Best products from r/polymer80
We found 23 comments on r/polymer80 discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 19 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Case Club Hard Waterproof Rifle Case with Closed Cell Military Grade Polyethylene Foam 50.3 x 13.5 x 5.0 Inches (Gen 2)
- Inside case dimensions are 50.3"L x 13.5"W x 5.0"D and outside dimensions are 52.75"L x 16.0"W x 6.0"D
- DO NOT SETTLE for cheap and flimsy diced foam! Diced foam tears easily, retains water (rust!), collects dirt, and even if left untouched will eventually DISINTIGRATE right into your gun! Case Club foam is closed-cell military-grade polyethylene, which does NOT absorb liquids, does NOT tear easily, lasts a lifetime, can be cleaned easily, and will NOT disintegrate.
- Case is airline approved for checked luggage and has wheels for easy transport, padlockable, shippable, dustproof, and airtight
- Reinforced pad lock holes for added security, and a built in pressure equalization purge valve for changing altitudes
- Case comes with a cutting blade to make customizing the foam a breeze
Features:
2. UM Tactical, UM3 Universal Sight Mount
The UM3 works with all sights and scopesThe UM3 works with any firearm using an 1913 Picatinny rail and clips on easilyNo tools needed for installMade in the USA
3. Ameriglo GL-329 Tall Suppress 3Dot Tritium For Glock
Tall Suppressor Set, All Models Except 42, 43Rear Tritium Color: Green With White Outline140 Inch Wide Front, 150 Inch NotchCountry Of Origin: China
4. TRUGLO Tritium Pro Glock MOS Low Set Night Sight, Black
- Front sight Focus-Lock for fast and accurate shooting
- Glows-in-the dark - no batteries or light exposure required
- Assembled in the USA with quality
- Swiss Tritium for maximum brightness
- Unmatched visibility in low-light shooting conditions or complete darkness
Features:
5. Dremel 107 Engraving Cutter, 1/8" Shank
The product is 2Pk 3/32" Engrave cutterEasy to useThe product is manufactured in United StatesSecure objects to a stable surface while workingFor best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening downUse higher speeds for hard woods, slo...
6. Flitz Multi-Purpose Polish and Cleaner Paste for Metal, Plastic, Fiberglass, Aluminum, Jewelry, Sterling Silver: Great for Headlight Restoration + Rust Remover, Made in the USA
- MULTI-PURPOSE CLEANER: Has the industrial strength cleaning power to protect and polish metal, plastic, fiberglass, aluminum and chrome; Even removes rust, graffiti and can restore headlights, yet gentle enough to use every day for kitchen and bathroom.
- EASILY REMOVES: Tarnish, Rust, Water Stains, Chalking, Lime Deposits, Heat Discoloration, Lead & Powder Residue, Oxidation, Bugs, Tar, Oil, Fingerprints, Tree Sap, Bird Droppings, Graffiti, Dyes, Black Streaks/Scuff Marks.
- USE ON: Brass, Copper, Silver-plate, Sterling Silver, Chrome, Stainless Steel, Nickel, Bronze, Solid Gold, Aluminum, Anodized Aluminum, Beryllium, Magnesium, Platinum, Pewter, Factory Hot Gun Bluing, Painted Surfaces, Formica, Cultured Marble and more.
- MAXIMUM SAFETY: Non-toxic, non-abrasive, non-flammable. Flits is even safe to use on food preparation surfaces; Safe enough to use in the kitchen or the bathroom, strong enough to use in the garage.
- MADE IN THE USA: This polish is developed in Germany with advanced German ingredients and proudly made at our headquarters in Wisconsin; Flitz is a third generation family owned company.
Features:
7. Dremel 106 Engraving Cutter, 1/8-Inch Shank
Secure objects to a stable surface while workingFor best results insert bit in tool and back out slightly before tightening down to provide plenty of shank for the collect or chuck to hold the bitUse higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid m...
8. HTS 401B3 90 Pc Multi-Grit Diamond Burr Set (600 Fine, 150 Medium, 40 Coarse)
- 40, 150, & 600 grit sets
- Heads coated with industrial diamonds on all sides
- 1 3/4" length with 1/8" shank
- 90 different head shapes & sizes
- Includes 3 plastic storage cases
Features:
9. AUSTOR 24 Pieces Wool Felt Mounted Mandrel Set 2 Shaped and 6 Sizes Polishing Buffing Wheel Bits with Free Box for Dremel Rotary Tool - 1/8 Inch Shank
- Package include - 24 pieces wool felt mounted mandrel for Dremel rotary tool, 2 shaped and 6 sizes, felt-tipped
- 2 Shaped - with 12 cylinder shaped grinding heads and 12 bullet shaped, different sizes of heads
- Common size - head diameter: 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, each size 4 pieces; univeral shank diameter: 3mm
- Extra bonus - come with a free plastic box, convenient for store and fetch
- Wide applications - make polished goods clean and bright, ideal for various mould, glass, medical equipment, metal, etc
Features:
10. Dremel 3000-1/25 120-volt Variable Speed Rotary Tool Kit with 1 Attachment, 25 Accessories and Flex Shaft Attachment
EZ Twist nose cap with wrench for fast accessory changesVariable speed for greater versatility- from 5,000 to 32,000 RPMCan be used with all Dremel rotary tool accessories and most attachmentsThe product is Moto Tool Flex ShaftComfort grip hand piece allows finger tip control to cut, grind, sand, sh...
11. CDS Tactical Products Polymer 80 PF940SC Premium Rubber Textured Grip Wrap
- Easy to install and will stay put but is removable with no residue left behind
- Installs in minutes with included instructions
- Designed, manufactured & packaged with pride in Keene, NH with American made materials
Features:
12. AmeriGlo Sight, fits All Glocks Except 42/43, Green Tritium Orange Outline Front Black Rear, Tall Suppressor Set
- Fits all glocks except 42 43
- Tall optic height
- Green tritium orange Outline front
- Package Dimensions: 4.84" L x 3.54" W x 0.98" H
Features:
13. Number and Letter Stamp Set (36 Piece Punch Set/A-Z & 0-9) Industrial Grade Hardened Carbon Steel Metal - 1/8" (3mm) Characters - Perfect for Imprinting Metal, Wood, Plastic, Leather, More!
36 PIECE SET - 26 Uppercase Letters (A through Z) and 10 Numbers ( 0-9)DESIGNED TO LAST OVER 10,000 STRIKES - Hardened Carbon Steel Strength, Incredibly Durable and Long Lasting!CONVENIENT HARD PLASTIC STORAGE CASE - Keeps All the Punches Safe & OrganizedEASILY STAMPS HARD & SOFT SURFACES - Includin...
14. Bitterroot Fret Wire End Cutter Nipper Medium Size
- Luthier tools XXXS
- Fret wire end cutter nipper, DO NOT USE FOR STAINLESS STEEL
- flush cut design for clean close cuts
- designed for cutting nickel silver fret wire
- Tool Steel, NOT FOR USE WITH STAINLESS STEEL OR HARD METAL
Features:
15. OD Green & Black USA IWB Hybrid Concealed Carry Holster (Right-Hand, Fits Glock 17,19,22,23,25,26,27,28,31,32,34,35,41)
- One Year Replacement Warranty
Features:
16. Outlaw Holsters Black Carbon Fiber Kydex Concealment IWB Holster (Right-Hand, Fits Glock 19/23 - Polymer 80 PF940C & PF940V2)
IWB - Inside the Waistband Style Kydex Holster (RIGHT and LEFT options available).RELIABLE - 100% Hand Mand in the USA! Material is custom molded Kydex that is proven to be durable in a variety of environments. Belt Clip is 1.5 inch injection molded plastic belt clip that works with most belts. Our ...
17. Atoplee 10pcs 1/8" Shank Tungsten Steel Solid Carbide Rotary Files Diamond Burrs Set Fits Rotary Tool for Woodworking Drilling Carving Engraving
- 【SIZE】 Shaft diameter: 1/8 inch(3mm); Drill Bit Size: 6mm.
- 【SPEED】 The speed is generally 6000-30000 rpm.Too high speed may bend the shaft .
- 【DESIGN】Material:Tungsten Carbide.The double-line design of the cutter head makes the cutter head more sharp and wear-resistant, with high hardness.
- 【USED】Tungsten steel grinding head is widely used in industrial sectors such as machinery, aviation, automobile, shipbuilding, chemical engineering and process engraving.
- 【INCLUDED】10pcs Tungsten steel Burrs in a storage box.
Features:
18. Xtreme Precision 1/2-28 Stainless Fluted .710 OD x 5/8 Long, Thread Protector
- CNC Machined Stainless Steel.
- Made in the USA by Xtreme Precision LLC
- Buy 10 and get 20% Off..We Usually Ship Same Day, No more than 2 or 3 Days
Features:
19. Glock 17 19 22 23 26 27 31 32 33 45 (Gen 1-5) IWB Holster - Combat Veteran Owned Company - Inside The Waistband Concealed Carry - Adjustable Retention and Cant (Right-Hand Draw (IWB))
⭐️ RIGHT-HANDED ✔ FITS MOST GLOCK PLATFORMS! LIGHTWEIGHT (2 oz.) Safely fits a Glock 17 19 19x 22 23 26 27 31 32 33 45. It WILL NOT fit these Glocks with any aftermarket attachments (i.e. laser, flashlight, etc) however aftermarket sights are ok.✔ ADJUSTABLE RETENTION: Audible clicking sound...
Case Club Tactical Rifle Case with Closed Cell Military Grade Polyethylene Foam- 51 inch
https://www.amazon.com/gp/product/B07PJTXCKR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Hand cut all the foam with the included razor. Not perfect, but I'm super happy with it. Traced everything with a white wax pencil, cut out all the way through, took the cut out piece, dissected it and put half back in the hole to bring the pistols/mags up to the right height above the foam.
As I tell everyone, if you buy from Amazon, sign up for smile.amazon.com and choose the second amendment foundation as your charity of choice. Buy stuff and smirk everytime Jeff Bezos has to donate a portion of the sale to them. :)
What Ronin said...
These are pretty great for the price: Ameriglo Tall Suppress 3Dot Tritium For Glock
These are also a good deal: TRUGLO Tritium Pro Glow-in-The-Dark Handgun Night Sights for Glock Pistols
​
Both will work with your g19 slide, and are solid choices, even more so for their price point ($70). Free shipping if you have Amazon Prime.
I'd just stipple it. I can tell you what to buy and how to do it including the borders. You'll need the following:
https://www.amazon.com/Dremel-107-Engraving-Cutter-Shank/dp/B00008Z9ZV/ or https://www.amazon.com/Dremel-106-Engraving-Cutter-8-Inch/dp/B00008Z9ZU
https://www.amazon.com/Dremel-120-volt-Variable-Attachment-Accessories/dp/B075174NCV/ (you may have your own dremel, but definitely get a flex shaft for it)
https://www.amazon.com/HTS-401B3-Multi-Grit-Diamond-Medium/dp/B00U0E0KRE
https://www.amazon.com/AUSTOR-Grinding-Polishing-Accessories-Attachment/dp/B078Y5XGM8 (careful with these, light touch and keep it moving)
https://www.amazon.com/Flitz-Multi-Purpose-Fiberglass-Aluminum-Sterling/dp/B000MUSOW4
First use your engraving cutter to cut the borders that you've drawn on with a water-removable Stabilo marking pencil. Try to cut as smoothly as possible, with a steady hand. Don't try to cut it all at once, be patient (be patient for all of this, it took me a whole week doing a little at a time to complete the whole process, and turning my dremel off periodically because I have an older model flex shaft that gets hot after some use - solved this by wrapping the grip with bicycle inner tube)
The smoother you cut it the easier the rest will be. Some people just use the engraving cutter for borders, but I followed someone's guide and then used the diamond burs to smooth it out and polish it. Go from the lowest grit to the highest. You can either use the ball bits that are the same size as your cutter, or use the rounded cylinder bits. You can angle the cylinder bits in certain ways to get around curved surfaces, you'll kind of have to experiment with that. Once you get to the highest grit, I found that the only way to get it near-glass smooth was to apply a lot of pressure. It doesn't remove much material and you kind of want it to heat up the plastic to get it smooth. Then, still not satisfied with this, I got those felt wheels and cut the very tip off the smallest one, and used a bit of flitz paste, and then went over all the borders. That got it close enough for me. You can get more advice from the Weapons Stippling group on Facebook.
After you do the borders, I use the round tip on the walnut hollow wood burner on a medium heat setting. You don't want it too hot, not with the P80 plastic anyway. My technique was to press in, not too much but just enough, and drag downwards. A random totally pattern is best, I did a somewhat orderly snake pattern and then went over it again and smeared it out to give it a more organic texture. Then I went over it one more time, lightly and fastly rubbing all along the surface to blend the ridges that were created into the rest of the texture. You can do this several times to get it just right. The result is a texture that is grippy, yet not rough. That's how I like it, but you can experiment. The key is not to heat it up too much and don't stick any of the tips in too deep, and don't try to do it perfectly ordered unless you've gotten good at that with practice and are using an appropriate tip. You can make your own tips out of #8-32 brass screws or buy blanks from OT Defense, or some other place.
For those of you not happy with the texture of the stock PF940 series, or you have a Readymod and don't feel up to stippling it, these things are great. They were rather easy to apply and completely covered the rough stock finish with a grippy textured rubberized grip.
I have no affiliation with them, but I just had gotten one and liked it so much I ordered a second.
I bought a metal stamping set, like this. But I didn't have anything to fully support the guide rod channel while I was doing it, so it looks like straight up shit. If I were to do it again I'd either take it to an engraver or buy an engraver tool.
https://www.amazon.com/UM-Tactical-UM3-Universal-Sight/dp/B00L5QZ4YU
​
Or google "frame mount optic" or "glock scope mount". There are definitely cheaper options than the UM3 -- I think I picked up one for $25 at a gun show, and put a cheap optic on it -- which held up fairly well, since it wasn't riding on the slide.
​
Be aware that you can also get mounting plates that fit into a standard glock rear dovetail, although you lose the rear sight, I use this mounting plate on my target G17 P80 with a vortex viper. The plate has been rock solid (in fact, it's probably never coming out, as the fit is extremely tight).
Cobalt P80 PV940v2 with Concealed Carrier holster.
https://www.amazon.com/dp/B07PPD2Y4N/ref=cm_sw_r_cp_awdb_t1_PX3hDbZC17SRS
Fits all P80s just fine.
https://www.amazon.com/dp/B06XBJKPBH/ref=cm_sw_r_other_apa_i_aa9UCbZG7JP6A
here is leather with kydex
https://www.amazon.com/gp/product/B07N8HQSYW/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1
Bought it from Amazon. The wife pick it out for me because I was undecided between 2.
Xtreme Precision 1/2-28 Stainless Fluted .710 OD x 5/8 long, Thread Protector
https://www.amazon.com/dp/B00Y1GJEP6/ref=cm_sw_r_cp_apa_i_LT6rDb09TNH4M