Best products from r/TransformersTCG
We found 40 comments on r/TransformersTCG discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 24 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Ultra Pro 3-Compartment Over Sized Black Deck Box, Fits 2 Deck Boxes, 1-Count
- Officially Licensed
- Ultra
- Pro Oversized
Features:
2. BCW Topload Holder (25-Pack), 6x8
Exterior Dimensions:6 5/16 x 8 1/16. Interior Dimensions:6 1/16 x 8 3/16Machine washableStitched border prevents frayed edges
3. BCW 3.5 x 5 - Index Card Topload Holder - 25 Holders per Pack (Quantity of 100)
BCW Topload Holders25 Holders per PackThe BCW 3.5 X 5 Toploader is used to protect, store and display your 3.5x5 photographs, prints and index cards.The PVC used in BCW Toploads contain no plasticizers or stearates. Our high impact grade PVC does not migrate and will not harm your cards, photos o...
4. Ultimate Guard Precise Fit Oversized Card Sleeves (40 Piece),
- Oversized
- Inner sleeves for additioanl protection
- Superior clarity
- Acid and PVC free
Features:
5. Tiny Epic Kingdom Sleeves(88x125mm)-50 Premium
Sleeve size: 88mm x 125mm50 sleeves per pack
6. Mayday Games Custom Tiny Epic Kingdoms Sleeves
100 card sleeves per pack100% Super Clear PolypropyleneSafety Tested and Quality Assured!
7. Ultra Pro Transformers Autobot Symbol Deck Box for Trading Card Games
Transformers Deck Box featuring the Autobots symbolHolds and protects up to 80 standard size trading card game cardsPerfect for cards from popular games such as Magic: The Gathering, Yu-Gi-Oh! and PokémonMade with archival-safe, non-PVC rigid polypropylene materialEach box comes with 1 bonus deck d...
8. Ultra Pro Silver Series 9-Pocket Pages (25 Count Pack)
Genuine Ultra PRO Silver Series 9-Pocket PageStores and protects standard size trading cards measuring 2.5" x 3.5"Made with ultra-clear, archival-safe, non-PVC polypropylene filmPerfect for sports trading cards, and Magic and Pokemon gaming cardsSolid bar seals for strong, durable pockets and made f...
10. Ultra Pro Dual Flip Box Black Mana for Magic (Matte Finish)
New matte finish Leatherette material with debossed Planeswalker and Mana Symbols.Magnet closure; Soft inner liner protects cardsHolds up to 200 collectible cards in Ultra PRO Deck Protector sleevesAdjustable divider allows the dual compartments to hold either 2 decks of 100 cardsOr 2 deck of 80 car...
11. BCW 1-TLCH-3.5X5 3½X5 - Topload Holder
- Holds 3½x5 trading cards, index cards and photos
- Perfect size for magic: the gathering planechase, vanguard, archenemy, or commander cards
- Open on the short side
- 25 holders per pack
- Exterior Dimensions: 3 7/8 x 5 3/16, Interior Dimensions: 3 9/16 x 5 1/8
Features:
12. BCW 8x10 Photo Page 8x10 Photo Pages Photo Storage Binder, Ultra Clear (COMINU038307), 1-Pack
- 20 (twenty) - BCW Pro 1 pocket 8 x 10 photo page
- Holds an 8 x10 photo
- Dimensions: pocket 10 1/2 x 8 1/4 and page 11 7/16 x 9
- Made of heavy- duty polypropylene. Made in USA!
- Don't forget albums & portfolios - each sold separately...
Features:
14. Ultra Pro 25 (Twenty Five Pages) 4-Pocket Coupon Pages (3.5 X 5 inches, top load pockets)
- 25 Count lot of 4 Pocket Coupon Pages (also for 3x5 cards)
- This is perfect for couponers , as you can hold 4 different types of coupons per page!!
- These are also great for index cards and oversized sports cards!!
- Check out other listings for more supply items!!
- Check back weekly, as we are always adding more inventory!
Features:
15. Ultimate Guard 3R Binder Xenoskin Card Sleeves, Grey, Large
- Heavy-duty d-rings: robust and durable d-rings for keeping the pages safely in place, even when the album is heavily loaded
- Reinforced hinges: high-quality mechanics for quick and an easy addition or removal of pages
- High quality inner lining: premium microfiber fabric, soft to the touch
- Xenoskin(tm) texture: innovative cover material with anti-slip texture
- Holds 29 pages with doubled-sleeved cards, 39 pages with single-sleeved cards or 57 pages with unsleeved cards
Features:
16. Logitech HD Pro Webcam C920, Widescreen Video Calling and Recording, 1080p Camera, Desktop or Laptop Webcam
- Full HD 1080p video calling (upto 1920 x 1080 pixels) with the latest version of Skype for Windows; Webcam with 5 foot cable
- 720p HD video calling (upto 1280 x 720 pixels) with supported clients; Full HD video recording (upto 1920 x 1080 pixels). Max Resolution: 1080p/30fps 720p/30fps
- Video compression, Built in dual stereo mics with automatic noise reduction; Automatic low light correction, Tripod ready universal clip fits laptops, LCD or monitors
- Compatible with: Windows 7, Windows 8, Windows 10 or later; Works in USB Video Device Class (UVC) mode: Mac OS 10.10 or later (HD 720p on FaceTime for Mac or other supported video calling clients; Full HD 1080p video recording with QuickTime Player) Chrome OS,Android v 5.0 or above (with supported video calling clients),USB port,Internet connection
Features:
17. Ultra Pro 3 x 4 Super Thick Baseball Card Toploaders, Holds 75pt Cards (Pack of 25)
- 25-Pack Of Toploader Sheets Fits And Protects Cards Up To Three By Four Inches (W X H) In Size
- Made Of Rigid, High-Impact Pvc Material
- Sheets Keep Your Cards Clean And Safe
- Holds Cards Up To 75Pt In Thickness
Features:
18. Dixit Card Sleeves (80x120mm)-100 Standard
- A exhilarating Card Game!
- SLEEVES Magnum Gold Ultra Fit 80x120 mm (100) is fun, easy to learn, and keeps advanced players on their toes
- From the renowned Mayday Games Studio
- Great fun for the entire family
- Includes extensive game explanation and game rules
Features:
19. Ultra Pro 200 Regular TOPLOADERS Standard + 200 Free Sleeves New Top Load Lot
- Quantity: 200 Top loaders
- Keeps cards clean
- 3" X 4"
- Prevents damage
- Card size: 2-1/2 x 3-1/2
Features:
20. IRIS USA, Inc. KP-PC Photo and Craft Case, 18 Pack, Assorted Colors, 4" x 6", Blue/Purple, 18 Count
- The perfect solution to organize and protect photos, small craft items, and more.
- Snap-tight closures keep the contents secure, and rounded corners prevent damage to inner contents.
- Includes 9 purple and 9 blue cases. Each case holds up to 100 photos.
- BPA free, acid free, PVC free, lignin free, and recycle #5
- Single Case Dimensions: 4.75"L x 6.70"W x 1.23"H
Features:
Soft: https://www.amazon.com/gp/product/B07JHZBVQ9/ref=ppx_yo_dt_b_asin_title_o02_s01?ie=UTF8&psc=1
Hard: https://www.amazon.com/gp/aw/d/B000VVCPUG?psc=1&ref=ppx_pop_mob_b_pd_title
I recommend Ultra Pro for soft and hard. BCW does not have a soft sleeve and Ultra Pro's soft sleeve does not fit inside a BCW. With Ultra Pro you can easily double sleeve.
Titan Size Soft (not perfect but best fit. Does not perfectly fit inside the hard one, it will hang out of the top by a few millimeters but the card is fully covered): https://www.amazon.com/gp/product/B00TJQZ31W/ref=ppx_yo_dt_b_asin_title_o02_s02?ie=UTF8&psc=1
Titan Size Hard (not perfect but best fit. Putting a soft inside does hang out of the top a little bit but the card is fully covered): https://www.amazon.com/gp/product/B00V0EYDYY/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
As for combiners, unfolded they are the same size as a regular character so they will fit with these the same way. I leave them fully unfolded inside a sleeve and then use a marker of some kind to show their mode. My tip for that is that a character card is exactly the size of two battle cards. So any spare battle card can be used to cover up one side or the other.
Ultimate Guard Precise Fit Oversized Card Sleeves (40 Piece), https://www.amazon.com/dp/B01CRLUIDS/ref=cm_sw_r_cp_apa_TG42BbF11MT05
picked these up from my LGS and they "fit". I got these as they should be a good inner sleeve for when some good outers are finally available. there is a toploader that has been getting good reviews in this subreddit.
I just bought this. 100 hard-case toploaders for $21.88. Character cards fit in them perfectly.
https://www.amazon.com/BCW-3-5-25-Holders-Pack-Quantity/dp/B001PI5AVK/ref=sr_1_11?ie=UTF8&qid=1541523563&sr=8-11&keywords=toploaders+3.5x5
I'm using both of those products and can confirm they work great. BCW does make those top loaders specifically so those sleeves will fit inside them. It really is the best option for sleeving Metroplex.
I put him in my binder in one of these (BCW 8x10) but that's wholly unnecessary; I just wanted a binder page the same size as the 3.5x5 pocket pages I have for the bot cards.
​
This one works pretty well for me.
https://www.amazon.com/Artist-PRO-Tower-Deck-Box/dp/B01J897R1S/ref=sr_1_9?keywords=Ultra+pro+art+box&qid=1557315471&s=gateway&sr=8-9
I found these to work perfectly for Metroplex
BCW Topload Holder (25-Pack), 6x8
https://www.amazon.com/dp/B00V0EYDYY/ref=cm_sw_r_cp_apa_i_r7jwCb88DD0GN
http://imgur.com/gallery/YgX5RYi
I use the Mayday Games Tiny Epic Kingdom soft sleeves (they fit pretty snug, with almost not excess sleeve at the top once the card is in)
https://www.amazon.com/gp/product/B0187T406K/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
And BCW toploaders. I tried the Ultra Pro toploaders, but didn't like how much space was left inside, the BCW toploaders are a little narrower.
Ultra Pro on top, BCW on bottom, using Mayday Games soft sleeve
(probably need to use either BCW or Mayday Games soft sleeve for the card with the BCW toploader, since the Ultra Pro sleeves might be too big)
Thank you!
Inner sleeve: Tiny Epic Kingdom Sleeves(88x125mm)-50 Premium https://www.amazon.com/dp/B0187T406K
Top loader: BCW 1-TLCH-3.5X5 3½X5 - Topload... https://www.amazon.com/dp/B003C23PFU
Top loader: https://www.amazon.com/dp/B000VVCPUG/ref=cm_sw_r_cp_apa_i_XxWvCbFKXKRNJ
Clear sleeves I've used: https://www.amazon.com/dp/B00O1T0QXM/ref=cm_sw_r_cp_apa_i_CAWvCb4QER4E7
https://www.amazon.com/dp/B01CRLUIDS/ref=cm_sw_r_cp_apa_i_hHWvCbF4KZ7H0
Here's what I ended up choosing based on some of the suggestions here. Once they arrive I'll update on how they worked out.
For the deck I plan to play with: https://www.amazon.com/gp/product/B06XX2BFPL/ref=od_aui_detailpages00?ie=UTF8&psc=1
For the character cards I'm gonna do a 3-ring binder with these pages: https://www.amazon.com/gp/product/B004QVH0RK/ref=od_aui_detailpages00?ie=UTF8&psc=1
​
I'm gonna use these pages in that same 3-ring binder for the cards that aren't currently in my deck rotation: https://www.amazon.com/gp/product/B0711M322D/ref=od_aui_detailpages00?ie=UTF8&psc=1
​
Here is what I use for the sheets:
https://smile.amazon.com/gp/product/B005H7F0RY/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1
For binder I use this:
https://smile.amazon.com/Ultimate-Guard-Binder-Xenoskin-Sleeves/dp/B01C6TH16S/ref=sr_1_2?keywords=ultimate+guard+binder&qid=1561991616&s=sporting-goods&sr=1-2-catcorr
Works extremely well!
These are fine options:
https://www.amazon.com/Ultra-Pro-Oversized-Black-Decks/dp/B0041EV4GK/ref=sr_1_12?keywords=double+deck+box&qid=1557312596&s=gateway&sr=8-12
https://www.amazon.com/Ultra-Pro-Black-Magic-Finish/dp/B00O0ZFLZU/ref=sr_1_14?keywords=dual+deckbox&qid=1557312628&s=gateway&sr=8-14-spell
I have the first one. It easily fits 2 decks and you can take out the piece that makes it into seperate compartments if you want it to hold all your large cards. I do that sometimes for trading, I just keep my battle cards in a regular deckbox if I do.
The second box doesn't do that, though.
I have no idea what to do with Metro, but for the 'normal' sized bots, i've been using these sleeves inside these toploaders and they work quite well.
I used these, they work well.
https://www.amazon.com/gp/aw/d/B003C23PFU?psc=1&ref=yo_pop_mb_pd_title
"ultimate guard: precise fit oversized sleeves". i plan on getting outer ones for the few in my deck but i normally just keep them in the binder with the other character cards
https://www.amazon.com/Ultimate-Guard-Precise-Oversized-Sleeves/dp/B01CRLUIDS/ref=pd_lpo_vtph_21_bs_lp_t_1/133-8220072-3244524?_encoding=UTF8&psc=1&refRID=7ABZEWA3JPA36YVHTB2T
https://www.amazon.ca/IRIS-586000-Embellishement-Assorted-Colors/dp/B01H2NW1P4/ref=sr_1_13?crid=255FBQ6H7QDNU&keywords=iris+photo+storage&qid=1557326220&s=kitchen&sprefix=iris+%2Ckitchen%2C188&sr=1-13
I'm looking to buy these ones, btw.
https://www.amazon.com/gp/product/B01G1GRLSA/ref=ask_ql_qh_dp_hza
This is the mount that I bought. https://www.amazon.com/gp/aw/d/B01N77YBLU?psc=1&ref=yo_pop_mb_pd_title
And the webcam I bought
https://www.amazon.com/Logitech-Widescreen-Calling-Recording-Desktop/dp/B006JH8T3S/ref=pd_aw_fbt_421_img_2?_encoding=UTF8&psc=1&refRID=XTTHK5N4Z767J62PRWEQ
Is this the size you use?
Dixit Card Sleeves (80x120mm)-100 Standard https://www.amazon.com/dp/B004RG5XU0/ref=cm_sw_r_cp_apa_tS85Bb1PKHNKV
https://www.amazon.com/Ultra-Pro-Baseball-Toploaders-Thickness/dp/B00095VCYY/ref=mp_s_a_1_fkmrnull_1?crid=14U5U4X1DGEL2&keywords=75pt+toploader&qid=1556064454&s=gateway&sprefix=75pt&sr=8-1-fkmrnull&utm_source=share&utm_medium=ios_app
https://www.amazon.com/Ultimate-Guard-Precise-Oversized-Sleeves/dp/B01CRLUIDSthese?
and when you say fits like a tight glove, does that mean they are difficult to get on/off (i.e. is the fit right for the transformers character cards).
I had someone recommend those same Ultimate Guard ones to me, but have also seen people say they're just alittle bit too small to be usable at all without bending the card. So I never bothered, was afraid of bending my Nemesis Prime or Battlefield Prime cards :/