Best products from r/plastidip
We found 21 comments on r/plastidip discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 44 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. TCP Global Heavy Duty Rubber Eraser Wheel 4” Inch Pad & Adapter - Pinstripe, Adhesive Remover, Vinyl Decal, Graphics Removal Tool
- Obliterates Decals Fast and Efficiently: A durable, long-lasting Heavy Duty 4" Alternating Slotted Edge Rubber Eraser Wheel Pad Tool that quickly removes adhesives and decals. This eraser wheel tool is designed for fast high-speed removal of pinstripes, decals, vinyl, tapes, graphics, flooring, double-sided molding, emblems, and trim adhesive from cars, trucks, motorcycles, RV's, signs, glass, windows, and other industrial, and household materials.
- Safe: The eraser wheel scrubs off the stripes and decals with friction instead of abrasives, preventing scratching and other damage to the substrate surface below them. The eraser wheel's alternating slotted tooth edge design allows it to dissipate the heat better under high-speed friction, enabling the wheel to remove material from substrates easier, faster, and safer. It will not gouge or scratch cured acrylic enamel or urethane paint. Do not use the wheel on lacquer coatings.
- Compatible with Drills and Rotary Tools: The 1" wide eraser wheel is compatible with most electric drills and rotary tools as it has a 5/16" - 24 threaded arbor molded into the center of the rubber, plus it comes with a drill arbor attachment that mounts on the threads of the eraser wheel. The wheel can be used at a maximum of 4,000 rpm, but works best between 1,500 to 3,000 rpm.
- Safe and Easy to Use: Apply light pressure with the wheel starting at the top of the decal and moving side to side, or for faster results, use the entire width of the wheel without tilting or angling; Remove any residue with appropriate mild solvent; Always use proper protective equipment when using power tools. The wheel includes a Stop Use Line.
- TCP Global's premium product line selection includes sandpaper, backing plates, polishers, and polishing pads that provide exceptional performance, so you can get the job done fast, saving you time and money!
Features:
2. Wera Kraftform Plus 334/6 Screwdriver Set with Rack and Lasertip, 6-Pieces
- Features Lasertip Slotted and Phillips drive tips and rack
- Lasertip micro-rough drive tip bites into the fastener to ensure a perfect fit and reduce cam-out effect
- Multi-component Kraftform handle fits the shape to the hand for the ultimate in comfort and high speed torque transfer
- Handle markings include screw symbol and size of tip to easily find the right tool
- Features Lasertip Slotted and Phillips drive tips and rack
- Lasertip micro-rough drive tip bites into the fastener to ensure a perfect fit and reduce cam-out effect
- Multi-component Kraftform handle fits the shape to the hand for the ultimate in comfort and high speed torque transfer
- Handle markings include screw symbol and size of tip to easily find the right tool
Features:
3. Cartman Cr-Mo 5 Sockets 1/2" Drive Impact Socket Set with Protective Sleeves
Impact Socket Set-Chrome Protective Plastic Sleeves, 15/17/19/21/22mmMust-have 5-piece set for anyone working with expensive, premium car and truck wheelsProtects wheel - narrow socket casing has tough nylon sleeve - won't scratch chromeNylon insert helps prevent damage to lug nut chrome or paint fi...
4. TEKTON Phillips/Slotted High-Torque Screwdriver Set (8-Piece) | 26755
- In stubby- and full-length sizes, unique three-sided handles give you the leverage to generate more torque
- Premium alloy steel blades have precisely sized tips for an exact fit in fasteners
- Size marking on butt ends is easy to identify in tool belt or drawer
- Handle profile resists rolling on inclines up to 20 degrees
- Made in USA
Features:
5. Pittsburgh Automotive 3 Ton Heavy Duty Ultra Low Profile Steel Floor Jack with Rapid Pump Quick Lift
Super-tough precision welded construction with an industrial grade finishIndustrial quality for professional mechanics and hardcore automotive enthusiastsRapid Pump exclusive dual parallel pump system lifts with far fewer pumpsUniversal joint release provides precise load control in any handle posit...
6. TEKTON Pliers Set, 6-Piece (Slip Joint, Groove Joint, Cutting, Lineman's, Long Nose) | PLR99001
Includes: 2-pc. slip joint pliers: 6-1/2, 8 in.; 1-pc. high-leverage diagonal cutting pliers: 7 in.; 1-pc. linemans pliers: 8 in.; 1-pc. long nose pliers: 8 in.; 1-pc. groove joint pliers: 10 in.Slip Joint Pliers have universal, 3-zone jaws that grip multiple shapes and cleanly shear wireGroove Join...
7. TEKTON 13101 3/8-Inch Drive Socket Set, Inch/Metric with TEKTON 13001 1/4-Inch Drive Socket Set, Inch/Metric
- Tough, compact storage cases save space in toolbox drawer
Features:
8. TEKTON 24335 1/2-Inch Drive Click Torque Wrench (10-150 ft.-lb./13.6-203.5 Nm) with TEKTON 15356 1/2-Inch Drive by 24-Inch Breaker Bar
- Wrench: Emits a click that can be heard and felt when the preset value is reached
- Wrench: High-contrast dual-range scale is easy to read, even in low light
- Wrench: Reversible ratchet head drives in both directions and measures torque in clockwise direction
- Breaker Bar: Breaks loose rusted or stuck nuts and bolts
- Breaker Bar: 180-Degree, chrome moly flex head lets you work at any angle
- Breaker Bar: Spring-loaded ball bearing retains sockets
Features:
9. Hopkins (11838MI) FloTool Oil Drain Container - 15 Quart Capacity
Fit Type: Universal
10. TEKTON 15356 1/2-Inch Drive by 24-Inch Breaker Bar
- Breaks loose rusted or stuck nuts and bolts
- 180-Degree, chrome moly flex head lets you work at any angle
- Spring-loaded ball bearing retains sockets
- Forged and hardened chrome vanadium steel construction
- Meets or exceeds ANSI torque standards
Features:
11. BIG RED T43002A Torin Steel Jack Stands: Double Locking, 3 Ton (6,000 lb) Capacity, Red, 1 Pair
- Double locking jack stands help support vehicles after lifting with a jack; Handles a wide range of vehicles including small cars,ATV's, UTV's, and more
- Features a lifting range of 11-1/4" to 16-3/4" with a 3 ton (6,000 lb) load capacity; Saddle has a large surface area that provides better contact with the load being supported.Saddle Diameter:3.35 inch
- Constructed with heavy-duty steel and is industrial welded for quality and long term durability; Removable locking support pin provides added security that increases safety by 200%
- Wide pyramid style foot base provides added strength; Large foot base delivers additional stability and measures 7.5" x 6.7"
- Multi-position forged iron ratchet bar has a sawtooth design, allowing for quick height adjustments that lock into place. Includes a limited 1-year manufacturer warranty.
Features:
12. Mechanix Wear - Original Work Gloves (X-Large, Black)
Thermal plastic rubber (tpr) hook and loop cuffs for easy on and offSmooth surface thumb and index finger point of contact for exceptional dexterityFingertip pattern reduces seams and enhances finger tip sensitivity
13. Forever Black Bumper & Trim Conditioner 32oz.
Protects Against UV RaysVersatilePermanent ResultsForever Black is intended for porous, textured black plastic, vinyl, and rubber surfaces. It will streak on nonporous materials.
14. Rust-Oleum 248656 Professional Grade Rubberized Undercoating Spray, 15 oz, Black
Perfect for use on bare or primed metal underbodies of cars, trucks, trailers, RVs and moreProfessional-grade formula provides superior protection against corrosion and damage from water, salt and other chemicalsDries to the touch in 1 hour and covers up to 10-15 sq. ft. per canUndercoating helps de...
15. CleanTools The Absorber Synthetic Drying Chamois, 27" x 17", Natural, Single
- ABSORBENT. Spend less time drying and more time enjoying life
- SOFT & SAFE. Easy on your hands and easy on your car
- MACHINE WASHABLE. Wash and reuse the Absorber for years to come
- CONVENIENT. Comes with the perfect storage tube for at home or on-the-go
- Dries anything faster and easier
- Hundreds of drying uses
- Great as a towel
- Lint free and chemical resistant
- Machine washable
Features:
16. Trimbrite T9005 Black-Out Tape
- Conceals unwanted chrome accent trim for tasteful restyling
- Conceals chips, scuffs and scratches on black moldings for enhanced like-new appearance
- Lifetime warranty for optimal reliability
- Self-adhesive and easy to apply for quick installation
- Width: 1.375 in.
- Length: 20.00 ft.
Features:
17. BRIGHTLINES Crossbars Roof Racks Luggage Racks Replacement for 2011-2020 Jeep Grand Cherokee
- High grade aluminum constructed. Light weight and durable.
- Load capacity150lbs when load is evenly distributed.
- Crossbars only fit vehicles with GROOVED SIDE RAILS. Refer to picture. Do NOT fit Altitude and SRT models
- Comes with one year manufacturer warranty.
- The package comes with a pair of crossbars, four mounting brackets and instruction
Features:
18. Wagner 0515034 ProCoat Stand Airless Paint Sprayer
Space-saving telescoping handle3/4 hp motorAuto lube attendant2,800 PSI electric piston-pump paint sprayer with 1/2-horsepower motorSprays a gallon of paint in 5 minutes, including thick latex, oil-based paints, stains, and sealersIncludes a 25-foot high-pressure airless spray hose and a andle for e...
19. Stillest Peel-N-Stick Metal Wall Tile, 3-Inch by 6-Inch, Stainless, Pack of 32
Create a professional, high end look for less; Brushed aluminum tiles with stainless-colored polyester coatingDurable scratch-, splash- and heat-resistant polyurethane finishEasy to cut tiles don't require spacers or grout; Tiles bend to create perfect corners with less cutting and no wasted off cut...
20. Genuine Honda Accessories 08703-YR578MAH-PN Urban Titanium Metallic Touch-Up Paint
- Used for: 2011-2013 CR-V, 2013 Honda Civic 4-door
- High quality PPG paint
- Makes fixing small scratches on your vehicle quick and easy
- High quality, tough acrylic paint resists UV rays to help ensure long life and attractive appearance
Features:
From what I've heard, you don't actually need to take your wheels off to dip. If you don't know what tools you'll need to do it, then you probably should go this route.
However if you still want to get some good tools to learn how to work on your car, here's what you'll need:
Floor jack this is the Harbor Freight one. It can be found in stores for as low as $70 depending on coupons. It's actually a pretty decent jack. Its very low and it lifts well. It's pretty good quality too, just very heavy. If you're not in the states/near a HF, do some research on a decent one as you don't want to drop your car on anyone/anything.
Jack stands you'll need four if you want to take all your wheels off at once. I don't have these stands and I don't know anything about them so do your research on some good ones (they don't have to be very expensive) and make sure to get some that will support your vehicles weight. Remember, be safe.
Breaker bar this will help you get the leverage you need to break your lug nuts loose. It's a very smart idea to properly torque your lug nuts back down when you put your wheels back on so they don't fall off or you don't snap a stud. Here's a combo kit with a torque wrench and that same breaker bar I have a few Tekton brand tools and I'm very pleased with them. They are a fantastic budget option that isn't junk. I would definitely buy from them again (and I'm a bit of a tool snob)
Lug nut sockets this is a generic kit that I have no experience with. You'll need a socket to fit on your breaker bar and torque wrench. This is a set with multiple sizes, you only need one size for your car so if you want to save some money, figure out what size your lug nuts are and just get one socket. The ones in this kit and some you'll find elsewhere are coated in a plastic sleeve to prevent scratching on your wheels.
Gloves Gloves aren't necessary but some people like them to keep from getting their hands super dirty. You can get as cheap or as expensive as you like with gloves. These seem to be popular. If you do go to HF to buy a floor jack, I like their heavy duty black nitrile gloves. They're disposable and very strong.
This should be all you need to get started with changing tires and whatnot. I'm on mobile so sorry for the inevitable typo. Good luck with your wheels and don't forget to post pictures on the finished product. I'll link some more tools below this if you'd like to build of a kit to do basic maintenance like changing your oil, etc...
Socket set This is a very good place to start with sockets. I linked a 1/4 drive and 3/8 combo set. The smaller 1/4 inch drive sockets are great for small places and will be fine for a lot of your car. The 3/8 inch drive set is good for larger fasteners or things that are a bit tighter. If you were only going to get one, I'd get the 3/8 drive. Alternatively if you want something a little bit better, GearWrench makes very good sockets and ratchets for a good price as well (more than Tekton but way less than "professional" tool truck brands)
Oil drain pan Doing an oil change is a great way to do maintenance on your car and get started before you do bigger things. You'll need to drain the old oil somewhere so a pan like this is perfect. You don't need anything too fancy. I think I got mine from my local auto parts store for ~$10.
Screwdrivers There's a million different options for these. My personal favorites are the Wera Kraftform screwdrivers they are super comfortable and they have a special non slip tip that is amazing. I don't want to use any other screwdriver ever after this. (They're on sale now too!! They're usually about ~$10 more than this. I almost want to get an other set just because)
Pliers These are great pliers at a good price. Keep them clean and they should last a long time. I'm very happy with mine.
I can't think of much more right now. You'll know when you need something else. This also depends on what kind of car you have. Jeeps for example, use a lot of torx fasteners so you'd need torx sockets for a lot of stuff. Just make sure you watch a lot of videos on how to do things and make sure you're comfortable doing whatever it is you're doing. The last thing you want to do is damage you or your car.
Is the the hard plastic trim on the outside that you are trying to cover? Like the bumpers and fender covers and stuff?
If so I would honestly recommend dying it black rather than plasti dipping it.
I did the same dye to my wife's old Volvo Cross Country and her new JK Jeep fenders and bumpers and it restored the faded blue plastic back to an even deep black.
I've tried a few different dyes and the best ones I've used so far is this stuff called Forever Black.
Forever Black Bumper & Trim Conditioner 32oz.
Absolutely amazing stuff. 1 quart should be enough to do the entire vehicle. Just apply with a sponge and use a cloth to wipe up the excess.
Try this for removing the decals. It will usually take up everything including the gunk and sticky left if you do it by hand, and this won't mark up the underlying paint like some other methods. https://www.amazon.com/dp/B07L1BVQB7/ref=cm_sw_em_r_mt_dp_U_qQaRCb9QJYPKN
​
The two biggest things I'd say to be aware of-- make sure your surface is super clean and free of any contaminants. Everyone says it, and you can't say it enough.
​
Second-- if you are taping off, remove the tape promptly-- while its still wet. If you hit a dry spot, stop pulling and grab an exacto or razor and try to cut along the tape pull rather than pulling up the dip.
it would peel off quickly. if you wanted that feel on something not expensive, try an automotive undercoating instead. it will not be removable however.
I found that this rustoleum has a pretty smooth texture. sand the mouse with 400ish before hand. and remember, it will not come off anywhere as nicely as dipping it
It's a drying chamois with a different coating to make it slide over dip easier while holding a bit more fluid. These are pretty good on dip and paint, and it's what the Dip Washer cloth is based on. You can pick up the chamois online or at Walmart and stuff.
I've heard good things about this
I'd measure your trim and make sure it's wide enough before ordering though. Make sure you get some as wide as the trim you're blacking out.
I have the BRIGHTLINES roof rack on Amazon and love it. Just took a 1,700 mile round trip road trip with a cargo basket attached to it with zero issues. Only $100 too.
https://www.amazon.com/2011-2017-Grand-Cherokee-Crossbars-Luggage/dp/B008RDL78G/ref=sr_1_1?ie=UTF8&qid=1491493488&sr=8-1&keywords=brightlines+roof+rack
Still debating on doing full truck yet. Black would look nice but I don't Know if I would gloss it or if I would do the bed cover ect...
I used Flexdip for the plastic trim and also Protectdip for the rims. Will update on how the quality is.
If I do decide to dip the entire thing will this sprayer be good? I assume it will be and I am only choosing this sprayer because it is available for me to use without having to buy one myself. http://www.amazon.com/Wagner-0515034-ProCoat-Airless-Sprayer/dp/B004SUEYPK
you might be better off using something like this.
Alright fellas I appreciate the help. I started to look into DupliColor and unfortunately they dont have my color so I found this https://www.amazon.com/Honda-Accessories-08703-YR578MAH-PN-Titanium-Metallic/dp/B007SIGH68
Has anybody had any experience using this type of product?