Best products from r/razerphone

Get a case apparently the glass back is pretty sensitive. The official cases won't protect against high falls and I actually damaged my Razer Phone 1 with an official case.
I use this one, and have dropped my phone in it and it held well. Gets a bit dirty cause of the groves but easy to clean.

Spigen Liquid Air Armor Designed for Razer Phone 2 Case (2018) - Matte Black https://www.amazon.com/dp/B07JN6V3K5/ref=cm_sw_r_cp_apa_i_w6jTCbBFAA2CS

Only issue with this case and some others is that some Razer phone 2 screen protectors are too big and don't fit well with cases. I just buy Razer phone 1 screen protectors now and they fit but with bigger margins (but still bigger than the actual screen)

I also got a dbrand skin and only put the camera portion on because apparently that portion scratches easily too.

I definitely always carry a power bank, and the phone charges fast.

Chroma is awesome, but is sometimes a little glitchy and will turn on when not supposed to and drain battery. Started happening last update so I'm sure it'll be fixed.

Installing an SD card may be hit or miss, I don't have recommendations, but the faster the better. The one I installed caused hiccups when running apps so make sure you get a good one.

Dolby Atmos Bass Boost settings cause crackling in audio. Play around with the settings. Some updates they fix the crackling, and then some updates they bring it back haha.

Camera is apparently good with GCam, but I haven't tried it myself.

Use Cortex to change your performance for games, and don't forget to change back to power saver mode in Cortex when you're done.

Have fun with your phone!!

https://www.amazon.com/dp/B07DJ85NF3/ref=cm_sw_r_cp_apa_i_IG4zCbGAH8VK5

This is the best one. The companion app that it uses allows remapping the controls to touchscreen inputs. A bit pricey but hands down the best controller.

Has some cons, using cases with it is a snug fit. I use the spigen case and it just barely fits. Set up is also a bit tedious but after you have it set up, you do not have to do it again.

Pros are good though, Can even turn off your phone and it will still keep the settings. Unlike that octopus app. Also you have to set the game up in the app for the first time. After initial setup you can just launch the game directly from the game app and not the controller app. Also works with Google play supported games. Although fortnite might not be supported but i haven't tried it so i cannot confirm.

Want to take it a step further? Use this usbc to hdmi cable to mirror your phone to a tv, monitor or projector. It also has a usb c power input that supports fast charging.

https://www.amazon.com/dp/B0746NR9YH/ref=cm_sw_r_cp_apa_i_MM4zCbG5HB768

And in case you are wondering i use a RP1

I don't know if they make a rp2 case but if they do. I am currently using Razer Phone Case,Feitenn Razer PU... https://www.amazon.com/dp/B078GRP8CY?ref=ppx_pop_mob_ap_share it has a pretty awesome magnet in the front and back but it lacks a latch. It can only fit 3 credit cards in it at a time. Or 2 cards and some folded cash. It's the first wallet case I have had that doesn't obstruct the camera either. Hope my information is at least somewhat usable.

I wasn't a fan of the ones on the Razer website either, but I checked Amazon and found one that I love.

https://www.amazon.com/TUDIA-Razer-Extreme-Protection-Rugged/dp/B07K73P7NX

I personally would never go caseless, especially on a phone that's glass on both sides, but I'm not you. 🤷‍♂️ Best of luck

I got this case, it's fantastic. It fits the phone like a glove, is slim "not bulky or cheesy looking" looks great, and feels nice in the hand.
Spigen Liquid Air Armor Designed for Razer Phone 2 Case (2018) - Matte Black https://www.amazon.com/dp/B07JN6V3K5/ref=cm_sw_r_cp_apa_i_wWQUDb035AF81

I use this one and haven't had any issues at all, works great with multiple options for how you'd like to use it and has a perfectly placed port for charging while mounted.

​

https://www.amazon.com/gp/product/B07G61YN8K/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

I bought these and with a few line up attempts got it on perfect. Barely any glass around the edges and with the Tudia slate metallic case it's perfect. Can't see how the glass could get scratched whatsoever.
https://www.amazon.com/dp/B07KBBFRZ3/ref=cm_sw_r_cp_apa_i_WV3OCbXQDDYCR

Big thing is make sure it says RP2 the first 3 pack I bought was for the RP1 and were actually a little bit smaller exposing more glass on the edges. Hope this helps!

The only 2 cases that are good enough for protection are probably Spigen Liquid Air and the one from Tudia.

https://www.amazon.com/TUDIA-Razer-Extreme-Protection-Rugged/dp/B07K73P7NX

https://www.amazon.com/Spigen-Liquid-Razer-Phone-Matte/dp/B07JN6V3K5

From reviews I've seen, both provide solid protection. Tudia is slightly better but bulkier. So I guess I'll recommend the Spigen. Using it myself too, I'd say it's a nice balance between protection and sleekness!

I use this one but 12000mAH instead.
https://www.amazon.com/iWALK-Scorpion-8000mAh-Recharging-Cables/dp/B06Y34F62W

Love it because it supports quick charge, and since my wife uses an iphone, with this I no longer need to carry different cables when we go out.

Spigen has an amazing case and screen protector for the Razer phone. I have them and I absolutely love it.
Case: https://www.amazon.com/Spigen-Rugged-Flexible-Durable-Absorption/dp/B078KJQH5V/ref=pd_sbs_107_1?_encoding=UTF8&pd_rd_i=B078KJQH5V&pd_rd_r=H0APDY3MSAMY2K02N3RE&pd_rd_w=3Wqfe&pd_rd_wg=j6vXo&psc=1&refRID=H0APDY3MSAMY2K02N3RE
Screen Protector: https://www.amazon.com/Spigen-Screen-Protector-Tempered-Friendly/dp/B078SZWSKL/ref=sr_1_109?ie=UTF8&qid=1521388559&sr=8-109&keywords=razer+phone

Wireless Charger, CHOETECH Qi... https://www.amazon.com/dp/B00C40OG22?ref=ppx_pop_mob_ap_share

This is what I use and it is pretty cheap $13.99

It works perfectly fine for me and I have a plastic and rubber case on my razer phone 2

I have a wireless charger like that Anker one I can't use it to charge my RP2 at all due to coil placement in the RP2.

The flat Samsung Qi Chargers [https://www.amazon.com/Samsung-Certified-Charge-Wireless-Charger/dp/B012AWBN9C/ref=sr_1_4?crid=JH9AVNWXW7T8] however work perfectly fine through the Tudia Merge case as long I place the RP2 correctly.

Check out amazon, they have some good thin ones, I bought this one and honestly wouldnt want another case for another phone again
https://www.amazon.ca/Razer-TUDIA-Extreme-Protection-Rugged/dp/B07K73P7NX/ref=sr_1_1_sspa?keywords=razor+phone+2+case&qid=1574142700&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFSQ09FNjFSQTROMUwmZW5jcnlwdGVkSWQ9QTA1Njk0ODUxQTNLT09QRFlBWFYyJmVuY3J5cHRlZEFkSWQ9QTA5MDk1MThXNVQ0NTBIT1dFVkcmd2lkZ2V0TmFtZT1zcF9hdGYmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl

agreed i love the spigen liquid armor case

Check these out:

https://www.amazon.com/dp/B0755N6CSR/ref=cm_sw_r_cp_apa_i_bIXXCb52SSD7Q

Read some reviews about them over on /r/headphones

They may not be your cup of tea but I think they sound amazing and they are light and portable.

I've got a Tudia Merge, but it does NOT work with wireless charging. Here's what I own:

Merge: https://www.amazon.com/gp/product/B07K73P7NX/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

Anker Wireless Charger: https://www.amazon.com/gp/product/B07DBXZZN3/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

Choetech Wireless Car Charger: https://www.amazon.com/gp/product/B07HQDHV49/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

The Anker works fine when I remove the case. So does the Choetech, but it has to grip the phone at a weird height to start charging. That makes both of them pretty much useless to me.

I like the Tudia case. I'll take protection over wireless charging any day. But those chargers above don't work with it, at all.

https://www.amazon.com/gp/aw/d/B07LFBCVTY/ref=ox_sc_saved_image_1?smid=A32MXCUMEJ42JI&psc=1 Just in case anyone else was interested. This is the only one I found that specifically lists the rp2 in the description, and it works. I can use my headphones and it charges rapidly at the same time. And the sound quality is perfect.

I got this one and it works great with both RP1 and RP2
https://www.amazon.com/gp/aw/d/B07LFBCVTY?psc=1&ref=ppx_pop_mob_b_asin_title

I trust this company for cases. They are always solid https://www.amazon.com/dp/B07K73P7NX/ref=cm_sw_r_cp_apa_i_jYKEDbEW75WP3

The Anker Powerwave Stand does work, assuming you don't have a case on your phone. Unfortunately, I have the Tudia case on my RP2 which added just enough additional bulk to raise the phone out of range for the coil to work consistently when the phone was upright. At best, I'd have to keep the phone in landscape and center the stand behind the bottom half of the phone (which usually meant propping up the top half of the phone with someone so it sat leveled on the stand).

I decided to scrap the stand and get a few Anker Powerwave Pads at home and keep an Anker Powerwave 7.5 Pad at work (to charge rapidly). While the placement still requires centering the pad on the bottom half of the phone, the pads all work great... and I can still use my Tudia case!

I don’t have it yet but this one seems good

AirsFish USB C to 3.5mm Audio Adapter USB C PD Charge Splitter 2 in 1 Type C to 3.5mm Aux Stereo Earphone Headset Headphone Fast Charging Compatible with Pixel 2/2XL 3/3XL Razer Phone 2 iPad Pro 2018 https://www.amazon.com/dp/B07LFBCVTY/ref=cm_sw_r_cp_api_i_xHoHDbZT0P738

I picked up Jaybird X3 on clearance at Target. They put out pretty good isolated sound in my opinion, but I'm no audiophile. They hold a connection much better than the Beats I had previously. I have used them for over an hour at a time while mowing the yard and they still had at least 20% left.

https://www.amazon.com/Jaybird-Wireless-Bluetooth-Sports-Headphones/dp/B01M7NCT5O?th=1

Yeah, usb-c audio really needs to be standardized. ¯\_(ツ)_/¯

This is the one I bought when I had the RP1. Works with my RP2 too. Did you buy a really cheap one that looks like a normal splitter?

Yes. I use a USB c hub off Amazon. It adds a regular usb port, HDMI port, and another usb c port for pass through charging.

Here is the link:

MOSTOP USB C to HDMI Video... https://www.amazon.com/dp/B0743DZN2D?ref=ppx_pop_mob_ap_share

I have this one and the Choetech t513, the t513 is easier to get to charge, but is also $20. Both charge fine, just the smaller charger seems to be pickier on alignment.


https://www.amazon.com/dp/B07D2CWBS1/

https://www.amazon.com/TUDIA-Razer-Extreme-Protection-Rugged/dp/B07K73P7NX


Not thin, but still looks cool imo.

I can confirm this one works.

AirsFish USB C to 3.5mm Audio... https://www.amazon.com/dp/B07LFBCVTY?ref=ppx_pop_mob_ap_share

Seems to have good audio also.

Personally I like the Tudia Merge cases because it's a mix of soft and hard shell cases, almost like an OtterBox and it's got a special cut out for the back logo

TUDIA Razer Phone 2 Case, [Merge Series] Dual Layer Heavy Duty Extreme Drop Protection/Rugged Phone Case for Razer Phone 2 [2018] (Matte Black) https://www.amazon.com/dp/B07K73P7NX/ref=cm_sw_r_cp_apa_i_DTzNDbBYTG49P

This please. I'm only finding the OG RP case.

EDIT: Found it! https://www.amazon.com/dp/B07K73ZJWM/ref=cm_sw_r_cp_apa_i_fDM4BbCRCHX1D

I'd recommend the [Spigen Liquid Air Armor Designed for Razer Phone 2 Case] (https://www.amazon.com/dp/B07JN6V3K5/ref=cm_sw_r_cp_apa_i_ycIGDb8TABKWY)

It looks basically like this one https://www.amazon.com/dp/B07FC8J3F4?ref=yo_pop_ma_swf

The cases with the most protection that I've seen are the Spigen Case and the TUDIA Case. Both aren't as heavy duty as an Otterbox case though. I think the phone is too niche for Otterbox to make a case for it.

I have this one:

https://www.amazon.com/gp/product/B07FC8J3F4/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

https://www.amazon.com/TUDIA-Extreme-Protection-Rugged-Metallic/dp/B07K73ZJWM/ref=mp_s_a_1_1_sspa?keywords=tudia+razer+phone+2&qid=1574761854&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzVEdHTzlEUFFHM0FSJmVuY3J5cHRlZElkPUEwMzk1MjU3WjJaSjNBSkhMNzk2JmVuY3J5cHRlZEFkSWQ9QTA5MDM0MjYyTUM1NlM0V1o1VVpWJndpZGdldE5hbWU9c3BfcGhvbmVfc2VhcmNoX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=

Razer Phone 2 Case, TUDIA [Merge... https://www.amazon.ca/dp/B07K73P7NX?ref=ppx_pop_mob_ap_share


..That's the one I bought

>to try this inexpensive adapter

Right there in the OP.

https://www.amazon.com/Spigen-Liquid-Razer-Phone-Matte/dp/B07JN6V3K5/ref=sr_1_1?keywords=spigen+razer+phone+2&qid=1566167578&s=gateway&sr=8-1

I have spent a LOT of money on just about every available Razer Phone 2 case. This is the one you want if you're like me and hate the Tudia triangle.

https://www.amazon.com/Spigen-Liquid-Armor-Designed-Razer/dp/B07JN6V3K5/ref=sr_1_3?ie=UTF8&qid=1551196891&sr=8-3&keywords=razer+phone+2+case

I have the Razer Phone 2 Case, TUDIA [Merge Series] Dual Layer Heavy Duty Extreme Drop Protection/Rugged Phone Case for Razer Phone 2 [2018] (Matte Black) https://www.amazon.com/dp/B07K73P7NX/ref=cm_sw_r_cp_apa_i_Z6mDCb7Y6CSMQ