Best products from r/shroomery

We found 12 comments on r/shroomery discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 12 products and ranked them based on the amount of positive reactions they received. Here are the top 20.

7. ABN Power Punch Heavy Duty Hole Punch Set – Metal Hole Punch, Heavy Duty Hole Puncher Hand Punch 3/32in to 9/32in

    Features:
  • PUNCH HOLES IN YOUR PROJECT: The ABN Hole Punch Tool is a heavy duty punch and dies kit that has a high-leverage design and comfortable grips that allow you to manually create clean holes through sheet metals up to US 16 gauge; For mild sheet steel, aluminum, brass, polyurethane, plastic, canvas, cardboard, paper, shoe; Additionally use as a leather punch, belt hole puncher, metal hole punch for jewelry, and watch hole puncher; Not recommended for stainless steel such as silverware and utensils
  • PERFECT SIZE: Creates holes that are from 3/32-inch to 9/32-inch in diameter and includes a stop gauge for consistent spacing; 7 sizes of punches and dies include 3/32-inch (2mm), 1/8-inch (3mm), 5/32-inch (4mm), 3/16-inch (4.5mm), 7/32-inch (5.5mm), 1/4-inch (6mm), 9/32-inch (7mm); 1.75-inch (4.4cm) throat depth to punch holes as close as 1.75 inches away from material edge
  • EASY TO USE: This sheet metal punch uses interchangeable heads to pierce holes in a material of your choosing; Select a proper size punch and die, remove nut near handle using die adjustment tool, move connection bar, place punch on the head of hand punch, rotate nut by again using the adjustment tool to adjust caliper, and set distance between the edge and the hole; Apply lubricant (not included) after use to reduce friction, ensure a clean cut, and prolong tool life
  • SIMPLE STORAGE: Heavy-duty 8.75” x 4.6” x 2” inch (22.2cm x 11.7cm x 5.1cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization
  • PACKAGE CONTENTS: Package includes (1) metal punch tool, (7) punches, (7) dies, (1) attached throat depth gauge, (1) die adjustment tool, and (1) storage case for your convenience
ABN Power Punch Heavy Duty Hole Punch Set – Metal Hole Punch, Heavy Duty Hole Puncher Hand Punch 3/32in to 9/32in
▼ Read Reddit mentions

Top comments mentioning products on r/shroomery:

u/Fresh_Drip_Coffee · 2 pointsr/shroomery

Ive seen some people use a humidifier in their setup before. That may help with the moisture issue.

I've used this type before from Amazon

https://www.amazon.com/PuraSense-Ultrasonic-Aromatherapy-Essential-Humidifier/dp/B07MTTHCVV/ref=mp_s_a_1_8?keywords=humidifiers&qid=1567028923&s=gateway&sprefix=Humod&sr=8-8

But instead of putting the humidifier in the bin I pipped in the humid air using a tube from the top of the humidifier and set it beside the bin.

If you do go down this route, you might want a Bluetooth or smart version that you can set on a timer.

u/helpfiles · 1 pointr/shroomery

Almost any bulb should work ok as long as it is near the 6500k range like you've read about already.

I've used various brands of both CFL and LED lights successfully.

I eventually started using strip lights with a 12vdc power source attached the bottom side of my fruiting chamber lid.

u/beerface · 1 pointr/shroomery

No Amazon or ebay? I have something like this. Works great, gets em cracker dry. I can't get that level of dryness from a fan alone.

u/navik659 · 1 pointr/shroomery

Consider this for FAE.

TerraBloom 4" Inline Duct Fan, Quiet Energy Saving EC Motor with 0-100% Adjustable Speed Controller. 160 CFM, 18W. Ventilation for Grow Tents, Odors Exhaust, Heating and Cooling Duct Booster. https://www.amazon.com/dp/B07JNGS2V7/ref=cm_sw_r_cp_apa_i_gWcSDb5DQ5T3H

This for underneath the chamber.

Camco Front-Load Washing Machine Drain Pan, Protects Your Floor from Washing Machine Leaks, OD 30.5" x 34.5" x 1.64" (20786) https://www.amazon.com/dp/B00EOX2IRW/ref=cm_sw_r_cp_apa_i_NXcSDbM2J1N3T

u/ShinmaNiska · 1 pointr/shroomery

CaviCide is pretty damn good.

But then again so is ISO.

u/shroomigator · 1 pointr/shroomery

Those are the jars you want. I would recommend getting a punch to make the injection holes in the lids https://www.amazon.com/ABN-Power-Punch-Heavy-Duty/dp/B07D7HJQ5Z/

u/mopsockets · 2 pointsr/shroomery

Buy an Audobon myco id book and look for deadly/noxious lookalikes in your area. Do a spore print if it's not too dry yet. Check the book for other info. Don't (don't) ask the internet if you should eat something. It's very dangerous!
https://www.amazon.com/dp/0394519922/ref=cm_sw_r_cp_apa_i_udIDDbVAT1XYR