I have the Belkin BOOST UP.

I like it. Works well as my bedside charger. It's a wireless fast charger that definitely works. The LED light is small and not-too bright, but you can easily position your phone to cover it, nonetheless, without worrying that your phone's not getting charged.

There's a circular traction ring that keeps the phone stable even when you're getting phone calls or other notifications.

I also have this Samsung Wireless Fast Charge Stand.

I used it at work because it's sleek and functions well since I have an iPhone X. I always charge overnight, so I haven't needed to use it too often, but it works well nonetheless.

It's not certified to fast charge Apple's iPhone devices, so you'll notice that it's definitely slower than wired charging, and it's also slower than the Belkin.

Holds onto the phone well.

Samsung makes a Convertible version.

Pretty much same information applies as what I wrote above. Samsung currently doesn't have any wireless fast chargers that are certified to fast charge Apple's devices.

I recently bought the RAVPower HyperAir Wireless Fast Charge Stand.

It's a fast charging stand that I've replaced my Samsung stand with at my desk.

Nice, sleek design. I haven't been able to run tests against the Belkin yet, but they're fairly comparable. It's definitely faster than the Samsung stand, though.

I'm thinking about buying the Apple-certified Mophie Wireless Fast Charge Pad for my living room.

I've heard good things about it.

Anker recently released an Apple-certified fast charge pad and fast charge stand.

I've only read impressions from a MacRumors contributor, but he or she was fairly impressed.

There are plenty of chargers that are cheaper, but I'm interested in quality and wireless fast charging.

And I'm only going to trust the Apple-certified brands for wireless fast charging.

UPDATE: I bought the Mophie Charge Stream Pad+, which allows charging up to 10W. The iPhone X and XS devices will still only charge at 7.5W, but the XS devices will charge more efficiently, so they should be faster.

I would spring for the 10W version because it'll be helpful for friends with Android devices. Also, it makes it a little more future proof should apple allow the XS phones to charge at 10W with a future software update or allow next year's iPhone devices to charge at that wattage.

I love this case. It blends in perfectly with the Matte Iph7+. Just thick enough so your phone feels more protected (I've dropped mine several times with this one - no damage to the phone) but thin enough to keep the phone small. Speakers are fully surrounded and edges are just tall enough so the phone can lay facing down and up without the camera/screen touching the surface. The apple logo is exposed; I can see why you might have an issue with that but I never got a scratch on it (and it looks really nice).

For a screen protector, any glass cover will be perfect. The plastic ones pick up too much grease and have that annoying rainbow effect when you angle the phone. I use this one from Tech Armor. So far it's been a year and there's no scratches on it yet. Looks like brand new and it's low enough so it blends in very well with the case I mentioned above (as well as the apple cases. The edges on the screen protector are curved so you won't feel the edge). I should also mention it's a lot easier to install glass cases because it won't bend everywhere and there's no bubbles after installing (there might be some very small dots but those go away completely after 2-3 days.)

I would go with the Matte Black. I think it's a lot cleaner than the Jet black. The j/b is too easy to scratch and fingerprints will be very noticeable. I wouldn't trade mine for a second.

Get yourself a good adblocker for Safari. Adguard and 1Blocker work perfect. SoundHound for songs you hear out in public and don't know the name/artist. Other than that you just need to go exploring for apps you like.

This got wayyy longer than I expected lol. Regardless of what phone you get, you won't regret it one bit :) enjoy the new iPhone!

Edit: Spigen makes great cases all around. Tech21 if your want more protection with the cost of adding more bulk to the phone. A little pricey but they are seriously good cases.

Get the Incipio NGP case if you want something really protective but not at all bulky.

Screen protectors are pretty ugly in my opinion, I don't use one and my screen has been fine.

My favorite apps are...

• Wunderlist - Great to-do list app, has a desktop/mac version which syncs so you can make lists and reminders on your computer as well.
  
• Week Cal - better Calender app than Apple's default one, syncs with everything the default app syncs with.
  
• Chrome - should be obvious
  
• Evernote - better note app than the default one, also has a desktop version which syncs.
  
• Alien Blue - amazing reddit client, don't even look at anything else for reading reddit.
  
• Dropbox - file storage, syncs really well with the desktop version so it makes it very easy to get files on and off your iPhone.
  
• Reeder - best app that syncs with Google Reader.
  
  You might want to hold off on jailbreaking for now and just play around with your new iPhone to see what it can do without the jailbreak. I always hear about problems people have with certain apps when they jailbreak, so it doesn't seem worth it to me.
  
  

2018 New magnetic adsorption iPhone XS/XS MAX/XR case adopt multipoint and strong magnetic field adsorption technology with built-in magnet surrounds the glass case .The powerful magnetic adsorption makes the frame and phone case seamlessly connect which always make your iPhone XS/XS MAX/XR stand out among crowd. And iPhone XS/XS MAX/XR case clear back cover shows the Apple logo and the original phone design clearly which preserve the iPhone . Now, buy from here:  amazon store

📷

iPhone XS/XS MAX/XR case's 360 degree full body metal frame protection and hard tempered glass design raised bezels lift screen and camera off flat surfaces, toughed nano-glass back, anti-scratch & anti-dirty, protect your phone from scratching,shock & smudge, premium materials offer unrivaled protection and enhanced durability. Diamond cutling edge make the iPhone XS/XS MAX/XR case cool and magnificent which make your phone look different .

📷

Precise cutouts for speaker, camera, flash and other functional ports of Apple iPhone XS/XS MAX/XR ,which allow access to all ports and functions easily without removing the case.Ultra Thin Clear Hard Tempered Glass Back Cover with 2-3mm thickness design of iPhone XS/XS MAX/XR can support wireless charging and not block cell phone signal without removing case,it is not easy to absorb heat when charging due to the back tempered glass.

📷

The magnetic adsorption case is compatible for iPhone XS (5.8”)/XS MAX(6.4”)/XR (6.1'') ONLY . Lightweight and waterproof design can keep your iPhone XS/XS MAX/XR thin and convenient to carry. Magnetic strong adsorption mobile phone shell automatic closing, easy to assemble. More methods of installation are waiting for you to find out. [Note : please kindly note that the tempered glass of iPhone XS/XS MAX/XR case is in the back, there has no tempered glass in the front]

Apple Leather Case ($45) - I used one of these for my iPhone 5S and now for my iPhone 6. It's absolutely beautiful. Feels very comfortable in the hand, and is very minimalist, while providing a good deal of protection in exchange.

Tech Armor Ballistic Glass Screen Protector ($10) - Amazing screen protector. The glass is much better compared to the plastic ones - it sits very close to the actual screen, offers much better protection, has its own oleophobic anti-fingerprint coating, and doesn't take away from the clarity of the screen at all.

TwelveSouth Hirise Dock ($35) - Very nicely designed stand/charging dock that works with the lightning cable, great to keep on the desk or bedside.

I buy tempered glass protectors strictly because they feel more like the original screen, but they have the added benefit of looking a lot better than plastic protectors.

Every time one breaks I think "I'm glad that wasn't the screen", peel it off, and buy a new one. You can get them for pretty cheap on Amazon. This Spigen one even comes with an install tool to put it on perfect for less than $12.

It feels a bit thicker/bulkier but once you've got used to it it's not too bad. I've had one on the 6 Plus and 6S Plus but on the 7 Plus they weren't released so I got a Spigen Rugged Armor, it's very similar the only difference is it doesn't have the metal backplate that goes over the silicon case but it feels much thinner.

The silicon case both on Tough Armor and the Rugged Armor has grooves in it, it's supposed to push air through if the phone drops onto a hard surface to help dampen the phone and absorb impact. I don't know how much truth there is in that or if it's a marketing gimmick but I know I've dropped my 6 Plus hundreds of times and it's never broken anything in the phone. In the past on my 4/4S/5/5S I've had different cases and dropped then probably 6-10 times and then something breaks like the mic, the speaker or home button. So I think the Spigen Tough Armor cases are probably worth the money. That said I'm really happy with the Rugged Armor and may just stick with that as it feels much thinner and nice in the hand.

Get the Tethys. I have it on my XS max and its perfect. You get 3 of them too, full screen coverage. Fantastic feel, all notch sensors work perfect and super easy install.

​

Its tempered and HD clarity comparable to ZAGG's. Also have the best reviews.

​

https://www.amazon.com/Protector-Designed-Coverage-Protection-Tempered/dp/B07D6XR7FM/ref=pd_sim_107_2?_encoding=UTF8&pd_rd_i=B07D6XR7FM&pd_rd_r=93a3d4b1-cdcc-11e8-8a4a-61489532c619&pd_rd_w=0inQT&pd_rd_wg=9C4Xo&pf_rd_i=desktop-dp-sims&pf_rd_m=ATVPDKIKX0DER&pf_rd_p=18bb0b78-4200-49b9-ac91-f141d61a1780&pf_rd_r=W6DK806X1J4ZSV90ZWZT&pf_rd_s=desktop-dp-sims&pf_rd_t=40701&psc=1&refRID=W6DK806X1J4ZSV90ZWZT

iPhone XS/X Screen Protector Glass (3-Pack), amFilm iPhone XS/X Tempered Glass Screen Protector with Easy Installation Tray for Apple iPhone XS, iPhone 10S (3-Pack) https://www.amazon.com/dp/B074ZNLM9J/ref=cm_sw_r_cp_tai_RC9UBbPAAHHZS


Check this out I actually loved this and it looks great. Best part is it has a case to help you apply the protector perfectly ! Edit read this wrong my apologies. This is front.

I'm going to go right ahead and agree with this guy, you can go the Bluetooth route.

BAM!

GOgroove FlexSMART X2 Wireless In-Car Bluetooth FM Transmitter with... http://www.amazon.com/dp/B003PPGOC0/ref=cm_sw_r_udp_awd_YRB5tb0DT11TC

Had this for a few years and it works perfectly. It's worth if you really want to play your favorite songs in the car for sure. It also has the added bonus of hands free calls, but it's mediocre at best it works but it could be better.

I ordered a bunch of cases...I like the feel of these two:

Luvvit Clear Case

Hoco Carbon Fiber Case

I also got this one...but the first two I like a lot:

Tozo Clear Thin Case

When it comes to screen protectors I got this one and I absolutely love it!

Tozo Screen Protector

These are the ones I like so hopefully this helps, if not obviously has a lot of case. Enjoy your iPhone X!

I got an Aukey USB-C wall adapter and a lightning to USB-C cable on Amazon. Everything total cost around $30. Totally worth it.

Edit:
This was the cable that I bought. Long, braided, very nice. Gets the job done:
https://www.amazon.com/gp/product/B077FM5BZ2/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

And this was the wall charger that I bought. I got it for $20, but it looks like the price has gone up a little bit. This is the fast charger and together with the above cable, you get that sweet sweet quick charge for your new iPhone:
https://www.amazon.com/gp/product/B06Y427WT7/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

Hope this helps :)

Past Note 3,4 and 7 owner here. Go with the 7plus. Yes the phone is slightly bigger but it's still manageable. I'm rocking the JB in this [https://www.amazon.com/dp/B01KK8TZMU/ref=cm_sw_r_cp_api_fzvgybW3WQRSW] and still feels good in the hand. I think since your used to the screen size, you'd be disappointed in anything less. As far as the phone itself, I love! Super quick and silky smooth.

Case. Hands-down. Any gripes you have with using a case will easily be squelched when you decide "just for one day" to go without a case on your phone, it slips out of your hands, and suddenly you have a smashed screen.

I've learned my lesson already. Best to get a good case and learn to love it.

Edit: And you don't have to go with a cheap-looking case. I got this: iPhone 7 Plus Case, Spigen [Rugged Armor] Resilient [Black] Ultimate protection from drops and impacts for iPhone 7 Plus (2016) - (043CS20485) https://www.amazon.com/dp/B01GIWGAAC/ref=cm_sw_r_cp_api_Uf85xb4AJMBPS. The protection is very good, the button pressure is just right, and the back has strips of a woven carbon pattern on the top and bottom. It looks really nice.

I can throughly recommend this case it not only protects the phone’s edges but gives a lot of confidence it handling it too. It feels very comfortable and looks great.

Invest in a quality screen protector with a lifetime warranty. My personal preference is the ZAGG GLASS InvisibleShield.

Another good investment would be a good case, I like supporting Diztronic because they're an American company and very well known in the Android world. The owner is super in touch with his customers. Both the regular and "Voyeur" options are good. I own both. The "Voyeur" offers a little more drop protection.

As for apps. You'll find everything you used in Android you have on iOS. When it comes to Reddit apps. I prefer using AlienBlue.

Anker is a highly reputable brand and sells a well priced qi charger for around 20 USD. Would check it out on amazon.

https://www.amazon.com/Anker-Wireless-Charger-Charging-Devices/dp/B00Y839YMU

I didn’t get the faster wireless charger because it also requires a more powerful charge adaptor which brings total cost to around 50 USD.

https://www.amazon.com/gp/aw/d/B01KJL4XNY/ref=psdcmw_12557639011_t1_B00Y839YMU

It also isn’t confirmed at this point in time whether Apple will support fast charge for 3rd party chargers, so it’s a bit of a gamble right now as to whether you’ll be able to take advantage of the faster charge rate. Even then it’s not much faster compared to the first wireless charger if you can hook it up to an iPad charge adaptor.

Yep- wireless chargers definitely charge slower than cable, even if you buy the iPhone wireless charger may.

It depends on the controller the wireless charger has. I’ve had my anker charger for the past 2 weeks and been very happy with it. They have good technology to manage battery charge once it’s full, so wouldn’t worry about it affecting battery. Can’t speak to the other chargers though.

All in all, I use the wireless charger at work, it charges slower but the lack of cable makes it easier to pick up and use when needed, and is good for a top up during the day. However, I use the cable at night to charge because it’s quicker and I’m not moving around as much as I am in the office.

[I love love love Spignen’s screen protectors. I am extremely hard on my phones and they work perfectly. ] (https://www.amazon.com/dp/B07HRYZFN3/ref=cm_sw_r_cp_api_i_gxiYCbZGA2GQ0)

I use this one and I would recommend it. It comes with an installation kit which helps you align your screen protector perfectly. It's super smooth - feels like the original glass of the phone.

I use the Spigen Thin Fit iPhone X Case with SF Coated Non Slip Matte Surface for Excellent Grip and QNMP Compatible for Apple iPhone X (2017) - Matte Black https://www.amazon.com/dp/B074CM9928/ref=cm_sw_r_cp_api_51WbAbSZCNKGQ

and put a magnet in top right of phone next to camera so that I can use magnetic car mount & Wireless charging and works perfectly! Love it! Being that the case is thin, has a decent grip to it, I put Qmadix Liquid glass on front and back along with a tempered glass screen protector for added protection.

I dont know much about the Pixelskin HD, but I have the Incipio NGP and it is amazing. It comes with a good screen protector and is probably one of the best bargains, going for 12 dollars on Amazon.

Glass feels amazing! It feels like the actual glass of the phone. It never bubbles and the sides never peel up. It doesn't have that gross plastic feel to it that is somewhat grippy and sticky. It won't yellow after being used for long periods of time. This is the one I use on my 6 Plus and I love it. There's a warranty too. So if you ever drop it and it cracks, just order a replacement. It's pretty easy to apply to the phone.

This case is awesome. Ppl have complained about it but it's just fine for me and great. Ppl don't even notice I have a case on it and it's great for gripping the phone.

iPhone 6 Plus Case, Spigen® [METALLIZED BUTTONS] iPhone 6 Plus (5.5... http://www.amazon.com/dp/B00LLGLR18/ref=cm_sw_r_udp_awd_Dxikub0S3QG3E

I installed this yesterday and am very happy with the purchase. It's super clear you can't tell any difference when looking through it. It feels just like the glass on he phone.

iPhone 6 Plus (5.5 inch ONLY) HD Clear Ballistic Glass Screen Prote... http://www.amazon.com/dp/B00NGMVD8W/ref=cm_sw_r_udp_awd_scPzub0716EKC

I am looking at going with the a spigen (http://www.amazon.com/gp/product/B00LLGLR18/ref=gno_cart_title_1?ie=UTF8&psc=1&smid=A2SFKRF5TPZMT5) case, looks alright, and the price is right. I've had good luck with their stuff in the past, and honestly its just to hold me over until element releases new alu bumpers for the 6+.

edit
some pretty good photos of what one looks like installed on the phone
http://forums.macrumors.com/showthread.php?t=1785998
/edit


Link to the cheap glass protector?

i'm less then unimpressed with the current crop of glass proctectors as they all seem to not go out to the case/edge of the glass. I get that its curved but for $30+ they should be putting some R&D into it to make it a pleasant feeling interface.

This one is great it covers the entire front glass. I wish they made a version without the black trim and just left it clear. Even with the trim it is a great screen protector worth the 9 bucks.

https://www.amazon.com/dp/B07597BPQT?ref=yo_pop_ma_swf&th=1&psc=1

I use this. Spigen's No-Slip case.

I cannot provide a picture of my device in the case right now, but here's some pictures of the back and the front left side.

I like it. The back has a nice grippy matte feel to it, and I like that the bottoms ports are open, so it's easy to remove and clean. Adds almost no width or extra weight, either.

Really not bad for $10.

-fixed link.

Edit - Here's some more pictures. Album

I got the Diztronic case in matte black for my gold XS. I’ve owned diztronic cases for the iPhone 6, 6s, and 7. I’ve owned a couple of other cases but I somehow always go back to this brand. The matte blue used to look amazing with the phones with white faces, but this is the first time I’m opting for the matte black. Hoping the gold shows through the camera cutout.
https://www.amazon.com/iPhone-Diztronic-Matte-Slim-Fit-Flexible/dp/B075RDFQ1T

Max boost tempered glass screen protector
https://www.amazon.com/Maxboost-Protector-Tempered-Advanced-Accurate/dp/B073DLZWX7

This is my setup. I have this fm transmitter and love it
GOgroove FlexSMART X2 Bluetooth In-Car FM Transmitter with USB Charging , Multipoint , Music Controls & Hands-Free Calling - Works with Apple , Samsung , LG & More Smartphones , Tablets , MP3 Players https://www.amazon.com/dp/B003PPGOC0/ref=cm_sw_r_cp_awd_B5NQwbW6NM7SN

Then I use this mount and love it as well.
iOttie Easy One Touch 2 Car Mount Holder for iPhone 6s Plus 6s 5s 5c, Samsung Galaxy S5 S4 S3, Note 4 3, Google Nexus 5 4, LG G3. https://www.amazon.com/dp/B00JRGOKQ8/ref=cm_sw_r_cp_awd_M6NQwbC017DRG

I recommend Spigen, I just got the Neo Hybrid for my 6+ and it's great! Nice and grippy, great clearance for screen when screen faced down on surface and doesn't add to much weight to it. They do them in a variety of colours and sizes. I got the Gun Metal Grey one.

Here's some pics of mine , a link to Amazon and a YouTube review.

1: http://imgur.com/xHXRmYK

2: http://imgur.com/Tt7B5iJ

3: http://imgur.com/TsvzCXQ

4: http://imgur.com/XC5Ot1R

http://www.amazon.com/gp/aw/d/B00LLGLR18?pc_redir=1411210908&robot_redir=1

http://youtu.be/ZD4dvBWeXeE

I recently got an XS and got this screen protector and it's amazing.

It comes with a guide that snaps onto the phone. Just place it against the guide, lie it down and press down the middle, then smooth out the sides. It left 0 bubbles, not even around the edges. It's perfect and I love it.

https://www.amazon.com/gp/product/B074ZNLM9J/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

It's not clear, but this Diztronic case is cheap and wonderful. My wife and I both have it and love it. She's dropped her phone in a parking lot and neither of us could even tell anything happened.

http://www.amazon.com/Diztronic-Matte-Black-Flexible-iPhone/dp/B00NETYY60

I recommend this one because it extends a good amount past the screen preventing a screen shatter on a face down drop. It feels good in the hand, doesn't hold fingerprints, and doesn't add too much bulk. Not many color choices though. $10 Amazon Prime.

Diztronic Full Matte Black Flexible TPU Case for Apple iPhone 6 - Retail Packaging http://www.amazon.com/dp/B00NETYY60/ref=cm_sw_r_udp_awd_ZdRoub1A1GVTS

I bought this one and really like it. It was also the easiest screen protector I’ve ever had to put on. It comes with a frame that fits around your phone that allows you to easily perfectly align the protector. Also didn’t have any bubbles or anything.

On the protector I bought, [which is this one](TOZO for iPhone X Screen Protector Glass [ 3D Full Frame ] Technology Premium Tempered 9H Hardness 2.5D PET [Soft Edge Hybrid] Super Easy Apply for iPhone 10 / X [Black Edge] https://www.amazon.com/dp/B07597BPQT?ref=yo_pop_ma_swf), I would say it doesn't highlight the notch at all. I like the black protector because it doesn't have any raised edges or weird cutouts, it's all just super smooth.

Another Spigen Slim Fit iPhone 6 here:

http://www.amazon.com/Spigen%C2%AE-Non-Slip-Perfect-Fit-Premium-Excellent/dp/B00JH87ZSQ/ref=sr_1_5?ie=UTF8&qid=1411176198&sr=8-5&keywords=spigen+slim+fit+iphone+6

Fits perfect. Some weird reviews in there but it is perfect for me. Not a protective case, more of a scratch and bump protector but that's what I like, maximum pocket-ability.

I got the Spigen Neo Hybrid Case. Its not too bulky but provides nice protection and looks good. I would recommend this one. Heres a link

http://www.amazon.com/Spigen%C2%AE-METALLIZED-Protective-Gunmetal-Protection/dp/B00LLGLR18/ref=sr_1_1?s=wireless&ie=UTF8&qid=1413210903&sr=1-1&keywords=iphone+6+plus+spigen+neo+hybrid

I've used amFilm Glass Screen Protector on my XS and now my 11 Pro, in my opinion they're the best glass screen protector I've ever used and I've used quite a few.

amFilm Glass Screen Protector

You get 3 in this pack which is just a steal for the quality and price. The screen protector also covers a wider range of the actual screen itself so there's no rainbow effects as far as I can see. The edges are also very smooth so you won't really even feel them as you glide your fingers them.

​

Now as far as case goes I'm using the Razer Arctech Slim case for my 11 Pro and the fit, finish and look is just killer. I also like the fact that it does indeed cool down your phone if it ever heats up. My screen used to dim when I was outside smoking and the sun was beaming down on it. With this case that doesn't happen anymore. I'm extremely pleased with the case and it's one of the best ones I've had on any of my iPhones.

Razer Arctech Slim Case

I had a black leather on my 7+ for a year and with the X I went with a super thin Spigen. Honesty, I am a bit OCD so the nicks in the leather really started bothering me. At least with the Spigen it’s $10 so I can replace it cheaply. With it being thinner it add 0 bulk or extra weight which I’m loving.


Spigen Thin Fit iPhone X Case with SF Coated Non Slip Matte Surface:

https://www.amazon.com/dp/B074CM9928/ref=cm_sw_r_cp_api_D6MeAbNJDWQTB

I have bought the Diztronic TPU case this week. Very slim, classy and reviews say it protects well. Has a nice lip to cover the front as well.
http://www.amazon.com/gp/product/B00NETYY60/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

ummm...I dont know? haha. I just generally buy cheap ones through amazon - my only screen is an anti-fingerprint coating (which doesnt last forever but w/e).

Literally the determining factor on this one was the fact that the pack included a guide to help get the placement correct (first time I have seen that).

FWIW this is what I got: https://www.amazon.com/gp/product/B073DLZWX7/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

I don't put too much thought into the protector. Mainly there to prevent light scratches - I dont expect it to save my phone from certain death. So with that in mind, the cheapo ones tend to do a great job. If it gets busted, no brainer to just slap a new one on.

I buy everything related to charging from Anker. Best portable chargers, wall chargers, cables etc. in my opinion.

Haven’t use their wireless charge pad but they make great stuff. Says it’s Amazon’s Choice. Only complaint seems to be you can’t jus throw it on but you learn where the sweet spot is.

https://www.amazon.com/dp/B01KJL4XNY/ref=cm_sw_r_cp_api_lNweAbPB50M5G

Been using the same through the past year on the different phones I own (XS Max, Pixel 3, S10, Note 9 and now the 11 Pro). Works like a champ and having a fan built-in is a bonus.

​

Amazon Link

I went with this case and this screen protector. They work good together, it helps keep the X slim but totally protected. I also have custom skin to show through the clear back.

My vote is the minimal Apple case. Also check out the spigen thin fit case, I got it in black and it has a large enough “lip” over the screen to protect against a face flat fall...

Spigen Thin Fit iPhone X Case with SF Coated Non Slip Matte Surface for Excellent Grip and QNMP Compatible for Apple iPhone X (2017) - Matte Black https://www.amazon.com/dp/B074CM9928/ref=cm_sw_r_cp_api_plR-zbNYBBC68

Got the Spigen thin fit...has a curved out space for the metal piece and supports the wireless charging. To be clear, I do not have the metal piece inside the case so I haven’t tested whether or not it would still charge with that.

Spigen Thin Fit iPhone X Case with SF Coated Non Slip Matte Surface for Excellent Grip and QNMP Compatible for Apple iPhone X (2017) - Matte Black https://www.amazon.com/dp/B074CM9928/ref=cm_sw_r_cp_apip_XxRYYVwLhWxIu

I spent some time researching this, and this one has the best reviews on amazon. I've had it for about two weeks so far and it works great!

http://www.amazon.com/gp/product/B003PPGOC0/ref=oh_details_o02_s00_i00

For those interested, these tempered glass protectors are amazing.

Got mine in today and application was streamlined, quick, and perfect.

What’s more, they go around the notch and wouldn’t end up causing any kind of issues with the sensor array.

Here ya go!
Wireless Charger, Clear Spigen Case, Spigen Car Mount Case, Peel Case, Glass Screen Protector, Apple Watch Stand, Airpods Stand.
I realize that the magnetic Spigen case won't work with wireless charging, but it's specifically going to be used as a car mount case for long drives/trips etc. These are Canadian links to Amazon, unfortunately.. but I'm sure that they should be easy to find elsewhere.

Sure. This is the one I got. Super easy to put on too. It’s actually kind of fun watching it adhere itself to the screen.

iPhone X Screen Protector, Maxboost (Clear, 3 Packs)https://www.amazon.com/dp/B073DLZWX7/ref=cm_sw_r_cp_api_xDVhAb0MZ6DE9

https://www.amazon.com/Ringke-Protection-Absorption-Technology-Protective/dp/B01KU36SES/

I got one for $1 from their preorder sale, seems like a nice case. I've had the Ultra Hybrid on my S7 and HATED it.

Not sure if you can deal with sides that aren't clear, but this is one of my favorite case makers. They've been tearing it up lately, great design and craftmanship:

https://www.amazon.com/SUPCASE-Unicorn-Premium-Protective-Resistant/dp/B01KK8TZMU/

I have and can recommend this case. It's durable, has a good grippy texture on the sides, and covers the bottom of the phone.

I also have and can recommend this glass screen protector.

It's a full edge to edge glass screen protector that covers the notch. The kit it comes with makes it simple to install. Besides the very slightly misaligned ear piece, I honestly can't tell I'm using a screen protector.

My favorite case is the Diztronic Slim Fit TPU case. I don't like bulky cases so it suits my needs perfectly. I also use a tempered glass screen protector so I don't have to worry about using the slim case.

I have an iPhone XS regular size.

To charge I have an Anker wireless charging mat that sits on my bedside table. Its connected to an Anker 39 watt brick with 2 usb slots. My watch charger is plugged into the other slot. I'm not sure if the charging mat is capable of fast charging, but it doesn't really matter because I put my phone on the mat at night and when I leave to workout (s3 cellular watch, thing is awesome) so I never really get to a point where I'm hurting for battery.

In the car I use this Kenu wireless charger. I kinda splurged a bit on the car one, but whatever. In the past I would have it sit on my leg and it would sometimes fall off and generally be a pain in the ass, so the fact that it holds it up is great. Benefit of upgrading from a touchid phone to a face id phone with this kind of setup is that you just have to tap the screen and it wakes up and a glance unlocks for any notifications.

I'm doing my best to embrace this wireless future. If I gotta spend a little extra to get there, that's cool with me.

You need an apple USB C to lightning cable and a power brick that supports USB-C PD to get true fast charging on an iphone.

Here's an anker product that supports the iphone https://www.amazon.com/dp/B06Y427WT7/ref=as_li_ss_tl?ie=UTF8&linkCode=sl1&tag=vergeopt-20&linkId=3624200607574092b1d7adee5bef98bd&language=en_US

What you linked is better than the brick that came with your phone at least. You could also use an ipad charger if you have one.

I have this for my 5s and absolutely love it.

iPhone 6 Plus (5.5 inch ONLY) HD Clear Ballistic Glass Screen Prote... http://www.amazon.com/dp/B00NGMVD8W/ref=cm_sw_r_udp_awd_c29Dub0QWMY1H

iPhone 6 (4.7 inch ONLY) HD Clear Ballistic Glass Screen Protector,... http://www.amazon.com/dp/B00EL94RQE/ref=cm_sw_r_udp_awd_Q29Dub17WVBX3

Thanks for the suggestion, but im pretty sure im going to get this one
http://www.amazon.com/GOgroove-FlexSMART-Bluetooth-Transmitter-Hands-Free/dp/B003PPGOC0/ref=sr_1_1?s=mp3&ie=UTF8&qid=1418791186&sr=1-1

I'm using the Spigen Neo Hybrid and it's pretty awesome. Check it out on Amazon.
http://www.amazon.com/Spigen%C2%AE-METALLIZED-Protective-Gunmetal-Protection/dp/B00LLGLR18/ref=sr_1_2?ie=UTF8&qid=1411655925&sr=8-2&keywords=spigen+iphone+6%2B

I currently use the Tethys glass screen protector for my 11 Pro Max. It basically overs the whole front, even the notch, and it fits well with my case. Face ID works normally and gestures work fine. I sometimes don’t notice it’s even there. Comes with a pack of three for a pretty good price.

Here’s one for the iPhone 11 Pro: https://www.amazon.com/dp/B07D6XR7FM/ref=cm_sw_r_cp_api_i_XaJIDbPDA8JW4

For years I have been the guy friends and family go to for screen protector installs because I've gotten good at it. I have to say that Spigen EX Fit https://www.amazon.com/Spigen-Tempered-Protector-Installation-Designed/dp/B07HRYZFN3 make installs so foolproof that anyone can do it. Just make sure the screen is clean and install is really that simple.

Thanks for the review as I'm always curious but I also wanted to put this out there that everyone should consider this.

I would suggest going with a Spigen screen protector. It comes with a nice alignment tool and I've found it feels pretty good.

My wife is using the Incipio NGP, we both really like it. Feels good, easy to get on and off. It's too thick on the bottom to dock on my stereo, though, so I've been using a good ol' super-cheap TPU case, which is almost thin enough on the bottom. I have to stick a shim behind it, then it docks. I ordered an Otterbox Commuter before the page said it doesn't work with 4S; it fit mine just fine, it's just a huge pain in the ass to get on and off. The white part is squishy and the green part is hard, it takes a lot of finagling.

Until someone comes out with a good curved screen protector, I'm sticking with my Tech Armor Ballistic. $10ish on Amazon and it gets the job done well. Tight tolerances on the sides though. Link: iPhone 6 Plus (5.5 inch ONLY) HD Clear Ballistic Glass Screen Protector

I don't think I've ever seen one that does that... But regardless, I use this glass protector and love it. The margin of error for applying it perfectly is pretty thin though, but that's what you want out of a well made product.
http://www.amazon.com/gp/aw/d/B00EL94RQE/ref=mp_s_a_1_1?qid=1419798373&sr=8-1&dpPl=1&dpID=51giKFi6dJL&ref=plSrch&pi=AC_SY200_QL40

https://www.amazon.com/gp/product/B00NGMVD8W/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 I got this and I was more than impressed. Heavy duty, and they have detailed instructions on how to install it.

No bubbles, what so ever. Just be careful obviously not to touch the adhesive. I thought I had, but it went away within hours. It's been about 3 days and still looking great.

You may be interested in this then:

https://www.amazon.com/SoundBot-Bluetooth-Hands-Free-Wireless-Streaming/dp/B00RH29CJO/ref=sr_1_7?ie=UTF8&qid=1473376902&sr=8-7&keywords=aux+bluetooth

Turns your AUX into Bluetooth, gives you media controls off your phone, and has a better mic for driving than the phone's built in mic. All for under $20. I've been using one in my car for a couple years because it is, in my opinion, a nicer experience than using AUX. It turns on when your car turns on and off when your car turns off.

That actually sounds great to me, do you think this one would work? I couldn’t find mryes on there, is it a better brand?

I have this Spigen case and absolutely love it. It has just the right amount of non-slip resistance to be comfortable in the hand but doesn't interfere with putting it in a tight pocket. Also ridiculously thin but feels strong.

This is a really nice case. I have been using this one since about June, and it has protected my phone really well.

I bought the [SUPCASE Unicorn Beetle](http://www.amazon.com/dp/B00MOOFHQ2/ref=cm_sw_r_udp_awd_Pqvcvb0PMVQTM
http://www.amazon.com/dp/B00MOOFHQ2/ref=cm_sw_r_udp_awd_Pqvcvb0PMVQTM) and use the [Tech Armor Ballistic Glass](http://www.amazon.com/dp/B00NGMVD8W/ref=cm_sw_r_udp_awd_7rvcvb0GVDE43
http://www.amazon.com/dp/B00NGMVD8W/ref=cm_sw_r_udp_awd_7rvcvb0GVDE43) for a screen protector. I love it. Definitely slimmer than the Defender.

Get yourself one of these car Bluetooth adaptors for $20, zero effort to connect disconnect. Turn car on, automatic connect. Turn car off, automatic disconnect. No mess, no fuss.

I used to be major frustrated with the previous car Bluetooth device I was using that required me to press buttons to connect disconnect, but now I'm super happy with the SB360.

iPhone 6+ Case

iPhone 6+ glass screen protector

I have this combo on my phone, it looks great and feels sturdy. You can get both for about $30. Which is cheaper than a first party apple iPhone case.

Just an FYI: you can use any usb-c charger that supports the PD 30w format, but apparently only the Apple usbc to lightning cable will support fast charge (I bought this Anker charger) and another cable and didn’t get fast charge until I got the Apple cable). Also, if you can wait I found an Apple cable on Amazon for about half price ($15).

Yes I’m using a Spigen Rugged Armour case and it works perfectly. Must add though to get the full 7.5w charging when 11.2 lands you’ll need to get a charging brick to match. I got the Anker one to go with it

https://www.amazon.com/dp/B01KJL4XNY?ref=yo_pop_ma_swf

Wireless Charger, Anker Fast Charge Qi Wireless Charging Pad PowerPort Qi 10 for Apple iPhone 8 / iPhone 8 Plus / iPhone X, Galaxy S8 / S8 Plus / S7 / S7 Edge, S6 / S6 Edge and All Qi-Enabled Devices https://www.amazon.co.uk/dp/B01KJL4XNY/ref=cm_sw_r_cp_api_L3.gAb13ZTS52

I'm currently using this Spigen case, and it works great for me. It's very slim and offers minimal protection from falls, but adds very little bulk as well. The case itself is hard plastic with a soft touch/rubbery coating. It makes gripping the phone much easier.

I have the diztronic and like it pretty well
http://www.amazon.com/Diztronic-Matte-Black-Flexible-iPhone/dp/B00NETYY60

$50 is more than enough for a wireless charger; it shouldn't cost that much.

I like this one. It's from Anker so it's quality, and it is wireless fast charge capable. When Apple updates the X to support fast charging, you are covered:

https://www.amazon.com/gp/product/B01KJL4XNY/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

There is also a cheaper version without the fast charging:

https://www.amazon.com/dp/B00Y839YMU/ref=psdc_12557639011_t1_B01KJL4XNY

TOZO for iPhone X Screen Protector Glass [ 3D Full Frame ] Technology Premium Tempered 9H Hardness 2.5D PET [Soft Edge Hybrid] Super Easy Apply for iPhone 10 / X [Black Edge] https://www.amazon.com/dp/B07597BPQT/ref=cm_sw_r_cp_api_hoE.zbQDBPED4

iPhone 6S Screen Protector, Tech Armor Apple iPhone 6 (4.7 inch ONLY) HD Clear Ballistic Glass (.3mm) - Maximize Resale Value - 99.99% Clarity and Touchscreen https://www.amazon.com/dp/B00EL94RQE/ref=cm_sw_r_cp_awd_1MF8wbVR46ZFX

Here's how I did it with my Honda Accord that just an an aux port (no USB music option).

https://www.amazon.com/gp/product/B00RH29CJO/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

The great thing about this is how quickly it pairs to the phone. Just today I was listening to my headphones walking to the car, and as soon as I turned on the car the music went straight to the car audio system before I even went out of park or took out my headphones. I was able to hide the wires since my aux port is in the panel between the driver and passenger seats.

I consider myself picky with audio quality, and there is hardly any difference between this and my aux cord directly.

Highly recommended for people with older cars and want to have a bluetooth car set up for charging and music playback.

I bought the Samsung convertible. I liked how it can fold from flat to upright based on where I put it. It comes with the power adapter to support high speed wireless charging (7.5W). I also like how it is USB-C and wasn’t over the top with lights. I wished the light turned off but I put a piece of electrical tape to cover the light since I didn’t want it to bother me when I am sleeping. This one also has a fan.

It is a little more expensive than the cheap ones but was worth it to me.

https://www.amazon.com/gp/aw/d/B06XH4X7SZ/ref=cm_cr_othr_mb_bdcrb_top?ie=UTF8#cm_cr_carousel_images_section

My recommendation is to get a AUX to Bluetooth. It turns the aux in your car to Bluetooth, works really well. You just need a USB port in your car. I bought this and it works great: https://www.amazon.com/SoundBot-Bluetooth-Hands-Free-Wireless-Streaming/dp/B00RH29CJO

I recommend this one from Anker. I ordered 3 before my 8 arrived and I've been loving it.

Here's a list of the accessories mentioned in this thread (so far). [Note: I am not a bot. I may have made some errors.]

• Apple Leather Case
  
• Tech Armor Ballistic Glass Screen Protector
  
• TwelveSouth Hirise Dock
  
• UE MINI BOOM Portable Bluetooth Speaker
  
• Pebble Smartwatch
  
• Wahoo Fitness - Blue SC Speed and Cadence Sensor
  
• Power Support Air Jacket for iPhone 6
  
• Bose QuietComfort 25 Acoustic Noise Cancelling Headphones
  
• KAVAJ - iPhone 6 4,7" Case “Dallas” black
  
• Magpul Field Case – iPhone 6
  
• Kenu Airframe Car Mount
  
• LG HBS-900: LG TONE INFINIM
  
• iPhone 6 Leather Case - Midnight Blue - Apple Store
  
• Ballistic Glass Screen Protector | Tech Armor
  
• iClever Car Mount
  
• The Crown Screen Protector | BodyGuardz
  
• iOttie Easy One Touch 2 Car Mount
  
• Spigen Tough Armor Case
  
• Rhino shield
  
• Amazon Basics charging cables
  
• InfiniApps CD slot car mount
  
• Pluggy Lock
  
• Automatic GPS Golf Shot Tracking Platform - Arccos
  
• JBL Charge | Portable Wireless Bluetooth Speaker with USB Charger
  
• Gravitas - iPhone/iPad Dock | Henge Docks
  
• CandyShell iPhone 6 Case | Speck Products

I've been using this guy for about 5 years. You can connect the phoen to it via bluetooth, and then output to the stereo via AUX or via FM Radio transmission. Or if your car has bluetooth or FM Radio, but your phone only has a 3.5, you can connect the phone to it that way as well. And it has a nice USB port for charging.

So there's options.

I use this brand for both my X and Switch. As long as you put it on straight without any lint or bubbles it looks and feels like it's not even there. Highly recommend from someone who never used screen protectors before.

This one is the best: http://www.amazon.com/gp/aw/d/B003PPGOC0

If you're on a budget, the Griffin iTrip Universal is okay too.

I have been buying this brand of screen protector since my iPhone 5s and for my 6, 7, 8, XS ever since.

I buy a 3 pack, and replace them every 6 months. I care 0% if the screen protector cracks, because I always buy them in at least a pair.

https://www.amazon.com/Tech-Armor-Ballistic-Protector-Tempered/dp/B00EL94RQE

I also purchase their cases too, they are very reliable, slim, and easy to use.

I'm not sure about the exactly voltage/amperage the iPhone XS Max fast charges at (will do a test when I get my Apple USB-C to lightning cable and post pictures), but in essence you'll need a PD-compatible charger of at least 29W (which have USB-C outputs) like this one and the official Apple USB-C to Lightning Cable. There are some third-party fast-charge cables, but reviews about them seem mixed and they seem to get disabled every so often with iOS updates.

You shouldn't really have to think too much about voltage/ampere/wattage ratings on the chargers, for as long as they're PD certified, they will support the necessary output voltages.

MaxBoost has Amazon Prime shipping and 3 tempered glasses for $10 with a tool to help you align the protector.

link

As for cases... I have:

iPhone X Leather Case - Saddle Brown

link

iPhone X Silicone Case - White

link

Speck Presidio - Clear

link

Cloth Case (Recommended on Reddit)

link

Specifically this one:

http://www.amazon.com/Spigen%C2%AE-METALLIZED-Protective-Gunmetal-Protection/dp/B00LLGLR18/ref=sr_1_1?ie=UTF8&qid=1411168059&sr=8-1&keywords=spigen+iphone+6+plus

My friend got it. But I've heard other comments on this subreddit of people with other types of spigen cases and they all mention that it's a really tight fit.

Supcase Unicorn Beatle

I use this one, feels really good to hold and looks nice to look at.

Take a look at totallee on Amazon. Seems to be very thin and pricing is competitive. Comes with prime shipping as well. It will not protect from hard falls but it will prevent scuffing from minor falls. The scuffs will go on the case rather than your steel band. Spigen actually also has a super thin series that might offer some protection in a thin form factor, it’s grippy so you might actually drop your phone less

Spigen: https://www.amazon.com/gp/aw/d/B074CM9928/ref=psdcmw_3081461011_t2_B075RTYYQF

I have this and it works wonders in my car, even on long drives. It supports Bluetooth and an aux cable, and the sound quality is fantastic. If you're using Bluetooth you can also answer calls, dictate texts with Siri, etc. Way cheaper than getting a new head unit, especially if you have trouble finding one that will fit in your car.

link to the case you're talking about.

link to the best selling cases/covers on amazon.

I snagged myself this adapter on amazon based on the recommendation here earlier this week, and I’ll have to grab an Apple USB C to Lightning cable. From everything I’ve read, the different isn’t too great and the fast charging turns itself off at 80% anyways.

Got this one with great reviews. I checked the reviews on fakespot and it says the reviews are 90% genuine. https://www.amazon.com/Protector-Maxboost-Tempered-Protectors-Accurate/dp/B073DLZWX7

I messed up the first one, but then I with the second figured out how to do it and get it to look perfect. No bubbles and a 99% perfect fit. Still have one extra since it’s a 3 pack.

I prefer to have a cutout for the camera area and I’ve been using iPhones and screen protectors since the iPhone 4S. I’ve never had any damage to the camera area. That way there aren’t any light reflections or etc messing with the light sensor, Face ID, and the selfie camera.

I would avoid this one because the cut out for the notch is wrong. https://www.amazon.com/iPhone-Protector-amFilm-Tempered-Installation/dp/B074ZNLM9J

Not sure if best but im happy with this for my midnight green 11 pro:

Spigen Ultra Hybrid Designed for... https://www.amazon.com/dp/B07T3PTHKG?ref=ppx_pop_mob_ap_share

Spigen Tempered Glass Screen... https://www.amazon.com/dp/B07HRYZFN3?ref=ppx_pop_mob_ap_share

Spigen Rugged Armor


https://www.amazon.com/dp/B01GIWGAAC/ref=cm_sw_r_cp_api_dpaxyb2JM9MT4

Thin form factor, great all around protection, looks sleek on the matte black iPhone. You won't be disappointed.

I hate any and all cases that have a window for the Apple logo. I don't know why that caught on.

I have an Incipio NGP and it's the best case for me. I love it.

This is what I own and I really like it, could be a tad thinner maybe.
http://www.amazon.com/Incipio-Case-iPhone-4S-Matte-Black/dp/B003SX0P1A/ref=sr_1_2?ie=UTF8&qid=1344918515&sr=8-2&keywords=incipio+iphone+4+case

I don't know what you mean by skin on the sides, like a sticker? I haven't skinned a phone before.

I got this screen protector for my 11: https://www.amazon.com/Spigen-Tempered-Protector-Installation-Designed/dp/B07HRYZFN3/ref=sr_1_2?crid=3CV7LEMK93P1R&keywords=spigen+iphone+11+shield&qid=1572569998&s=electronics&sprefix=spigen+iphone+11+sh%2Celectronics%2C164&sr=1-2

Makes putting it on pretty painless.

I also got this case: https://www.amazon.com/TOZO-Thinnest-Protect-Semi-Transparent-Lightweight/dp/B07WHCKFP8/ref=sxin_2_ac_d_pm?ac_md=1-0-VW5kZXIgJDEw-ac_d_pm&keywords=iphone+11+thin+case&pd_rd_i=B07WHCKFP8&pd_rd_r=ade1fe61-9a57-4575-aa7e-b3a7db26e58b&pd_rd_w=PWS69&pd_rd_wg=eT18K&pf_rd_p=02e79b16-eab7-4369-852f-d04a58a4d9b5&pf_rd_r=XRMZHT5T30C7WCT46VJ3&psc=1&qid=1572570052&s=electronics

It doesn't offer much in drop protection as it's VERY thin. It's so thin it doesn't feel like there's even a case on the phone. But it's fine for protecting from scratches and things.

I got this one by Spigen. Seems like it has enough protection and is sleek enough to compliment the large size of the 6 plus.

TETHYS Glass Screen Protector Designed for iPhone XS & iPhone X [3-Pack] [Edge to Edge Coverage] Full Protection Durable Tempered Glass for Apple iPhone XS & X [Guidance Frame Included] (Pack of 3) https://www.amazon.com/dp/B07D6XR7FM/ref=cm_sw_r_cp_api_m2wQBbDS12Y6M

So far loving it! Can hardly tell it’s there.

Meh I have the same issue with most clear cases... they simply look cheap and shiny. Supcase typically look good https://www.amazon.com/Supcase-Unicorn-Beetle-Scratch-Resistant/dp/B01KK8TZMU/

I’ve bought 5 of these flat Anker ones, you have to put the middle of the phone on the pad, but I find that I never mis-position it. Got 3 at home, 1 at work and 1 at my fiancé’s work:

https://www.amazon.co.uk/Anker-Wireless-Qi-Certified-Charging-Fast-Charging/dp/B01KJL4XNY/ref=mp_s_a_1_6?keywords=wireless+charging+anker&qid=1557497161&s=gateway&sr=8-6

Never had an issue, been going strong for about 5 months.

I know some pretty clumsy people who drop their phones often and have pretty fucked up screens. They still say "I just don't like the way screen protectors feel" while scrolling their finger across jagged sharp glass. I don't think everyone needs a screen protector, but some absolutely do.

Beforehand, I only went with an Otterbox Statement case which had a raised enough lip to not worry about screen cracks from dropping. I only recently started using screen protectors because I use a wallet case now and would rather not my cards scratch up my screen. The screen protector I use, you can't really tell it's on though (no notch cutout, and outer part of the protector is black), and feels much better than previous screen protectors I used on older phones.

I use ballistic glass screen protector here -> http://www.amazon.com/gp/product/B00NGMVD8W?psc=1&redirect=true&ref_=oh_aui_detailpage_o03_s00

So far it's great esp for $8.95

Went with Tech Armor. My whole family uses them and great reviews. With a relatively inexpensive price. In total about 13 dollars with shipping to my house so not a bad choice.
LINK! https://www.amazon.com/gp/aw/d/B00NGMVD8W/ref=mp_s_a_1_1?ie=UTF8&qid=1473650708&sr=8-1&pi=SY200_QL40&keywords=tech+armor+iphone+6s+plus&dpPl=1&dpID=51-aGhsFe-L&ref=plSrch

That one is very elegant, but there are other solutions available at Amazon.

e.g.

I've got two Tech Armor glass protectors for the 6+. They seem to be working out great. I paid 7.99 each at Amazon with the promo code PLUSBIRD at checkout. They have a lifetime warranty as well, just like Zagg. http://smile.amazon.com/gp/product/B00NGMVD8W/ref=smi_www_rcolv2_go_smi?ie=UTF8&ascsubtag=938ffdd69bc04d9eba22cf6c78ac1f14&redirect=true&t=slickdeals&tag=slickdeals

edit: I see it says they will be released Oct 7, but I ordered mine a little over a week ago and that message was not up at the time.

You need the Apple USB-C to lightning cable. The only one that appears to really work.

Here is the charger I’ve been using. Works perfectly.

https://www.amazon.com/Anker-Charger-Delivery-PowerPort-Samsung/dp/B06Y427WT7?crid=T738UX3NI9VA&keywords=anker+29w+usb-c+power+adapter&qid=1538319593&sprefix=anker+29w+&sr=8-1&ref=mp_s_a_1_1

I use these and love them because they cover the notch.

TETHYS Glass Screen Protector... https://www.amazon.com/dp/B07D6XR7FM?ref=ppx_pop_mob_ap_share

Anker USB Type-C with Power Delivery 30W USB Wall Charger, PowerPort Speed 1 for Nexus 5X / 6P, LG G5, Pixel C, Samsung W700, MacBook 2015 / 2016, Mat https://www.amazon.com/dp/B06Y427WT7/ref=cm_sw_r_cp_apip_QNqmTE57bR9Rw


Here’s the link for the charger. It has a indicator light on it but it’s worth the cheaper price opposed to the Apple charger.


Edit: looks like its back ordered until November 5th. Sorry guys

I just bought the Spigen Neo Hybrid for the 6 Plus. Seen a few on here from other users and it looks great. $12.50 right now.

SoundBot SB360 Bluetooth 4.0 Car Kit Hands-Free Wireless Talking & Music Streaming Dongle w/ 10W Dual Port 2.1A USB Charger + Magnetic Mounts + Built-in 3.5mm Aux Cable https://www.amazon.com/dp/B00RH29CJO/ref=cm_sw_r_cp_api_WVkoybDZ39KBY

I have the Belkin version of this in my car, works great.

https://www.amazon.com/dp/B07597BPQT?ref=yo_pop_ma_swf this is the one I have and it works great so far, had it since day one.

Check out TETHYS on Amazon. For the X it’s $7.99 and comes with 3 protectors and a guidance frame for application. I ordered them for my XS Max and couldn’t be happier.

https://www.amazon.com/Protector-Designed-Coverage-Protection-Tempered/dp/B07D6XR7FM/ref=mp_s_a_1_1?ie=UTF8&qid=1538719114&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=tethys+iphone+x+screen+protector&dpPl=1&dpID=51qzx2KMvtL&ref=plSrch

I just got this Samsung Fast Charge Wireless Charging Convertible Stand. People say it’s good and works well with the 8.

https://www.amazon.com/dp/B06XH4X7SZ/ref=cm_sw_r_cp_api_lyO-zb5CDTNGV

Personal preference really. I have this one and am very happy with it:

https://www.amazon.com/Samsung-Wireless-Charging-Convertible-Warranty/dp/B06XH4X7SZ

Maxboost Screen Protector - $10.99

• Tempered glass sceen protector because the soft plastic ones get dirty/stained and peel off after a while. Trying tempered glass for the very first time.
  
  Spigen Liquid Crystal - $10.99
  
  
• Clear because the phone looks great naked.
  
• I don't like how thick this one is but if I go thinner like the Spigen Air Skin it is no longer transparent.

I got this one as recommended by the Wirecutter. It comes with an alignment tool but it’s tricky to get right. I haven’t dropped my phone or anything to tell you how durable it is but it seems great and I forget it’s there when using the phone

I got This one. I've only had it on a few hours, but it feels nice. Very similar to the naked screen.

Buy this one, it comes with a guide to lay on the phone for perfect alignment. Here.

Not exactly the same, but I really like the Diztronic cases..

https://www.amazon.com/iPhone-Diztronic-Matte-Slim-Fit-Flexible/dp/B00NETYY60/ref=sr_1_1?ie=UTF8&qid=1482339352&sr=8-1&keywords=diztronic+iphone+6&refinements=p_89%3ADiztronic

http://www.amazon.com/gp/product/B00JH87ZSQ/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Got that with this...

http://www.amazon.com/gp/product/B00JH87X3S/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1

Also I'm purchasing Apple Care for piece of mind.

I bought this one on amazon for $10 and it comes with an alignment tool which is nifty.

I didn’t get it 100% perfect but I think it’s more because I wasn’t paying attention to what I was doing...

I've always liked Anker products and they have one on Amazon Anker Wireless Charger Charging Pad for iPhone 8 / 8 Plus, iPhone X, Nexus 5 / 6 / 7, and Other Devices, Provides Fast-Charging for Galaxy S8/ S8+/ S7 / S7 edge / S6 edge+, and Note 5 https://www.amazon.com/dp/B01KJL4XNY/ref=cm_sw_r_cp_api_RoUVzb1EFWSDQ

It was this one. When I ordered, it got backordered, but it looks like it's gone now.

This is the one I'm rocking, it's pretty minimalist.

http://www.amazon.com/Spigen®-Non-Slip-Perfect-Fit-Premium-Excellent/dp/B00JH87ZSQ/

Best screen protector and warranty I have ever come across. Other companies I have experimented with don't even come close. I personally go with the matte screen because I like the anti-glare function
http://www.amazon.com/Tech-Armor-Anti-Glare-Anti-Fingerprint-Protectors/dp/B00MFHR25C/ref=sr_1_1?s=wireless&ie=UTF8&qid=1416162795&sr=1-1&keywords=tech+armor+iphone+6+matte
____
As for case, I like something minimal with full-body coverage. I personally use this one but my only gripe is that the raised edges on the front of the screen are a bit too raised for my taste and affect swiping functionality. For example, if you're using AlienBlue and want to swipe to return to a thread, sometimes it doesn't register cause the raised edges block the edge of the phone. I like the curved screen of the iPhone 6 and this kind of eliminates feeling the curviness.

I'm thinking about getting this one cause I saw it in person and it looked very nice, but that price tag :(

Oh alright. Well here it is just in case:

TETHYS Glass Screen Protector Designed for iPhone XS and iPhone X [Edge to Edge Coverage] Full Protection Durable Tempered Glass for Apple iPhone XS and X [Guidance Frame Included], Pack of 3 https://www.amazon.com/dp/B07D6XR7FM/ref=cm_sw_r_cp_api_i_vMT2CbE4FXRQW

I've got a 2000 Wranger TJ that I absolutely refuse to make any modifications to the "look" of the head unit, however I do have a modified head unit with an AUX input that has been adapted into it.

Found this today:

https://www.amazon.com/SoundBot-Bluetooth-Hands-Free-Wireless-Streaming/dp/B00RH29CJO/ref=s9_simh_gw_g107_i1_r

Seems like it'll do the trick for me (:

Or you could go for actual cheap wireless charging. I'm using this and have been really happy...

iPhone Qi Receiver, LANIAKEA 1A Qi Wireless Charging Receiver Lightning Port Module for iPhone 7/ 7 Plus, iPhone 6/6 Plus/6s/6s Plus- Make All iPhone Universal to Qi Wireless Charger https://www.amazon.com/dp/B019MKBU98?ref=yo_pop_ma_swf

Add a charging pad and your good to go.

Anker Wireless Charger Charging Pad for iPhone 8 / 8 Plus, iPhone X, Nexus 5 / 6 / 7, and Other Devices, Provides Fast-Charging for Galaxy S8/ S8+/ S7 / S7 edge / S6 edge+, and Note 5 https://www.amazon.com/dp/B01KJL4XNY?ref=yo_pop_ma_swf

And for the car I'm using this mount:

Wireless Car Charger Mount,YSSKTC Gravity Linkage Charging for iPhone X, 8/8 Plus Samsung Galaxy S8, S7,S6/S7 Edge, Note 8 5 & Qi Enabled Devices https://www.amazon.com/dp/B078RQHNLJ?ref=yo_pop_ma_swf

In my car I didn't like the mount points so I added this ball mount

IG-PSTARA x 2: i.Trek Lot of 2 Car Dash Adhesive Sticky Mount for all Garmin Nuvi GPS https://www.amazon.com/dp/B00BLSBYPK/ref=cm_sw_r_cp_api_.8RYAb5NSQJ0T

I currently use this fast wireless charger. Should I get the new Anker one instead or is the one I have the same / better?

I use this FM Transmitter and it is hands down the best I've had.

http://www.amazon.com/gp/product/B003PPGOC0/ref=oh_details_o04_s00_i00?ie=UTF8&psc=1

With my old iTrip and Belkin transmitters I would always have to hold onto it to get a decent signal. The only problem is that the one I have now was pricier, depends how much you want to spend.

It's .4 thicker lol I think SPIGEN comes closer to the feather https://www.amazon.com/dp/B00JH87ZSQ/ref=cm_sw_r_awd_jEimub1TV9K8A

What double chimes? I'm running ios11.1.1
And also I'm using Anker USB Type-C with Power Delivery 30W USB Wall Charger, PowerPort Speed 1 with a USB-C to lightening cable.

I'm assuming this is 'fast charging' as its definitely charging at light speed..

Is this a good one?

iPhone 6 Plus (5.5 inch ONLY) HD Clear Ballistic Glass Screen Prote... http://www.amazon.com/dp/B00NGMVD8W/ref=cm_sw_r_udp_awd_S3tzub047D028

Supcase Unicorn Beetle Hybrid Scratch Resistant Clear Bumper Case for Apple iPhone 7 Plus - Black https://www.amazon.com/dp/B01KK8TZMU/ref=cm_sw_r_cp_api_0iUoyb6M47YVN

I bought these this morning

SUPCASE Unicorn Beetle Hybrid Protective Clear Case for Apple iPhone 7 Plus - Black https://www.amazon.com/dp/B01KK8TZMU/ref=cm_sw_r_cp_api_8AjAyb244NV9Q

OMOTON iPhone 7 Plus Screen Protector [2 Pack]- [9H Hardness] [Crystal Clear] [Bubble Free] [3D Touch Compatible] Tempered Glass Screen Protector for Apple iPhone 7 Plus https://www.amazon.com/dp/B01JBTPHJ4/ref=cm_sw_r_cp_api_XBjAyb6TTAP3A

Something basic works for me

Supcase Unicorn Beetle Hybrid Scratch Resistant Clear Bumper Case for Apple iPhone 7 Plus - Black https://www.amazon.com/dp/B01KK8TZMU/ref=cm_sw_r_cp_apip_ewNBLxLssittb

Maxbost Screen protector, it will protect you screen against you cumming on it

It seems that your comment contains 1 or more links that are hard to tap for mobile users.
I will extend those so they're easier for our sausage fingers to click!


Here is link number 1 - Previous text "one"



----
^Please ^PM ^/u/eganwall ^with ^issues ^or ^feedback! ^| ^Delete

Diztronic case is like midway between the roundness of 6 and flatness of 5.

http://smile.amazon.com/Diztronic-Matte-Black-Flexible-iPhone/dp/B00NETYY60/ref=sr_1_1?ie=UTF8&qid=1422653514&sr=8-1&keywords=diztronic+iphone+6

I like this one. The matte black one is a little grippy, the other colors are more smooth (and slippery to me).

In order to fast charge your iPhone properly, you'll need a USB-C power adapter with power delivery:

https://www.amazon.com/dp/B06Y427WT7/ref=cm_sw_r_cp_api_xds5BbPP28G73

It's also necessary to get a lighting to USB-C cable (preferably an official Apple cable):

https://www.amazon.com/dp/B01DGYJBQA/ref=cm_sw_r_cp_api_-hs5BbFA5KK79

However If you don't want to spend the money for an Apple cable, make sure you get a cable from a reputable brand.

You can also try something like this if you don't want to worry about keeping another device charged.

I don't use an armband, (the 6+ would make my arms look small) lol Instead I have a tight fitted cycling jersey, which has a zippered on the side, my 6+ is in it's regular case, so I don't have to do any case/ armband switching.

http://www.mec.ca/product/5035-904/race-face-ambush-long-sleeved-jersey-mens/?h=10+50002+50020+50089&f=10+50002+50089+50122

http://www.amazon.ca/Spigen®-METALLIZED-BUTTONS-Protective-Gunmetal/dp/B00LLGLR18/ref=sr_1_5?ie=UTF8&qid=1412517641&sr=8-5&keywords=iphone+6+plus+case

Have been on four runs so far, about 1h30mins each.
There has been no bending

I bought this for my and the lady’s phones. 3 pack for under $10 is a killing and they’re very nice!

iPhone X Screen Protector Glass (3-Pack), amFilm iPhone X Tempered Glass Screen Protector with Easy Installation Tray for Apple iPhone X / iPhone 10 ( https://www.amazon.com/dp/B074ZNLM9J/ref=cm_sw_r_cp_apip_q9y27qMtaZLrx

As long as you buy a Qi charger or wireless charger that has higher watt outputs yes. Most of those wireless chargers don’t go higher than 7.5W. I found this one
https://www.amazon.com/dp/B01KJL4XNY/ref=cm_sw_r_cp_api_UJk-BbP768BW

Which says it’s 10W but I haven’t seen any wireless chargers that are higher than that.

Reminder that iPhone 7 Plus cases work as the dimensions are similar, so when searching you can look up iPhone 7 Plus, as some case makers may not have changed their titles yet.
My personally favorite for my 7 was:

https://www.amazon.com/dp/B01KK8TZMU/ref=cm_sw_r_cp_api_cRkZzb4MKSAXD

https://www.amazon.com/dp/B01N9D7DP2/ref=cm_sw_r_cp_api_-RkZzbGBYTN74

Not sure of the exact specifications of thickness allowed for wireless charging but these are fairly thin

this is a thing. i own two and they work flawlessly.

https://www.amazon.com/dp/B00RH29CJO/ref=cm_sw_r_cp_api_v4G0xb5XS10DW

I’ve used cheap and expensive protectors and I haven’t noticed any differences. I’m currently using a Maxboost protector that’s been on my XS since last November and it works flawlessly.

Maxboost Screen Protector for... https://www.amazon.com/dp/B073DLZWX7?ref=ppx_pop_mob_ap_share