Best products from r/subaru
We found 103 comments on r/subaru discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 897 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. MegaBrand N1 4" Burnt Tip Muffler Exhaust 2.5" Inlet Universal
- MegaBrand MUFFLER/EXHAUST REMOVABLE SILENCER SOME CARS REQUIRE WELDING
- Made of high quality T-304 stainless steel ( light weight design )
- Includes removable silencer OUTLET TIP 4", INLET TIP 2.5"
- LENGTH: 18X6X6" ; WEIGHT: 4lb 6.5oz Muffler - Quality aftermarket performance part
- MegaBrand MUFFLER
Features:
2. Subaru SOA635071 OEM Coolant System Conditioner
- Subaru Genuine Coolant System Conditioner
- Specifically formulated for Subaru vehicles
- Helps prevent corrosion in your Subaru's cooling system
Features:
3. 3M Headlight Lens Restoration System, 39008
- KIT INCLUDES: 1 - Disc Pad Holder, 3.25 in (8,2 cm) 6 - 3M Gold Sanding Discs 500 Grit, 3 in (7,6 cm) each 4 - 3M White Finishing Discs 800 Grit, 3 in (7,6 cm) each 1 - 3M Trizact Refining Disc, 3 in (7,6 cm) 1 - 3M Rubbing Compound, 1 US fl oz (29 m
- LIKE NEW HEADLIGHTS: Easy heavy duty kit solution help your headlights look like new
- REMOVE HARSHEST YELLOWING: Kit is powered by drill-activated sanding to provide maximum clarity
- RESTORE CLEARNESS: Improve the appearance of your vehicle
- SEE BETTER AT NIGHT: Enhances visibility and safety for night driving
- Features 3M abrasive technology and a polishing compound to restore hazy and dull headlight lenses, as well as other plastic lens surfaces on your vehicle
- System is intended to restore two headlight lenses
- Utilizes the muscle power of a common household (1200-1600 rpm) drill to do all the necessary sanding and buffing
- This item is not for sale in Catalina Island
Features:
4. Bafx Products - Wireless Bluetooth OBD2 / OBDII Diagnostic Car Scanner & Reader Tool for Android Devices - Read/Clear Your Check Engine Light & Much More
- [Compatible] Our automotive OBDII diagnostic engine reader works with all consumer automotive vehicles, cars & trucks in the USA that are model year 1996 or newer! Compatibility varies depending on vehicle country of location. See product description to check your vehicles computer compatibility based on your country of location. (NOT IPHONE / iOS COMPATIBLE)
- [Simple To Use] Plug our OBD2 diagnostic scanner into your vehicles automotive OBD2 port; Pair diagnostic scan tool with your Android phone via Bluetooth; Download an app to use it with; Then connect & start scanning for live sensor data like a professional direct from your vehicles on board computer! (NOT IPHONE / iOS COMPATIBLE)
- [Fix & Service Your Car For Less] Using our diagnostic code reader you can read, reset & clear your check engine error light fault codes with your Android phone (does not read ABS or SRS). Check and fix your emissions system readiness, know if you will pass emissions & smog test before you go with our diagnostic tool! (NOT IPHONE / iOS COMPATIBLE)
- [Live Data] Monitor live real time live gauge data direct from your autos computer systen with our diagnostic trouble code reader such as O2 sensors, fuel pressure, Engine load & more; Freeze fram data; Map based sensor tracking plus so much more! Making it extremely easy to check up on the health of your vehicle just like the pros! Our automotive health tool will help you keep your gas or diesel vehicles running many miles longer!
- [Guaranteed] Unlike other OBD2 car diagnostic scanners we guarantee ours will work on ALL OBDII protocols including J1850 which many have problems with! Works on both gas & diesel vehicles. Reads at faster speeds than most other OBDII wireless Bluetooth OBD 11 readers.
- Our car trouble scanner works with all consumer cars, light trucks & other autos purchased in the USA model year 1996 & newer (gas OR diesel) including but not limited to Audi, Ford, GM, Chevy, Chrysler; Dodge, Jeep, Toyota, Honda, Hyundai, Infiniti, Lincoln, Mercury, Mercedes, Nissan, BMW, VW, Porsche & More!
- [Elm327 Compliant] If the app you wish to use states you will need an ELM327 compatible tool, our OBDII diagnostic programmer / reader tool will work with it! Our OBDII engine scan tool is fully compliant with the ELM327 programmer command set giving you access to numerous professional level programs to choose from!
- [3rd Party App Required] A paid or free app is required to use our OBDII engine scan tool, we do not develop or sell these apps but have many to recommend such as: Piston, Torque Pro, OBD Fusion, DashCommd, OBD Auto Doctor plus so many more! compatibility in other countries, please see product description.
- [2 Year Warranty] We proudly back our OBDII trouble code reader with a professional 2 year warranty against all manufacturing defects! Our friendly, USA based, professional support team provide top notch service and will help you make the most of your new OBD 2 scan tool!
Features:
5. GEARWRENCH 3/8" Drive 6 Pt. 5/8" x 6" Magnetic Swivel Spark Plug Socket - 80546
- Entry Angle guides fastener
- Serration depth as deep as the fastener
- Large hard stamped identifications
- Swivel Spark Plug
- Drive Tang Size : 3/8 inch
Features:
6. AUXMART Tube Clamps Mounting Brackets for LED light bar Work Lights Fog Lights Off Road Lights Fit 1" Bull Bar (1 Pair)
Please Make Sure these Clamps Fit Your Vehicle Before You Purchase Apply to most ATV, Car, Truck, Offroad, Farm/Industries Vehicles etWill Fit 25mm(1") Round Tube/Bull Bar/Roll Cage/Bumper Can Work with most LED/HID/Halogen Light Bar, Spot/Fog Light, Driving Light with 6mm/8mm Mounting Bolts etcHole...
7. Subaru Fixed Crossbar Set Impreza E361SFJ000
Fits 2012 2013 2014 2015 2016 modelFor Impreza roof rails (base model)May be used in conjunction with Genuine Subaru roof attachments and carriers
8. Fumoto F-108N Engine Oil Drain Valve
- Drain your engine oil with a touch of a finger
- Replaces drain plug for quick, easy, clean oil change
- No more contact with hot oil and no messy hands or clothes
- Eliminates stripped threads
- Ideal for drawing small sample of oil for oil analysis
Features:
9. Nilight 20Inch 420w Triple Row Flood Spot Combo 42000LM Bar With Heavy Duty Wiring Harness for Off Road Lights, 2 Years Warranty
- Super brightness: Combo beam with triple row and nest reflector cup design in the middle for extreme light efficiency
- Upgrading reflector cup: the broad reflective plate on both sides allows multi-angle refraction, ideal for ambient illumination
- Adjustable mounting bracket: the bracket can be adjusted and slid, offering convenience to adjust position flexibly when needed
- High performance: IP67 waterproof rate, efficient cooling, die-cast aluminum alloy housing, over 30, 000 hours lifespan
- Package includes: 1PC 20 Inch 420w LED light bar and Wiring Harness
Features:
10. Nu-Finish NF-76 Liquid Car Polish
- Nu Finish Liquid Car Polish keeps your car exterior looking new with only one application per year
- Delivers impressive shine and protection without rubbing or buffing
- As the only polish available with no wax, the Nu Finish formula is specifically made to protect your car’s paint and clear-coat finish
- Perfect for use on cars, fiberglass boats, RVs, and even chrome surfaces
- Apply polish with a damp cloth, let dry to a haze, and wipe off
Features:
11. Eyourlife USLEDCPS180WEC001 32 inch 180W 32’’ Off Road Led Flood/Spot Bumper Light Bar for SUV Truck ATV
- REALLY BRIGHT:180W high intense LEDS and 32-34 inch. It will light up the whole substation for long irradiation distance.
- TOP NOTCH QUALITY:Made of high quality aluminum with PMMA Tough glass material for the lens. Lead your way throughout the trip with high brightness.The flood and spot pattern make for very long and wide visibility.
- HIGH PERFORMANCE:IP68 waterproof certification.With full aluminum housing to withstand harsh environment, protect the LED light bar against rain, wind and sand during the cross-country trip.
- THERMAL DIFFUSIVITY:Die casted aluminum alloy shell with Pressure - casted formation, the design system of ultra thin diversion lamp, multilayer heat sink solves the problem of heat after longtime working.
- WIDE APPLICATION: The work light can be compatible with almost all Jeeps, 4x4, Cars, Trucks, Motorcycles, SUVs, ATVs, Boats, etc. Many indoor and outdoor uses: Garden Lighting, Backyard Lighting, Back-up Light, Off Road Lighting, Construction Lighting and so on.
Features:
12. Cutequeen 20PCS Green T5 3528 5-SMD 3smd LED Car Lights Bulb 17 18 27 37 58 70 73 74 79 85 86 2721 (pack of 20)
Base type:T5,LED Type:3528 5-SMD,30 Lumen.Color:Green (with 181 degree light output)Only for DC 12V vehiclesDirect replacement for all T5 Wedge Type 17 18 27 37 58 70 73 74 79 85 86 2721Notice:All LED bulbs have to be plugged in a certain way,it has Positive and negative, so if they don't work at fi...
13. ATEQ Quickset TPMS Reset Activation Tool Relearn Tire Pressure Monitoring System
- Reset the TPMS system on most import vehicles
- Stores two sets of wheels for easy wheel swapping, ideal when swapping winter and summer tires and rotating tires
- Transfer new TPMS sensor ID's to your vehicle's ECU
- Works with Acura, Honda, Hyundai, Infiniti, Lexus, Mitsubishi, Nissan, Pontiac, Scion, Subaru, Suzuki, and Toyota
Features:
14. Ultimate Compound
- REMOVE PAINT DEFECTS: The ultimate product for removing oxidation, scratches, water spots, and blemishes without scratching
- BEST CAR SCRATCH REMOVER: Cuts as fast as harsh abrasives restoring surface clarity without scratching or swirling
- SAVES TIME: The clear coat safe formula dramatically reduces the time and effort to restore abused or neglected paint finishes
- STUNNING FINISH: Exclusive micro-abrasive technology leaves a "like new" finish and adds gloss in one easy step
- SAFE FOR CLEAR COAT: Safe and effective on clear coat and single stage paints, and can be applied by hand or dual action polisher like Meguiar's MT300 Dual Action Polisher
- Note: Kindly follow the directions on the label of the bottle
Features:
15. MEGUIAR'S G55032SP Complete Car Care Kit
- COMPLETE CAR KIT: Includes 12 premium products to clean, shine and protect your paint, interior, wheels, bumpers and everything in between. Takes guesswork out of the equation.
- GOLD CLASS CAR WASH: designed to blast away dirt and grime while boosting your car’s shine
- GOLD CLASS CARNAUBA PLUS LIQUID WAX: keeps your car reflective and leaves long-lasting protection
- ENDURANCE TIRE GEL: provides high gloss protection that keeps tires black with a dark gloss shine
- ALSO INCLUDES: Clay Bars and Quik Detailer to remove bonded contaminants, ScratchX 2. 0 to remove swirls and scratches, Quik Interior Detailer to clean and protect interior surfaces, PlastX Clear Plastic Cleaner & Polish to remove defects on uncoated clear plastics, and accessories
Features:
16. KLTECH 4Pcs Auto Door Clip Panel Trim Removal Tool Kits for Car Dash Radio Audio Installer Pry Tool
- Unique design allows access under trim to remove piece correctly--at the fastener point
- Versatile tool set that pays for itself with just one use; saves time and frustration
- Professional-grade kit of 4 incredibly useful tools for removing auto body trim and molding
- Easily remove Trim, Molding, Door panels and Dashboards.
- Works on interior and exterior trim, wide edge remover, narrow edge remover, pull-type remover, handle remover and upholstery clip remover
Features:
17. FalconZero F170HD+ DashCam 1080P 170° Viewing Angle microSD Card Included FULL HD
- FULL HD 1920x1080 Recording at 30 fps, Begins Recording as Soon as Car Moves
- Motion Detection Recording When Parked, Super Wide 170 Degree Angle of Recording View
- Loop Interval Recording to micro SD Card, SD Card Included
- f/2.0 Six-Glass Lens with Night-Vision, WDR Enhanced Image Quality, HD Photo Capture Mode
- Unparalleled USA Lifetime Customer Support, And Backed By Our 5 Year Hassle-Free Warranty
Features:
18. Philips RacingVision H7 Headlight Bulbs (Twin) 12972RVS2 Xtreme Vision Upgrade
- Up to 150% more light on the road
- Maximum Performance
- Rally effect
- Road legal
- Provides optimal visibility for extra control in darker conditions
Features:
19. WizGear Universal Air Vent Magnetic Phone Car Mount Holder with Fast Swift-Snap Technology for Smartphones and Mini Tablets, Black 1 Pack
- POWERFUL MAGNETIC PHONE CAR MOUNT: The reinforced magnetic holder of this mount is what sets it apart from other mounts. This Universal magnetic holder produces an intensive force of attraction that will hold any smartphone. Including Android, Apple, Blackberry and Microsoft devices.
- SWIVELS YOUR DISPLAY: Rotate your smartphone and swivel your display as you please. The base of the mount remains fixed into the air vent of your car and does not move, no matter how much swiveling or rotation you do. This guarantees that your smartphone will always remain in your preferred position
- WIXGEAR COMPLEMENTARY DESIGN: The complementary design of the magnetic mount is one that fits into the back of any smartphone. The magnetic mount is has a smooth surface that is perfectly suitable for mounting and holding any smartphone in place.
- EASY TO USE: This is an Air vent universal smartphone magnetic car mount holder is 10 times easier to use than any other magnetic phone mount holder due to its simple and complementary design. It has a sturdy rubber base and a powerful magnetic head for holding smartphones. Car Mount iPhone 6, Car mount iphone 6 plus, Magnetic Phone Car mount holder,
Features:
20. Chemical Guys WAC_118_16 JetSeal Paint Sealant & Paint Protectant with UV Protection & Hydrophobic Properties (16 oz)
- Protection from the harshest environmental elements
- Bonds with the exterior of your auto giving it a mirror like wet finish
- Delivers a durable high gloss shield
- This product is a unique anti corrosion sealant developed to provide the finest finish
- A great alternative to hydrophobic ceramic coatings or inchesnano coatings inches which require your paint surface to be completely free of scratches, swirls and blemishes before application
Features:
It doesn't make you sound dumb, I'd rather see something unique and cool instead of the same mods that are done over and over again.
If you're looking into RallyX have you thought about swapping over to Forester suspension to raise it up a bit?
I'd go the Cobb AccessPort route instead of tactrix because of the simplicity and now that the V3 has come out, the V2 is around $100 cheaper I think. But if you're comfortable doing it that way do it.
I'm not sure if it's just the picture but the headlights look a bit foggy. I used this on my first car a few years ago and it worked great. Most of the other headlight restoration kits are bullshit. You could also bake them open and paint the plastic pieces black to spice things up.
If yellow foglights are your thing I used this on my Subaru and I love it. Just takes around 5 light coats on the outside of the fog lights and you're good to go. Much better than any of the tint overlays or light bulbs.
Here's some information on it. Daniel Stern is pretty well known as the lighting expert.
Another thing you could consider if you want to mix things up is plastidipping your car. DipYourCar has some wild colors, Sunset Orange and Tiffany Blue are my personal favorites. I'd stay away from the normal black though, it normally makes cars look pretty trashy.
Hopefully it doesn't sound like I'm telling you what to do with the car, just giving suggestions. Good luck!
honestly, i wouldn't get either of those. yeah they're both good, but you really don't need all of that.
what i use:
griot's garage clay
meguairs soap
mothers cleaner wax
nu finish
and of course a (or a couple) 5 gallon buckets with a grit guard , which is completely not necessary, but highly recommended by professional detailers. i don't use one, and my car comes out fine. and a good, soft wash mitt. either a good sponge or a wheel brush for your wheels would be needed as well.
my once a year routine is as follows:
wash, claybar, nu polish, cleaner wax
usually wash every 2 weeks or so, and rewax every 6 weeks or so. if i did a bunch of off roading and the paint is gritty i'll clay as needed, but usually it's once a year.
also head over to /r/autodetailing for a lot of tips. beware though that they use a lot of very high end products, and circle jerk over polishing and getting perfect reflections. if all you're looking to do is keeping your paint in good condition, then what i do is just fine. if you're interested in keeping your paint better than factory, follow them.
Get NGK spark plugs. They are what the engine is designed for, and they're pre-gapped.
The pros use a tool like this to reach into the wells without worrying about a chain of extensions coming apart. Whether its worth the cost is up to you.
I always use anti-seize. I don't think its as important as it used to be, but its cheap and it gives me peace of mind. Also be sure to put dielectric great on the wires.
If you do it, be prepared to take a lot of stuff out, especially the battery and air intake. Its not an easy job, but it can save you a good amount of money.
There's nothing bad about your halogens; they're actually quite good, technically. They just need fresh, high-performance bulbs. Your stock bulbs are long-life H7 bulbs. This is how much improvement you can expect from new halogen bulbs alone. Can we say yes to 60+ feet?
And that was a test of previous-generation, high-performance H7 bulbs. The Philips XtremeVision, the king of the aforementioned test, has been dethroned by the even more savage Philips RacingVision. You can safely expect 70+ feet of additional sight distance with the RacingVisions. And they're super white to boot.
----
And if you want to go retarded with the output, remember that your typical H7 puts out 1450 lumens. There are special bulbs coming out in the next few days which are basically H9 bulbs with a H7 base. H9 bulbs put out 2100+ lumens. The H7 base allow them to fit into your Subie. That's a 45% increase in lumen count. That's only if you want to go full-retarded with the amount of light coming from your Subaru. Me, personally, I'd stick with the easily found Philips RacingVision H7 from Amazon. The special H7/H9 hybrid bulbs are more expensive and not on Amazon.
If you also upgrade your high-beams (9005) to HIR1 bulbs (9011), you'll put putting out 2500 lumens per bulb, per side, instead of a mere 1870. The total lumen count of your Subaru will be 2500+2500+2100+2100 = over 9000 (9200). Again, only if you want to go full-retarded with light.
I just pulled the cluster apart and checked what bulbs I needed. These are the bulbs that I ordred. http://www.amazon.com/gp/product/B00K7WW2HU/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
I also picked up a 20 pack of the white ones to do the glovebox light, and I'm hoping that the AUTO switch for the windows and hazards lights use the same bulbs but I'm not 100% on them.
To swap the bulbs you need two tools. A Phillips screw driver, and a small small Flathead(eyeglass style) or a pick.
For the HVAC lights
Took me 15-20 minutes to do it from start to end. But I had taken out prior to check what style bulbs I needed.
Here you go. :)
The inlet is bigger than my car has, but the exhaust shop is taking care of it for me. It was buy one that fit perfect for $100 and getting it installed for $45 or or getting this one (that looks and is more what I'm looking for) for $40 and installing for $45 as well. Seemed like the better option. :)
Touchless car washes don't do shit to clean your car. I spent about $8 on that useless machine, and there was still a layer of dirt on my front/rear bumper, side skirts, and grill. Best thing to do if you're on a budget is buy one of these [microfiber wash mitt] (http://www.amazon.com/Chemical-Guys-Chenille-Microfiber-Scratch-Free/dp/B003TTL0TE/ref=lp_3020674011_1_2?srs=3020674011&ie=UTF8&qid=1454030316&sr=8-2) and the next time you head over to one of those self service car washes just pre-soak the car and the mit and scrub one panel at a time and rinse off the mitt with the pressure hose.
Edit : If you're not on a budget i would recommend doing the 2 bucket car wash method once a week or so. After about 4-6 months i would clay bar the vehicle and use ONR as a lubricant. There are many sealants out there, but only a few can last nearly 6 months. Chemical guys has some great sealants and waxes, but they have so many that it confuses the shit out of people. Save yourself the hassle and get some Jet Seal, some microfiber applicators and some microfiber towels and you're set.
Edit 2: Here is a list of tested waxes and sealants i found on the interwebs a few weeks back http://www.detailingworld.co.uk/forum/showthread.php?t=85205
These have been shown to have lasted more than 4 months
"Autoglym Extra Gloss Protection
Chemical Guys: M-Seal, Jetseal 109, Speed Amor
Klasse AIO and Sealant Glaze
Hi Temp Paste
Zaino AIO, Z2 and Z5
Wolfgang Deep Gloss Sealant."
Awesome, good luck with it and feel free to PM me if you have any questions. If you buy from Crutchfield then I believe they'll send you a PDF with instructions on removing door panels, head unit, etc. I have one for the OB which should be the same as your Legacy and would be happy to email it or Dropbox it to you if you're not going with Crutchfield.
Definitely have some trim removal tools before you get started. You can get them for a few dollars on Amazon or Harbor Freight. Makes removing panels easier without scratching or creasing them like you might with a screwdriver.
Menzerna Micro Polish SF 4500 - An extremely gentle polish used to prep paint prior to sealing/wax. Works extremely well with Subaru's soft paint.
Chemical Guys JetSeal 109 - No experience with this yet, but good reviews. I'm looking into a few other options for my first paint sealant (just prior to winter). Adds an additional layer of protection between the wax and clear coat.
Colinite 845 - Best wax I've found. Durable, easy to apply and even smells good. Wax is the first line of defense between the elements and your paint. I wax my current vehicle once a month on average. It depends on the weather if I have to do it more/less often. Rule of thumb for me is to re-apply when it stops beading.
I use the Meguiar's Complete Car care kit which comes with a "quick detailer" similar to the above. I can't attest for the lucas slick mist stuff, but the quick detailer does look good.
For a full detail, I'll wash the car, then use the quick detailer and clay bar to get rid of any excess dirt, etc. Then use the actual wax from the kit and finish up with the headlight restoration stuff if needed. Makes the WRX look great. :) Hope that helps!
The first thing I would try is this:
Meguiar's Ultimate Compound
Meguiar's X3070 Soft Foam 4" Applicator Pads
Meguiar's X2020 Supreme Shine Microfiber Towels
All 3 of those together is under $20 (need to spend $25 since one is an add on item). This stuff is amazing for scratches and paint in general. While it won't make your car showroom ready, it will make it look much better and is totally worth the $20.
Essentially what you do is first make sure the area is clean, then apply the compound to the pad and rub the compound on your car using circular motions. After you do that for a minute or two, use the towel to remove the compound form the car.
You're getting ripped off at $2000, so $3,000 is astronomical.
My local subaru shop "not a dealer" does HG replacements starting at $900. There are often a few extra parts needed, so it can go up to $1,300, but that isn't often. They do great work and specialize in Subaru... I'm sure there is a similar shop in your area
With a new HG and some Subaru Coolant System Conditioner it should run 200,000 MORE miles.
Honestly, if you picked up a Subie with 78K for less than $3k, boy did you score... It's totally worth the REASONABLE HG replacement.
yep i use a rotary buffer to buff, then [NuFinish] (http://www.amazon.com/Nu-Finish-Liquid-Car-Polish/dp/B000BPSW7C/ref=sr_1_1?s=automotive&ie=UTF8&qid=1408709206&sr=1-1&keywords=nu+finish) to polish. I'm sure any good polish will work, but that's what i use. and i messed up my comment above. You buff, THEN polish.
Also, if you don't have a spray gun, you can use a 2k bomb clear can not be found in stores. it's does better than a normal spray can of clear coat. a normal spray can probably wouldn't look too bad, but the 2k stuff will do better. the 2k can has a hardener that makes the lens much more UV resistant to fading. Since you seem like you are going to try this: let the clear coats sit and dry a day, then run that over with a 2k sandpaper before you buff then polish it.
There is a product (I use meguiar's brand) called compound that you can use to minimize the appearance of swirls if applied by hand, and if done with a dual action polisher will remove them completely. It is also great for removing shallow scratches in clear coat and general clear coat issues (aside from flaking and scratches that are deep). Check out /r/AutoDetailing for more info :)
You can go to autozone or wherever they check for you then look up online as code is generic. Each brand has their own specific meaning for the code. Before my cobb I used a Bluetooth obd2 reader 20$ online then used torque app from Android store free version to check and clear codes. It also does some pretty cool stuff for the paid version. The obd2 reader is small which I liked. I had 1 like this. https://www.amazon.com/BAFX-Products-34t5-Bluetooth-Android/dp/B005NLQAHS
Oh man, I know exactly how you feel! My 2.5i OB started misfiring like crazy last spring and it was a pain trying to diagnose it - I used injector cleaner, valve cleaner, cleaned my MAF and intake, swapped my MAF, and a ton of other things...finally decided to go for the plugs and wires, and after taking out the old ones found that my cylinder #4 wire and plug were dead - put in new plugs and wires all around, and it was like having a new car! I never would have suspected it to be the plugs because the car started and idled absolutely fine, but now I know!
Also, this is a lifesaver when swapping out spark plugs:
http://www.amazon.com/gp/aw/d/B0014ZVSVK/ref=redir_mdp_mobile?refRID=1406E10SHZEDKB3XHWDP&ref_=pd_sim_auto_3
Love your OB by the way. Cheers!
if you have a power drill, get the 3m restoration kit. it looks like this.
http://www.amazon.com/3M-39008-Headlight-Restoration-System/dp/B001AIZ5HY/ref=sr_1_1?ie=UTF8&qid=1396424163&sr=8-1&keywords=3m+restoration+headlight+kit
i mean you dont have to have a drill, but it would make it easier.
this is what mine looks like before and after. haha
http://i.imgur.com/R78vYXY.jpg
Not low on coolant √ So that sounds promising. I already have a new thermostat and will replace tomorrow. I just didnt want to drain the whole system again. Is the Subaru Coolant Conditioner something I should add as well?
Will check on the heater core hoses and update.
Thanks so much for your help!
Timing belt is a must because if it breaks, your engine is fucked. Its also the type of thing that I recommend leaving to a professional, though not necessarily a dealership. My Subaru dealership wanted $850 for a timing belt replacement. I went to a local mechanic who was well-regarded and I got it done for half that. Make sures its a Gates belt.
You could probably do all the other stuff yourself with a little help from forums and YouTube videos. I'd definitely replace the coolant because clean coolant is one of the best ways to avoid head gasket problems. Spark plugs are super easy if you take your time (and this thing makes the job even easier). I'd go ahead and replace plug wires too.
Transmission fluid is pretty easy, but don't forget to get an extra quart for the rear differential.
As far as brakes and rotors, you don't really know until you look at them and see.
I'm glad you like it, thanks :)
I'll do my best to answer as I'm at work now and will provide links later.
I got the light bar as well as the mounting brackets off of Amazon (https://www.amazon.com/gp/product/B00NXL4F4A/ref=oh_aui_detailpage_o09_s01?ie=UTF8&psc=1 https://www.amazon.com/gp/product/B0175W0NCA/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1).
I'm not entirely sure what exactly the multi-link is meant for as I didn't end up installing the lift. I was pressed for time so I had my local Subaru mechanic install it. He said it went on without any problems.
Yepp, stock rims plasti-dipped black! Currently, I have Blizzaks ws80s because I went on a cross-country winter road trip earlier in the year, but I will be replacing them very soon. Most likely a more Hwy friendly tire with a little bit of aggressiveness for the mud.
I really dig your color and keep us posted when you start getting down and dirty with your beast ;)
Bummer. To answer your question, I use this one, and it works great. Also has GPS/Google Maps integration. Looks like it's super cheap now. I paid $170 for it a year ago, and even at that price, I think it's worth it.
I use Meguiar's products on my wrx and it keeps it looking brand new.
Honestly, buy the Meguiars's Complete Car Care kit, its like $40 on amazon and has every cleaning product imaginable, and I've used all the sprays and gels countless times.
http://www.amazon.com/Meguiars-Complete-Car-Care-Kit/dp/B0012ZEZ8A
Pretty sure it was these. Make sure you get the right ones to fit your roof rack bars. https://www.amazon.com/Auxmart-Bullbar-Nudge-Mounting-Bracket/dp/B0175W0NCA/
I've got this one for my 6 Plus, it works well with the phone in Portrait. I really enjoy it.
http://www.amazon.com/WizGear-Universal-Magnetic-Swift-SnapTM-Technology/dp/B00PGJWYJ0/ref=sr_1_4?s=wireless&ie=UTF8&qid=1453242228&sr=1-4&keywords=Magnetic+phone+mount
I've got a Otterbox Commuter style case on my phone, so I stuck one of the round metal discs on the back of the case. (Also comes with rectangle ones) If I placed it more towards the middle, I'm sure I could easily place my phone in landscape.
Nice! As preventative maintenance Subaru sells this stuff. It is rebranded Holt's Radweld. Small bottle. I threw some in my daughter's Subie just in case. Can't hurt I guess. If the headgaskets on the replacement motor were original units then it is probably just a matter of time before they go too. But, you never know. This magic Subie juice is supposed to help.
​
https://www.amazon.com/Subaru-SOA635071-Coolant-System-Conditioner/dp/B00IGZP2UE/ref=sr_1_3?crid=3GZ6ZTJOIDK4X&keywords=subaru+radiator+conditioner&qid=1554864612&s=gateway&sprefix=subaru+radiator+%2Caps%2C328&sr=8-3
I used the 3m kit. Works really well, it's fairly involved but is the correct way to do it. You also will have to put some sealant or cover on it to prevent it happening again. I got the xpel kit. Ammonyc has a good guide.
XPEL H3804C Clear Headlamp and Fog Lamp Protection Kit https://www.amazon.com/dp/B0007X7R9C/ref=cm_sw_r_cp_apa_C47uzb6FAQ6TH
3M 39008 Headlight Lens Restoration System https://www.amazon.com/dp/B001AIZ5HY/ref=cm_sw_r_cp_apa_j07uzbTH2YH63
https://youtu.be/uqOKmZ9mMfc
I just bought this one for my 2000 Impreza: http://www.amazon.com/gp/product/B005NLQAHS/ref=oh_details_o03_s00_i00?ie=UTF8&psc=1
It works great and it's pretty cheap!
If you don't have record of the last time the coolant was changed, change it. To play it safe I'd use Subaru Super Coolant (blue) with Subaru Cooling System Conditioner (Holts Radweld).
In the event you need to do the head gasket, Speed Academy has an amazing video I used to do mine.
Call me crazy, but when I blew my engine I elected to keep the car. Subaru has engineered a family sedan way better than it has to be for the market and it shows.
I need to do some digging to find the invoices of parts I purchased; I'll update this reply as I find them.
Found this on Amazon in another thread: https://www.amazon.com/Subaru-Fixed-Crossbar-Impreza-E361SFJ000/dp/B008216AVM
​
I'm in the same boat as you, 2012 Impreza hatch. Last season I just threw skis/snowboards in the back, but I'm looking into making things a bit more comfortable for my passengers this season. Looked on the Thule website, and the crossbars alone are $500+ so this looks pretty good.
I installed the OEM roof rack for my Impreza. Plus, I finally installed the LED light strip that /u/cuterocky recommended. Bonus: the roof rack came with a nice torx driver.
Roof Rack: https://smile.amazon.com/dp/B008216AVM
LED Strip Kit: http://www.diodedynamics.com/store/catalog/product/view/id/22532/s/flexlight-trunk-led-strip/category/812/
This is what I'm going with, seems to be a great product at a good price http://www.amazon.com/Meguiars-Complete-Car-Care-Kit/dp/B0012ZEZ8A/ref=sr_1_2?s=automotive&ie=UTF8&qid=1370274385&sr=1-2
There is n n1 muffler that sells for like 30 bucks..it sounds pretty low and rumbly if that's what you're looking for..ill find the link in a bit
http://www.amazon.com/ONESTOPSHOPS-Muffler-Universal-Removable-Silencer/dp/B0043AV4NK/ref=sr_1_1?ie=UTF8
When I get my Impreza in a month and a half, I plan on giving it a coat of wax. Seems like a good idea. I've heard this wax is good...
Nu Finish Liquid Car Polish https://www.amazon.com/dp/B000BPSW7C/ref=cm_sw_r_cp_api_cSPAybN24F9GC
Not sure what else, I'm looking for recommendations too.
17 sti with a vent phone holder too.
https://www.amazon.com/WizGear-Universal-Swift-Snap-Technology-Smartphones/dp/B00PGJWYJ0/ref=sr_1_4?ie=UTF8&qid=1485579247&sr=8-4&keywords=vent+clip+phone+holder
that clip to be exact; works fine. I do find that spinning the clip every now and then helps with holding better
Awesome! I'm thinking about this one as a beginner step. I wanna learn more about led bars and what makes them good. If the cheap light bar fails I dont have a problem with pulling it apart to see what went wrong ant attempting to repair it. Thanks for the input!
I just ignore the light in the winter, but the ATEQ QuickSet looks like the most economical solution. $150 at Amazon
i just bought this one off amazon but it's for android only. I'm assuming you're using an iphone though? I honestly don't know that much about app radio units, All i know is the dashcommand app is listed on pioneers website for app radio. I believe for dashcommand on iphone you need a wifi obd 2 dongle (same idea as the one i linked to, only wifi).
http://www.amazon.com/BAFX-Products-Bluetooth-diagnostics-Android/dp/B005NLQAHS/ref=cm_srch_res_rtr_1 Thats the one I bought. Many of the reviews from users say it works great with Subaru. Quite a few of them specifically sited they worked with their 2011 WRX. Thats why I chose that specific adapter.
I priced out a new set on TireRack with TPMS and it was about a grand. But then I have to deal with either purchasing a reset tool like this one:
http://www.amazon.com/ATEQ-QuickSet-TPMS-Reset-Tool/dp/B008SCWXN4
Or have the dealership do a TPMS reset. Pretty much a PITA for something as simple as swapping wheels. I probably would have pulled the trigger already if it wasn't for the TPMS hurdles.
you need the fixed crossbar set from subaru. it's made by thule and exact same parts as the set bought from thule but like 1/3rd the price at about $175-ish
https://www.amazon.com/Subaru-Fixed-Crossbar-Impreza-E361SFJ000/dp/B008216AVM
> some compound
Are you taking about something like this: https://smile.amazon.com/Meguiars-G17216-Ultimate-Compound-15-2/dp/B001O7PNNM/ref=smi_www_rco2_go_smi_g2609328962?_encoding=UTF8&%2AVersion%2A=1&%2Aentries%2A=0&ie=UTF8?
This will make your life easier: http://www.amazon.com/GearWrench-80546-8-Inch-6-Inch-Swivel/dp/B0014ZVSVK/ref=sr_1_1?s=hi
20 dollar Bluetooth/WiFi code reader off of amazon.
https://www.amazon.com/BAFX-Products-Bluetooth-Diagnostic-Scanner/dp/B005NLQAHS/ref=mp_s_a_1_3?ie=UTF8&qid=1539905054&sr=8-3&pi=AC_SX236_SY340_QL65&keywords=Code+Readers+bluetooth&dpPl=1&dpID=416SaTHOpkL&ref=plSrch
Edit: well $24~
I use a magnetic phone mount that sits in a vent. It's quite sturdy. It comes with 3 magnets, 2 with a sticky side and 1 without. Just slip one of the magnets between your phone case and it's ready to go.
https://www.amazon.com/WizGear-Universal-Swift-Snap-Technology-Smartphones/dp/B00PGJWYJ0/ref=sr_1_4?s=wireless&ie=UTF8&qid=1472691883&sr=1-4&keywords=magnetic+car+mount
Basically the 3M kit which works amazingly well.
All the lights are from Amazon.
Top bar
Bottom bar
Round lights
Did you change out your coolant with Subaru coolant and put in the Subaru coolant conditioner after your head gasket job? The conditioner is very important.
Example:
http://www.amazon.com/Subaru-SOA635071-Coolant-System-Conditioner/dp/B00IGZP2UE
Since I haven't seen anybody address your data logging question, I highly suggest the Torque app available on android paired with a $25 OBDII reader from amazon. Plus then you don't have to pay $50-$250 on a scanner tool. I've got mine setup to start logging as soon as it connects to my car every time i start it up.
http://torque-bhp.com/
https://play.google.com/store/apps/details?id=org.prowl.torque
http://www.amazon.com/BAFX-Products-Bluetooth-diagnostics-Android/dp/B005NLQAHS/
obd ii bluetooth from amazon- $23. Maybe worth a try to reset on your own and you can read/reset fault codes using Torque Pro app, don't know if it voids warranty. worth reading into.
I have this thing: http://www.amazon.com/gp/product/B005NLQAHS/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
It works well with my car and torque, but my car is older than your car.
I have one for my Outback, and I'm never looking back to using a normal screw. Different models also have different styles (long tip, etc), so you're bound to find something that will still have adequate clearance even for off-roading. I personally use the F-108N, which has a long tip, and it still tucks away inside the factory skid plate.
As for not being able to drain completely...I'd say it depends. My OB has the drain hole facing the rear-ish of the car, and I have my car on ramps during oil changes, so gravity kinda does the work of clearing out that last little bit for me.
This kit. http://www.amazon.com/gp/aw/d/B001AIZ5HY?pc_redir=1411424872&robot_redir=1
Meguiar's Ultimate
I suppose that a Fumoto oil valve would have to be next!
Hold on I'll have to look it up in my past order
Edit:: http://www.amazon.com/BAFX-Products-Bluetooth-diagnostics-Android/dp/B005NLQAHS/ref=sr_1_1?ie=UTF8&qid=1418260923&sr=8-1&keywords=bafx+bluetooth+obd2
Apparently this only works with Android
Here is the one I bought.
http://www.amazon.com/Masione-Flood-Beam-3W-LED-120W-9000-Waterproof/dp/B00HNP91VO
http://www.amazon.com/Subaru-SOA635071-Coolant-System-Conditioner/dp/B00IGZP2UE
https://www.amazon.com/WizGear-Universal-Swift-Snap-Technology-Smartphones/dp/B00PGJWYJ0/ref=sr_1_2?ie=UTF8&qid=1478664014&sr=8-2&keywords=magnet+mount+vent
i put it on my left vent.
I have one of those bluetooth ones and use Torque Pro on my Android phones. I have had no issues.
ODBII tool (there is a small one, I havent tested it)
Torque Pro
Thanks, i heard a ton about Meguires so I went ahead and got the complete kit for starters.
Ill check into your suggestions next time i buy product.
Is there anything im really missing in that bundle?