(Part 2) Best products from r/sportster

LOL @ "PLANET BULLSHIT"...shit I was drinking coffee man.

Its the HD Dyna Mini Fairing, they only sold it for like 2 years, but now people make knockoff kits that are identical.

Mounting is easy, just one bracket, it takes 10 minutes.

http://www.amazon.com/Headlight-Fairing-Custom-Harley-Sportster/dp/B007FGR852/ref=sr_1_1?ie=UTF8&qid=1398443691&sr=8-1&keywords=sportster+mini+fairing

It‘s a 2000.

The fairing: https://www.amazon.ca/Krator-Quarter-Windshield-Davidson-1995-2005/dp/B06XZWJDXT/ref=mp_s_a_1_1_sspa?keywords=krator+quarter+fairing&qid=1557205615&s=gateway&sr=8-1-spons&psc=1

The headlight: https://www.amazon.ca/Motorcycle-Projector-Headlight-Headlamp-Driving/dp/B018LXCV4U/ref=mp_s_a_1_fkmrnull_4?crid=3H9HI92SWNCV6&keywords=sunpie+daymaker&qid=1557205679&s=gateway&sprefix=sunpie+da&sr=8-4-fkmrnull

To install the fairing, you will need a docking hardware kit. Since I didn’t find any aftermarket kit with good reviews, I chose the genuine Harley kit:
P/N 58164-96A

I had to trim quite a bit of the fins behind the headlight to make it fit. I don’t know if my bike originally had that much wiring in there though.

If you're looking for cheap I use a set of canvas ones I found on Amazon. They're not pretty but you can shove 2 18 packs in each one if you're brave enough.

https://i.imgur.com/J4eoUX4.jpg

https://www.amazon.com/Stansport-766-Saddle-Bag/dp/B004Z1239G/ref=mp_s_a_1_4?keywords=canvas+saddle+bag+motorcycle&qid=1557353861&s=gateway&sprefix=Canvas+saddle&sr=8-4

I removed the rear tail lights and installed this from Amazon. Clean, easy to install and cheap.

MOVOTOR Smoked Harley Davidson Taillights LED Brake Turn Signal Lights for Sportster FLST Electra Glides Road Glides 2002-2010 Dynas License Plate Light https://www.amazon.com/dp/B071F89VJY/ref=cm_sw_r_cp_api_i_KNg2Cb5JBTCBP

You can use these and mount under your tank https://www.amazon.com/Auto-Meter-3209-Tachometer-Mounting/dp/B00062YWNI/ref=sr_1_9?ie=UTF8&qid=1519655184&sr=8-9&keywords=autometer+tachometer

I used this although it mounted to the fork and it is works so good and is super tucked in https://www.amazon.com/WinllyAT-Relocation-Bracket-Sportster-1995-2016/dp/B074H7LLNX/ref=sr_1_8?s=automotive&ie=UTF8&qid=1519655244&sr=1-8&keywords=sportster+speedometer+relocation

A bit pricey, but I really like the look of the Memphis Shades Gauntlet Fairing

I'm a fan of the Dakota Digital speedo, but they are pricey as well:

http://www.amazon.com/Dakota-Digital-MCL-3200-Speedometer-Tachometer/dp/B002VVCJT6/ref=sr_1_1?s=automotive&ie=UTF8&qid=1395148785&sr=1-1&keywords=dakota+digital

Buy a set of reversible snap-ring pliers. Something like this- http://www.amazon.com/OTC-4512-Internal-External-Snap-Ring/dp/B000OQMIZU/ref=sr_1_10?ie=UTF8&qid=1411835018&sr=8-10&keywords=snap+ring+pliers

You'll need them for other things on the bike too.

As for the clutch snap-ring, take a wooden or leather mallet and tap the clutch hub around the rim LIGHTLY, at the 4 points of the compass (not the clutch release retainer). It'll move the clutch hub back that microscopic bit so it's not forced against the snap-ring when you try to remove it.

This is what I have. It's cheap and it kinda shows (you can hear a bit of rattling at low speeds). It will do basically what you expect, keep the wind off your chest and send it clear into your face. But I like that more than the alternative. https://www.amazon.com/dp/B06XWG8BF9/ref=cm_sw_r_cp_apa_i_lNpnDbHB87NYC

This is the stuff I use (black only):
https://www.amazon.com/gp/product/B000MY3ML8/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

Something like this might work for you:
https://www.amazon.com/Rust-Oleum-248908-Automotive-12-Ounce-Degree/dp/B003CT4AL6/ref=sr_1_1?ie=UTF8&qid=1492443039&sr=8-1&keywords=red+high+temp+paint

Duro HF904 Median Tire - Rear - 130/90-16 , Tire Size: 130/90-16, Tire Type: Dual Sport, Rim Size: 16, Position: Front, Tire Ply: 4, Load Rating: 67, Speed Rating: S, Tire Application: All-Terrain 25-90416-130-TT https://www.amazon.com/dp/B000VVW768/ref=cm_sw_r_cp_api_dS9EybZ2H8P11

So far so good. Smoothish ride with a nice auditory feedback.

National Cycle Gladiator They fit on the speedo bracket's bolts quite nicely I think, they do scratch mine on the left a little; but no one sees it unless they're really looking. I really recommend it if you don't want a large windshield but still want something functional. Hell if I lean forward, I feel like I'm on a sportbike a bit, even gain some MPG on longer rides.

Edit: I forgot to ask, the tips you have, are they just to lower the sound? or do they do anything for back pressure?

I have one of these and it works just fine.

I got some leather saddle bags on Amazon (https://www.amazon.com/gp/product/B001CDZNBK/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1&pldnSite=1) and just throw them over the rear of the seat when I need them. I also tie a piece of leather shoelace through the holes and around the sissy bar.

I picked up this one from Amazon for $100 w/prime shipping

Good point, no need to jack up to change oil, maybe just a minor convenience so I don't have to be hunched over.

I was originally thinking something along the lines of this so I can keep the bike upright while filling the trans but all those stand types say they are for sport bikes.

Motorcycle 5-3/4 5.75 LED Headlight for Harley Davidson 883,sportster,triple,low rider,wide glide Headlamp Projector Driving Light https://www.amazon.com/dp/B018LXCV4U/ref=cm_sw_r_cp_apa_i_86j7CbA5K4AXV

I purchased this one: 5-3/4 5.75 Daymaker LED Headlight for Harley Davidson 883,sportster,triple,low rider,... https://www.amazon.com/dp/B018LXCV4U/ref=cm_sw_r_sms_apip_lr61rViUiOus6