(Part 2) Best products from r/hwatch

I like diver watches, hehe. This band is a replacement for the Luminox 3000 series dive watches. It's 22mm in size so it doesn't fit our watches. Have no fear. Since this band is polyurethane, it can be easily modified. I used a x-acto to notch out 2mm on both sides. You can't even tell it's modded. :) You can get it [here] (http://www.amazon.com/gp/product/B004HZBOWM?psc=1&redirect=true&ref_=oh_aui_search_detailpage) But it's currently out of stock. There's a 23mm band here. Good luck!

A non-OEM one just popped up on Amazon. It looks like there are going to be some options soon. This one even looks like it might be better than the original (Removable cord). Ignore the single-star rating - That's all about Qi charging. http://www.amazon.com/Pacoco-Charging-Charger-Support-Wireless/dp/B019ID277S/ref=sr_1_3?ie=UTF8&qid=1452252456&sr=8-3&keywords=huawei+watch+charger

I bought this http://www.amazon.com/gp/product/B00024WC7S

Here's what it looks like

So far I like it, the spring pins it came with worked perfectly with the watch.

I ordered a black BARTON silicon band from Amazon and it's nice. It has the quick release and looks good with the watch. https://www.amazon.com/BARTON-Quick-Release-Choice-Colors/dp/B01ASOGBYG/ref=cm_sw_em_r_c_awdo_d_pxzzxb79TPW9R_lm

Yea, I've been looking for a good leather band as well, the black one with white stitching that came with mine is not exactly want I like, and I didn't like the metal one.

The band is a 20mm band with notches cut in the top to bring it down to 18mm which is what the watch takes. so an 18mm band will fit fine on it, but I would prefer a 20mm/18mm.

I have been looking for a Horween stone leather band similar to the one on my Moto360, or at least for Huawei to release their other bands for sale.

Was also considering posting on /r/LeatherClassifieds to see if anyone there makes watch bands.


You could go with the seller this redditor went with /r/hwatch/comments/3ylo1t/my_18mm_leather_band_came_today/

The Amazon seller does ship to Canada, and the band doesn't look half bad http://www.amazon.com/Horween-Vintage-Calfskin-Matching-Hand-Stitch/dp/B00I4EX4SE

Has anyone tried an istrap band? Looks pretty good. Although it's 18mm all around, or even narrower in the buckle.
https://www.amazon.com/dp/B00QBTTI2U/ref=cm_sw_r_other_awd_meTxwbP8SEX01

This one might be a good alternative for those of us in the US. It looks pretty much the same and both are allegedly "genuine leather".

if you want the 22mm straps you will need to trim the ends, if there synthetic fibers and you're good you could heat up a exacto knife and trim it up without any loose fibers or use glue after you trim it, but you will still need a 18mm spring bar and a tool you can get them pretty cheap on amazon, just a note i'm not sure quick release pins will work on them so i wouldn't buy them.

Toscana makes bands like this, especially the locman style.

I've searched a LOT though, and I haven't found a single band with a dashed pattern like OP's photo. Could be exclusive to a single watch model, part of a modified/discontinued line, or even custom made.

I love my Truffol 22mm Metal Link band https://www.amazon.com/dp/B01GRIHGBY/ref=cm_sw_r_cp_apa_dT0hAbJNVJJ09

I use it everyday.

Edit: I have the hw2classic.

Great deal on Amazon only 16 hours left...

http://www.amazon.co.uk/gp/product/B00VSGVVNA

This stand + a standard drinks bottle cap jammed into the hole + 3M tape (or black tac) = an excellent HWatch stand.

It does look like the version with the steel mesh band is going for $300 on Amazon right now

The deal has since ended

You can use any 18mm spring bar. Dont use a quick release one as it will probably not fit into that watchband.

Something like this should work fine for you

Well, Amazon US has a sale right now.

http://www.amazon.com/gp/product/B013LKLIC4?ref_=cm_sw_r_other_awd_5osPwb1MRBXD2

I have this one, it's very good. It does not support data communication through the computer, though.

https://www.amazon.com/gp/product/B01G15ZLJM/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1

Was it maybe the fitness tracker?

https://www.amazon.com/Huawei-Wristband-Multi-Sport-Waterproof-Black/dp/B074PFG5V3/

To be honest the wrist is just a terrible place to measure in general when you're moving your arms around a lot. I use the HW1 for passive reading and then a Scosche Rhythm+ between my bicep and shoulder for actual exercise. Or you could go the chest strap route.

The stainless steel variant is $206 for anyone looking to buy that - https://www.amazon.com/gp/aw/d/B013LKLIC4/

Is this watch compatible with the M.O.D.E bands? So you have this version? http://www.amazon.com/gp/aw/d/B013LKLIC4/ref=mp_s_a_1_4?qid=1463784428&sr=8-4&pi=AC_SX236_SY340_FMwebp_QL65&keywords=huawei+smartwatch&dpPl=1&dpID=41gPmiycPQL&ref=plSrch

https://www.amazon.com/gp/aw/d/B013LKLI9C/ref=mp_s_a_1_1?ie=UTF8&qid=1480644931&sr=8-1&pi=SY200_QL40&keywords=huawei%2Bwatch&th=1&psc=1

Then buy a black leather 18mm band, or anyother 18mm band, doesnt even have to be made by huawei

I'd say no.

Amazon has a brand new leather band model discounted to $270 today, or the stainless steel model for $280.