Best products from r/newmatter
We found 8 comments on r/newmatter discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 8 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
2. USAFilament 9800424 PLA 3D Printing Filament, 2.2 lb, 1.75 mm, Red Spool
High end filament backed by American 3D printing expertsSealed to avoid dehydration of material and thus a longer shelf lifeMade with high grade inputs for superior qualityCompatible with a variety of printersRecommended Extrusion Temperature 180°C - 210°C (356°F - 410°F)
▼ Read Reddit mentions3. Glue Dots Removable Adhesive Dot Roll, Contains 200 (.5 Inch) Diameter Dots
- Includes: 200 0.5'' diameter Removable Dots
- Glue Dot: A safe and easy adhesive solution, our sticky dots are double-sided instant-bonding adhesives perfect for home, office and school projects
- Safe For Surfaces: Our Glue Dots for crafts and projects are safe to use on photos and designed to securely adhere to paper, foam, plastic, metal, glass, and more
- Removable Adhesive: Our clear Glue Dots require no solvent, water, or heat to activate and can easily be removed or repositioned without leaving behind stains or sticky residue
- No Mess & Non-Toxic: Our non-toxic Removable Dots are acid, fume, and lignin free; A great kids’ glue, our mess-free dots require no drying time and come contained in a convenient roll
- Removable glue dots are double-sided adhesive dots that are repositionable on a variety of clean dry surfaces including paper plastic metal wood glass and more
- Glue dots are mess free remove cleanly and will not damage most surfaces
- Ideal for crafts school projects scrapbooking decorating and more
- Bond instantly remove easily and will not leave residue
Features:
▼ Read Reddit mentions4. NEC SF240E SEFUSE Cutoffs NEC Thermal Fuse 240C 240 Degree 10A 250V (pack of 5)
- Temporary, peelable
- Thixotropic, synthetic latex designed to withstand fluxing, wave soldering and cleaning
- Non-corrosive to copper, gold, silver or pre-soldered surfaces
- Opaque pink in color when applied, translucent red when cured
- Cured mask can be for masking conformal coatings
Features:
▼ Read Reddit mentions5. Happisland 5pcs NTC 3950 100K Thermistor with 1 Meter Wiring and Female Pin Head for RepRap 3D Printer Heatbed or Hot End
- A black drawing tablet glove with two fingers, specially designed for those artists who use graphic tablet/ Light Box/ Tracing Light Pad for their creation work
- Made of high elastic lycra fibre, it features great air permeability and strong tensile resistance, effectively improving the work efficiency
- Reduce the friction between your hand and the tablet surface, providing you with a comfortable feeling when drawing on a Graphics Monitor/ Tablet/ Light Box/ Tracing Light Pad
- Free size glove which can be used on both right and left hand
- Parblo Artist Glove with two fingers. Model name: PR-01
Features:
▼ Read Reddit mentions6. Aunifun 5Pcs 30MM Length Extruder 1.75mm Tube and 5Pcs 0.4mm Brass Extruder Nozzle Print Heads and 5Pcs Aluminum Heater Block Specialized for MK8 Makerbot Reprap 3D Printers
✿✿✿ Made of solid aluminum material, durable in use.✿✿✿ Nozzle Throat: Outer Thread - M6; Inner Diameter - 2mm; Length - 30mm; Filament Diameter - 1.75mm; Material - Stainless Steel.✿✿✿ 0.4mm Extruder Brass Nozzle Print Head: Color - Golden; Material - copper (brass); Size - 5*13mm...
▼ Read Reddit mentions7. BALITENSEN 24v 40w Ceramic Cartridge Heater 620 for 3D Printer Reprap Prusa Mendel Pack of 5
▼ Read Reddit mentions8. Wangdd22 15pc/Set 1.75mm Teflon Throat Tube+0.4mm Extruder Nozzle Print Heads+Heater Blocks Hotend for MK8 Makerbot ANET A8 3D Printer
Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm Extruder Brass Nozzle Print Head.Nozzle Throat: Outer Thread - M6; Inner Diameter - 2mm; Length - 30mm; Filament Diameter - 1.75mm; Material - Stainl...
▼ Read Reddit mentionsTop comments mentioning products on r/newmatter:
Summary
2. USAFilament 9800424 PLA 3D Printing Filament, 2.2 lb, 1.75 mm, Red Spool
High end filament backed by American 3D printing expertsSealed to avoid dehydration of material and thus a longer shelf lifeMade with high grade inputs for superior qualityCompatible with a variety of printersRecommended Extrusion Temperature 180°C - 210°C (356°F - 410°F)
▼ Read Reddit mentions3. Glue Dots Removable Adhesive Dot Roll, Contains 200 (.5 Inch) Diameter Dots
- Includes: 200 0.5'' diameter Removable Dots
- Glue Dot: A safe and easy adhesive solution, our sticky dots are double-sided instant-bonding adhesives perfect for home, office and school projects
- Safe For Surfaces: Our Glue Dots for crafts and projects are safe to use on photos and designed to securely adhere to paper, foam, plastic, metal, glass, and more
- Removable Adhesive: Our clear Glue Dots require no solvent, water, or heat to activate and can easily be removed or repositioned without leaving behind stains or sticky residue
- No Mess & Non-Toxic: Our non-toxic Removable Dots are acid, fume, and lignin free; A great kids’ glue, our mess-free dots require no drying time and come contained in a convenient roll
- Removable glue dots are double-sided adhesive dots that are repositionable on a variety of clean dry surfaces including paper plastic metal wood glass and more
- Glue dots are mess free remove cleanly and will not damage most surfaces
- Ideal for crafts school projects scrapbooking decorating and more
- Bond instantly remove easily and will not leave residue
Features:
▼ Read Reddit mentions4. NEC SF240E SEFUSE Cutoffs NEC Thermal Fuse 240C 240 Degree 10A 250V (pack of 5)
- Temporary, peelable
- Thixotropic, synthetic latex designed to withstand fluxing, wave soldering and cleaning
- Non-corrosive to copper, gold, silver or pre-soldered surfaces
- Opaque pink in color when applied, translucent red when cured
- Cured mask can be for masking conformal coatings
Features:
▼ Read Reddit mentions5. Happisland 5pcs NTC 3950 100K Thermistor with 1 Meter Wiring and Female Pin Head for RepRap 3D Printer Heatbed or Hot End
- A black drawing tablet glove with two fingers, specially designed for those artists who use graphic tablet/ Light Box/ Tracing Light Pad for their creation work
- Made of high elastic lycra fibre, it features great air permeability and strong tensile resistance, effectively improving the work efficiency
- Reduce the friction between your hand and the tablet surface, providing you with a comfortable feeling when drawing on a Graphics Monitor/ Tablet/ Light Box/ Tracing Light Pad
- Free size glove which can be used on both right and left hand
- Parblo Artist Glove with two fingers. Model name: PR-01
Features:
▼ Read Reddit mentions6. Aunifun 5Pcs 30MM Length Extruder 1.75mm Tube and 5Pcs 0.4mm Brass Extruder Nozzle Print Heads and 5Pcs Aluminum Heater Block Specialized for MK8 Makerbot Reprap 3D Printers
✿✿✿ Made of solid aluminum material, durable in use.✿✿✿ Nozzle Throat: Outer Thread - M6; Inner Diameter - 2mm; Length - 30mm; Filament Diameter - 1.75mm; Material - Stainless Steel.✿✿✿ 0.4mm Extruder Brass Nozzle Print Head: Color - Golden; Material - copper (brass); Size - 5*13mm...
▼ Read Reddit mentions7. BALITENSEN 24v 40w Ceramic Cartridge Heater 620 for 3D Printer Reprap Prusa Mendel Pack of 5
▼ Read Reddit mentions8. Wangdd22 15pc/Set 1.75mm Teflon Throat Tube+0.4mm Extruder Nozzle Print Heads+Heater Blocks Hotend for MK8 Makerbot ANET A8 3D Printer
Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm Extruder Brass Nozzle Print Head.Nozzle Throat: Outer Thread - M6; Inner Diameter - 2mm; Length - 30mm; Filament Diameter - 1.75mm; Material - Stainl...
▼ Read Reddit mentions
I purchased some 3M Scotch-Blue 2090 tape and it works great. I have a hole in my plate from a fault I had in one of my prints and the tape seems to fix the hole.
I am currently using a raft as it seems the best and have had no adhesion issues since I applied the tape.
FWIW I ordered and have successfully printed with both Hatchbox and USAFilament (http://www.amazon.com/gp/product/B00LKL2Y5W?psc=1&redirect=true&ref_=oh_aui_detailpage_o03_s01)
I did see a bit of the "leaking" that the OP mentioned with the USA Filament, but otherwise it's been fine for the prints I've been making.
I used little glue dots.
Glue Dots Removable Adhesive Dot Roll, Contains 200 (.5 Inch) Diameter Dots (08248) https://www.amazon.com/dp/B00161UBTW/ref=cm_sw_r_cp_apa_i_1-skDbQ8C73MB
Here’s the links to the things I bought.
Heater cartridge
SEFUSE
HeatBlocks, Nozzles, Heatbreak
100K Thermistor