Best products from r/multirotor
We found 7 comments on r/multirotor discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 6 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. RAYSUN 10 Pack 30cm 3Pin Male to Female JR Servo Extension Wire KK MWC Eagle Control Board - 22# Cord
- INSTANT COOLING RELIEF Run under water for one minute or until saturated, wring out excess water for drip free cooling
- LONG LASTING Can last for up to 4 hours on a single soak. Simply re-wet to increase cooling duration
- HOW DOES IT WORK? Cooling PVA material absorbs water and creates a cooling sensation as it evaporates
- REUSABLE & MACHINE WASHABLE Air dry until material is stiff, re-wet until soft. Machine washable with mild detergent and air dry
- HEAT STRESS PREVENTION Reduces the effects of heat exhaustion and fights fatigue while working or playing in the heat. Can also be used to help bring down fevers, hot flashes or night sweats
- SIZING 13in x 29.5in / 33cm x 75cm
Features:
2. Hubsan X4 (H107L) 4 Channel 2.4GHz RC Quadcopter, Black
- Durable one piece main frame.
- Precision 6 axis gyro.
- Ready to Fly.
- 4 channel 2.4Ghz control.
- High capacity LiPO battery.
Features:
3. Generic 7" LED Backlight TFT LCD Monitor for Car Rearview Cameras, Car DVD, Serveillance Camera, STB, Satellite Receiver and other Video Equipmen
7" LED Backlight Color TFT LCD monitor. Works perfectly with car rearview cameras, supports Car DVD,serveillance camera, STB, satellite receiver and other video equipment.Screen rotatable. Screen ratio 16:9/4:3 adjustable. Brightness, contrast, color adjustable.With 2 AV input. AV1 connects to car D...
4. 5.8G 32CH FPV Wireless Av Receiver W/ Led Channel Display Rc832 for RX
Two digits display: one for CH and the other for FR, real-time positioning which frequency band and which channel received;600mW transmitter power3.5KM distance in open area32 channels: Cover A, B, E bands and F band (Airwave band), 4 bands and all frequencies compatible
Oh man, thanks! I HAVE some of those cables! I bought them on Amazon and they just came in!
I'm using it to connect my d4r-ii to the FC. Splendid! My last question for you, I can take that red wire, soldier it to pos and black to neg on the PCB. But there is a 3rd, white wire. Can it just get scrapped? The black part is what I was calling a dupont connector. Was going to just plug that into the pins right beside where the ESCs plug in.
If that's all it takes, I'm set!
Please, do yourself a favor and DO NOT start with a 450. You will break something or someone. Drop $40 on the Hubsan X4 http://www.amazon.com/Hubsan-H107L-Mini-RTF-Quadcopter/dp/B00IZC6C8E/ref=sr_1_1?ie=UTF8&qid=1416879681&sr=8-1&keywords=hubsan+x4 as a trainer, it'll teach you everything you need to know about how to fly. Beyond that, the F450 is great.
>Oh man, thanks! I HAVE some of those cables! I bought them on Amazon and they just came in!
Yup, those will work just fine, depin the white one and just use the black and red making sure they are lined up right.
>I'm using it to connect my d4r-ii to the FC.
Excellent, I'm running that same set up and so far I'm really liking it. I think your naze32 was the rev5, I got the rev6, they just cleaned up some of the pins, but they are all still there. The cool part is you can do telemetry with that combo. I'm having the quadcopter battery voltage sent to my radio and set up some alarms on it to warn me when my battery is getting low. It let's me worry about flying and not having to worry about how much battery life I have left.
>My last question for you, I can take that red wire, soldier it to pos and black to neg on the PCB.
As long as you are hooking them up to the 5v output you are good to go.
>But there is a 3rd, white wire. Can it just get scrapped?
Take it out and scrap it.
>If that's all it takes, I'm set!
That all this takes. There are a bunch of other things to sort out, but just take one at a time and you'll get through this. :)
You can get one of these cheap monitors if you dont have one laying around
https://www.amazon.com/eBoTrade-Tech-Backlight-Serveillance-Satellite-Equipment/dp/B007G3J4EC/ref=sr_1_18?s=electronics&ie=UTF8&qid=1467312496&sr=1-18&keywords=headrest+monitor
or a set of quanam goggles from hobbyking.
and a receiver, this is just an example
https://www.amazon.com/Wireless-Receiver-Channel-Display-Rc832/dp/B012AD864G/ref=sr_1_5?ie=UTF8&qid=1467312559&sr=8-5&keywords=fpv+receiver
and set up a pretty cheap fpv. If your flying los you should really disable the on board vtx so you don't have to keep buying antennas when you crash since your not using them. It has to have an antenna on it or it will fry the vtx.
I have the turnigy, it's cold here and also I'm just building my first racing quad and want to train. Is it this cable? http://www.amazon.com/Hooshion%C2%AE-Simulator-Helicopter-Airplane-Controller/dp/B00DFDTU9G/ref=sr_1_fkmr2_1?s=toys-and-games&ie=UTF8&qid=1453490396&sr=1-1-fkmr2&keywords=USB+Flight+Simulator+FMS+Cable+Set
Ugh.. I guess the leads shorted the pins together when you were poking them in there? Sorry, I have a full set of test leads, forget basic multimeters just have long pokey conductive sticks..
Edit: If your meter has replaceable leads, something like this is highly recommended. http://www.amazon.com/gp/aw/d/B0012VWUI6/
Put the miniclips on pins before turning on power, and no worries about accidentally shorting things.