Best products from r/fpgagaming
We found 4 comments on r/fpgagaming discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 4 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Noctua NF-A4x10 5V, Premium Quiet Fan, 3-Pin, 5V Version (40x10mm, Brown)
- Premium quiet fan, 40x40x10 mm, 5V, 3-pin Molex, 4500 RPM, 17.9 dB(A), >150,000 h MTTF
- Award-winning 40x10mm A-series fan with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior quiet cooling performance
- Ideal replacement for noisy or broken 5V 4cm fans in 3D printers, DVRs, NAS, switches, routers, other network and storage devices, etc.
- 3-pin 5V version with 4500rpm, not to be used at 12V (such as in PC environments)
- Includes anti-vibration mounts, fan screws, extension cable and OmniJoin adaptor set for connecting the fan to proprietary fan headers
Features:
2. IBERLS 36W 12V 3A (Compatible with 2A) Power Supply Adapter for CCTV Camera, LED Strip Light ect Household Electronics, 5.5x2.1 DC Plug with 4 Connector(LED Connection, 4.0x1.7, 3.5x1.35, 5.5x2.5)
- [Extensive Compatibility] Input: 100-240V AC, 50-60Hz, Wide voltage design, Almost all countries contain civil voltage range, This product is widely used, application products such as: Led Flexible Light Strip, 5050 RGB, Security Camera audio, video gear, switches, LED & LCD TVs, USB Hub, Computer Monitor, DVR Streaming Media Players, Android TV Box and so on.
- [Intelligently Identify] Output: 12V Max 3A / 3000mA, it means that it can supply with all amperage which smaller than 3A. ---such as 2.5A, 2A, 1.5A, 1A, 600mA, 750mA, 800mA, 900mA all is available, For example If your device drawing the current only needs 2A then only 2A will be supplied. However, if you needed more than 3A then you will get 3A also.
- [Security] We focus on producing power adapters, No noise, low temperature operation, no spontaneous combustion, no explosion, provide stable output.
- [Exquisite Shell] Shell size: 87*55*47mm The actual goods are more exquisite than the picture, Wire length: 1.5m approximately 5 Ft, Wires longer than similar products.
- [More Selective] Comes with connectors. 5.5*2.1mm Polarity: positive (+) center, to meet your more requirements, we will come with your 4 connectors worth $5 to you, Gift connector: LED connection / 4.0*1.7mm / 3.5*1.35mm / 5.5*2.5mm, Due to different production batches, gift connectorr may be slightly different from the above connectorr, Specifications are subject to the phisycal product.
Features:
3. Designing Video Game Hardware in Verilog
- SUPER SOFT - SOFT AND COSY “YAK” SHAWL THE ORIGINAL OVERSIZED BLANKET SCARF: Hand Loomed on the Tibet - Nepal border these beautiful shawls are perfect for keeping your warm for all occasions - a luxurious 190cm x 85cm in size
- NOT JUST FOR WINTER: a versatile fashion accessory that isn’t just for winter. Our shawls can be worn for any occasion; wedding, cruises, evening BBQ’s, Country or Beach walks, wrap around whilst reading a book or for the yoga lovers use a meditation blanket.
- ETHICALLY SOURCED - LOVINGLY HANDMADE: 100% FAIR TRADE produced by a women's skill development centre on the Nepali Tibet border, looking after ladies that come from a disadvantage background.
- THE YAK SHAWL MYTH: Our shawls are commonly known as Yak Shawls, however, the shawls are not made from Yak Wool. The Yak name actually refers to the fluffiness of the shawls which have been brushed to be fluffy like the Yak. Our shawls have been tested at the Assay office to determine the true composition which is: 60% Acrylic, 25% Cotton, 15% Polyester, therefore a wonderful fashion accessory for Vegan’s.
- THE PERFECT GIFT: For you or a special friend or family member, our shawls make the perfect gift for her or him! Birthday, Christmas, Mother’s Day or Father’s Day, give them a shawl to wrap up in an alternative to a friendly hug.
Features:
4. NorthPada Raspberry Pi 3 Model B B+ A+ Plus Power Supply Charger AC Adapter 5V 3A PSU Micro USB 5 Feet with Power On/Off Switch (1 X Power Supply)
- A product of NorthPada; Input: AC 100-240V 0.3A 50/60Hz, Output: DC 5V 3000mA/3A
- Cable Length: 150cm/5Feet with On/Off Power Switch, Inline Noise Filter
- For Raspberry Pi 3 Model B B+ A+, Raspberry Pi 2 Model B, Raspberry Pi A/A+/B/B+, Raspberry Pi Zero, Raspberry Pi Pico, ASUS Tinker Board S
- Come with a micro USB to USB C Adapter, it can also support Raspberry Pi 4 Model B, Raspberry Pi 400
- Package included: 1 x 5V power supply with micro usb, 1 x micro USB to USB C Adapter
Features:
Noctua NF-A4x10 5V, Premium Quiet Fan, 3-Pin, 5V Version (40mm, Brown) https://www.amazon.com/dp/B00NEMGCIA/ref=cm_sw_r_cp_api_i_yQGTCbG38PZ5Q
Noctua fan Dreamcast mount: https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F273766717721
https://www.amazon.com/gp/product/1728619440/
If you want to turn your MiSTer on and off, a lot of us use this power supply which doesn’t drop voltage
https://www.amazon.com/gp/product/B01N336XEU/
and this type barrel adaptor for it
Fucung DC 5.5x2.1mm (type M barrel) Male Plug To Micro USB Female Connector Adapter Charge Converter https://www.amazon.com/dp/B07G5DS6J4