Best products from r/TeslaLounge

Here's what I sent to the couple of PMs I got asking similar questions...

I ordered these from Amazon:

Dupli-Color BFM0360 Dark Shadow Gray Ford Exact-Match Automotive Paint - 8 oz. Aerosol https://www.amazon.com/dp/B00407TU5U/ref=cm_sw_r_cp_api_i_4DxwDbP62JVFE

Sandpaper, Premium Wet Dry Waterproof Sand Paper, 45PCS 120 to 5000 Assorted Grit Sanding Paper for Wood Furniture Finishing, Metal Sanding and Automotive Polishing, 9 x 3.6 Inches. https://www.amazon.com/dp/B07KV3VX97/ref=cm_sw_r_cp_api_i_NHxwDb65VSTCX

From there I started off using a 1/4 piece of one of the 240 grit pieces of sandpaper and spent about 5 minutes sanding off all the jagged edges of the curb rash. (Side note for your question: Pressure was about what you'd use with a scrubby sponge to get some stuck on food off a plate for all the sandpaper sheets, regardless of grit.)

Next I tore off a similar sized piece of 400 grit sandpaper and spent another 5 minutes sanding it down further to smooth out some of the larger damaged area into smaller issues.

Repeat another 5 minutes with 600 grit. Then 5 minutes with 1000, and finally 5 minutes with 1500.

Once you are done the damaged area should be shiny bare metal that should feel smooth to a light touch with your finger. (And leveling out the area is not really a problem. As bad as curb rash looks, it's mostly just jagged metal sticking up that gets sanded off. It's really not that deep that you end up with valleys and craters once you are done sanding. Technically, yes, the rim is "thinner" where you sanded, but it's a fraction of a millimeter so, and not really visible to the eye unless you get down real close and look for it.)

Next I cleaned it all off using nothing more than some Windex and a soft rag.

I then used a new small piece of 600 grit and lightly went over the whole area to make some tiny rough areas to help the paint stick to the metal better, and wiped clean the dust.

I then taped the tire and undamaged area of the rim to keep the paint off those parts, and sprayed on the paint using the instructions on the can. (Three light coats 10 minutes apart)

That's pretty much it. Someone else mentioned clear coat but I didn't use it. I though the result I got was pretty dead-on and didn't want to risk a clear coat make it look off or too shiny, then have to do the rest of the wheel to make it uniform - which would have made me then have to do the other three tires in clear coat to make them match as well. But if I down the road I change my mind, adding clear coat is as easy as the painting.

Anyway, it's time and labor intensive, but it's easy. Good luck!

I've never regretted it for a second. I have two kids (1 and 4) I wasn't sure if the white dash would be broght/ distracting but it's not at all and I love it so much. Also EVERYONE thinks it's awesome. Plus it cleans very very well.

I use chemical guys CarGuys Super Cleaner - Effective All Purpose Cleaner - Best for Leather Vinyl Carpet Upholstery Plastic Rubber and Much More! - 18 oz Kit https://www.amazon.com/dp/B071XB18BF/ref=cm_sw_r_cp_api_i_-yEZDbPHFR6W5

Works like a magic. I just spray on microfiber and whip down a few times a month. KEEP THE WHITE😎

1. The model 3 comes with 2 cables: one type 2 cable that you can use in public charging stations and one cable that allows your car to be plugged into a regular socket. This is in Europe, it might be slightly different somewhere else.
   
2. The cable that plugs into a normal household socket (220V in Europe) will add about 14 km of range per hour.
   
3. No idea on this one.
   
4. In your case, it makes sense to get the Tesla wallbox since it will add around 70km of range per hour. It costs around 500 euro for the charger and you will also need to get a licensed electrician to install it. Installation costs vary greatly and depend on the location of the charger and your current house setup. On tesla.com you can find pre-approved electricians for your area and you can usually get a free quote from them for installation costs.
   
5. I drive lots of narrow roads and I do see the sensors turn red and sometime i hear a chime when I park to close to something. It is a non issue, the car is just overly cautious. Autopilot works great on all roads where you can enable it. You cannot enable it on single narrow roads, it only works on multi lane roads.
   
6. The general consensus seems to be that Kenriko's wraps are the best. https://www.amazon.com/Kenriko-Tesla-Model-Brushed-Console/dp/B07CZLGZRR
   
7. After months with the LR AWD, the acceleration still puts a smile on my face. Everytime someone new gets in my car and I show it off, it blows them away. Performance models offer even crazier acceleration, 4.2 seconds is still a lot faster than most cars out there. The beauty of it is that you can just use it all the time too. With an ICE, you need to make sure the engine is warm, it makes a lot of noise which draws attention and you feel like you are hurting the car when you go above 4000 RPM. With a Tesla, you can just push the pedal every time without having to worry about this.

I've had great luck with this product from Amazon. For some reason it's not showing the smaller sizes, but I paid $32 for for 1qt of the concentrated solution with a bottle that makes 8 quarts of mixed solution. I spray it on with some ONR (Optimum no rinse) mixed in, let it sit for about 60 seconds, and then rinse off with a hose and/or ONR dipped microfiber. Alternatively, I pre-treat bugs with this before full washes and it makes things much easier. I also recommend a DIY coat of ceramic coating, I used Cquartz UK 3.0 on mine and the bugs fall right off with the above combination.

​

https://www.amazon.com/gp/product/B01AMMNGO2/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1

I wouldn't even use snow chains. When I got my TM3 the sales rep advised against them, recommended I get tire socks instead. Much easier to use, weigh next to nothing, and work just as well or better than chains. I have these: https://www.amazon.com/gp/product/B079M1PRDJ/ref=ppx_yo_dt_b_asin_title_o01__o00_s00?ie=UTF8&psc=1

You can read an honest review here: https://www.consumerreports.org/cro/news/2016/01/snow-traction-when-you-need-it/index.htm

My set came with gloves :)

Don’t buy the pucks, make ‘em, real easy. Takes about 10mins, only needs a screws/screwdriver. They fit perfectly.

(4 Pack) Rubber Screw On Bumpers - Shed Doors, Sliding Door & Cabinets
https://www.amazon.com/dp/B07GBFD3SH/ref=cm_sw_r_cp_tai_cd1mDb54F70ZV

A&R Sports Ice Hockey Practice Puck, Black - 4 Pack
https://www.amazon.com/dp/B008875XYU/ref=cm_sw_r_cp_tai_Kd1mDb7DYT2CB

Costco rotation and winter tire exchanges are super cheap, and they have the right lift gear, used to Tesla’s etc.

Try out something like meguiar's clay bar or some such. Also, for lubricant, their quick detailer or something like Adam's detail spray I have noted below while claying works best for me. Also, when claying, I have found that after making a couple passes, if the clay has dirt in it, is discolored, or something similar, I use a hand slicer like below to remove the contaminants quickly.

​

https://smile.amazon.com/dp/B001QVGUMO/ref=sspa_dk_detail_0?psc=1

https://smile.amazon.com/dp/B001QGPHXM/ref=psdc_289783_t2_B0090JINY2

I tried several controllers, and here’s what I went with.

My son and I really preferred our PS4 Dual Shock controllers with the Model 3, but we didn’t want to commit them to the car because we wanted to keep them for our PS4 Pro.

We also tried the Logitech F310, and they felt too flimsy.

We settled on a set of Xbox knock offs from Amazon called EasySMX

They feel decent, work well with Cuphead and the racing game, and they fit well in the armrest.

thanks for everyones help. I ended up trying this off amazon because it was 1 day delivery and I could return it no hassle if it didn't work: https://www.amazon.ca/gp/product/B07Q9L6DJN/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Works Great!!

Now that I think about it OP, why not just patch it yourself? Patch kits are super cheap, and it looks like you have the tire off anyway? Tons of Youtube videos on how to do this, and it would only take you probably 15 mins? Worth a shot maybe?

https://www.amazon.com/Slime-1034-T-Handle-Tire-Plug/dp/B000ET525K/ref=sr_1_29?crid=20AWTIR9UX41A&keywords=tire+patch+kits&qid=1573233453&sprefix=tire+patch+%2Caps%2C206&sr=8-29

K I've read several people use that car guys super cleaner. Is that all you put on your interior ever or do I need to add a UV protector after like 303 UV protectant?

https://www.amazon.com/303-30382-Protectant-plastic-finished/dp/B0185PU38A/ref=sr_1_2?keywords=303+aerospace&qid=1573275554&s=automotive&sr=1-2

My kid is finally big enough for a backless booster! We got this one on Amazon and it’s been great. Color really pops on the white seats too!

Cosco Topside Booster Car Seat - Easy to Move, Lightweight Design (Turquoise) https://www.amazon.com/dp/B00IP8AEXC/ref=cm_sw_r_cp_tai_hGwjDbD2VCXYF

Do you like it?

Great Protector: The Mud Flaps protect the lower portions of your Model 3 from snow, salt, sand, rocks and other debris your wheels throw around. https://www.amazon.com/Tesla-Model-Flaps-Splash-Guards/dp/B07V36S77Y/ref=sr_1_38?crid=3S89N90SE48S9&keywords=tesla+model+3+accessories&qid=1564543763&s=gateway&sprefix=model+3+acc%2Caps%2C410&sr=8-38

Everyone has their own preference, but I have had great success with this: https://www.amazon.com/Samsung-MUF-128AB-AM-Plus-128GB/dp/B07D7PDLXC/

Had it since day one (June/2019) with no issues. Review and reformat twice a month on average. No issues.

You can always just install a new outlet yourself. Go turn it off at the breaker, disconnect the old outlet, install a nice new NEMA 14-50R. You can check the breaker to see what the amperes are and down regulate your car to match that. You could have an electrician come out and update your break if it isn't 50+ amps, or you could do that yourself after flipping the mains switch.

All up to you and your comfort level with electricity. Just know, don't play games with it. Either be confident based on sound knowledge or let someone else handle it.

EDIT: This is what I installed in my garage: https://www.amazon.com/Leviton-279-Receptacle-Industrial-Grounding/dp/B00009W3AA

I highly suggest these three things for your S

Car Center Console Fit Tesla Cubby Drawer Storage Box Glasses Box Customized Compatible with fit for Tesla Model X Model S, Black, Wooden & Leather,NOT Fit 2018 Model X & S https://www.amazon.com/dp/B079D2J2WC/ref=cm_sw_r_cp_tai_1gz1Cb9VRPAS2

AutoMuko Car Organizer, Car Console Organizer with 6 Large Pockets, Adjustable Dividers for Keeping Miscellaneous Items Organized- Use in Front or Back to Store Kids’ Toys, Books, Snacks etc https://www.amazon.com/dp/B00VDFSRL0/ref=cm_sw_r_cp_tai_Uhz1Cb5A9PKKN

PROBASTO Tesla Model S Center Container/Cup Holder Tesla Console Container Center Storage Box for Model S 2012 2013 2014 2015 JY Silicone, Black https://www.amazon.com/dp/B07DFF1PGR/ref=cm_sw_r_cp_tai_jiz1CbG0DWTYH

(4 Pack) Rubber Screw On Bumpers - Shed Doors, Sliding Door & Cabinets https://www.amazon.com/dp/B07GBFD3SH/ref=cm_sw_r_cp_api_i_5euSCbAZQ7FQ1

They fit perfectly in model 3 and s points. Probably x too.

I have this one in our M3P- haven’t had any issues Samsung MUF-128AB/AM FIT Plus 128GB - 300MB/s USB 3.1 Flash Drive https://www.amazon.com/dp/B07D7PDLXC/ref=cm_sw_r_cp_api_i_mk9HDbR4SPKVB

I have this in our MS I’ve had to format is a few times but that I think was the early software not the keys fault. SanDisk Ultra Fit 128GB USB 3.0 Flash Drive - SDCZ43-128G-GAM46 https://www.amazon.com/dp/B01BGTG2A0/ref=cm_sw_r_cp_api_i_Wl9HDb2H9GXJ6

I have the taptes one and and works great. Only like $30 bucks right now with the 25% coupon clip. TapTes Model 3 Wireless Charger Dual Qi Wireless Smartphone Charging Pad M3 Car Interior Center Console Accessories for Any Qi Enable Phone, Compatible with Tesla Model 3 - No Software Issue Upgraded https://www.amazon.com/dp/B07Q9L6DJN/ref=cm_sw_r_cp_api_i_QGDADbRMASMPD

No problem! There’s lots of wireless things nowadays.

Amazon should have them. I have a TapTes (US .com site) charger. It came with 2 USB splitters and is really great.

I would recommend that. Lots of people have it.

get the rvparky app,

https://www.rvparky.com/

an extension cord like this could come in handy. https://www.amazon.com/Camco-Extension-PowerGrip-Convenient-Carrying/dp/B002XL2IG8/ref=sr_1_3?crid=1Y123U9WYW3S2&keywords=50+amp+rv+extension+cord&qid=1570469444&sprefix=50+a%2Caps%2C164&sr=8-3

bring a small generator along for your 110 needs, in my opinion running that would be better than running things from the car.

personally I do not care for sleeping in the car and would find rooms in places with l2 chargers.

https://www.plugshare.com/

I bought this $18 Xbox style controller off Amazon, works great and no fussing around with dongles, batteries, etc. https://www.amazon.com/gp/product/B06XB6FRPR/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1

It’s this one Samsung MUF-128AB/AM FIT Plus 128GB - 300MB/s USB 3.1 Flash Drive https://www.amazon.com/dp/B07D7PDLXC/ref=cm_sw_r_cp_api_i_vA0ZCbG3PENJM

I bought this pump: https://www.amazon.com/gp/product/B0036E9VB6/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

​

Combined with this plug kit: https://www.amazon.com/gp/product/B000ET525K/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

​

I don't think the Tesla kit is worth it and I've heard the compound it sprays into the tire is ironically ineffective since Tesla tires have acoustic foam in them.

Sure, this is the one I bought: Camco Heavy Duty 50 Amp RV and Auto Extension Cord with PowerGrip Handle, 6/8-Gauge, Includes Convenient Carrying Strap - 15ft (55194) https://www.amazon.com/dp/B002XL2IG8/ref=cm_sw_r_cp_api_i_0OXYCb8TQ3ZBG

I use this: https://www.amazon.com/dp/B071XB18BF/ref=twister_B074NBKCH1?_encoding=UTF8&th=1

On all surfaces and a nonammonia glass cleaner on the interior class.