Best products from r/bootlegmtg
We found 9 comments on r/bootlegmtg discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 7 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Beemoon Jewelry Magnifier, 30 X 60X Illuminated Jewelry Loupe for Gems Jewelry Rocks Stamps Coins Watches Antiques Models Photos
- PREMIUM QUALITY. Ideal for gems, jewelry, rocks, stamps, coins, watches, hobbies, antiques, models, photos industry.
- Dual LENS. Primary lens: 30x22mm, Supplementary lens: 60x12mm. You can choose different lens freely.
- SUPER BRIGHT LED LIGHTING. Switch on/ off for bright white led light convenient for see the objects clearly under insufficient sunlight or dark environment.
- PORTABLE & LIGHT WEIGHT. Durable aluminum and plastic housing, easy to carry, with a small case to protect it.
- EASY TO USE & FOLDABLE DESIGN. Just pull out the magnifier to use, and put it back when not in use. It requires 3 LR1130 batteries (Batteries are Included).
Features:
▼ Read Reddit mentions
3. Fiskars SureCut Portable Trimmer with Recycled Cutline, 12 Inch Cut, Black
- Ideal for trimming office paper, coupons, photos and more
- SureCut wire cut-line makes it easy to see where the blade will cut for unmatched accuracy
- Patented TripleTrack System interlocks blade and rail for cuts that are straight and steady, never curved or wobbly
- 12 inch cut length and cuts seven sheets of paper at once
Features:
▼ Read Reddit mentions4. KMC Full Size Hyper Matte Sleeves (80-Pack), Black, Standard Size, Fits MtG, Weiss, Pokemon
- Great for collectible card game singles
- Perfect for tournament use
- Low gloss and less slick then regular sleeves
Features:
▼ Read Reddit mentions5. 500 BCW Brand Soft Card Sleeves/Penny Sleeves (5 Sealed Packs) - Standard Size 2 5/8 x 3 5/8, NO PVC
Size 2-5/8" x 3-5/8"Fits Inside Trading Card ToploadersProtect Cards While HandlingMade from Crystal Clear PolypropylenePerfect for Storage & Display
▼ Read Reddit mentions6. Swingline Paper Trimmer, Guillotine Paper Cutter, 12" Cut Length, 10 Sheet Capacity, ClassicCut Lite (9312)
- Easy to use trimmer – Lite trimmer is simple and easy to use, with a sharp guillotine blade and a handy alignment grid. Built with a sturdy plastic base, it's also light enough for easy transport
- 12” Cutting length – With a 12” cutting length, it's a convenient choice for most common trimming tasks. Ideal for use in the home or at the office
- Cuts 10 sheets – Excellent for everyday use, this neat little trimmer cuts through paper, photos and more, cleanly cutting up to 10 sheets at a time (20 pounds paper)
- Accurate cuts - Designed for accuracy, with an alignment grid for precision. Dual scale ruler, with marks in inches and centimeters, assists with measuring, regardless of which system you prefer
- Safety features - Guard rail keeps fingers safely away from the blade while it's in use. Blade latch hook securely locks the trimmer arm when not in use
Features:
▼ Read Reddit mentions
Top comments mentioning products on r/bootlegmtg:
Summary
1. Beemoon Jewelry Magnifier, 30 X 60X Illuminated Jewelry Loupe for Gems Jewelry Rocks Stamps Coins Watches Antiques Models Photos
- PREMIUM QUALITY. Ideal for gems, jewelry, rocks, stamps, coins, watches, hobbies, antiques, models, photos industry.
- Dual LENS. Primary lens: 30x22mm, Supplementary lens: 60x12mm. You can choose different lens freely.
- SUPER BRIGHT LED LIGHTING. Switch on/ off for bright white led light convenient for see the objects clearly under insufficient sunlight or dark environment.
- PORTABLE & LIGHT WEIGHT. Durable aluminum and plastic housing, easy to carry, with a small case to protect it.
- EASY TO USE & FOLDABLE DESIGN. Just pull out the magnifier to use, and put it back when not in use. It requires 3 LR1130 batteries (Batteries are Included).
Features:
▼ Read Reddit mentions3. Fiskars SureCut Portable Trimmer with Recycled Cutline, 12 Inch Cut, Black
- Ideal for trimming office paper, coupons, photos and more
- SureCut wire cut-line makes it easy to see where the blade will cut for unmatched accuracy
- Patented TripleTrack System interlocks blade and rail for cuts that are straight and steady, never curved or wobbly
- 12 inch cut length and cuts seven sheets of paper at once
Features:
▼ Read Reddit mentions4. KMC Full Size Hyper Matte Sleeves (80-Pack), Black, Standard Size, Fits MtG, Weiss, Pokemon
- Great for collectible card game singles
- Perfect for tournament use
- Low gloss and less slick then regular sleeves
Features:
▼ Read Reddit mentions5. 500 BCW Brand Soft Card Sleeves/Penny Sleeves (5 Sealed Packs) - Standard Size 2 5/8 x 3 5/8, NO PVC
Size 2-5/8" x 3-5/8"Fits Inside Trading Card ToploadersProtect Cards While HandlingMade from Crystal Clear PolypropylenePerfect for Storage & Display
▼ Read Reddit mentions6. Swingline Paper Trimmer, Guillotine Paper Cutter, 12" Cut Length, 10 Sheet Capacity, ClassicCut Lite (9312)
- Easy to use trimmer – Lite trimmer is simple and easy to use, with a sharp guillotine blade and a handy alignment grid. Built with a sturdy plastic base, it's also light enough for easy transport
- 12” Cutting length – With a 12” cutting length, it's a convenient choice for most common trimming tasks. Ideal for use in the home or at the office
- Cuts 10 sheets – Excellent for everyday use, this neat little trimmer cuts through paper, photos and more, cleanly cutting up to 10 sheets at a time (20 pounds paper)
- Accurate cuts - Designed for accuracy, with an alignment grid for precision. Dual scale ruler, with marks in inches and centimeters, assists with measuring, regardless of which system you prefer
- Safety features - Guard rail keeps fingers safely away from the blade while it's in use. Blade latch hook securely locks the trimmer arm when not in use
Features:
▼ Read Reddit mentions
that's really similar to how I make mine, except I use de-foiled backs. I use modern cards just for ease of access, but to be kinda authentic you could use Urza block foils. I foil peel the cards, and then glue on my printed faces. I'm currently printing on 15 lb paper, which is super thin, but not thin enough. I'm about to try dissolving paper so I can basically silk screen the ink straight onto the card. I'm aligning cardstock and printed paper using a 3-d printed card positioner I made, which is basically a frame that fits over the printed paper and allows me to drop the card on with perfect accuracy.
https://www.youtube.com/watch?v=etY_v7A3P2k
​
Please, for your sanity, watch this video. It gives multiple tests that will help you better distinguish between real and fake cards.
​
https://www.amazon.com/gp/product/B00K0BGNNC/ref=ppx_yo_dt_b_asin_title_o02__o00_s00?ie=UTF8&psc=1
​
Buy this or an equivalent. For ~$10 you'll save yourself a lot of grief and heartache.
There are a few things to consider. First, the guillotine seems great but it isn't very accurate and requires more work than you think (the repetition). Fiskars 12 Inch Recycled SureCut Trimmer (01-005454) https://www.amazon.com/dp/B003SLC3IU/ref=cm_sw_r_cp_apa_0n9CAbS90N938 This option is cheaper and more accurate. The blade is also easily replaceable. Don't do more than 1 sheet at a time. Can it be done? (Yes) But will it always off by a little? (Yes)
I have made extensive use of card stock terrain and have learned. There is also the high end option of purchasing a cutting machine but that is $100+ to get started.
These are the cheapest I can find the sleeves: https://www.amazon.com/Hyper-Matte-Sleeves-80-Pack-Black/dp/B00CJ7415M it sounds like you already have the perfect fits.
I forgot to post the link to black lotus before but here it is: http://www.aliexpress.com/store/1872540
I'm not sure if they'll have all the cards you need but hopefully its a start.
Don't be too nervous about your cards either. Most people don't pull out your cards while they read them, and with the two sleeves I doubt anyone will notice anything strange.
I use these https://www.amazon.com/BCW-Brand-Sleeves-Penny-Sealed/dp/B005LJX3X6 then slide these in eclipse matte with in the black so the borders blend in.
I use this: https://www.amazon.com/Swingline-Trimmer-Guillotine-Capacity-ClassicCut/dp/B016LDV41S
The paint I used:
https://www.amazon.com/Games-Workshop-Citadel-Casandora-Yellow/dp/B018GZD4B2/ref=mp_s_a_1_1?keywords=Citadel+shade+casandora+yellow&qid=1572891074&sr=8-1