Best products from r/foxmustang
We found 12 comments on r/foxmustang discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 9 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. TEKTON 11143 1/4-Inch by 5.5 mm Deep Socket, Cr-V, 6-Point
- 6-point opening snugly fits hex-shaped fastener heads to apply maximum torque without slipping
- Advanced design grips flat sides of fastener heads, not corners, to prevent round off
- Extra-deep broach reaches over long, threaded shafts to access nuts
- Detent notches in drive end lock onto ratchets and extensions
- Made from premium chrome vanadium steel with a durable mirror chrome plated finish
Features:
2. MEGUIAR'S G55032SP Complete Car Care Kit
- COMPLETE CAR KIT: Includes 12 premium products to clean, shine and protect your paint, interior, wheels, bumpers and everything in between. Takes guesswork out of the equation.
- GOLD CLASS CAR WASH: designed to blast away dirt and grime while boosting your car’s shine
- GOLD CLASS CARNAUBA PLUS LIQUID WAX: keeps your car reflective and leaves long-lasting protection
- ENDURANCE TIRE GEL: provides high gloss protection that keeps tires black with a dark gloss shine
- ALSO INCLUDES: Clay Bars and Quik Detailer to remove bonded contaminants, ScratchX 2. 0 to remove swirls and scratches, Quik Interior Detailer to clean and protect interior surfaces, PlastX Clear Plastic Cleaner & Polish to remove defects on uncoated clear plastics, and accessories
Features:
3. ARES 70073-3-Piece Impact Universal Joint Set - 1/4-Inch, 3/8-Inch and 1/2-Inch Drive Chrome Moly U Joint Sockets Access Hard to Reach Fasteners
DESIGN: This 3-Piece Impact Universal Joint set includes 1/4, 3/8 and 1/2-inch Drive U-Joints and features a Manganese Phosphate coating to resist corrosion and is laser etched for easy identification. Designed for use with all cordless, electric and pneumatic impact wrenches, the spring-loaded dete...
4. HIKARI LED Headlight Bulbs Conversion Kit -9004(HB1),TOP CREE (XHP50+XM-L2) 9600lm 6K Cool White CREE,2 Yr Warranty
- ▲Top CREE XHP50 leds,2546lm/per led.[More reference from Cree official website]
- ▲Suitable for: 9004/HB1. Used for Headlight , Fog Light, DRL. Adjustable Beam.Fits the housing with retainers.
- ▲TWO YEARS warranty offered on damaged items and defective items(conditions apply)
- ▲Perfect and fast after-sales service.Get a new replacement within 2 days(Only Hikari can do this).You can see the replacement for warranty on our shop homepage.
- ▲Amazon filter system may not be 100% accurate or up to date.If you are not sure which bulb size that your vehicle requires,please google "Philips automotive bulb look-up."
Features:
5. UView 560000 Combustion Leak Tester
- Fast, Economical and Accurate method to test for combustion gas leaks
- 16 ounce test fluid good for 16 applications
- Works on gasoline and diesel engines
- Positive proof that a leak is present when the tester fluid changes color
- Foam lined storage case to protect the tester (glass)
Features:
6. 1979-93 Compatible/Replacement for FORD MUSTANG 5.0 BILLET ALUMINUM POWER STEERING BRACKET SET - BLUE
- Power steering bracket set
- Anodized blue finish aluminum.
- Fits 1979-93 Ford 5.0L Engines
- Includes hardware.
Features:
7. 9004 HB1 (Hi/Low) LED Headlight Bulbs, 60W 6400Lumens 6500K Cool White Super Bright, NAO Adjustable Beam Conversion Kit
[300% Brighter Than Halogen] - NAO LED headlight bulbs with 60W, 6400LM per pair and 6500K cool white. Super focused beam and stable light output provides wider and farther lighting range. 300% brighter than Halogen headlights, ensuring your safe drive.[10 Minutes Easy Installation] - NAO LED bulbs ...
8. The Hillman Group 58356 Brass Inverted Flare Fitting Conversion Adapter , 5-Pack
Assortment includes male connectors & conversion adaptersNot for use with potable waterIncluded variants range from 3/16" to 3/8" in inner diameterMade of high-strength steelBrass finish provides attractive look and moderate corrosion resistance
9. Pioneer TS-SWX2502 10 inch Shallow-Mount Pre-Loaded Enclosure
- Music Power (Nominal): 1,200 W (400 W) Frequency Response: 20 Hz to 125 Hz, Sensitivity (1 W/1 m): 93 dB, Impedance: Single 4Ω Tight bass from a shallow compact design, Reinforced MICA injection-molded resin preloaded subwoofer cone
Features:
You can never go wrong with memerobilia like a poster of his favorite mustang, or a sweatshirt with a foxbody on it or something. A basic or intermediate detailing kit is also a car guy must-have in my opinion, some guys go crazy detailing their cars but I think most like to do more than just wash it, it is their baby after all.
Amazon.com: Meguiar's G55032SP Complete Car Care Kit:
https://www.amazon.com/Meguiars-G55032SP-Complete-Car-Care/dp/B0012ZEZ8A
Not sure what tfi tool you're using, but I bought this socket and it fits perfectly
edit:here's the link for US amazon
https://smile.amazon.com/3-Piece-Universal-Sockets-Accesses-Fasteners/dp/B01E0G1Q3Y/ref=sr_1_10?ie=UTF8&qid=1487470095&sr=8-10&keywords=swivel+adapter
something like that
HIKARI LED Headlight Bulbs Conversion Kit -9004(HB1),TOP CREE (XHP50+XM-L2) 9600lm 6K Cool White CREE,2 Yr Warranty https://www.amazon.com/dp/B06WD18LLQ?ref=yo_pop_ma_swf
Right now its at about 280 k miles. Looking up online there is a combustion leak tester. What is your thoughts on it?
Also if it is blown head gasket do you think those head gasket sealers would work?
Everyone is telling me to get rid of my 5.0 but fuck that I love her!
I will look into compression test right now
edit: fixed links
http://www.amazon.com/dp/B004XWNGP2/ref=cm_sw_r_udp_awd_0a0cub0J3WPNK
Or you can look up "CFR bracket, Mustang" on google or Amazon
Amazon https://www.amazon.com/gp/product/B076P4GDD2/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=brew2lvlogs-20&linkId=ce7faa672ad7a8b945c0d9ed109bd41f
I'm doing the same thing now. To run these brakes you should use a master from a v6 up to 1998. Unless you are using sn95 disk brakes the proportioning valve might not be needed, as the point of them is to adjust rear pressure compared to front. The booster is a toss up if you want it or not. I'm not, but might in the future.
EDIT: if you're planning to use 99-04 front brake lines you may need an adaptor for the passenger side. I'll link it up when I find the one I ordered.
EDIT EDIT: here's the link
The Hillman Group 58356 Brass Inverted Flare Fitting Conversion Adapter , 5-Pack https://www.amazon.com/dp/B00NUFRFEG/ref=cm_sw_r_cp_apa_i_VrjzCbHAEHJYJ