Best products from r/Walther

I bought this one on Amazon

It fits better than my N8 Squared original. I carry at 4 o'clock. It's cheap and has served me well. It sits a little low but I like it. I recommend a good belt with this one. I had a Galco Kydex IWB holster for my compact Glock, it had the same type of clip and I always felt I had to carry those with a good belt.

You may also find some on eBay. I always forget to look there.

I LOVE mine. I did add https://www.amazon.com/gp/product/B01D0CTOHE/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

And I love them. Yes the factory grip is good, but everyone who's held my Walther loves the grips.

I don't worry about it. The only time your finger should be on the trigger in a self defense scenario is if you are about to shoot someone. If you're walking around your house finger on the trigger turning corners like in some shitty cop TV show it might be an issue.

Go get yourself an airsoft or a rubber dummy gun and practice walking around your house with a gun drawn but not touching the trigger. Make that habit second nature and it will be easy should the time come.

Edited to add:

Go get this:
https://amzn.com/B00C1P4UUI
Or if you want to make it obvious that it's not a real gun get this

https://amzn.com/B00C1P4VRA

OR if you want to get something that seems to be a pretty decent BB gun get this
https://amzn.com/B004QBFLTY

If you're brave load them up with BBs and see how many dents you put in a wall and lamps you bust.

Yea they are. Threw a set of Meprolights on mine and they are awesome.

https://imgur.com/a/DUMJH

Here they are on Amazon. I paid a few bucks less but still a great deal.
https://www.amazon.com/dp/B0053FI0OU/ref=cm_sw_r_cp_awd_d4h3wbVVQSV34

I just want through this myself. I suggest these because they're almost exactly oem and are super easy to install, as well as being less expensive than trijicons. I installed mine with hemostats, but the "glock front sight tool" makes it easier. I had to add a shim made from a brass casing, but that may have been because I couldn't get a good purchase with the hemostat. Also use loctite.

I use this, along with MPro-7 gun cleaner and oil. I like Hoppes Number 9 gun cleaner better, but it stinks my house to high hell for 2 days, so I tend to use MPRO instead. Hoppes seems stronger and to me, it seems like it cleans quicker and requires less passes in my opinion. Also, nylon brush.


https://www.amazon.com/dp/B00E9LSPTY/ref=cm_sw_r_other_awd_kSK2wb042GTGN


Also, you stated "clean it every once in a while". I'm going to stop you there and say you should clean it after every time you shoot it. Especially if you plan in carrying. Keep your guns clean, always. I'm not a neat freak....my house isn't a disaster, but it's lived in. I'm not good at cleaning my shower, or toilets, or dusting, or mopping, or vacuuming enough....but damn it, my guns are clean. I'm OCD when it comes to that.

YouTube how to strip it down and clean it. There isn't much to it.

Made some minor changes to my PPQ M1. I've never liked traditional 3-dot sights, and usually hate polymer sights, so I swapped out the factory polymer sights for a new metal set.

In front is the Dawson Precision PPQ/P99 0.125" wide ramp/serrated fiber optic. Remove original set-screw for polymer front, install Dawson with a hex-screw and some loctite.

In rear is a Turul Machined tool-steel rear sight (now available on Amazon, FYI). It's black, serrated, with a vertical white line. This is a 0.140" rear notch, and installs with the factory screw and post. Press-down pin to remove original sight, move internal screw to new sight, reinstall as normal. No fitting or hammering required.

Also installed the Apex Flatty trigger, which is as near to a 1911 trigger that I have ever felt in a polymer handgun. It's an amazing addition to an already great trigger mechanism.

I'm using Truglo and I'm very happy with them.

IF You are considering the type of Trij OP posted, either the Trij HDs or the Trij Bright and Tough

The Truglo Tritium Pros are damn near the exact same thing for 3/5 of the price.

Trij pros: Orange front so maybe a little more "pop"

Triglo tri pro pros: Better smoothed rounded edge. Some users complain that the endge finish on the trij HDs was a bit sharp, scratching skin and putting small holes in shirts for CCW weapons. Not an issue with the rounded comfort finish on the trit pros.

As for color, the trit pros are white dot front, blackout rear so still a nice fast sight pickup contrast.

I have a ppq sc. the olight pl mini2 fits like a dream.

Olight PL-MINI 2 Valkyrie 600... https://www.amazon.com/dp/B07MQC3S9B?ref=ppx_pop_mob_ap_share

Usually appendix IWB with a Kydex holster. Bought this one as it looked good for the price. I have the classic but it's basically the same dimensions, so it should work for the M2.

I got mine off of Amazon. Here's a link.

InForce APLc Compact WML Weapon Mounted White Light Auto Pistol 200 Lumens Black AC-05-1 https://www.amazon.com/dp/B075QBQD7D?ref=yo_pop_ma_swf

Yes 4in

Viridian ctl

https://www.amazon.com/gp/aw/d/B07NQPGC2R?psc=1&ref=ppx_pop_mob_b_asin_title

Here’s the exact holster. Just select your model from the list.

I have been carrying a CCP M1 in a DeSantis Gunhide IWB holster for at least a year now without any issues.

DF

I have these for my PPQ

http://www.amazon.com/gp/product/B0048KFEQI?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00

By "glock front sight tool," do you mean this?

Are the mepros plastic or metal? (can't tell and didn't see anything that said one way or the other)

YOU NEED IT

here is what i got, https://www.amazon.com/Barsony-Leather-Harness-Shoulder-Holster/dp/B00DWD0KCU/ref=sr_1_1?ie=UTF8&qid=1524875971&sr=8-1&keywords=ppk+shoulder+holster+barsony

however if i was rich:: https://shop.nightingaleleather.com/Sandpiper-SH-Shoulder-Holster-System-Sandpiper-SH.htm