Best products from r/computertechs
We found 62 comments on r/computertechs discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 375 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Metro ED500 DataVac 500-Watt 120 volt 0.75-HP Electric Blower Duster
- Sturdy all-steel construction. Please note: This item is a blower, NOT a vaccuum.
- Includes air pin-pointer, air concentrator nozzle, air -flare nozzle, micro-cleaning tool kit
- More effective than canned air and safer than canned air
- 500 watt motor, .75 HP, 4.5 amps, 70 CFM air flow
- 120 volt (not for use in 220 or 230-volt current).
Features:
2. iodd Iodd2531 - USB3.0 - HDD - SSD - Virtual CD-ROM - Enclosures - Made in Korea … (1 Unit/lot)
- Recognized as Bootable ODD (DVD, Blu-ray Rom), for booting by selecting a ISO file.
- Write protect Blocker/Win To Go/Auto Sleep/Safely Removal/Firmware Updater
- VHD - virtual hard disk image to physical drive
- The whole aluminum-body design is elegant and effective against external shock and radiant heat of HDD.
Features:
3. CompTIA A+ Certification All-in-One Exam Guide, 8th Edition (Exams 220-801 & 220-802)
- Used Book in Good Condition
Features:
4. TEKTON Everybit Precision Tool Kit (27-Piece) | 2830
- Includes 3-pc. slotted bits: 1, 1.5, 2.5 mm; 4-pc. Phillips bits: #000, #00, #0, #1; 3-pc. star bits: T3, T4, T5; 6-pc. tamper-resistant star bits: TR6, TR7, TR8, TR9, TR10, TR15; 2-pc. tri-wing bits: 0, 1; 2-pc. pentalobe bits: 0.8, 1.2 mm; 2-pc. nut driver bits: 4, 5 mm; 1-pc. precision screwdriver; 1-pc. spudger; 2-pc. bit organizers; 1-pc. storage case
- Specifically designed for repairing mobile phones, tablets, laptops, game systems, wristwatches, and eyeglasses
- Includes pentalobe bits for iPhone and MacBook
- Precision driver has a free-spinning endcap that allows constant finger pressure to be applied while turning
- Spudger lets you safely pry open housings without damage
- Specifically designed for repairing mobile phones, tablets, laptops, computers, game systems, wristwatches, and eyeglasses
- Includes pentalobe bits for iPhone and MacBook
- Precision driver has a free-spinning endcap that allows constant finger pressure to be applied while turning
- Spudger lets you safely pry open housings without damage
- All pieces store in pocket-sized storage case that goes anywhere
Features:
5. Extech ET15 Receptacle Tester
Detects 5 wiring faultsLights indicate circuit condition3-prong plug
6. Pit Bull CHIA001 Set 2 to 3 Adapter, 3-Piece
Quickly convert 3-prong plugs to grounded 2-prong for use with AC outlets. Great for outdoors, or indoorsLifesaver when you need to use 3-prong power tool or other appliances and no other outlet available125V/15 amp, each with clip for attaching ground wire (ground wire not included)Nice and rubbery...
7. 3 Way Outlet Wall Plug Adapter (T Shaped Wall Tap) 3 Prong
- Perfect to power items in different directions
- Expands (1) one outlet in to (3) three outlets
- 125V/15A/1875W electrical rating
- Grounded 3-prong outlets, UL listed
Features:
8. The Practice of System and Network Administration, Second Edition
- Addison-Wesley Professional
Features:
9. T3 Innovation Net Prowler Cabling and Advanced Network Tester
Supports IPV4 and IPV6 protocols, verifies DHCP connectivity and DNS, pings IPV4, IPV6, and URL addresses, CDP, LLDP, NDP, and VLAN detection, TCP/UDP throughput testDetects presence of PoE and class of PoE per IEEE 802.3af/at with load test for voltage drop, reports current link speed and link capa...
11. Thermaltake Dr. Power II Automated Power Supply Tester Oversized LCD for All Power Supplies - AC0015
- Supports all ATX power supply up to ATX12V 2.3
- Oversized LCD panel shows all voltages within 1/10th volt for quick and easy troubleshooting
- Voltage reading for all rails (+12V/5V/+3.3V/5VSB/ 12V)
- Built in output connectors diagnostic system, low voltage, high voltage, no voltage, PG alarms
- Built in alarm to notify user of unstable or abnormal power supply activity
- Easy to use troubleshooting system will quickly identify if power supply is the source of instability
Features:
12. Sabrent 2.5-Inch SATA to USB 3.0 Tool-Free External Hard Drive Enclosure [Optimized for SSD, Support UASP SATA III] Black (EC-UASP)
- Tool free design, easy to install,Transfer Rates Up to 480 Mbps when connected to a USB 2.0 port,Transfer Rates Up to 5 Gbps when connected to a USB 3.0 port.
- Suitable for 2.5” SATA/SSD; Supports Standard Notebook 2.5″ SATA and SATA II Hard drives
- Optimized for SSD, Supports UASP SATA III,Backwards-Compatible with USB 2.0 or 1.1
- Hot-swappable, plug and play, no drivers needed
- Operating System: Supported Operating Systems: Mac,Windows;Supported Windows Versions: Windows 7, Windows 8, Windows Vista, Windows XP; Supported Mac Versions: Mac OS X and Higher
Features:
13. Optimal Shop 20+4 Pin LCD Computer Power Supply Tester for SATA IDE HDD ATX ITX BYI Connectors-Black
- 8-in-1 ATX power supply tester: Support testing 20-pin IDE/24-pin IDE/HDD/floppy disk 4-pin/PCI-e 6-pin/4-pin/8-pin/SATA connector.
- Aluminum alloy shell: light and easy to carry, high strength, good thermal conductivity and corrosion resistance.
- 1.8" LCD screen: The output voltage is displayed on the 1.8" LCD screen, which is easy to read (1.8" LCD screen is powered by the 20-pin/24-pin connector). Note: Is there a scratch on the product screen? Because the screen is easy to scratch, we put a protective film on it, if you think it is not beautiful, you can tear it off by yourself.
- Buzzer alarm: When your power supply PG number fails, the power tester will emit a buzzer alarm, which is easy to know.
- When testing with HDD/floppy disk 4-pin/PCI-e 6-pin/4-pin/8-pin/SATA connector, the indicator on the left shows the output voltage (+12V + 3.3V + 5V).
Features:
14. StarTech.com DisplayPort to DVI Adapter - Active Conversion - 1920x1200 - DP to DVI Single Link Converter for DVI-D Display (DP2DVIS),Black
SECURE PORT CONNECTION: This DisplayPort to DVI active adapter features a latching DisplayPort connector, so you’re able to fasten and secure the connector to the portELIMINATE UPGRADING COSTS: Save the cost of upgrading your display by connecting your DisplayPort device directly to a DVI-D monito...
15. Ubiquiti UniFI Access Point UAP Outdoor 2x2 MIMO 5 GHz 300Mbps 180 Meters Range
Outdoor, Weather Resistant Enclosure5 GHz Band with 2x2 MIMOThroughput Speeds of up to 300 MbpsRange up to 183 meters (600 feet)Package Contains UniFi Outdoor5 Access Point, PoE Adapter(24V, 1A), Pole/Wall Mount Kits, Quick Start Guide
16. StarTech.com SATA to USB Cable - USB 3.0 to 2.5” SATA III Hard Drive Adapter - External Converter for SSD/HDD Data Transfer (USB3S2SAT3CB)
- QUICKLY ACCESS A SATA SSD OR HDD: By connecting to a SATA 2.5" SATA SSD or HDD using this SATA to USB cable--you can add storage, perform backups, create disk images, implement data recoveries, and transfer content to your laptop
- FAST TRANSFER SPEEDS WITH UASP: The SATA to USB adapter supports USB 3.0 data transfer speeds of 5Gbps, plus you can experience transfer speeds up to 70% faster than conventional USB 3.0 when connected to a computer that also supports UASP
- CONNECT FROM ANYWHERE: The hard drive USB adapter is a portable solution that tucks away nicely in a laptop bag with no external power required
- SAVE TIME: The hard drive transfer cable lets you easily swap between drives with no need to install the drive inside an enclosure--just plug and play
Features:
17. Funny printer repair T-Shirt for sysadmins, PC tech support
Printers... Why'd it have to be printers. -The perfect gift for all IT professionals or repair techicians who hate printers and work with PCs and Notebooks.A funny shirt for family members that are IT pros who work in tech support or as sysadmins and administrate networks, computers, switches, route...
18. Coolmax I-500 500W ATX 12V V2.0 Power Supply
- ATX12V version 2.0
- 120mm low noise cooling fan
- Single +12V output design
- Serial ATA 150 ready
- MTBF 100,000 hours
- Over voltage protection & short circuit protection
Features:
19. ASUS (RT-N16) Wireless-N 300 Maximum Performance single band Gaming Router: Fast Gigabit Ethernet, support USB-Hard Drive and Printer and Open source DDWRT
Powerful CPU provides a high-performance throughput up to 300MbpsMost widespread application with 2 USB2.0 ports : All-in-1 printer server and FTP files sharingOperating Frequency: 2.4 GHz; Interface: 5 Gigabit ports (1 x WAN / 4 x LAN)Graphical Network Map and Multiple SSID (guest SSID)Ultra-fast a...
20. General Tools 500 Precision Cordless Electric Screwdriver with Six Bits and Quick Change Chuck, Handles Difficult, Repetitive Screw-Fastening Jobs, Multi
CORDLESS- fast action super-torque drive applies more than 100 rpm that is powered by 2 AAA alkaline batteries (included)QUICK CHANGE CHUCK- makes changing bits easy on this power screwdriver plus the chuck is compatible with all micro (4mm) bits6 PRECISION BITS- comes with six popular bits: Phillip...
Oh you're very welcome!
For resumes, the cleaner the better. You want it to stand out, but, please, do not make it flashy. When I was a technical support supervisor, I was able to assist with the hiring and interview of techs. First we'd run through the resumes and throw out the ones that were covered in glitter, fancy paper, bright paper, and this one was covered in Windows logos... the paper was watermarked with a Windows logo and even the bullet points were Windows logos (we were a Windows-based web hosting company). These kind of resumes leave a bad taste in your prospective employer's mouth. Here's a great template that is similar to how I have my professional resume setup. Minus the sidebar and the header (this stuff I just placed at the top of the page formatted like all the other sections with the exception of my name and contact info), this pretty much lines up how you should have a professional resume. This one is probably a better example. I'd also suggest getting a LinkedIn profile if you don't already and mirror your professional resume on there. Head hunters do frequent LinkedIn and you could get a future job offer from there as well.
I would focus on getting your A+ and Network+ upfront because they substitute some experience. Just take note that CompTIA has changed the tests so that re-certification every 3 years (I think) is required to keep your cert(s) in good standing. This book is shipping in August, and should be considered the Holy A+ Bible. It is pricy ($60), but worth it. Before I get too further along, it's worth mentioning that the A+ is 2 parts. Part 1: Hardware, Part 2: Software (Windows). I heard rumors that CompTIA was supposed to finally axe Windows 9X from the exam (yes, I know... you have/had to know Windows 95 for the exam...) but no idea if they actually did or not. This guide seems like a great starting ground.
I used the "Exam Cram" series which include several practice tests along with lesson reviews and chapter tests. But there are a wide variety. I'd really suggest going to your local Barnes & Nobel and browsing the selection of A+ and Network+ books they have and find one you feel will help you learn the most out of.
Let me know if you have any questions!
No probs :)
a couple more links:
http://www.migee.com/2012/12/20/active-vs-passive-displayport-adapter-whats-the-difference-why-does-eyefinity-care/
http://www.cablechick.com.au/blog/active-vs-passive-cables-switches-splitters/
The cable you have there is 'passive' in that it is leaving the signal as it is and just passing it along. The problem with that is the graphics card can then see it is connected to a HDMI/DVI display and sends a compatible signal automatically. That would be great if it was the only display, but it takes up one of your HDMI/DVI 'slots'. So really it's not working as a DisplayPort at all, it's more like HDMI to DP to HDMI.
If you use an 'active' adapter, the card sees it as a DisplayPort device, and sends a DP compatible signal - the adapter then does the conversion to HDMI/DVI signal format for your screen. This leaves your 2 HDMI/DVI 'slots' free to work through the actual HDMI/DVI ports.
The active adapters are more expensive than passive because they have a chipset in them that's converting the signal - and your mileage may vary on things like HDCP, max resolution etc.
Here's the Amazon US listing for the adapter. Note that you can select Active or Passive under the 'Style' options.
EDIT:
Just realized you're actually in Australia so Amazon's not an option. Shop around and read reviews, the active adapter should only be about twice the price of a passive one.
I will write up some more specific feedback because I am interested in seeing the Pockethernet get better, and thanks for telling me about long-pressing the measure button.
To be clear though, I wasn't comparing the Pockethernet to the AT 2000. I was comparing it to the Fluke MicroScanner 2 for $440 which I own, and the T3 Net Prowler for $730, which I might have purchased instead of the Pockethernet.
Hardware criticisms:
Make sure all internal connectors are fully seated. My battery came unplugged. Make sure that the plexiglass protection film is removed. And at least in my case, the plastic on the wiremap/loopback tester is so loose that I had to take it off to use the tester.
App Bugs (iPhone):
I experience frequent crashes. Usually it seems when I leave and return to the app, or when I save results to Dropbox using the "Send" feature. This has persisted from an iPhone 6s Plus, to a brand new installation on a brand new iPhone X.
There is also a bug where the bottom half of the app disappears, or becomes covered in a white rectangle, and I am no longer able to scroll. This might be from the app trying to hide itself where the keybaord appears. Only way to fix is to quit and relaunch the app. Very frustrating.
App Workflow:
App flow should probably be like this: First HOME screen is a grid of icons for PRESET TESTS and an icon for a CUSTOM TEST. PRESET TESTS should be user-defined groups of frequently run tests. They should be icons, because that way more fit on the screen. Clicking on a PRESET TEST should take you to the RESULTS screen.
The RESULTS screen should only show the test results of the tests you just ran. It should have some persistent icons at the bottom of the page, that include a couple of selectable PRESET tests, as well as RETEST, CUSTOM, and HOME. This will make it easy to always quickly run a test.
The RESULTS screen should have the option to save results to a DATABASE. Often I will run additional tests for an outlet in the future, and I want the ability to EXPORT all of the tests from one outlet together, not have a separate PDF for each group of tests I ran on each outlet. The PDF export should only show the results of tests that were run.
If you instead clicked CUSTOM TEST on the HOME screen, you should be taken to a grid of icons with all possible tests. Check your desired test icons, click TEST, and be taken to the same RESULTS page as before.
There should be an interface for viewing the test results in the database, and deleting of specific tests for specific outlets.
This would make the Pockethernet interface much closer to Fluke's, Ideal's, and T3's interfaces, and much more useful.
Thanks!
I recommend getting the original from IODD, Zalman is reselling a slightly different version: https://www.amazon.com/Iodd-Iodd2531-Black-Virtual-Enclosures/dp/B00TDJ4BJU/
The IODD are much better from what I've heard. Apparently the Zalman versions also had sooner Firmware EOL. IODD also has a neat firmware recovery button that apparently Zalman doesn't have.
Tagging /u/HittingSmoke /u/bobowork and /u/Achileas7
Pro Tip: Connect the drive to the part with the display and connector before putting it in, I assumed it would automatically be in the right position and took way too long to troubleshoot lol.
I've had zero issuess with mine. Had it about a year. I used to double check with a voltmeter but I definitely trust the results now.
Don't get the Zalman one fyi, grab the IODD drive. It's the original one that they licensed from and has WAY more features and better support.
Iodd Iodd2531 Black - Usb3.0 - Hdd -Ssd - Virtual Cd-rom - Enclosures - made in Korea https://www.amazon.com/dp/B00TDJ4BJU/ref=cm_sw_r_cp_apa_ptnryb41KQSFN
Feel free to replace the enclosure > https://www.amazon.com/Sabrent-Tool-free-Enclosure-Optimized-EC-UASP/dp/B00OJ3UJ2S/ref=sr_1_5?ie=UTF8&qid=1467411679&sr=8-5&keywords=external+sata+enclosure
theirs tons on the market , pick what works best for you usb3 / firewire / etc. etc.
Best? Probably not. We've been firm believers in the Husky ones where I used to work: http://www.homedepot.com/p/Husky-8-in-1-Precision-Slotted-and-Philips-Screwdriver-Set-71281H/204664388
I used to take laptops apart for hours every day, it always seemed to do me well. I slighly preferred their older style (looked like this)
Basically they work well until they get lost, and they're cheap enough to just repurchase.
I also used this at another job: http://www.amazon.com/dp/B009MKGRQA
Not amazing quality, but I liked the selection of bits. Also cheap.
I'm not 100% sure what you mean by driver, is that's a drill-specific thing, but my go to screwdriver is a piquic multique. I get them for $7 at microcenter and have them scattered around the house and in every bag I have. I love these little guys.
http://www.picquic.com/index.html
http://smile.amazon.com/Picquic-Multique-Compact-Multi-bit-Screwdriver/dp/B001O0QDBK/ref=sr_1_1?ie=UTF8&qid=1449990237&sr=8-1&keywords=multique
Okay, thanks.
If there wasn't available power in the campground, would this PoE injector, This AP, and this Cat5 work as my solution?
Pick up a copy of The Practice of System and Network Administration. It's a great starting point for overall support and admin methodologies.
http://www.amazon.com/Thermaltake-Automated-Supply-Oversized-Supplies/dp/B005F778JO/
That's what I use, personally. It makes it fairly easy to test a supply since it will turn red and start beeping furiously if you are not getting enough juice. I don't test a ton of power supplies, so I can't speak to bulk usage/lifespan, but it has been great for my needs.
I have liked this Tekton 27 piece set for a while. I mostly like it because it comes with both size pentalobe bits, if you're doing any apple repair stuff. It comes as part of their 135 piece set too, which I think is a good deal. Reach isn't very long is the only real downside.
The datavacs really are quite nice. I use the smaller 3/4hp vac at work and just bought one for home. Its super portable and really gets the dust out. However, it does lack an actual vacuum and will kick dust everywhere! Link here: http://www.amazon.com/gp/product/B001J4ZOAW/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 (sorry I'm on mobile)
Edit: Learned to read previous comment. Corrected my comment on lots of dust.
I'd recommend something like this for the ISOs: https://www.amazon.com/Iodd-Iodd2531-Black-Virtual-Enclosures/dp/B00TDJ4BJU/
This for a tool kit: https://www.amazon.com/iFixit-Pro-Tech-Toolkit-2016/dp/B01GF0KV6G/ref=sr_1_3?s=power-hand-tools&ie=UTF8&qid=1511801169&sr=1-3&keywords=ifixit
As far as ISOs for the iodd, I'd suggest in addition to what you have already:
http://windowsmatters.com/2017/10/02/gandalfs-win10pe-x64-redstone-2-build-15063-version-10-01-2017/
If you work on Macs, a bootable USB of El Capitan and Sierra/High Sierra. You can create a virtual USB on the iodd for this.
Get one of these and clean all the things!
Summer is my busiest time of year, I can't believe you're looking for stuff to do! But as they say, "Time to lean, time to clean".
We image the entire district, do moves, build labs, deploy ~850 new systems (laptops/desktops/AIO's), pull cable, update/clean racks, and clean everything else we can get our hands on.
I'm glad you like it! I'm selling the shirt on amazon.
Buying a Metrovac was one of the best things I've ever done for my home gear:
http://www.amazon.com/Metro-Vacuum-ED500-500-Watt-Electric/dp/B001J4ZOAW/ref=sr_1_5?s=electronics&ie=UTF8&qid=1450813981&sr=1-5&keywords=air+blower
It's on sale for 56$! Never need to buy canned air again! WEeeeeeeeee
I use one of these on a daily basis.
Totally frickin awesome.
We have 2 of these at work and they work great!
A buddy of mine is really into routers and he spends an inordinate amount of time researching and trying to eek out the most performance so I always end up buying what he has and flashing whatever ROM he's using. He and I are using the ASUS RT-N16 with TomatoUSB. It's incredibly easy to flash and my network has been fast and stable.
Ok, I just passed the A+ a few weeks ago (didn't need it, but figured I needed something to get me over the hump and actually start getting my certs).
I used Mike Meyer's CompTIA Cert Guide (I took the 2009 version of the test btw)
I used Transcender test prep (it was provided for free as part of the 5 day class I took)
I watched all of the Professor Messor videos on youtube.
I took a class (more on this below)
I used Exam Cram
The first exam is the difficult one. It's not difficult in that you'll need to have a lot of experience or that the questions are tricky. It's difficult in the sense that you'll need to know a little about a LOT of stuff. For example, do you know how many pins are in a centronics cable? Do you know if it's serial or parallel? Do you know what device it's primarily used for? (36, parallel, printer) I studied for about 2-3 weeks pretty seriously (daily sample tests, questions, etc...did it during free time at work and after work at home). This study took place after I had read both of the books cover to cover (it's boring).
The second example (practical application) is cake walk if you've a) passed the essentials and b) have worked in IT support at all. Just a bunch of scenario questions. I studied about 3 hours for this exam.
I passed both exams on the first try about 2 months apart (I took a vacation in between).
The class was pointless knowledge wise. I've been in IT for a long time so it really was just for people who have ZERO experience. It helped since my work paid for the class and it included the Exam Cram book, transcender test prep access, and vouchers for both exams.
So to summarize my huge wall of text.
There will be people who disagree or study differently. More power to them. This is how it worked for me though. I will say that it's probably possible to pass the exam without doing some of this, but I really hate wasting money and would have been devastated if I had to re-take the exam.
Anyway. Here are some links. I'm sending you the 800 exam stuff since I imagine you'll be doing that instead of the 700 series (which is discontinued in a few months).
Mike Meyers
Exam Cram
Transcender test prep
Professor Messor videos
My friend, like/know it or not, you are a SysAdmin. Read this book and check out things over at /r/SysAdmin and you should be okay.
I use a Dr. Power II and it does a great job.
https://www.amazon.com/Thermaltake-Automated-Supply-Oversized-Supplies/dp/B005F778JO/ref=sr_1_1?ie=UTF8&qid=1493684045&sr=8-1&keywords=dr+power+ii
I've had good experiences with: http://www.amazon.com/Metro-Vacuum-ED500-500-Watt-Electric/dp/B001J4ZOAW. Works well, and is fairly cheap.
So far I've been happy with this. It comes with a digital edition and a discount for the exam fee, so it pays for itself.
You might also want to look into a local community college course if you'd prefer having a class.
Here is what I use for resale. Had the same issues as you until I found these. Been happy with them for 2 years now
Coolmax I-500 500W ATX 12V V2.0 Power Supply Coolmax https://www.amazon.com/dp/B0081H7EDK/ref=cm_sw_r_sms_awdb_gBsPybG8QTBTY
If you want one that's not a toy, grab a Metro Vacuum ED500 DataVac 500-Watt 0.75-HP Electric Duster instead.
Highly recommended. Just be sure to have your earplugs handy, they're loud.
Can you show us what the drive inside looks like? There are retail solutions for encasing laptop-sized drive in a USB case.
https://www.amazon.com/Sabrent-Tool-free-Enclosure-Optimized-EC-UASP/dp/B00OJ3UJ2S/ref=sr_1_1?keywords=usb+hard+drive+case&qid=1573567950&s=electronics&sr=1-1
Did you buy this?
If you are trying to do case screws with that you should be using something stronger like DLSS linked.
Then just switch to a Zalman or IODD enclosure with a 1TB drive in them and stop caring all together. These drives have been such a huge time saver.
None of the below links are affilliate.
If you're getting into more network layer stuff, you'll want a cable toner, RJ-45 Ends, Cat 5 or 6 Cable, RJ-45 Crimper as well.
This?
ASUS (RT-N16) Wireless-N 300 Maximum Performance single band Gaming Router: Fast Gigabit Ethernet, support USB-Hard Drive and Printer and Open source DDWRT https://www.amazon.com/dp/B00387G6R8/ref=cm_sw_r_cp_apa_YdDHxbFV89MTC
I would like to see someone from /r/computertechs review one of these: electric precision screwdriver
You could take off the plastic case and use something like this: StarTech.com SATA to USB Cable - USB 3.0 to 2.5" SATA III Hard Drive Adapter - External Converter for SSD/HDD Data Transfer (USB3S2SAT3CB) https://www.amazon.com/dp/B00HJZJI84/ref=cm_sw_r_sms_apa_i_zMPYDbY41HJJ5
I find it's much easier to just drop a ISO into a folder and have it boot like a cd rom drive. You can emulate floppy drives and make persistent linux live installs. I do find some systems that won't recgonize the virtaul cd rom but those systems usually have issues booting USB drives.
https://www.amazon.com/Iodd-Iodd2531-Black-Virtual-Enclosures/dp/B00TDJ4BJU/ref=sr_1_1?s=electronics&ie=UTF8&qid=1498944043&sr=1-1&keywords=iodd
Install servers is a BIG DEAL. Unless you have someone in your shop who is taking charge, you want to familiarize yourself with some of the concepts of systems administration or else you will have a bad time.
Visit /r/sysadmin, /r/homelab /r/itdept.
Buy this book: http://www.amazon.com/Practice-System-Network-Administration-Second/dp/0321492668 <---it is the best book in the world
I've been using probably the same General Precision Screwdriver as you for awhile now and it works great for most small screws. There are a few that require a bit of a wrist flick to loosen. I havn't broken it yet but I was lucky to get this PLUS the General Cordless Engraver for $10 for both so not a big deal if it gives out.
For larger screws I either use a Black and Decker 7.2v Lithium Cordless Drill (very lightweight but powerful) OR a Ryobi Tek 4 Cordless Screwdriver (a bit heavier but has light on the chuck, removeable rechargeable battery, and a '2' speed setting for quick removal of loose screws).
I just use a Power Supply Tester
I use a air compressor that was specifically designed as a computer blower/vacuum. Depending on which side you connect your hose to, will designate whether it's a blower or vacuum.
Here's a link: http://www.amazon.com/Metro-Vacuum-MDV-1BA-DataVac-Computer/dp/B00006IAOR
I used to use this blower: http://www.amazon.com/Metro-Vacuum-ED500-500-Watt-Electric/dp/B001J4ZOAW
I still do, mostly out-side. If I'm somewhere that I can't remove the hardware I'll just try to use the vacuum feature on the first link I wrote above.
http://www.amazon.com/Practice-System-Network-Administration-Edition/dp/0321492668
<a />
Don't carry cans of compressed air, carry a DataVac blower: http://www.amazon.com/Metro-Vacuum-ED500-500-Watt-Electric/dp/B001J4ZOAW/
Is there power in more than one location on the campground?
Could you use a set of Ubiquiti Nanostation M5 unit's for backhaul to a second site, then use Unifi Outdoor units for client access?
http://www.amazon.com/Ubiquiti-US-FCC-NSLOCOM5-NanoStation-loco/dp/B004EHSV4W
http://www.amazon.com/Ubiquiti-UniFI-Outdoor-Access-802-11b/dp/B0066DV06I
The Unifi will blow the doors off any netgear, so you might try it regardless. It has a software controlled notch filter that gives it unparalleled sensitivity to incoming signals, plus a low distortion, reasonably high powered output.
I noticed in one of the pics you had a compressor. I imagine that's for blowing dust out? We used to use one of those and it was pain worrying about moisture, etc. My friend, I introduce to you the most utilzed, highly regarded purchases we've ever made: This thang right here!