Best products from r/coolermaster

120mm, I bought the cooler master 3rgb fan plus controller kit. :

Cooler Master MasterFan Pro 120 Air Balance RGB- 120mm Hybrid RGB Case Fan, 3 In 1 with RGB LED Controller, Computer Cases CPU Coolers and Radiators https://www.amazon.com/dp/B0731KRCTX/ref=cm_sw_r_cp_api_ScjQAbNYE0D3J

The case itself comes with a splitter for the two preinstalled rgb fans plus led panel on top, which connects all three things to one male connector. This plus the 3 rgb fans from the kit will take up all 4 connector slots on the RGB controller.

I believe the case can also support 140mm fans on the top and front panels.

This case supports full sized PSUs. I recycled my Corsair PSU from my old build and it fit perfectly.

Radiator space is a little tight, especially when using the Corsair H80i v2, but I managed to fit it sideways behind the front panel. The fans are interesting on this case: the front and top fans are outside of the metal frame and inside the acrylic panel, so you can mount the radiator right on the case frame on the other side of one of those fans. I also had enough space to attach a secondary fan on the inside of the case, with amble room between the fan and the motherboard

It's not the best performing cooler in the world but it will do an 8700k no problem as long as u have mounting hardware

What is he charging?

Any of these three below will destroy it in cooling performance:

Great: Scythe Mugen 5 Rev.B 120mm Air CPU Cooler, Tower Heatsink with 6 Heatpipes, Quiet PWM Fan, Intel LGA1151, AMD AM4/Ryzen https://www.amazon.com/dp/B06ZYB8K77/ref=cm_sw_r_cp_apa_i_Ua.ODbV70A7RN


Better: Scythe Fuma 2 120mm Air CPU Cooler, Twin Tower Heatsinks with 6 heatpipes, Dual PWM Fans, Intel LGA1151, AMD AM4/Ryzen https://www.amazon.com/dp/B07RFNG89S/ref=cm_sw_r_cp_apa_i_2.-ODbCTFMDNC


Best: Thermalright Le Grand Macho RT (with fan TY-147B) https://www.amazon.com/dp/B01BCLXO7Q/ref=cm_sw_r_cp_apa_i_ka.ODbYSZHAQF

wow a 10 feet cable?

​

I think you could get something like this: https://www.amazon.com/CableCreation-Extension-Extender-Repeater-Booster/dp/B0179MXKU8/ref=sr_1_2_sspa?crid=2CJY63UNTJEDP&keywords=usb+3.0+extension+cable&qid=1555446452&s=gateway&sprefix=USB+3.0+e%2Caps%2C196&sr=8-2-spons&psc=1

​

will work great

That is indeed a tight fit! It seems it is the Cooler Master vertical mounting kit that is giving the issue. Perhaps an optional way would have been to just use the riser cable without that kit and instead opt to support the card with something like this: https://www.amazon.com/dp/B07T7VN3GR/ref=sspa_dk_detail_5?psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzOUJHOU4yNDJTVDVRJmVuY3J5cHRlZElkPUEwODIzNjQ1MU1DOFdCSVJOR0NKQiZlbmNyeXB0ZWRBZElkPUEwMDkyOTQyMlNBRExQMjdIN1pCWSZ3aWRnZXROYW1lPXNwX2RldGFpbDImYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl#customerReviews

4 pin RGB connector only powers the LEDs,it won't power the fans,for that you'll have to plug in the molex(most probably,the one with only two male pins). Keep in mind you can't control fans with molex,they will run at full speed but they're pretty quiet imo. If you want to control them,you'll have to get a one fan header to three way splitter,cooler master most probably only includes molex to three way splitter.

I suppose I can't pre order from somewhere in the EU if I'm in the United States. Just got my tax return back and this was going to be a gift to myself :P

edit: Is this the keyboard? I do not know why I did not see this on amazon until now. It says ships in 1-2 months... seems sketchy...

Link to Amazon

Ah okay, thank you. I was looking at something like this:

https://www.amazon.com/SUPERNIGHT-Remote-Controller-Wireless-Control/dp/B00AF5YOK2/ref=sr_1_3?ie=UTF8&qid=1525203776&sr=8-3&keywords=rgb+controller

But I'm assuming I have to buy 3 of them since they only have 1 cord.

PBT should be $10 cheaper, i think it lacks some features such as P buttons on top right which lets you switcth different modes quickly. If you consider using macros on the go pro model has it. But you can achieve same thing with software. So if you want a solid keyboard with quality keycaps go for pbt. Also check out this sub r/MechanicalKeyboards you can drop a comment to the pinned thread at the top, they're very helpful.

Here on amazon for example: https://www.amazon.com/Corsair-Magnetic-Levitation-Lighting-CO-9050076-WW/dp/B076VD725X

I bought them for 70€ tho, but they're really good

It will be tough doing it via internet shopping due to you only looking at photos of the item. It's be even tougher finding a decent electronics stores that will have various cables in stock to you can look at the jack to see if it's likely to fit.

May the RNG Fairy smile at you during your search.

Looking at the cable provided though, I think this can fit into the headset jack and then it's just a case of getting a longer male/male 4 pole cable to connect it to the pc.

https://www.amazon.co.uk/FosPower-Extension-Auxiliary-Headphones-Speakers-Gold-x/dp/B01552UGMY

https://www.amazon.com/Cooler-Master-Direct-Contact-Unique/dp/B01KBXKP8W/ref=sr_1_1?ie=UTF8&qid=1502468768&sr=8-1&keywords=cooler+master+212+led is the place I purchased. My box clearly states that this cooler is AM4 Compatible straight out of box with no new brackets required.

My Model Number is: RR-212L-16PR-R1
My Ticket is 00107441.
There are numerous other people on newegg that seem to have the same issue, even when they receive the new 212 LED
It looks just like this, with the slit in the middle for the retention handle.
http://assets.coolermaster.com/products/hyper212-led/img/web_hyper_212led_01_01.png

I have not heard back from Coolermaster since 8/4/2017

It's for fan/led controllers which have a pci bracket as a base. You probably have to remove the metal and add some additional metal piece to the top of the slot to hold the bracket in place.

Something like this: https://www.amazon.com/NZXT-CB-LED20-BU-Sensitivity-Sleeved-2-Meters/dp/B0046Y5Z5G

I just use a a standard 3.5mm to 1/4" adapter like this:https://www.amazon.com/3-5mm-Stereo-Jack-Adapter-black/dp/B00142BZSY and it works fine.

There is a SF360R ARGB fan in the market from Cooler Master:

​

https://www.amazon.com/Cooler-Master-Independently-Controlled-Addressable/dp/B07PCGYG1V/ref=sr_1_1?keywords=sf360r+argb&qid=1562817391&s=gateway&sr=8-1

That's for the TKL version. My original post above is asking about the full version with number pad.

https://www.amazon.com/Cooler-Master-Mechanical-Keyboard-Switches/dp/B07WHHMGWV/

If you can't find the brackets that came with your board you can order new ones like these https://www.amazon.com/Ecowsera-Bracket-Version-Mounting-Distance/dp/B071KB9NM3

​

here you go ;) today is at 152$
https://www.amazon.com/Cooler-Master-MasterCase-Computer-MCM-H500P-WGNN-S00/dp/B078XPZ8ZY/ref=sr_1_1?keywords=h500p+mesh+white&qid=1549624341&sr=8-1

I see on Amazon.ca that it will start shipping from Amazon March 27+.This will come with the new key caps and firmware software updates?


https://www.amazon.ca/gp/product/B07N4DFPNM/ref=ox_sc_act_title_1?smid=A3DWYIK6Y9EEQB&psc=1

This is the one that you're looking for :)
Don't know when will the sk621 white be released :(

https://www.amazon.com/Cooler-Master-Mechanical-Keyboard-Switches/dp/B07WHHMGWV/ref=sr_1_44?m=A1FEO2FBXOY7WI&marketplaceID=ATVPDKIKX0DER&qid=1567065066&s=merchant-items&sr=1-44