Best products from r/savisworkshop
We found 7 comments on r/savisworkshop discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 7 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Panasonic K-KJ17MCA4BA Advanced Individual Cell Battery Charger Pack with 4 AA eneloop 2100 Cycle Rechargeable Batteries
- Recharge up to 2100 times
- Maintain up to 70% of their charge after 10 years (when not it use)
- 2000mAh Type, 1900mAh min, Ni-MH pre-charged rechargeable battery
- 4 position charger with advanced, individual battery charging, AA and AAA cells
- Battery detection technology - automatically shuts off when charging is complete
Features:
2. Energizer AA Lithium Batteries, World's Longest Lasting Double A Battery, Ultimate Lithium (12 Battery Count)
12 Pack of Energizer Ultimate Lithium [AA] BatteriesEnergizer Ultimate Lithium is the No.1 Longest Lasting AA BatteryLeak proof construction protects the devices you love (based on standard use)Powers your most critical devices ideal for your smart home devices, outdoor surveillance systems, digital...
3. YYST Clear Light saber Wall Mount Wall Rack Wall Holder - Hardware Included.
- Patented Product for keeping lightsaber vertically displayed.Quantity : One clear blade holder , one wall mount clip. Hardware included.
- Clear - Both the blade holder and the wall mount clip are clear. Does its job without being visually obtrusive. Before installing , Please peel off the white film of the acrylic , which protects the acrylic from scratches. Then you will see very clear acrylic.
- Easy to take in and take out - Put your light saber into the blade holder and push the tip into the wall mount clip.
- Light Saber not included. 5 Pounds - the blade holder is very thick, which withstands up to 5 Pounds.
- Screw Covers included - the screw covers are provided to hide your screws.
Features:
4. OnFireGuy Clear Display Stand Easel for Air-Tite Holder Coin Capsules Challenge Medals Casino Chips, 10 Pack
- This Easel Measures: 1½" H x 1¼" W x 1½" D
- These Stands are Hard, Crystal Clear and Smooth to the Touch
- Injection Molded Display Stands are PVC Free and Archival Safe
- Made in the USA from Acrylic Plastic with a non-yellowing agent
- Stands Feature an Open Resting Area (Open Back) and Shelf Depth of 1/4"
Features:
5. OBO HANDS EM4305 Copy Rewritable Writable Duplicate RFID Tag - Can Copy EM4100 125khz Card Proximity Token Keyfobs10
1.Material: ABS waterproof material. Each keyfob has metal keyring.2.Can write by 125KHz RFID writer/copier3.Waterproof.Reading distance is 3-10cm.4. Widely used at apartment, office, park and other places.5.Color:blue.
6. English 10 Frequency RFID NFC Card Copier Reader Writer for IC ID Cards and All 125kHz Cards +13.56mhz UID Key +1USB
- Working frequencies. ID cards: 125 kHz, 250 kHz, 500 kHz, 375 kHz, 625 kHz, 750 kHz, 875 kHz, 1000 kHz. IC cards: 13.56 MHz, 125 kHz prox card.
- Support read:EM4100/EM4200,Mifare classic,UID cards,Ultralight,Ntag203,1386/1326/1346;Support cards write: 1386/1326/1346,T5577,EM4305,Mifare UID cards.
- The software of our machine is only compatible with Windows system, not working with MAC system or Linux system.
- Note: The applicability of our reader is limited, it cannot match all types of FRID cards. Please read our product description carefully. If your card is not the type listed by us, or if you don’t know the type of your card, please do not buy it!!!
- It can crack 13.56mHz encryption cards.(This device only supports partial sector encryption IC card, does not support all sectors encryption IC card).If your card is all sectors encryption,the device will show ‘’Decoding fails, please try to decode an upgraded version!’’Come with decoding software (working on Windows).To crack a encryption card ,you need to connect the reade to a PC.
- Not compatible for iClass ,awid , Indala and Keri cards.
Features:
You get a lot more energy in AA batteries. AAA is much inferior, and most of the time a device uses AAA batteries, it should have instead used AA batteries. I recommend you get these ones (make sure your battery specifications match the packaging in this photo):
Get this package first to get the highest quality charger on the market:
You need that charger to get the full life out of Eneloops. If you take care of them, Eneloops will last at least a decade, maybe longer.
Another good option are AA Energizer Ultimate Lithium batteries, which are not rechargeable, but they're lightweight, and they last longer than any other battery on the market, by far:
If you want rechargeable lithium, Tenavolts might work for you:
This is the mount I used. Just three small screws/anchors to attach.
YYST Clear Light Saber Wall Mount Wall Rack Wall Holder - Hardware Included. https://www.amazon.com/dp/B07F58LXFP/ref=cm_sw_r_cp_api_i_.rl0DbXD5WFPH
Maybe something like this?
You’ll basically need these tags:
https://www.amazon.com/dp/B0793Q6KDZ?ref=ppx_pop_mob_ap_share
Acetone to dissolve the plastic and then whatever you want to case your crystal in.
Or an actually crystal from Disney to rewrite.
I have this reader/writer and it works fine so far although most would recommend a Proxmark3:
English 10 Frequency RFID NFC Card Copier Reader Writer for IC ID Cards and All 125kHz Cards +13.56mhz UID Key +1USB https://www.amazon.com/dp/B07DS2YRLH/ref=cm_sw_r_cp_api_i_URBwDb3W84AZ0
amazon , there’s a wooden insert for where the neck of a bottle would rest, I used rubbing alcohol to weaken the wood glue, and rocked the piece out.