Best products from r/XWingTMG

CamelCamelCamel shows that the Imperial Raider has been holding at $89 since mid february and it has recently dropped down to $76 (15% drop). It seems that around the holiday season it's price wildly fluctuates from around $80 to as low as $54, but $76 seems like its lowest between-holidays price.

Miniature Market: $85

CoolStuffInc: $85

This isn't by any measure the lowest this ship will get, but if you're hoping to get it in the next 6 months or so this might be the lowest price you'll find.

Not commenting on its playability in epic (as I don't play epic) the Imperial Raider offers the following for the X-Wing player: New Tie Advanced Pilots, four of the TIE/x1 title card, and the almighty Emperor Palpatine.

If you have no interest in playing Imperial then this ship offers nothing to you, and if you're interested in only playing competitively it doesn't offer much on that front either. Vader w/ TIE/x1 has been out of favor in the meta for a while now with the popularity of stress control and Emperor Palpatine was hit pretty hard with a nerf some time back. However Emperor Palpatine and Vader still do have their places in competitive lists occasionally and both are fantastic in casual play.

If you're wanting to fly the TIE Advanced and / or utilize a Palpmobile with the Epsilon / Upsilon shuttle and you're wanting to do it soon then this is a decent discount at $10 off the MM / CSI prices. However if you're not in a rush then I'd wait for the holiday / Black Friday season where you can get this for much, much cheaper.

Depends on how many things you have.

I started with this Plano 3700, but out grew it pretty fast. I have several additional pro-latch boxes of various layouts to hold the added content.

But thats just for storing at home, or (when i play HotAC) allows me to pick the 4 trays i need, put them in, with all the large ships in the top section (with pluck foam to hold them), and carry that.

Now if im just taking a couple built lists to my FLGS to play for a day, i put my play stuff in this Frabill Softbag that holds plano 3600 size trays.

In that, this tournament tray fits to hold my range rulers/maneuver templates and such. (They also make the tray to fit in the 3700 size as well)

The plano trys are good because the compartments can be adjusted to fit the size of the ship to reduce the amount of space thats wasted. I also go a bit further and add some cotton in to protect the ships paint and so they dont rattle around too much.

Here are some (rather old) pics of my collection in it.

I bought a Plano 728 that has been working pretty well for me. It doesn't come with side containers, but I've been told these ones will fit nicely.

A lot of others here have the Plano 732 and I've heard good things about that one as well, but I think it's a little more expensive. It does come with side containers though.

If you have a Wal-Mart nearby, they have pretty good prices on them, but you can also get them online.

The Plano 5231 is where I would start. I have several that I keep mine in (my collection is rather large). The top section will accommodate all the ship tokens, the gameplay tokens and templates & obstacles. The inside will easily fit all that you have along with the dials and damage deck with plenty of room to spare. I am storing complete conversion kit cardboard and a majority of the small ships in the boxes. Adding a bunch of large ships to the collection may present an issue eventually, but you can fit a YT-1300 + another large ship without issues. The Ghost does not fit in the box unfortunately.


Edit: The prices on Amazon for the red plano are not great right now though.



The HDX interlocking series is pretty great, too. The containers lock together making it easy to add to the collection as needed and they are easy to carry. These can accommodate the bigger ships like the Ghost, too. maybe go with this. The price is good, too.

​

I have been having the same issue trying to figure out how I want to store all my dials and tiles. I have noticed that if you want to do binders that the small base tiles fit into the old 1.0 Mini upgrade card sized pages, the medium fit into the Normal card sized pages and the large bases fit into the 4 Slot sheets. In terms of dials I have been reading that people have been using These sheets. I have been on the fence about using binders for these, but I already have a box of 100 mini upgrade sheets from 1.0 that I still have like 80% of because I bought it before 2.0 was announced thinking I would need them. I was considering doing card and coin boxes for them. I know Coin boxes are popular as well for dials and small bases, but for the medium and large I don't really have a solution to those right now. I know I can fit the large into Card boxes, but I don't know if there is a better solution for medium bases.

These are awesome: https://www.amazon.com/D-I-Y-Cases-Gaming-Foam-Custom-Latches-1/dp/B014MYBGAW/ref=sr_1_2?ie=UTF8&qid=1484064373&sr=8-2&keywords=plano+5231

I've gotten mine for around $15, so I'm not sure why this price is so high (at writing it's around $28), but They work great for small ships and a large ship. If you really want to, you can cut out the inside stuff to make room for more large ships. Having the foam pre-cut to fit the box makes everything super easy. I have three of these cases now. One for each faction.

For storage I highly recommend this Plano case. I then have a roll of packing foam to help further protect my ships. I also use some of the leftover plastic packaging that the X-Wing models cam in as dividers to hold things like templates and such. That box will hold a massive amount of ships and everything else that goes with the game, for a long time I even kept my Armada collection in the same box. I also use a separate card storage box, but that's only really necessary if you have a very large collection.

For accessories a set of acrylic movement templates are very nice to have, but are hardly necessary as the cardboard ones hold up pretty well for a while. I've gotten two sets from Curled Paw Creatives and highly recommend them!

I use this Stanley organizer: https://www.amazon.com/Stanley-25-Removable-Compartment-Professional-Organizer/dp/B00005QWYF/ref=pd_yo_rr_bia_t_1?ie=UTF8&psc=1&refRID=XXZR73DK5FA42671GG9D

In it I've got:

• All my pilot and reference cards (except duplicates)
  
• All my upgrade cards
  
• Two damage decks
  
• All focus, evade, stress, ion and other tokens
  
• 9 of each kind of dice
  
• My large ship bases
  
  It could easily store things like bases and dials, I just simply keep those in my foam.
  
  It works really well, the large compartments are perfectly sized for pilot cards, and the medium ones are great for upgrade cards. The smallest ones are good for holding tokens and dice. I'd highly recommend it, and the great part is it's relatively inexpensive and you can always just pick up a second when/if your collection grows!

I have one of those also, it works great for the tokens and cards. The small containers fit the upgrade cards, the larger containers fit the big cards, so far the only thing that doesn't fit are the movement and range pieces. The best part of that the little containers come out. When we play we just take out the shield, focus, evade and stress cups so the tokens aren't floating around loose on the table. I'm going to move the cards over to a binder as soon as I get the binder sheets that hold the upgrade cards.

For the models, bases and dials I purchased one of these: Plano Double Cover Two Sided Tackle Organizer. It fits everything I have, very well. The bases, movement and range finder all fit in the top part, the smaller ships and a few of the larger ships fit in the bottom. I don't think it will fit the Ghost, and I'm not sure what I'm going to do about that ship.

Finally I bought a bunch of single felt sheets in the craft area at Wal-Mart, I cut the felt into strips and use it as a liner for each of the compartments that holds a ship. I'm not sure if will really help that much much but it makes me feel better. For big ships like the Decimator and Falcon I just wrapped them in a piece of felt.

I use Ultimate Guard binders (and sleeves, for what it's worth) for pilots and upgrades, and they protect well, but they're slow to use and a pain to organize. The damage deck I just keep in a bag with my travel token kit, which is a teensy little Plano box.

Speaking of Plano, the default ship storage solution, at least here in the US, is the 1374, which will hold up to approximately 100 ships, plus base chits and dials. No idea if they exist on your side of the pond or not, but if they do, look into them.

If you want to protect your ships a bit better, Sir Willis' micro hangers are the DIY of choice and have the benefit of making you look way more slick and professional than any of us actually are about our little toy space ships.

Feldherr cases work great, if you're willing to pay for them. Since I'm not worried about scratching paintjobs or breaking glued joints on X-Wing like I am other minis, I think foam is overkill. If you want foam but a cheaper option, consider KR Multicase stuff.

When I started the gaming club, I invested in some extra-wide black yoga mats, which I cut down to create several 36"x36" play mats. I used an old toothbrush and a bit of white acrylic paint to lightly splatter some "stars" onto them. Each mat ends up costing about $13, and has lasted for years now with no signs of wear. My favorite thing about them is that the yoga mat surface is really grippy, which helps prevent accidental bumping of ships and asteroids. I like pretty much everything about them, really.

If you're interested, search for "Yoga Accessories Extra Wide and Extra Long 1/4'' Deluxe Yoga Mat" on Amazon, or maybe this link will work:

https://www.amazon.com/Extra-Wide-Long-Deluxe-Yoga/dp/B002PA1KWK/

Was it something like this??

As for me, I was using what /u/Nybear21 suggested, but have outgrown it for two reasons:

• Mainly, I insist on using Sir Willibald's Microhangers and Gearboxes, which takes up more room in the tackleboxes than putting everything in there loosely would cause/create
  
• I have everything from the game, including epics and stuff and there just isn't quite enough room there.
  
  I still highly recommend that tacklebox or something that supports the Plano 3700 series of boxes (the 1374 was the gold standard while it was made, to the point that the top reviews on Amazon were all about X-wing).
  
  As for what I currently use, I bought a bulk of literature mailers (10x10x2 corrugated cardboard) and put those microhangers/gearboxes in there in a stack. The epics are on shelves in display that I carry in their original plastic when I transport them to the store.

This Plano box for storing my extra ships and components. I have 4.

This Plano tacklebox for storing and transporting the lists that I'm currently playing. You can definitely fit all that. I also recommend getting some bubble wrap. They sell it in large rolls at hobby stores like Hobby Lobby. I bought a roll for like $5 a couple years ago and I still haven't used it all. It makes for good padding.

As others have mentioned the Plano makes several great cases that work great for X-wing

Here's what it looks like with ships/dials/bases/tokens inside of it. I caulked the bottom of the trays since they didn't sit flush I can fit almost all of my Rebel fleet inside of it. The only thing I can't fit is a YT-2400, though I took out the Ghost I could fit several more easily. I picked mine up at Harbor Freight on sale for $9

This is the best solution I have found period for the cards: http://img543.imageshack.us/img543/6397/8xvz.jpg (1mb Image)

It hold all my cards both pilots and upgrades with Fantasy Flight Sleeves on all cards. I just put two of the smaller ones sideways in one sleeve pocket and they fit perfectly.

Its avaliable from Amazon here is one such example, just the first one that came up: http://www.amazon.com/Ultra-Pro-PRO-BINDER-Leatherette-Sideloading/dp/B004FVJDV2/ref=sr_1_1?ie=UTF8&qid=1382500435&sr=8-1&keywords=ultra+pro+binder

I use these Stanely 25 compartment cases:
https://www.amazon.com/Stanley-25-Removable-Compartment-Professional-Organizer/dp/B00005QWYF

To protect the ships a little more, I either line the compartments with craft foam, or use extra foam from pick and pluck. It manage to keep my ship pretty secure even while moving, or if I flip the case upside down. I really like the modularity, and the combo of a rigid shell + foam.

I also use the 10 compartment ones for larger ships (and eventually, Armada).


Edit: the 25 bin ones are much cheaper ordered via Home Depot. For some ships, I also re-use the original plastic and just trim it down to fit a compartment.

I used paint markers on the whole model, except the insides of the thrusters, which were too hard to reach.


To do the thrusters, I had some leftover minwax polyshade, which I diluted with the last of my paint thinner and dipped the thrusters in. It didn't leave a thick enough coat, so I made it stronger. In the process I made it too strong, which led to all of the details on the ship being obscured by thick black paint! Looking up on the shelf in front of the sink, I saw some of my beloved's super nail polish remover. I grabbed that and a toothbrush, and was able to thin the thick coat. I then spread some across the whole model to give it that "weathered" appearance.


IMHO, it matches up well with the Y-Wings I did a few weeks ago.


Markers; https://www.amazon.ca/Allnice-Acrylic-Colours-Metallic-Painting/dp/B07J52NY2D/ref=sr_1_6?keywords=metallic+paint+markers&qid=1572317493&sr=8-6 (fine tip acrylic markers for large surface areas) and https://www.amazon.ca/WOWENWO-Metallic-Permanent-Assorted-Coloring/dp/B078Y29BSL/ref=sxin_4_sxwds-bia-wc2_0?keywords=metallic+paint+markers&pd_rd_i=B078Y29BSL&pd_rd_r=3deb019f-0cff-47c3-ba58-72d330d1a1cb&pd_rd_w=1Xj6r&pd_rd_wg=S5Ylw&pf_rd_p=2fe1ce4e-5e90-4cf0-822c-b567905c9e3d&pf_rd_r=53N4D6Z3C33FZWPMN29C&psc=1&qid=1572317493 (a tad more precise since they have a felt brush tip).


You can buy minwax polyshade and paint thinner at at hardware store, nail polish remover from a dollar store or whenever.

apologies for the shitty-length link, but this tackle-box works rather perfectly to hold most of a current collection. I highly recomend it.

It will of course, not hold the Raider, Tantive, etc, but any of the large ships fit just fine



http://www.amazon.com/Plano-1374-4-By-System-Tackle/dp/B000E3FKTO%3FSubscriptionId%3DAKIAILSHYYTFIVPWUY6Q%26tag%3Dduckduckgo-ffsb-20%26linkCode%3Dxm2%26camp%3D2025%26creative%3D165953%26creativeASIN%3DB000E3FKTO

I use the Stanley 014710H and 014725M boxes, depending on the size of the ship. It's a bit pricier than the individual Plano boxes you can find, but it's sturdy and I haven't found a ship that doesn't fit in one of the two sizes. The compartments are removable and you can mix-and-match them, so they're pretty versatile. They stack nicely, as well.

​

Some example pics here. Dials and base tokens are stored with the ships unless they don't fit in the same compartment. When that happens they are still in the same box, just a "general" compartment. I even stored the cards in them until all my 2.0 conversions meant I had way too many cards to easily find that way and I switched to binders.

​

EDIT: For some extra clarification, I have one of each 1.0 ship (plus a second IG-2000 and the Aces packs, etc.) plus Lando's Falcon and a 2.0 core. All of that converted over to 2.0 with the kits fits in 5 of the thinner 25-compartment cases and 2 of the larger 10-compartment ones. Obviously the amount you need will depend on how many ships you have and whether you feel the need to separate them by faction like I do, but it's not a bad storage solution, if I say so myself.

here is a link to the ones I bought https://www.amazon.com/gp/product/B002KDNAU2/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

they are in a binder, and I have turned the binder upside down and did not have a problem with them falling out as they do fit nicely in the pockets and to get them out you have to push them up from the bottom of the pocket as you can not easily reach in the pocket and pull them out.

​

as for the size, you need to make sure the pocket size is a little bit over 2 inches as the dials are 2 inches wide. the ones linked are an excellent size. plus 20 pages for $6 is not bad.

I use these (https://www.amazon.com/BCW-20-Pocket-Pages-Pocket-Size/dp/B002KDNAU2/ref=sr_1_1?ie=UTF8&qid=1480413260&sr=8-1&keywords=coin+collector+pages) for both dials and bases and like it very much.

It makes it a lot easier to find the stuff you need.

It's relatively easy to put things in and take them out. The one caveat is that it's sometimes too easy for parts to fall out. As long as you store your binder and travel with it upright things should be fine.

Nice work!

Just throwing in another option for anyone reading this thread: An extra wide yoga mat can work too.

Pros: Can get an epic size mat w/o a seam (or 2 3x3 mats out of it). It has a better grip than the offical mats. Pretty cheap if you find a buddy to split one with you.

Cons: Kind of bulky to haul around with you. It's a bit soft, spongy, and bumpy. Not sure how well stars painted on it will stick.

Save for the epic ships, I essentially have a very similar number/distribution of ships as you. I use the Plano 5231. One for the rebels and one for the empire. It does a good job of holding all the small ship, cards, and maneuver dials in the bottom. And the top works well for all the small focus/evades/TLs and such on the top. The only problem I have with it is the storage of the larger ships. I can only seem to fit one YT-1300 in for the rebels, and one firespray plus lambda for the empire. Over all for the price I am happy with them, and there is still room for small ships. I just need to figure out something for larger ships

So I can't stop promoting this box: https://www.amazon.com/Stanley-25-Removable-Compartment-Professional-Organizer/dp/B00005QWYF/ref=sr_1_1?ie=UTF8&qid=1497653887&sr=8-1&keywords=stanley+25+compartment+organizer

It is the perfect size to hold everything you need for a game, plus two small-ship lists + the cards/bases/everything you need. I always sleeve my cards, so what I usually do is prior to heading to play, I create my list, and place the upgrade cards along with the pilot sleeve. That way I can quickly pull them out and set them up.

TLDR: have a "go box" that has the tokens/stuff you need to play + 1-2 lists' worth of cards/ships.

I've found the Stanley 25 Bin case to work extremely well. You can use foam to help hold the ships in or just cut the plastic they come in and stick them in the bins. It holds everything in really well and you can easily see what's inside due to the clear top. I'm about to order a third one for my impulse buy from the Mianiature Market sale.

I haven't figured out how to post pictures yet, but here is the link to the coin sleeves. They are perfect for small bases and dials. highly recommend them!

https://www.amazon.com/BCW-Vinyl-Pocket-Pages-Thumb/dp/B002ZUI8PM/ref=pd_yo_rr_bia_t_4?_encoding=UTF8&psc=1&refRID=59JCZGT0TMYWWFJ4P1JM

The good 'ol trusty Plano 5231 is $10 at Lowe's/Menard's/Amazon/K-Mart. I also have 3 of the double version (basically two of them plastered together) for each faction and it fits a good majority of my ships and I've been playing since Wave 1.

Yoga mat. Amazon

It's nice and grippy (much better than the wood table top we were playing on). Also, the mat is big enough that you can make 2 play surfaces out of it.

What did you just do, buy 4 starter sets and the 2 big ships from wave 2?

If purchased new from Amazon, that would only be 158.94 before tax, but would include free shipping if purchased with Amazon Prime. You're STARTING the bidding for your used set $40 higher than the retail price, and then charging an additional $15 dollars for shipping on top of that.

Amazon.com Listings, (if you don't believe me):

• Starter Set $29.65 x 4 = $118.60
  
• Millennium Falcon $20.48
  
• Slave 1 $19.86
  
  ==================================
  
  
• Pre-Tax Total, brand new from Amazon: $158.94
  
  -----------------------------------
  Your asking price for used pieces should at least be somewhat lower than the price they could be purchased brand new.
  
  
  

The Plano 1364 trays are not deep enough to fit the ships on bases even if you lay them down, but the Plano 1374 tackle box most definitely is capable of doing that for almost all of the small ships.

It's the one I use. Plano 1374

I keep the models in a cardboard box with pluck-foam inserts, but for everything else I use one of these that was recommended by other folks for X-Wing, here it is in use. The compartment boxes have little feet that slot into divots on the case's base so with the lid closed they're effectively locked in position. There are other types with different compartments and depths as well, you can find them just as easily at any hardware store.

Now all I have to worry about is the pile of baggies that make it look like I'm cutting drugs to make rent.

Plano tackle boxes and the associated trays are pretty much the de-facto standard. Some people spring for foam, but almost everyone I know uses a plano tackle box.

I have this box: https://www.amazon.com/Plano-1374-Rack-System-Tackle/dp/B000E3FKTO/ref=sr_1_1?s=sporting-goods&ie=UTF8&qid=1473565059&sr=1-1&keywords=plano+1374

Beware: there's a very similar box that's like half the price, but it's also half the size. It doesn't work for X-Wing.

If that's overkill, get a couple of the trays that fit inside of it. There are assorted 3700-series trays with slots of difference sizes. You can see these in person at any outdoor store if you want to check sizes.

Stanley tool organizer. It literally fits X-Wing items perfectly and can be customized to your needs. I'm buying two more just in case... CHEAP on Amazon :)

http://www.amazon.com/Stanley-25-Removable-Compartment-Professional-Organizer/dp/B00005QWYF

I use these for ship dials: http://amzn.com/B002ZUI8PM They fit perfectly though I don't think the plastic dial upgrades would fit. There isn't must wiggle room.

I also have one of these in the folder section of the binder for all the other tokens: http://amzn.com/B000E39T50

edit I keep the plastic ship bases in with my battlefoam and maneuver templates in the back most folder up against the hard binder side to prevent them from getting bent.

You can look up "16Pocket Pages" on amazon and you'll get a ton of results there that show them using upgrade cards even. I bought some BCW ones and really like them. The cards fit nicely in there even when they have sleeves.

https://www.amazon.com/BCW-PRO-16-POCKET-PAGE-UPGRADES/dp/B018OM5MGC/ref=sr_1_1_a_it?ie=UTF8&qid=1521906902&sr=8-1&keywords=16+pocket+page

I use a side-loading card binder. Since upgrade cards are basically half-cards, you can stack two in a slot, but since it loads from the side as opposed to the top, it is much easier to remove the cards you want. It's on amazon here

I use a Plano 5231 for my tournament box.

http://www.amazon.com/Plano-Molding-5231-Organizer-Porsche/dp/B000HJ9514/ref=sr_1_4?ie=UTF8&qid=1425779123&sr=8-4&keywords=plano

2 Level Plano container has plenty of compartments up top for tokens, asteroids, damage decks galore. As well as flat ships like X-Wings etc, bottom level deep enough to hold YTs and Decimators with ease, as well as pilot cards, loadouts, and taller ships, like Ties and B-Wings

To be honest, that picture was taken when I was only about 2 months in. I wouldn't be able to fit all my full dials in a binder with my collection now, so I use the upgraded dials and only keep the maneuvers half of the dial and the ship ID token in the pages with the bases. I have one of every ship and multiples of some, and can fit all 3 factions in 1 2" binder.

Edit: These are the pages I used.

These Ultra Pro sleeves? I have them and really like them, although I've never used the FFG ones, so I can't give you a comparison there. And there are 3 reviews on that Amazon page, all positive.

Plano 23750. Its durable and the containers inside are adjustable for whatever size and shape of token, obstacle, or ship you want to bring. I can safely pack 2 lists into it with enough tokens for everything. Your maneuver templates and range rulers fit like a breeze. Never had any reason to switch in 5 years and they're only $12 prime shipped on Amazon!

So the starter set with Poe Dameron is from 1st edition. You want the 2nd edition starter set which will have an x-wing (including Luke Skywalker) and a couple of TIEs. The second edition box has a black front, you can get it on Amazon or wherever just by searching x-wing 2nd edition.


Or just use this link:
https://www.amazon.com/Star-Wars-X-Wing-Second-Core/dp/B07CSC5NGH/ref=mp_s_a_1_1?keywords=x-wing+2.0&qid=1568991741&sprefix=x-wing&sr=8-1



That's enough to play a basic version of the game, and from there you can buy the expansions for the faction that you think looks fun!

I use this

https://www.amazon.com/Plano-Molding-5231-Organizer-Porsche/dp/B000HJ9514

And multiple of these

https://www.homedepot.ca/en/home/p.2-pack-interlocking-organizer.1000817742.html

Works really well and very cheap. Just got the plano and its perfect for holding all tokens in the top.

You can tell this is the correct one because under the "also purchased" is x-wing stuff.

https://www.amazon.com/Plano-Molding-5231-Organizer-Porsche/dp/B000HJ9514/ref=sr_1_6?s=hi&ie=UTF8&qid=1537967313&sr=1-6&keywords=plano

I'm mostly a one of each ship person (minus the swarm ships, like i have 8 tie's and 8 Z-95's) and have one of these for each faction. They hold plenty of small based ships and can handle some of the smaller large based ships. Other than not having enough storage for the large ships I have no issues with it.

It's a little large to bring everything to game days, but it was cheap and customizable and works great.

Near the end of the album I show my cards stored in two binders, one larger one for the ship cards and a smaller one with small sleeves that perfectly fit the upgrade cards.

http://www.amazon.com/Ultra-Pro-PRO-BINDER-Leatherette-Sideloading/dp/B004FVJDV2

http://www.miniaturemarket.com/catalog/product/view/id/49023/s/ugd010475/

There's a couple of options, like the Bosch ones:

https://www.amazon.com/dp/B00BD5G61S/ref=psdc_15709201_t1_B00BD5G622

https://www.amazon.com/Bosch-i-Boxx72-10-Click-Storage-System/dp/B00BD5G622


or Stanley:
https://www.amazon.com/Stanley-Fatmax-FMST14820-FatMax-Organizer/dp/B008J2IQ34/ref=sr_1_2?s=hi&ie=UTF8&qid=1501065568&sr=1-2&keywords=stanley+deep+cup

https://www.amazon.com/Stanley-25-Removable-Compartment-Professional-Organizer/dp/B00005QWYF/ref=sr_1_3?ie=UTF8&qid=1501065696&sr=8-3&keywords=screw+box

The OP's example seems to be from B&Q (google's amazing some times)

http://www.diy.com/departments/20-compartment-tool-organiser/1345784_BQ.prd

An extra wide yoga mat works great as a play surface. I don't know if you can find anything with more grip. Link.

I have this and it's awesome to play on.

https://www.amazon.com/dp/B002PA1KWK/ref=cm_sw_r_cp_apap_YfKs8vGLsfShL

If you can't find it local, the Core set is on Amazon for $29.

The Falcon and Slave 1 should come back around to store soon i hope. They've been out of stock for months now. The FF website says Q1 2015 for a reprint of them.

here are some on amazon, i use them for dials and small ship tiles

these pages in general are made of a stiffer plastic not soft like ultra pro pages

but before using they can be "loosened up" and work great

I bought this case from Amazon and I'm going to get some foam like you have to line in. Fairly cheap and really good for carrying stuff.

Stanley 014725 25-Removable Compartment Professional Organizer https://www.amazon.com/dp/B00005QWYF/ref=cm_sw_r_cp_awd_4XtIwbQM5SVPX

I love this one as well. I knew I was going to need a lot more space so I bought the double. I have since bought a second double. http://www.amazon.com/Plano-Double-Cover-Tackle-Organizer/dp/B001ECQPVQ/ref=sr_1_3?ie=UTF8&qid=1419801622&sr=8-3&keywords=double+plano

You can get sheets made for coin collections that are perfect. 2-inch squares, like this one: https://www.amazon.com/gp/product/B002KDNAU2/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Amazon here! Best part is it comes with x4 Plano 3700 + dividers at a very reasonable price.

http://www.amazon.com/Plano-1374-4-By-System-Tackle/dp/B000E3FKTO

This will more than fit your collection. You can fit both large ships ( tantive and transport) up top and a full fleet in each tray.

I use these: https://www.amazon.com/gp/product/B002KDNAU2/ref=oh_aui_detailpage_o06_s01?ie=UTF8&psc=1

and these for large ships: https://www.amazon.com/gp/product/B004QVH0RK/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

They aren't quite as tight as I would like but they don't fall out if I invert the binder. It works nicely for me.

yeah, that's the first edition kit then. There were two core sets released.

​

From what it sounds like, you have https://www.amazon.ca/Star-Wars-X-Wing-Force-Awakens/dp/B014TKHEPA/ref=sr_1_2?keywords=x-wing+core+set&qid=1574973857&sr=8-2

​

When you need https://www.amazon.ca/Star-Wars-X-Wing-Second-Core/dp/B07CSC5NGH/ref=sr_1_1?keywords=x-wing+core+set&qid=1574973857&sr=8-1

Amazon has great stock for this game. €39.95 + €3.99 shipping for the Core Box. Why doesn't everybody check Amazon first? :D

These are coin sleeves repurposed for X-Wing. A good substitute for sure!

BCW Pro 20-Pocket Pages, Pocket Size: 2" x2", 20 Pages - Coin Collecting Supplies https://www.amazon.com/dp/B002KDNAU2/ref=cm_sw_r_cp_apa_i_9Lg9AbH7NFRZ4

If you plan to collect most/every ship from all 3 factions and multiples of each, one of the more popular choices is Plano 1374. Its versatile, you'll grow into it, and fairly inexpensive for what it offers.
I just recently retired one and now that I'm at 111 standard play ships (+ the 5 epics in their own case), I'm using this https://imgur.com/a/lNyjw

polaroid photo albums are great for storing the upgrade cards.
http://www.amazon.com/Fuji-Instax-Polaroid-Instant-Cameras/dp/B008GYHV90/ref=sr_1_14?ie=UTF8&qid=1409915535&sr=8-14&keywords=polaroid+photo+album

either those or side loading ultra pro card albums (which i personally use)

http://www.amazon.com/Ultra-Pro-PRO-BINDER-Leatherette-Sideloading/dp/B004FVJDV2/ref=sr_1_3?srs=2602911011&ie=UTF8



edit: added links

Question for you. Is there a reason your stuff has to be on "trays" or something similar for tournaments? Or could one use something like [this] (http://www.amazon.com/Plano-StowAway-Organizer-Adjustable-Compartments/dp/B007UTNREK/ref=sr_1_3?ie=UTF8&qid=1450477702&sr=8-3&keywords=plano+3750)? I have yet to go to any tournaments but I was thinking about starting soon and want to know if I bring one of those with my stuff in it, if I will be fine?

I only have about 30 or so ships, but I use two Plano 5231 cases. One for IMPs one for Rebels, and scum intermittently. I also have a plastic keter toolbox for the large ships.

Lots of people like Plano's stuff. Without getting something custom (read: expensive) you could try one of Plano's bigger chests, like the 732 tackle box.

Got a plano 5231. It's nice for all of the tokens and whatnot. Can also fit a larger ship or two if you wanted.

It's this thing.

The BCW heavy vinyl 2" coin pocket sheets work really well, the polypropylene is not stuff enough to keep them from falling out, but the heavy vinyl does a good job keeping them in. I use these:
https://www.amazon.com/gp/aw/d/B002ZUI8PM/

It's currently $23 on Amazon

As I said in a previous post, I got it for $18 over Black Friday weekend, so it does get cheaper, but that's still a great price for what you get. Those two TIE/fo alone would cost you $24-28 if purchased separately in the TIE/fo expansion (granted, you get different pilots and upgrades in the expansion, but still).

https://www.amazon.co.uk/gp/aw/d/B00005QWYF/

I'm using this currently, works like a charm. Here's a pic in action

http://i.imgur.com/rxUyshIh.jpg

I have a decent sized collection, and either stuff a lot of models in here, or less models but pack their cards in too. Check out BBQ for cheaper and more varied alternatives.

I usually use foam to carry models, but X Wing models are sturdy enough to be alright.

Once you start buying... Anything else, I would pick up 1 or 2 of these bad boys. https://www.amazon.com/Stanley-25-Removable-Compartment-Professional-Organizer/dp/B00005QWYF

I'm not a pro xwing player, but the storage is so danged convenient. In some ways, it enables me even more because there are bins that "need to be filled."

Happy to hear of another new player!

£25.42 on Amazon with free shipping. You may find it cheaper elsewhere.

http://www.amazon.co.uk/gp/product/1616613769/ref=s9_simh_gw_p14_d8_i2?pf_rd_m=A3P5ROKL5A1OLE&pf_rd_s=center-2&pf_rd_r=1NM7N07CC285ECRCE6X4&pf_rd_t=101&pf_rd_p=455344027&pf_rd_i=468294

I like this one for portable needs not storage.

http://www.amazon.com/gp/product/B000HJ9514/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

it has two separate cases you can fit all your dice and tokens in the upper level. The second level has enough room for the large ships and lots of small slots for many small ships. I have not tried the Decimator in it yet so not sure about that.

it's $38 on amazon - and free shipping if you have prime http://www.amazon.com/Plano-Molding-728-000-Angled-Tackle/dp/B006PKXVAA/ref=sr_1_1?ie=UTF8&qid=1425395304&sr=8-1

Here's my current set up. (Amazon links for everything)

The binder I'm using I have cards on one side, with the dials and base tokens on the other side. My one and only issue with it is that I'm nearly at capacity. Functionally it's great.

Small cards

Big cards

Dials, and base tokens

Movable tabs (I cut them in half)

Edit: [Here's a picture of how I have it set up] (http://i.imgur.com/wdvYQM7.jpg)

One idea I saw and loved are the plastic binder pages for coin collectors

http://www.amazon.com/BCW-20-Pocket-Pages-Pocket-Size/dp/B002KDNAU2

One more thing is to get a good storage system with room to grow. Yes you can find some cheap containers to hold a few ships and tokens, but once your collection grows you'll be lugging around 5 or 6 containers.

Plano tackle boxes aren't too expensive and hold everything with room for more. I started out big with the 1374 and still have room after getting all the ships with duplicates.

http://www.amazon.com/Plano-1374-4-By-System-Tackle/dp/B000E3FKTO/ref=sr_1_1?ie=UTF8&qid=1419003888&sr=8-1&keywords=plano+1374

EDIT: Maybe wait for it to go on sale or shop around. It was only $32 on Amazon when I ordered mine a few months ago.

I keep my cards and pilot bases in binders:

• Pilots: https://www.amazon.com/gp/product/B002XH8DV6/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
  
  
• Upgrades: https://www.amazon.com/gp/product/B018OM5MGC/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1
  
  
• Small bases: https://www.amazon.com/BCW-20-Pocket-Pages-Pocket-Size/dp/B002KDNAU2/ref=sr_1_1?s=toys-and-games&ie=UTF8&qid=1479145791&sr=1-1&keywords=bcw+coin
  
  
• Large bases: https://www.amazon.com/gp/product/B00DDTQFN6/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1
  
  The ships I actually keep on their bases and pegs, using the ID token holders on the bases to hold the chit for the maneuver dial and the actual maneuver dial (I'm using the dial upgrades: https://www.fantasyflightgames.com/en/products/x-wing/products/imperial-maneuver-dial-upgrade-kit/). That way, when I want to fly a ship, I can just grab it off the shelf and I've already got the maneuver dial and the chit ready to go.

Amazon had the first edition box at $55-ish last night when I was browsing. Not a bad deal if you have the conversion kit for the Empire already for the TIE X1 and don’t mind getting a huge ship conversion.

EDIT: It doesn’t show up on Amazon’s internal search, only on Google.

When you run out of room, upgrade to the Plano 5231. Perfect case for this game.

Edit: Here's a link to a post with the 5231
http://www.reddit.com/r/XWingTMG/comments/1bimbb/wish_i_had_thought_of_this_when_i_got_my_other/

And the case itself
http://www.amazon.com/Plano-Molding-5231-Double-Organizer/dp/B000HJ9514/ref=sr_1_1?ie=UTF8&qid=1368050052&sr=8-1&keywords=plano+5231

[–]Floridarainmaker [score hidden] 3 minutes ago

This is apparently a second account maybe Imgur created for me?dunno.

How do I edit my original post?
Common questions: Acrylic paint. Plano tackle box. https://www.amazon.com/Plano-1374-Rack-System-Tackle/dp/B000E3FKTO Here is an early pic of all of it. https://imgur.com/gallery/kY5ug

The Plano 5231 is very popular. Here you can see it in use. Note: I've added 2 Z-95's, 1 Phantom and 1 Defender and it all still fits.

Are you going to buy more ships? If so, you may as well go with the most popular solution, the Plano 3952: http://www.amazon.com/Plano-Double-Cover-Tackle-Organizer/dp/B001ECQPVQ

I have a small box for tournaments, but it's no good for long-term storage of all of my ships. I've actually just bought a second 3952 so I can have one for Rebels and one for Empire, with Wave 4 coming this summer and some recent additions to my collection to get up to 4 each of the small-base ships.

Depending on your collection this fits everything and I have one of every ship minus a few epics.

https://www.amazon.com/gp/product/B000E3FKTO/ref=oh_aui_detailpage_o06_s01?ie=UTF8&psc=1

Im also making the jump to dial covers and am using a dowel rod with a stopper to hold the dials from each faction. Was inspired by a buddy of mines.

I ordered a yoga mat and cut it in half, to make two 36"x36" mats that work pretty well

Lol, yah I'm on my third box also.

Let me guess, was this box #2?

http://www.amazon.com/gp/product/B000HJ9514/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1

I use 2"x2" coin holder pages in my binder, they will fit both halves inside each pocket. I leave the dials separated so that when I put one into one of those schmancy new plastic dials, the top half with the label is left behind to remind me where it came from, and I can always look at the back to match the numbers if needed.

http://www.amazon.com/dp/B002KDNAU2/

https://www.amazon.com/gp/product/B007MTWI48/

Best surface, no-slip. Cut it in half for 2 or keep it big for epic.

I’ve always really liked the Stanley storage units:

Stanley 014725 25-Removable Compartment Professional Organizer https://www.amazon.com/dp/B00005QWYF/ref=cm_sw_r_cp_api_NG3QBbBJF1XYS

In all seriousness, the deal on the Imperial Raider is pretty good.

Honestly, for cards (both upgrade and pilot) I have everything sorted in a huge binder. That being said we're hitting critical mass and gonna have to start carrying two binders- one for Pilots and one for Upgrades.

Also, wanting to upgrade to the Upgrade Dial Kits we're running into how to organize the dials and chits; what I'm wanting to do with these is put them all in Coin Sleeves: https://www.amazon.com/BCW-20-Pocket-Pages-Pocket-Size/dp/B002KDNAU2/ref=pd_bxgy_200_img_2?ie=UTF8&psc=1&refRID=TTCSJNXYNHCZQHA2AGCQ

Yep, got it from Amazon. It's $10

http://www.amazon.com/Plano-Molding-5231-Organizer-Porsche/dp/B000HJ9514

I see X-wing Core sets for $24 USD on amazon (MSRP $40), which is decent:
https://www.amazon.com/Star-Wars-Awakens-X-Wing-Miniatures/dp/B014TKHEPA/

and the Ghost for $35 (MSRP $50) which is also not bad. Little cheaper than normal.

Coolstuffinc has their regular markdowns, but yeah black friday is not really any different than most days in regards to X-wing

I use this for Pilot Cards and all the Upgrades.

https://smile.amazon.com/Case-Zipper-D-Ring-Binder-DUAL-101-BLU/dp/B000SE0TA4/ref=sr_1_1?ie=UTF8&qid=1503626789&sr=8-1&keywords=double+zippered+binder

I use 3x3 Brown, Grey, Red for the pilots - https://smile.amazon.com/18-Pocket-Pages-Side-Loading-Petrol-Card/dp/B01LYI0DEL/ref=sr_1_fkmr0_4?ie=UTF8&qid=1503627117&sr=8-4-fkmr0&keywords=18+pocket+ultraguard+binder+sleeves+standard+card


and the 4x4 for the upgrades.

https://smile.amazon.com/Ultra-Platinum-Pocket-American-Cards/dp/B01ARJ9AT0/ref=sr_1_fkmr1_2?ie=UTF8&qid=1503628214&sr=8-2-fkmr1&keywords=ultra+pro+16+pocket+binder+sleeve

This works well for me, and I keep all my Game night stuff in a box by Crafted Storage ( Asteroids, Deck, builds and ships etc )

-R

Cases. They're Stanley tool cases and are perfect for all but the big ships, as you can see

Here's a random link to the first google result so you can see the part number and if they're available cheaply where you are.
https://www.amazon.com/Stanley-25-Removable-Compartment-Professional-Organizer/dp/B00005QWYF/ref=sr_1_1?ie=UTF8&qid=1527185306&sr=8-1&keywords=stanley+25+compartment

Plano Molding 5231 Double Cover Stow N Go Organizer, Porsche Red https://www.amazon.com/dp/B000HJ9514/ref=cm_sw_r_cp_api_p6cpxb4BSG38Q

This seems to be an inexpensive and popular choice. It's what I we with when starting a collection.

Sorry, I was thinking of a different box. I was thinking of this.

This is what I use, and I love it. You can get it for $40 at Wal-Mart. I'm actually going to be posting my storage setup tonight. I don't know if it actually gets you too much more space than what you have though. The one other piece of advice I do have is to not be afraid to cut some plastic.

I tried felt prior to shelling out the cash for an official playmat. I thought it would work out well but in practice the small fibers of the felt kept grabbing the ship's bases when I tried to move them which then jerked the whole mat and shook everything around. Also it didn't like to sit flat without a good deal of effort. Ultimately I had to be very cautious in making any movements which slowed down the game and detracted from the experience.

Maybe a higher quality felt would work better, but I would not recommend it. I've seen this recommended around here before, you can cut out two playmats and get a nice grippy mats with enough space for epic play as well

Here is what I bought for the upgrade cards:

Ultra PRO Platinum 16 Pocket Platinum Mini American Cards, 41mm x 63mm, Clear
https://www.amazon.com/dp/B01ARJ9AT0/ref=cm_sw_r_cp_api_cznIxbB8TX3CQ

And this is what I bought for the Pilot cards:

Ultra Pro 9-Pocket Trading Card Pages - Platinum Series (100 Pages) https://www.amazon.com/dp/B00095M5DQ/ref=cm_sw_r_cp_api_4znIxb6VJQJE9

It looks like the same as mine which is this one
https://www.amazon.com/Plano-1374-Rack-System-Tackle/dp/B000E3FKTO

I personally like the Plano 1374

https://www.amazon.com/Plano-1374-Rack-System-Tackle/dp/B000E3FKTO/ref=sr_1_1?s=sporting-goods&ie=UTF8&qid=1481055874&sr=1-1&keywords=plano+1374

I believe it's this one, which are what I use as well: http://www.amazon.com/Stanley-25-Removable-Compartment-Professional-Organizer/dp/B00005QWYF/ref=sr_1_1?ie=UTF8&qid=1452503344&sr=8-1&keywords=stanley+case

Until your collection grows, one or two of these will serve you well. I use two currently and strap them together using suitcase straps.

https://www.amazon.com/Plano-Molding-5231-Organizer-Porsche/dp/B000HJ9514/ref=sr_1_3?ie=UTF8&qid=1466958793&sr=8-3&keywords=plano

I bought this one. Works well.

Yoga Direct Extra Wide Yoga Mat, Black https://www.amazon.com/dp/B007MTWI48/

https://www.amazon.com/BCW-20-Pocket-Pages-Pocket-Size/dp/B002KDNAU2/ref=pd_ybh_a_2?_encoding=UTF8&psc=1&refRID=Z8353KBPMSHNZKNVZBJ5 Someone posted these in another thread. Looked solid.

1 left in stock on amazon http://www.amazon.com/Star-Wars-X-Wing-Miniatures-Game/dp/1616613769/ref=sr_1_1?s=toys-and-games&ie=UTF8&qid=1412796439&sr=1-1&keywords=star+wars+x-wing+miniatures+game

You can get it for £25.52 shipped on Amazon UK, and it is 29 in my FLGS.

Since I have prime, I got this off amazon.

Looks to be the same thing, just made by Stanley.

Most 24x72 (2ftx6ft) yoga mats are about 15 dollars on amazon.
The 36x72 (2ftx6ft) yoga mats are about 25 dollars.
36x72x.2 Inche yoga mat

TFA Core set is $15 right now on Amazon btw

https://www.amazon.com/dp/B014TKHEPA/ref=cm_sw_r_cp_apa_YUDmybXFZTGMF

It's $20 on Amazon right now

https://www.amazon.com/Star-Wars-Awakens-X-Wing-Miniatures/dp/B014TKHEPA

https://www.amazon.com/Stanley-25-Removable-Compartment-Professional-Organizer/dp/B00005QWYF

Stanley 25-removable compartment organizer. For the price of 1x foam Feldherr bag, I can buy 5 or 6 of these (they go on sale from time to time for $10-$11) and store damn near my entire fleet to include tokens, base, pegs, etc. Big ships and Epic ships may need a deeper Stanley case, the price of which is still comparable with the 25-compartment.

I found foam to be largely unnecessary, unless you plan on throwing your collection down a flight of stairs. I've moved a couple of times and my ships survived undamaged using the Stanley cases.

I used this box: http://www.amazon.com/Plano-Double-Cover-Tackle-Organizer/dp/B001ECQPVQ/ref=sr_1_3?ie=UTF8&qid=1450236005&sr=8-3&keywords=plano+x+wing+box

But you can use any box really. It is just slightly bigger than the cards. The cards are sideways no vertical.

And I don't know how to link a pdf file on reddit. Lol this is the first time I am posting a file here.

I picked up a pair of Mead zipper 3 ring binders and a Stanley toolbox on Amazon and redid my storage tonight.

Binders
https://www.amazon.com/gp/aw/d/B00COHAM2S/

Tool box
https://www.amazon.com/gp/aw/d/B00005QWYF/

This fits my whole collection, minus the large ships, which I still haven't found a solution for. I might grab a deeper Stanley box.

Here you go.

http://www.amazon.com/Star-Wars-X-Wing-Miniatures-Game/dp/1616613769/ref=sr_1_1?ie=UTF8&qid=1411245898&sr=8-1&keywords=xwing

I use these for the small ships, I just cut out the plastic clamshell the ships come in to act as a buffer and hold them in place in the compartments.

https://www.amazon.com/dp/B00005QWYF/?coliid=IQZHDYF0JJ4UF&colid=19E74RNJJGU8A&psc=1&ref_=lv_ov_lig_dp_it

The 10 compartment version works well for the epic/large ships.

http://www.amazon.com/Stanley-25-Removable-Compartment-Professional-Organizer/dp/B00005QWYF/ref=sr_1_1?ie=UTF8&qid=1463591781&sr=8-1&keywords=stanley+organizer

I literally carried a handful of b-wings into the store in the front pocket of a hoodie after having them in my car's cupholder all day.


Then I bought some Stanley's.

These work for me:

Stanley 014725 25-Removable Compartment Professional Organizer https://www.amazon.com/dp/B00005QWYF/ref=cm_sw_r_cp_api_p0Y9BbEM3MQDA

For storage I use a combination of stuff.

Ships, tokens, plastic bases, stands, etc are stored in Stanley Organizers, while the ship dials and pilot base plates are stored in 2x2 coin boxes. Lastly the pilot/upgrade cards are stored in standard 800 or 1000 count cardboard storage boxes.

http://www.amazon.com/Stanley-25-Removable-Compartment-Professional-Organizer/dp/B00005QWYF/ref=sr_1_1?ie=UTF8&qid=1396103879&sr=8-1&keywords=Stanley+Tools+25+Compartment+Organizer

It’s a Stanley professional organizer! Here’s the link

For my ships, I use Stanley organizer boxes, mostly https://www.amazon.com/dp/B00005QWYF/ for small and large ships and https://www.amazon.com/dp/B001G1CUK0/ for epic ships and a few of the bigger large ones such as the Decimator.

How do I edit my post?

Common questions:
Acrylic paint.
Plano tackle box. https://www.amazon.com/Plano-1374-Rack-System-Tackle/dp/B000E3FKTO
Here is an early pic of all of it.
https://imgur.com/gallery/kY5ug

I use the Plan 1374 - http://smile.amazon.com/Plano-1374-Rack-System-Tackle/dp/B000E3FKTO?ie=UTF8&psc=1&redirect=true&ref_=ox_sc_sfl_title_12&smid=A2I4D0WO1JEMBA

http://www.amazon.com/Plano-1374-4-By-System-Tackle/dp/B000E3FKTO

this will last you a long, long time

Check out this post:
https://www.reddit.com/r/XWingTMG/comments/3qf3ni/storage_solutions_for_the_wiki/?ref=share&ref_source=link



I use a tackle box with Willli's Micro hangers:
http://www.sirwillibald.com/

These Plano boxes are very common (and on clearance): https://amzn.com/B000HJ9514

I use Plano Molding 5231 Double Cover Stow N Go Organizer, Porsche Red https://www.amazon.com/dp/B000HJ9514/ref=cm_sw_r_cp_awd_hR5NwbJVH6QRV

http://imgur.com/OGR2PPD
http://imgur.com/3jQxDcX
http://imgur.com/FYPKNXc

Do you mean this plano? https://www.amazon.com/Plano-Molding-5231-Organizer-Porsche/dp/B000HJ9514/ref=pd_rhf_schuc_p_img_6?_encoding=UTF8&psc=1&refRID=DJD54KJNEYTR97QFSJS9

You do have a problem...

It doesn't appear you have a case for them ;D

(I use these http://www.amazon.com/gp/product/B000HJ9514?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00 but you have bigger ships than I)

Here are some links for the product in the above comment for different countries:

Link: http://www.amazon.com/Plano-Double-Cover-Tackle-Organizer/dp/B001ECQPVQ


|Country|Link|
|:-----------|:------------|
|UK|amazon.co.uk|
|Japan|amazon.co.jp|
|Canada|amazon.ca|




This bot is currently in testing so let me know what you think by voting (or commenting).

The dials are assembled, I would take a picture but I am at work now. I bought these: BCW Pro 20-Pocket Pages, Pocket Size: 2" x2", 20 Pages - Coin Collecting Supplies https://www.amazon.com/dp/B002KDNAU2/ref=cm_sw_r_cp_apa_JY2Hyb19HFYSA

Yoga Direct Extra Wide Yoga Mat, Black https://www.amazon.com/dp/B007MTWI48/ref=cm_sw_r_cp_apa_f9u1AbEMSFF77

Here you go.

Yoga Direct Extra Wide Yoga Mat, Black https://www.amazon.com/dp/B007MTWI48/ref=cm_sw_r_awd_9JtHub0323YV1

https://www.amazon.com/Star-Wars-Awakens-X-Wing-Miniatures/dp/B014TKHEPA

TFA Core Set is also $21.08

TFA core set on sale now for $15
https://www.amazon.com/Star-Wars-Awakens-X-Wing-Miniatures/dp/B014TKHEPA/ref=sr_1_1?rps=1&ie=UTF8&qid=1479653971&sr=8-1&keywords=star+wars+x-wing+miniatures+game&refinements=p_89%3AFantasy+Flight+Games%2Cp_n_condition-type%3A6461716011%2Cp_85%3A2470955011

I just use a normal Binder and separate them by Upgrade Type

https://www.amazon.com/dp/B018OM5MGC/_encoding=UTF8?coliid=I17K5ITZXIQ122&colid=3V0CFCMZ1V3JC

If you're talking about the plastics - I just keep them with their ships. I have some extras (from having bought colored sets) that I keep in a drawer.

If you mean the cardboards I put the large cardboard in these: https://www.amazon.com/gp/product/B003AOG42Q/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

and the small cardboards in these: https://www.amazon.com/gp/product/B018OM5MGC/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

So there's this and [this] (http://www.amazon.com/Ultra-Platinum-Pocket-American-Cards/dp/B01ARJ9AT0/ref=sr_1_2?ie=UTF8&qid=1465112061&sr=8-2&keywords=mini+american+card)

I already have my boxes (these ones $11 from Amazon) or I'd give the ones from the OP a try. Five bucks is hard to pass up and I feel these minis are a bit fragile for me to want to transport with pegs inserted anyway.

Not as good of quality but these are what I'm using: https://www.amazon.com/gp/aw/d/B018OM5MGC/ref=mp_s_a_1_1?ie=UTF8&qid=1502164999&sr=8-1&pi=AC_SX236_SY340_FMwebp_QL65&keywords=bcw+pro+16-pocket+page+-+topload+-+%2820+ct.+pack&dpPl=1&dpID=41QnoY4xaIL&ref=plSrch

I use a Plano for all my stuff, I think it's this model:
https://www.amazon.com/Plano-Molding-5231-Organizer-Porsche/dp/B000HJ9514/ref=sr_1_1?ie=UTF8&qid=1469025237&sr=8-1&keywords=plano+5231

In the top compartment I keep all my tokens, dice, pegs, and templates - stuff like that. You can put some small ships in here too, I just don't yet. There are a couple of slightly bigger compartments in the top section that hold my asteroids and damage deck.

In the bottom compartment is all my ships and I put my rulebook in there too. I've still got a good amount of empty space but once it starts filling up I'll migrate a few of the smaller ships into empty spaces on top. Overall it should hold quite a lot of small based ships. The one place it's weak is that there isn't much storage for big ships/bases unless you start cutting the dividers. And the cards share the divider space too. Eventually I'm thinking of migrating them to a thin binder with pocket pages but it's not necessary yet.

There are bigger stow n go models too.

When I was bringing more then a couple lists:
Plano Molding 5231 Double Cover Stow N Go Organizer, Porsche Red https://www.amazon.com/dp/B000HJ9514/ref=cm_sw_r_cp_apa_fBAKBb1S7HQ29

Nowadays I try to bring only one or two (oaky I can cram like 4 or 5 by stacking) and I use a Feldherr MINI PLUS Case for X-Wing Scum and Villainy, Star Ships and Slave 1 https://www.amazon.com/dp/B00VK4ZZD2/ref=cm_sw_r_cp_apa_OCAKBb16YEDT2

They were on sale for $18 a while back, my guess is they'll have new bags and foam out soon for 2e.

Yoga mat would work. http://www.amazon.com/dp/B007MTWI48/ref=wl_it_dp_o_pC_S_ttl?_encoding=UTF8&colid=1346YB5THR6F4&coliid=I2KBG6KXFX4S6Q

Cut it in half and you have two 3x3 mats. Lot of people use mats.