(Part 2) Best products from r/snowboardingnoobs

We found 23 comments on r/snowboardingnoobs discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 43 products and ranked them based on the amount of positive reactions they received. Here are the products ranked 21-40. You can also go back to the previous section.

39. Kinco Lined Heavy Duty Premium Grain & Suede Pigskin Mitt with Knit Wrist Glove

    Features:
  • TRUSTED BY OUTDOOR PROFESSIONALS FOR HARSH WINTER ACTIVITIES: Ski patrollers, snow plow drivers, loggers, and backcountry expeditioners alike choose Kinco 901s for their heavy duty durability and affordability. Premium grain pigskin leather is more durable than regular cowhide and will outlast synthetic or nylon work gloves. Suede pigskin reinforcement patches reinforce the high-wear areas of the glove to better withstand punctures and abrasions while extending the longevity of the glove.
  • FEWER SEAMS FOR MORE COMFORT: By relocating and removing typical seam patterns, this glove provides the smooth, comfortable feel of a seamless interior. Our seam patterns reduce the risk of irritation, blisters, glove failure, and other common glove issues.
  • HEATKEEP INSULATION KEEPS HANDS WARM AND DRY: Heatkeep thermal insulation is comprised of finely spun polyester fibers, which create thousands of air pockets between the outer shell and inner lining to fully envelop the hand. These air pockets work to trap the body heat generated inside the glove and shield the hand from the cold. An inner lining that is laminated to the Heatkeep fibers wicks moisture away from the hand to keep it dry.
  • SUPERIOR WATERPROOFING: Pigskin grain leather naturally repells water while remaining soft and flexible after getting wet. To further waterproof, apply the included packet of Nikwax Waterproofing and you have an invincible pair of winter gloves. The Omni-Cuff knit wrist cuff design offers a snug fit that keeps snow and debris out.
  • SIZING AND FIT: Sizing is based on men's sizes from the size guide. This unisex glove will fit both Men and Women. Refer to sizing guide for best fit. If you are in between sizes, we recommend sizing down. Leather gloves start stiff, but soften after a few uses.
Kinco Lined Heavy Duty Premium Grain & Suede Pigskin Mitt with Knit Wrist Glove
▼ Read Reddit mentions

Top comments mentioning products on r/snowboardingnoobs:

u/saf621 · 1 pointr/snowboardingnoobs

I got these: https://www.amazon.com/gp/aw/d/B073J7525B

I bought last years version so they were 50% off.

I haven’t had a chance to try them out on the slope yet since I only got them a couple months ago, but they are pretty slim fitting.

u/Badd11 · 2 pointsr/snowboardingnoobs

Ugh I had a good post typed out for you but then my app bugged out.
Read these:
http://www.tognar.com/blog/base-repairs/
http://www.tognar.com/d-i-y-database/

Buy this:
3M Half Facepiece Reusable Respirator 6200/07025(AAD), Respiratory Protection, Medium(Pack of 1) https://www.amazon.com/dp/B007JZ1N00/ref=cm_sw_r_cp_api_kFlSAb34NRHHW
Tognar sells it for $49.95 or so, Home Depot will have similar pricing to Tognar if I remember correctly. You’ll need the filters too.

Enjoy the rabbit hole.

u/taysteekakes · 1 pointr/snowboardingnoobs

https://www.amazon.com/Triple-Eight-60435280028-P-T8-Bumsaver/dp/B0094PKCCI

I wear these every day and I'm an advanced rider. I really wish I had invested in these when I was learning!

u/pandabear151 · 2 pointsr/snowboardingnoobs

Yeah I didn't want to spend a whole lot so I just bought some generic padded shorts on Amazon for under $50. For the price they're not bad, just wish the padding on the tailbone area was a bit thicker. This is the one I got.

u/jrt364 · 1 pointr/snowboardingnoobs

How "cheap" are you talking?

There are $15 snow goggles on Amazon, but without knowing your budget, it's hard to give advice.

Let me know your budget and I can help you find something.

u/lonbordin · 3 pointsr/snowboardingnoobs

Kinco 901t and snowseal with polypropylene liner gloves. I've been in -35 with them. I was earning my turns that day because the resort was closed due to extreme cold. I've only done this once and I've been boarding since 1986. So odds are you won't need that level of protection.

Sidenote: If this is because your hands are often cold add another layer to your core and make sure you don't have circulation issues.


Links:

https://www.amazon.com/KINCO-INTERNATIONAL-901T-Thermal-Premium/dp/B00RW286U0?th=1&psc=1

https://www.amazon.com/Atsko-Sno-Seal-Original-Beeswax-Waterproofing-Net-overall/dp/B00CQJDQ90/ref=mp_s_a_1_1?ie=UTF8&qid=1548934472&sr=8-1&pi=AC_SX236_SY340_FMwebp_QL65&keywords=snowseal&dpPl=1&dpID=51NfvT0j7hL&ref=plSrch

u/infazz · 2 pointsr/snowboardingnoobs

Zionor X4 Ski Snowboard Snow Goggles Magnet Dual Layers Lens Spherical Design Anti-Fog UV Protection Anti-Slip Strap for Men Women (VLT 16.87% Black Frame Revo Red Lens) https://www.amazon.com/dp/B01A42F57Q/ref=cm_sw_r_cp_apa_i_GOzsDbC9PMVF4

Fit over my glasses (OTG), cost around $40 and have changeable magnetic lenses depending on the cloud coverage. They do fog sometimes when I stuff my buff under them.

u/Kontemporary · 1 pointr/snowboardingnoobs

Was recently looking for a bag myself and read through the questions on this one and multiple people said they fit two boards with bindings

https://www.amazon.com/dp/B074FBBLXC/ref=cm_sw_r_cp_api_i_kG0QDb9YJQ381

u/cntrabnd · 1 pointr/snowboardingnoobs

Burton board have 'the channel' you can use their EST bindings, or if you dont have EST bindings you can use the transition kit (which should come with the board) to fit regular bindings on there

https://www.amazon.com/Burton-M6-Transition-Kit/dp/B005LG5OUY

u/V_Encarnated · 2 pointsr/snowboardingnoobs

Gotcha. I really don’t mind spending the money on something that is worth it/I will use/will last. Just don’t want to spend more where it isn’t warranted.

I’ve had my eyes on these anons.

u/clay_h · 1 pointr/snowboardingnoobs

Triple 8 actually makes snow helmets if that's the style you want. I owned one and it was alright but I much prefer my Smith Maze.

u/MoonDoggy7 · 2 pointsr/snowboardingnoobs

Here you goooo had to link Amazon since Burton is closed for climate change strike. If these don’t come with a liner you could also buy a liner to add a bit more.

u/mochirondesu · 2 pointsr/snowboardingnoobs

Was this but I grabbed the last one at that price

u/Meatcup · 1 pointr/snowboardingnoobs

Kincos with Beeswax

Kinco 1927KW Lined Premium Grain Pigskin Palm with Knit Wrist Glove https://www.amazon.com/dp/B01AT3QP2Y/ref=cm_sw_r_cp_api_i_fUoRDbR545XB3

u/chillypt7 · 1 pointr/snowboardingnoobs

Some of Burton’s hoods have “helmet fit” as a size option.