Best products from r/jetski
We found 23 comments on r/jetski discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 20 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Thexton THE404 Spark Tester
- package height : 11.988 cm
- package length : 3.378 cm
- package width : 8.483 cm
- Product type : AUTO ACCESSORY
Features:
2. XPS 4 Stroke Synthetic Blend Engine Oil 5W-40 - Gallon - Can Am Spyder Sea Doo 779134 / 293600122
XPS synthetic 4-stroke oil is specifically engineered to meet the particular lubrication requirements of Can-Am, Spyder and Sea-Doo vehicles equipped with Rotax 4-TEC 4-stroke engines.Powersport formula with premium anti-wear and anti-corrosion additivesDesigned for high-performance off-road, on-roa...
3. Sea Doo Steering & Reverse Cable Lock Nut Removal Install Tool 295000145
New Sea-Doo Cable Lock Nut Removal ToolUse this tool to remove the steering and reverse cable lock nutFits all years & modelsReplaces Sea-Doo OEM# 295000145Exact item pictured
4. CRC 06026 Heavy Duty Corrosion Inhibitor, 10 Wt Oz
- Included Components: Crc 06026 Heavy Duty Marine Corrosion Inhibitor - 10 Oz.
Features:
5. Hemostat Clamp, Curved 24"
Serrated jaws provide vise like grip when lockedConstructed of stainless steelLength: 24"Curved tipVersatile tool, great for hobbyists
6. Impeller Protector PWC Shock Tube, 24"
- Keep ski ropes away from your PWCs impeller
- Protect passengers from ski rope kick-back
- Black nylon covers the closed cell foam tube
- Length: 24 inches
Features:
7. Mikuni 14-1076 Needle Valve Square Pump 1.5
- Made by Mikuni
- Mikuni # 786-35015
- 38-46mm Square Pump Super BN watercraft carbs.
Features:
8. Mikuni Super BN Rebuild Kit MK-BN38/44 SPR
All parts needed for complete rebuild (except needle valve)Fits either 38 or 44/46mm Super BN and High Performance BN carbs; four-screw pump covers
9. Teva Men's Gnarkosi Water Shoe,Neon Lime,8 M US
- Lace-up water shoe featuring quick-drying mesh upper with perforations and rear pull loop
- Extensive drainage systems
- Nylon shank
- EVA foam midsole
- Spider Rubber outsole for traction and durability
Features:
10. Best Choice Products 1000lb Marine Dock Slip Watercraft Cart Boat Storage Dolly Stand
- ENOUGH ROOM - The full set-up size of the tent is 140" X 70"X 79" (L x W x H). It can accommodate up to 8 people.
- HIGH QUALITY - Sturdy fiberglass frame is strong enough. 300D quilted interlayer provides a warm shelter to keep you from cold wind.
- LIGHTWEIGHT & PORTABLE - Weight 42 lbs. light and easy to assemble. The design of a carry bag makes it can be taken wherever you go.
- SET INCLUDE:1 ice shelter,12 ice-anchors, 6 two-meter guy ropes, 12 transparent PVC windows and a 51" long carrier bag. No floor.
Features:
11. Goplus Watercraft Dolly PWC Boat Watercraft Cart Jet Ski Stand, 1000 Capacity
★ Designed with four 360 degree rolling pivoting casters, two of four have foot operated brakes.★ Has 1000-lb weight capacity, ideal for personal watercraft vehicles, Jet Ski, Sea Doo, Jon boats, wave runners, dinghies, inflatables.★ Made from galvanized steel construction for long-term durabi...
12. Screw Anchor System
- Perfect for anchoring PWC in shallow water just off the beach
- Screw the zinc-plated anchor into compacted sand or mud in 2-3 ft. of water
- Padded nylon storage case protects watercraft & dampens noise while stowed
- Giant nylon snap hook at each end
- 8 ft. Long marine grade rope
Features:
13. BOSS Audio Systems ATV20 Powersports Plug and Play Audio System with Weather Proof 6.5 Inch Component Speakers - Discontinued by Manufacturer
- Weather Proof 6.5" Poly Injection Cone Speakers
- Weather Proof 1.5" High Performance Soft Dome Tweeters
- 450 Watts Max Built-in Amplifier and 3.5mm Aux Input Compatible with Audio Output of Smartphones and MP3 Players
- Polypropylene Carbon Cone Woofers with Rubber Surround and PIE Soft Dome Tweeters
- Frequency Response - 45Hz - 25kHz
- Plug and Play for Easy Installation and Removal
- Ideal for ATV's, UTV's, Side by Sides and Tailgating!
- 3 Year Platinum Dealer Warranty
- Water Proof Poly Injection Cone, Soft Dome Diaphragm high performance Tweeter
- Fully Marinized, 450W Max Power
- Frequency response: 45-25kHz.Please refer user manual attached below for instructions and troubleshooting steps.
Features:
14. ABN Rubber Eraser Wheel 4in Pad & Adapter 1-Pack – Pinstripe, Adhesive Remover, Vinyl Decal, Graphics Removal Tool
- OBLITERATE DECALS: Use the ABN Rubber Eraser Wheel Adhesive Remover with Adapter 1-Pack to remove any vinyl, decal, graphic, double-sided molding tape, striping, and trim on your car, truck, or similar vehicle; 4-inch (10.2cm) diameter (larger than others!); Molded rubber medium density drill attachment tool with a stop use line; For use with electric drill with maximum 4,000 RPM (best results between 1,500 and 3,000) (Not for use on lacquer coatings and not effective on some reflective tapes)
- BETTER DESIGN: Solid round design is larger in size than other discs which makes this wheel fast, easy to control, plugs up less during use, and stays cool
- SAFE: Will not gouge or scratch acrylic enamel or urethane paint work; No need for dangerous and harmful chemicals; The wheel has a durable construction that withstands up to 4,000 RPM; The included 5/16” 24 hardware makes it compatible with any standard drill
- EASY TO USE: Apply light pressure starting at the top of the decal and moving side to side, or for faster results, use entire width of the wheel without tilting or angling; Remove any residue with appropriate mild solvent; Always use proper protective equipment when using power tools
- CONTENTS: Package includes (1) 4-inch round decal eraser wheel and (1) 5/16” 24 thread drill adapter arbor
Features:
16. Fox Distributing DF52-92 Mikuni Triple Fuel Pump
Fuel Pumps made by MikuniStyle: SquareOutlets: DualFlow Rate (LPH): 31
17. KONG 432497 Frog Carabiner (12-cm)
See DescriptionSee DescriptionSee DescriptionSee Description
18. ASICS Men's Matflex 5-M, Black/Silver, 10.5 M US
Lace Garage technology - A pocket enabling the laces to be tucked in and unexposed.Full Length Gum Rubber Outsole -
19. Body Glove Men's 4/3mm Vapor Slant Zip Fullsuit Wetsuit, XX-Large
- Should fit snug, but not too tight
- MATERIALS: 100-Percent vapor stretch water repellent technology throughout , 100-Percent fluid seal seams, thermo fiber from the chest down
- CONSTRUCTION: Vapor lock seams with 100-Percent interior Fluid Seal, Anatomically Cut, Unfinished wrist and ankle cuffs with fused edges and Double lock S-Seal wrist and ankles
- Interior elastic key cord
- Nano Tritec kneepads
- Slant zip chest entry and concealed left shoulder bib cinch for reduced water flushing
Features:
20. Anderson Metals Brass Garden Hose Swivel Fitting, Connector, 3/8" Barb x 3/4" Female Hose
- Adapter for connecting hose or fittings of different types
- Connects to hose on one end and a male GHT threaded connection on the other
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
Features:
Link for the tool https://www.amazon.com/dp/B07QQ39N9B?ref=ppx_pop_mob_ap_share
Link for the lock nut https://www.jetskiplus.com/seadoo-billet-reverse-cable-lock-nut-w-seal-gtx-rxp-rxt-gti-gts-xp-277001729 I didnt buy that exact one but something just like it may wanna shop around and get a better price I happen to get two (one for the reverse cable and one for the steering)
Good input from everyone! Thanks guys!
This ski is my baby and been with me for a long time, I'd love to keep it that way.
I know most of this is common sense to you guys and some items I already do, but I'm stuck in my ways and don't want to forget.
Just want to make sure I continue treating her right :D
​
Consensus seems to be:
​
- WD40 (inside hull/engine before riding & engine after if large water ingestion)
- Rinse, Rinse, Rinse! (Outside, inside, trailer, car)
- CRC heavy duty corrosion inhibitor (impeller, moving parts, metal that contacts salt water)
- found this Amazon - CRC Corrosion Inhibitor
- Flush (engine water jackets using hose hook up)
I could see spark on mine but when I got one of these
https://www.amazon.com/Thexton-THE404-Spark-Tester/dp/B0002STSBM
I found that it was actually a weak spark that just looked good. It probably wasn't sparking during at high compression when in the engine. I replaced the voltage regulator rectifier and I had nice strong spark. Unfortunately that doesn't seem to be the only problem for me so I am checking the timing next. But mine is another story.
??
Maybe per quart, but a gallon is more like $42
https://www.amazon.com/XPS-Stroke-Synthetic-Blend-Engine/dp/B076633RQV/ref=sr_1_1?keywords=seadoo+xps+5w-40&qid=1567039663&s=gateway&sr=8-1
Feed the rope through a pool noodle (or get something like this: https://www.amazon.com/Kwik-Tek-IP-24-Protector-24-Inches/dp/B0000ATYSE/) to help keep it up away from the jet pump area
You'll need 2 of these-
https://www.amazon.com/Mikuni-Super-Rebuild-Kit-MK-BN38/dp/B000GTWV84/ref=gp_aw_ybh_a_5?_encoding=UTF8&psc=1&refRID=KFCV0A8GQAVDWSPE4N0N
And 2 of these-
https://www.amazon.com/NEEDLE-VALVE-SQUARE-PUMP-1-5/dp/B000N5UV5Q/ref=pd_aw_fbt_263_img_2/140-1696610-9870930?_encoding=UTF8&pd_rd_i=B000N5UV5Q&pd_rd_r=d54162ab-60f4-4243-9bd8-f58d58c8f6e7&pd_rd_w=iTtdp&pd_rd_wg=AaeX0&pf_rd_p=3ecc74bd-d08f-44bd-96f3-d0c2b89f563a&pf_rd_r=P56QX8S4HY97FEW2WWX1&psc=1&refRID=P56QX8S4HY97FEW2WWX1
Excellent rebuild tutorial here-
https://www.seadooforum.com/threads/the-seadoo-carb-rebuild-thread.89199/
To piggy back off this piece of advice try looking up shoes for the water with the brand name teva. The ones i have inculded are what i wear they have awsome grip and never hold any water. They are also very light and rugged. Ive had mine for 4 seasons now and still going strong. http://www.amazon.com/gp/aw/d/B0084FM68W/ref=mp_s_a_1_29?qid=1463826474&sr=8-29&pi=AC_SX236_SY340_QL65&keywords=teva+water+shoes+men
I own a jet ski rental company and we use jet ski carts to move the skis around the shop, to and from the trailer, etc.
Here's an example. Not that expensive and they are well worth it.
I have this and it works great - http://amzn.com/B0000ATY60 all sand for me too... but you will get wet.
BOSS AUDIO ATV20 Powersports Plug and Play Audio System with Weather Proof 6.5 Inch Component Speakers (discontinued by manufacturer) https://www.amazon.com/dp/B004S50WZG/ref=cm_sw_r_cp_api_i_pNe8Ab0K7TR49
Don't even mess with trying to heat and peel decals that old. Use a drill and a rubber eraser wheel. Heat guns are for amateurs that don't know any better.
https://www.amazon.com/gp/aw/d/B018WG2XYE/ref=yo_ii_pd_dx_gr_1/188-7323185-1878014?ie=UTF8&pd_rd_i=B018WG2XYE&pd_rd_r=MYRGCVXK6K2NTR47WFW0&pd_rd_w=s6OIm&pd_rd_wg=NzRRH&psc=1&refRID=PK1A5W57D0GPM348SN3F
You can thank me later.
I use a couple of frog carabiners and detach the lines completely when I'm riding. They're a little pricy but they're fast and durable.
https://www.amazon.com/KONG-432497-Frog-Carabiner-12-Cm/dp/B003EM6Y5Q
You could siphon it out. It would take a while but there would be much less work involved.
http://www.amazon.com/Super-Siphon-Hose-Pack/dp/B000ZORJ1E
I wear a version of these.
https://www.amazon.com/gp/aw/d/B00Q77UUEQ/ref=mp_s_a_1_1?ie=UTF8&qid=1506564611&sr=8-1&pi=AC_UL420_SR280,420_FMwebp_QL65&keywords=asic+wrestling+shoes
The mikuni triple? Does this work?
Fox Distributing DF52-92 Mikuni Triple Fuel Pump https://www.amazon.com/dp/B00336EBGW/ref=cm_sw_r_cp_apa_i_FQumDbQM1VYC4
Ok I got a 4/3 for a killer deal. Its a Body glove 4/3 slant. I think its a couple hundred dollar suit.
https://www.amazon.com/Body-Glove-Fullsuit-Wetsuit-XX-Large/dp/B009VVFWFW/ref=sr_1_17?s=outdoor-recreation&ie=UTF8&qid=1503089326&sr=1-17&keywords=4%2F3+wetsuit&refinements=p_8%3A2229060011%2Cp_36%3A1253557011
I just use one of these with a cap screwed in