbH0VRMZE
Parking Block Skateboard Storage, Display, Organizer - Portable Stand https://www.amazon.com/dp/B01MYZXL42/ref=cm_sw_r_cp_apa_i_swzHDbRFVE5AT
Not sure if this right but Maybe close