(Part 2) Best products from r/pinball

We found 14 comments on r/pinball discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 34 products and ranked them based on the amount of positive reactions they received. Here are the products ranked 21-40. You can also go back to the previous section.

Top comments mentioning products on r/pinball:

u/terribleatkaraoke · 1 pointr/pinball

Is this the thing you're talking about: DeoxIT® DN5 Mini-Spray, nonflammable 5% solution 14 g https://www.amazon.com/dp/B000RGD9PK/ref=cm_sw_r_cp_api_9LuhzbHEPA02V

And just to be clear, I switch off the machine, spray this thing on the volume control stick thing and slowly turn it around, let it dry then switch the machine back on? Sorry I'm not a very handy person.

u/CheesyGoodness · 2 pointsr/pinball

If you don't have it already, get Pinball HOF: The Williams Collection. 12 tables, from the 70's on up, same excellent physics, a tourney mode where you can challenge your friends, and a "Williams Challenge", where you have to beat a predetermined score to move on to the next table. Miss the score on a table 3 times? Yer done, start over, loser. It's fun as shit.

u/delti90 · 2 pointsr/pinball

Yep, I have them on TNA, TSPP, and Deadpool. I'll be doing AFM and Whirlwind at some point too.

They're just these things stapled to the bottom of the cabs then wired into 12v. I have the same type of strips going around my ceiling too.

u/DefaultGen · 2 pointsr/pinball

I use Harbor Freight's rolling bin rack. I put my tools on top and big parts and stuff on bottom. Small parts in these Akro-Mils bins. You outgrow individual tool boxes quickly.

u/Chuckwurt · 2 pointsr/pinball

Cable Matters Cat6 Snagless Ethernet Patch Cable in Black 150 Feet https://www.amazon.com/dp/B00B3UTRWI/ref=cm_sw_r_cp_api_pG.2xb0KVJKV3

Here you go. This probably costs less than one month of your internet service.

u/pindr_ · 1 pointr/pinball

BUTZ BLITZ One Grand wax is fantastic. Pinball Life usually has it in stock.

Novus 2 is a polishing compound. Unless you have really bad ball trails, it isn't necessary.

Replace the balls while you're at it, if you haven't already.

u/ts4z · 1 pointr/pinball

From the factory, the nuts on the leveler are 5/8. But if you buy the nuts at the hardware store, they're 9/16. You may also want a 3/8 wrench for moving the leveler itself if it's not too damaged (which it usually is). If it won't move, it's vise grip time, and I wouldn't recommend that on the floor of a pizza joint.

I use this wrench because it is both 5/8 and 9/16, guaranteeing I'll be able to move the locking nut. After you move the leveler, you tighten the nut against the bottom of the leg to make it stay there. It's a good wrench and it says Williams right on it. https://www.amazon.com/Williams-1727-Double-Wrench-8-Inch/dp/B002M1CMY2/ref=sr_1_1?ie=UTF8&qid=1497374969&sr=8-1&keywords=williams+5%2F8+9%2F16

u/mechajubei · 2 pointsr/pinball

This is what I use. Can hold a couple rolls, clips to a belt, and doubles as a weapon for kicks.

DeSantis City Slicer Coin Purse, Black https://www.amazon.com/dp/B00JJYPHXI/ref=cm_sw_r_em_apa_i_LvvhDbFA7WV1W

u/NZ_Guest · 4 pointsr/pinball

Most likely those are .156 pins.

You'll need the female terminals, I always go with the "Trifurcon" type:

u/mickio1 · 1 pointr/pinball

tough im talking about those or that one

same thing different shell. have one and its pretty bad and boring. they dont even make the ball bump around!

u/Pepsi4me97 · 1 pointr/pinball

Replace the pinball every 6 months or a year or so, over time the ball becomes dull and rough and they loose their smoothness. Rough balls eat up playfields and damage them. I’m willing to bet that game has probably never had the ball chnaged since it left the factory. Also if you see any type of rust forming on the ball, DO NOT AND I REPEAT DO NOT PLAY THE GAME WITH THAT BALL! Rusty balls are like sand paper and will destroy the art in no time. Countless playfields have been destroyed because people simply don’t replace the balls. It’s much cheaper replacing a ball then a replacement playfield.

https://www.amazon.com/Steel-1-1-16Th-Pinball-Balls/dp/B004QYMDS8