Best products from r/airsoftmarket
We found 23 comments on r/airsoftmarket discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 85 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Plano Single Scoped or Double Non-Scoped Rifle Case
- Plano gun cases: Protecting your passion since 1952
- Features this hard case feature a molded-in-handle and thick wall construction. The inserts are high density foam to offer excellent protection and the latches keep the case securely closed. This gun case is lockable and airline approved.
- Comfortable molded-in handle, thick wall construction, high density foam inserts, heavy-duty gun case latches
- Made in the USA
- Dimensions: 15.00 x 51.50 x 4.00 inches
Features:
2. Revision Military Prescription Rx Carrier And Connector System
Designed to attach securely and comfortably to a range of revision eyewear spectacle and goggle linesCompatible with sawfly spectacleCompatible with stinger hawk spectacleCompatible with Desert locust goggleCompatible with bullet ANT goggle
3. Condor Single Rifle Case (Tan, 36 x 12 x 3-Inch)
- - First Compartment: 36" long with two velcro strap to secure rifle. - Second Compartment: 26" long with two internal pocket for pistols, optics or other accessories.
- - Other Features: - Two mOlive Drabular Mag pouches - One mOlive Drabular Utility Pouch - 3/4" Padding - Import
Features:
4. TRUGLO Fiber-Optic Front and Rear Handgun Sights for Kimber 1911 Models with Fixed Rear Sight
Fiber-optics for the BRIGHTEST AIMING POINTS even in low-light conditionsTRI-DOT AIMING SYSTEM of contrasting front and rear colorsCONCEALED FIBER cannot be seen by target; SNAG RESISTANT DESIGN fits standard holstersFORTRESS FINISH COATING provides a permanent protective coating for maximum protect...
5. black ops 1911 scorpion metal co2 airsoft pistol airsoft gun(Airsoft Gun)
Suggested Use: Skirmishing, Caliber: 6mm, Velocity: 350Manufacturer: Black Ops, Airgun Mechanism: CO2Weight: 1.5, Fire Mode: Repeater, Warranty: 30-day limited warranty, Condition: New
6. NcSTAR Red Dot Sight TACTICAL RED DOT WITH 4 DIFFERENT RETICLES/BLACK
Made by NcStarRed Dot SightsHeads up display
7. Condor T and T Pouch (Tan)
-Fully opens with paracords to adjust-One internal sleeve, one zipper pocket, and multiple elastic keeper-External webbing for modular attachments
8. Plano 10470 Gun Guard SE Single Rifle Case
PLANO GUN CASES | Protecting your passion since 1952FEATURES | With a rugged look and solid protection for all sportsmen, this case carries a single rifle with high-mount 50mm scope. Gun Guard SE Series cases feature contoured recessed latches, padlock tabs for added security and rigid ribbed constr...
9. Soft Air Swiss Arms Airsoft Vertical Shoulder Holster
Universal design for most softair BB handgunsLightweight yet very toughComes with adjustable strapsMade from high durability cordura material
10. EOTECH 552 Holographic Weapon Sight
EOTECH 552.A65 - Holographic Weapon Sight in black with 68MOA ring & 1 MOA dot reticleNight Vision Compatible - Works with all Gen 1-3 night vision devicesMount - Compatible with both 1" Weaver and MIL-STD 1913 RailsWater Resistant - The 552 is water resistant to 33ft (10m)EOTECH HWS Prestige Warran...
11. DD DAGGER DEFENSE Dagger Defense four pack of keymod, single picatinny rail sections, aluminum, includes screws and tool for mounting,use for mounting accessories
12. AIM Sports .45 Degree Picatinny Rail Mount
- .45 degree picatinny rail mount
- .45 offset angle mount for red dots, flashlights & lasers
- Length is 2.1"
- N.W. (OZ): 1.9
- Features accepts all standard weaver tactical standard weaver tactical accessories
Features:
13. Twod Red Green Dot Sight 1x30mm/1x40mm Rifle Scope with 20mm Picatinny Weaver Mount Illuminated Reticle for Hunting
- Waterproof, shockproof, and fogproof.
- 1/4" MOA windage and elevation adjustments
- 3" eye relief with rubber fast-focus eye piece
- Multi-coated crystal lenses provide increased clarity even in low-light conditions
- Black anodized aluminum construction.
Features:
14. Feyachi Reflex Sight - Adjustable Reticle (4 Styles) Both Red and Green in one Sight!
- Reticle allows for 4 different styles. Dot, Circle/Dot, Crosshair/Dot, Crosshair/Circle/Dot combinations. All in one sight!
- A 33mm lens provides quick target acquisition. Wide field of view to maintain situational awareness.
- Very sturdy and secure rail mounting system. Will not come loose, made to last.
- Parallax corrected & unlimited eye-relief, where the dot goes, so does the bullet!
- Ultralight, waterproof and shockproof - Powered one 3V lithium battery (included).
Features:
15. Guard-Dogs Goggles, Evader 2 Matte Black (Clear w/FogStopper)
- Evader 2 Matte Black
- Interchangeable Lenses
- ANSI Z-87
- Great for Motorcycling, Airsoft, Tactical, Offroad
Features:
16. UTG MP5 Steel Claw Mount with STANAG to Picatinny Adaptor
- Robust Steel Construction with Precision Machining and Matte Black Finish to Ensure Great Zero Retention Capabilities
- Smooth and Rock Solid Quick Lock/Release Installation with Clear and Positive Operations
- High-profile with See-through Feature Allowing Use of Iron Sights
- Complete with Detachable Steel Picatinny Rail to Accept Complete Range of STANAG as well as Picatinny Applications
- This Mount is Designed for the H&K MP5 and Variants with Identical Receiver Specs. It May not be Compatible with Modified or Clone Models.
Features:
17. Pinty 4 MOA Red Green Dot Tactical Reflex Sight with Picatinny Cantilever Mount
Full metal construction. Precise windage and elevation adjustmentsCantilever PEPR mount fits any 20mm picatinny or weaver railQuick rail attachment design. Weatherproof and shockproofRed or green dual illuminated dot reticles with adjustable brightnessRemovable, spring loaded flip lens cover
18. Pinty 30mm Reflex Red Green Dot Sight Scope 0.5 MOA with Flip Up Lens Cover Cap
- Solid aluminum alloy construction with flip-up lens caps, durable and shock proof
- Red or green dual illuminated dot reticles with 5 level brightness control
- Multi-coated lens sealed with Nitrogen, water proof & fog proof, works great in all weather conditions
- Precision windage and elevation adjustments, features high/low profile quick release mount
- Fits standard 20mm Picatinny or Weaver rails
Features:
19. Allen Yukon Neoprene Rifle Sling
- Includes 4 shell loops
- Neoprene padded sling for comfort
- Heavy duty web contruction with a thumb ring loop
- Mossy Oak Break-Up Country camo
- Quality tested for maximum durability and performance
Features:
20. Tenergy Airsoft Battery 8.4V 1600mAh NiMH Stick Battery High Performance Stick Style Batteries w/ Mini Tamiya Connector, Replacement Battery for Airsoft Rifle AEG Guns AK47 CYMA RPK PKM
- Tenergy's 8.4V NiMH rechargeable battery pack is made of 7 cell 2/3A NiMH batteries
- Compatible with airsoft aegs like: AK47, MP5K, RPK, PKM, CYMA CM.028U, Crosman Pulse R76, GR8, DE UMP M89, Kalashnikov, Stg44, ERICS13, SIG 552 and other upgraded and/or modified AEGs, we recommend measuring the aeg compartment for best fit.
- The Tenergy 8.4V AEG battery features rapid charge up, with 1600mAh capacity.
- Airsoft stick battery measures 20mm (diameter) with 202mm (length) and Weighs 6.7 oz.
- Includes a Tamiya battery pack connector, mini Tamiya female connector assembled with 16 G wire.
Features:
I've got a like-new CondorOutdoor 36" single rifle bag, Tan in color. If you're in the U.S., I can have it to your door for $40 shipped. I really like the bag, but switched to a large storage bin for ease of transport for all my gear. It's pretty nice, has a few MOLLE pouches on the outside (the larger of which fits 6 mags perfectly), and a double pistol pouch to accompany the rifle compartment. I've even properly woven the MOLLE for you... Very secure, lots of padding, lockable zippers, and even a nice shoulder strap that is removable. Let me know if you're interested, it's this exact bag:
http://www.amazon.com/gp/product/B004VRS5GO/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
I can send you pics of the ACTUAL bag if you want... but it's going to look exactly the same.
Amazon has a set of Tritiums for Kimber 1911s, and I have no idea if they'll fit a KJW 1911: https://www.amazon.com/dp/B000YGPM26/ref=cm_sw_r_cp_apa_55waCbSWMV55N
As for the base gun, I chose a KJW because they're TM compatible and are a pretty decent company. The full metal setup helps too, and since I was going to use CO2 mags, I dont have to worry about the gas efficiency issues of single stack green gas mags.
Now I just have to source the parts I need. The hardest part is the silver lower lol. Thank you for the info, I appreciate it and I hope I can show off my build in some time lol
Trade:
CYMA Real Wood M14 - Value $290
Leapers 4x32 Scope - Value $50
M14 Scope Mount - Value $15
Gun Case - Value $40
Extra Magazine - Value $15
$410 value.
Here's a picture of the M14
AND
Brand new/still in box SVD AEG by King Arms, I put ~20 rounds through and it's working perfectly.
Picture of the SVD - Prices can range from $250-$300 on various sites.
___
Est. value: $560-$600
Note: Each gun comes with a 8.4v.
AEGs are gonna be hard to find for under $50, but accessories are always good to get!
You can find good red dot sights for right about there, or even some grips!
If you're really wanting to get them a gun, I would get them this or this as both are going to be the best you can find for the money.
The pistol mentioned is upgradable, as well as the rifle, as they both use standard, 'common' parts. So, if he wanted to make each gun better later, he could!
Also, many people on here have tons of second-hand guns (even I myself, I have a CO2 Sub-Machinegun that's about in your price range, but not the point) that you could probably get for around that price!
You can get a hard shell Plano that will fit you perfectly for 24 dollhairs on Amazon and get dat free shipping with Prime
I would but it is put away right now. I found a few links with some images of it and people wearing it.
http://www.amazon.com/Soft-Air-Airsoft-Vertical-Shoulder/dp/B0013CHTH6
http://www.greekairsoft.gr/eshop/img/p/2/5/8/0/2580-thickbox.jpg
http://www.airsoftgi.com/mobile/images/airsoft_CG_SwissArms_VertShoulder_Holster_A.jpg
It basically has a thick shoulder strap on the gun side (right side) and another thinner strap that goes around your left shoulder. There is also a belt attachment point for stability. I got it as a gift and it really isn't my thing, since it is hard to wear a chest rig with it. It looks pretty cool though. If you really want it, I will get it and take a picture of my specific one, but it looks exactly the same as it did new.
Thats cool. If you don't get another offer (that you like) how much for the 4 mags?
Also, why are you selling an eotech 552 for 60 dollars?
They are valued at over 400 bucks. Are you sure thats a legit eotech?
Amazon link here.
These are the foregrips. I like these because of the large diameter.
​
I bolted on rails like this on on the side.
​
I have the lasers on, and I used these to mount the grips at an angle because I found it to be more comfortable.
Of course you could mount the rail on the bottom and have a more traditional location for the grip.
Hey pro tip, Amazon sells really decent ones(nothing super special but very functional) for like $15.
link 1:
link 2:
https://www.amazon.com/gp/aw/d/B011LTAV7K/ref=mp_s_a_1_sc_1?ie=UTF8&qid=1474744308&sr=8-1-spell&pi=AC_SX236_SY340_FMwebp_QL65&keywords=guare+dog+goggles
I run these with no problems. They fit my wider frame glasses a tad snug but offer a good seal and are comfortable
Honestly, this is the one I use on my G3 and I find it to be the best for the price. https://www.amazon.com/dp/B002GNYCLM/ref=cm_sw_r_cp_apa_i_R5-0BbNM19GAH
I'm interested in the scope protector kit you made, those are lexan protectors right? What kind of sizes are included? Also, do you have any idea I'd put them on my sights? I can only think of super glue or hot glue. These are the sights I use to give you an idea of the size:
https://www.amazon.com/dp/B019PYPM2W/ref=cm_sw_r_cp_api_2OxHzbN47826B
https://www.amazon.com/dp/B018FZ998A/ref=cm_sw_r_cp_api_vRxHzbZ1F3JF7
Honestly with shipping and what I would want for it, you're better off just getting one on Amazon. http://www.amazon.com/Allen-Company-Yukon-Neoprene-Rifle/dp/B00014ZXXY/ref=sr_1_14?s=hunting-fishing&ie=UTF8&qid=1407889578&sr=1-14&keywords=rifle+sling
If you don't want to use lipos you can also use standard 8.4 and 9.6v batteries as well. AK stick batteries fit fine in this.
8.4V Tenergy 1600mAh NiMH Stick Mini Battery Pack https://www.amazon.com/dp/B0046I3V2Q/ref=cm_sw_r_cp_api_CqtsxbMPPNRC9
Like this
FYI - I just bought some revision RX frames off Amazon and I received the style you're looking for. Even though the picture showed the new style. Here's the link - https://www.amazon.com/gp/product/B007FHG2F8/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Edit: I can take a pic if you want.
If you don't already have a pouch/holster this works like really well