Best products from r/awesome

We found 20 comments on r/awesome discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 37 products and ranked them based on the amount of positive reactions they received. Here are the top 20.

Top comments mentioning products on r/awesome:

u/catherder9000 · 6 pointsr/awesome

Absolutely not a hijack.

Your HP G1 250 has those "chicklet" keys right?

http://i.imgur.com/JADuctd.jpg

They're not recessed but are the sort of raised little slabs? You can clean the shit out of those with a tooth brush (dipping the bristles in cleaner as you go) and a handful of cotton swabs. Just don't get it too wet while doing so -- be on the safe side and disconnect the battery and power cord just in case a tiny bit of moisture gets inside (it should not, they're designed as a sealed unit with a second catch tray under the keyboard that contains the LED back lighting to stop minor wet accidents like a dribble of coffee/water/etc.)

Just don't be too liberal with your cleaner (don't get the brush dripping wet) and you'll be fine. It'll take a bit of work but you should be able to get it clean like the day you bought it (minus the paint wear off the letters of course).

Shop towels (the blue ones) work great if you don't have any micro fibre cloths handy (mind you, those things are 4 for a buck at the dollar store so maybe go get a pack of em :).

The keys also pop out, you just have to gently work them out without levering them too much and you won't break the clips that hold them in.

If you find you have to replace the keyboard, it's not easy but it's not that hard, the only tricky part is popping the 3 tabs without breaking the clips. The upside is it's a modular repair and not a bunch of parts.

This is your service manual page 54 shows how to replace your keyboard if you have to do so. You can get a generic replacement part for 25 bucks. I didn't check the price from HP but it's probably $100 or more (the generic compatible one is perfectly fine).

But you should be able to just clean it if none of the keys are dead.

u/BlackWhiteCat · 2 pointsr/awesome

Looks like a dentists drill. Dremmel used to make something similar as an attachment. There’s is probably a fancy dentists or jewelers version since the work is very nice. Similar tool to what I have.

Sorry for the Amazon link.

https://www.amazon.com/Ketofa-Attachment-Extension-Polishing-Compatible/dp/B07KQ4PSCX/ref=pd_lpo_sbs_469_img_1?_encoding=UTF8&psc=1&refRID=3GBHCSXXY7WX0ADWXSQR

u/kurfu · 3 pointsr/awesome

This thing is awesome for opening packages.

...and certainly much less dangerous than using a kitchen knife.

u/fishguy04 · 1 pointr/awesome

Lol wait... you can buy the fixture here New. - EGG Ceramic Backflow Incense Burner Waterfall Incense Holder Home Decor Aromatherapy Ornament with 10 Cones Incense https://www.amazon.com/dp/B07MNMNKTJ/ref=cm_sw_r_cp_api_i_dUmPCbKBRFPYH

u/mrlionmayne · 1 pointr/awesome

From what my 1.5min worth of research suggests, it's a UK product...

u/RoninSpectre · 2 pointsr/awesome

Looked this up and you can get these on Amazon custom made for a reasonable price
https://www.amazon.com/Personalized-3D-Holographic-Valentines-Christmas/dp/B00D0J3JEM

u/Hexstation · 14 pointsr/awesome

The math for your question was done here: https://www.reddit.com/r/gifs/comments/6ko9yg/spinning_a_skateboard_wheel_so_fast_the/djnk5jf/

Copy-paste from previous thread:
This website says that the water coming out of the jet can attain speeds of up to 600mph. Assuming that the wheel is going at something closer to 400mph or ~180m/s (I doubt it would be going to full speed of the water), and taking in the size of a skateboard wheel (we are going to go with a 28mm radius and a mass of 0.1kg (based off an item on amazon)), than this thing is looking a centripetal force of ~125,000N, or about the weight of a school bus. That is also like ~70k rpm.
But yeah, the heat definitely contributed. That thing had to be hot as fuck.

u/Mr_Steenky · 2 pointsr/awesome

I couldn't find the exact name of the tool, but I did find this

u/BaconRapin · 1 pointr/awesome

Reminds me of a miniature Wenger 16999, but even that doesn't have a hammer.

u/aarghj · 1 pointr/awesome

We've been talking about that. Gonna order me one of these. Can't wait!