Best products from r/toolboxmods
We found 11 comments on r/toolboxmods discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 11 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Lisle 40120 1/4" Magnetic Socket Holder
- Twenty-six socket compartments allow you to keep your 1/4" standard and deep sockets in one convenient holder
- Holds sockets up to 5/8" or 15 millimeter
- Design of holders leaves sockets exposed for easy identification
- Powerful magnets securely hold sockets in tray, and tray to any steel surface
- Made of strong ABS plastic
Features:
▼ Read Reddit mentions2. URBEST Inlet Module Plug 5A Fuse Switch Male Power Socket 10A 250V 3 Pin IEC320 C14
- Total Size : 5.8 x 4.8 x 3.4cm / 2.3" x 1.9" x 1.3"(LxWxH);Plug Type : 3 Pin IEC320 C14
- Product Name : Power Socket w Switch Fuse;Material (External) : Plastic, Metal;Color : Red, Silver Tone, Silver Tone
- Weight : 24g;Package Content : 1 x Power Socket
- Hole Center Distance : 3.9cm / 1.5";Bottom Size : 4.7 x 2.7cm / 1.9" x 1.1"(LxW)
- Voltage/ Current : 10A, 250V AC;Hole in Top Face Diameter : 0.42cm / 0.16"; Fuse Ampere: 5A
Features:
▼ Read Reddit mentions3. 6ft 18 AWG Nema 5-15P to Locking IEC C13 Auto-Lock
Features the patented IEC locking mechanism to keep your cords securely locked into place. Slide on the red tabs for easy disconnection.Universal Fit: No tools, hardware or installation required.These power cords are the standard cords used for monitors, computers, printers, scanners, TVs, sound sys...
▼ Read Reddit mentions4. Mechan 80pc Portable Socket Organizer Tray – Premium Quality Socket Tray – Adjustable Socket Holder – Sturdy Socket Rails w/Spring Loaded Ball Bearing Socket Clips for Tool Box Organization
- ★ KEEP YOUR TOOLBOX ORGANIZED: Keep your socket wrenches organized and within easy reach with this premium socket organizer. The sturdy socket tray can hold up to 80 sockets: 20 x 1/4", 30 x 3/8" and 30 x 1/2" drive, and it can easily fit in your tool box, drawer, and car trunk. The socket holder tray will help you organize your sockets so that you won’t get frustrated and lose your patience every time you’re searching for a specific socket drive!
- ★ 10 STURDY SOCKET CLIPS INCLUDED: For your convenience, apart from the impact socket rail we’re also giving you a set of 10 3/8-inch drive clips replacement with the sturdiest design! These socket clips will securely hold your socket wrenches, whether the impact socket tray is placed on a table or held in an upright, vertical position. So if you want to carry the socket rail around, you can simply use the folding side handle!
- ★ ADJUST THE SOCKET HOLDER TO YOUR NEEDS: Do you like your sockets to be organized based on their size? Do you use some sockets more than others? Based on your needs and preferences, you can change the organization of your socket organizer tray whenever you want! The socket clips have a spring loaded ball bearing design that allows them to slide on the large socket holder and make your job easier!
- ★ THE ONLY SOCKET TRAY YOU’LL EVER NEED: Whether you’re a professional craftsperson or you simply own many tools, you should definitely invest in this adjustable socket organizer! Made with premium, heavy duty materials, our socket holder organizer is incredibly durable, so you will never have to replace it with a new one! Years from now, your tool box will have more and new tools, but the wrench socket holder will be the same!
- ★ 100% HASSLE-FREE PURCHASE: This amazing heavy duty socket organizer is under a 100% money back guarantee that ensures your complete and utter satisfaction. Is for any reason you’re not satisfied with robust design and practicality of our wrench socket organizer, you can get a full refund – no questions asked. As you can tell, this is a completely risk free purchase, so don’t hold back! Place an order today!
Features:
▼ Read Reddit mentions5. BIG RED MTOSDH15RT Torin Tool Storage Organizer: Magnetic Screwdriver Rack
- Holds up to 15 screwdrivers
- High powered magnets hold screwdrivers
- Magnetic backing secures the organizer onto most metal surfaces
- Great for keeping screwdrivers organized
- Keeps tools easily accessible
- Holds up to 15 screwdrivers
- High powered magnets hold screwdrivers
- Magnetic backing secures the organizer onto most metal surfaces
- Great for keeping screwdrivers organized and easily accessible
Features:
▼ Read Reddit mentions6. FastCap Long Nosed Marker, Black
- Long thin tip has a diameter of 1/16
- Black, permanent, waterproof marker
- 1-1/8
- Reach tight spots with ease
Features:
▼ Read Reddit mentions7. Stanley 033026R Pro Contractor Chest
- The portable tool box has a removable organizer so all small parts are organized and accessible
- Unique organizer with STANLEY branding on lid of the mechanic tool box and long lasting IML (In Mold Labeling)
- Power tools can be easily accessible from bottom bin of tool box organizers and storage
- 2/3 size portable tray allows for storage of larger/longer tools
- V groove on top lid for onsite sawing needs
- 200lb weight capacity
Features:
▼ Read Reddit mentions8. Tempo Communications 1822 Universal Round Cable Slitter, 0.18-1-Inch
Strip and slit round cable with diameter of 0.18 - 1.0" (4.5 - 25.4mm)Strip power, telecommunication & multi-media bundled cablesBlade rotation knob changes slitting direction for circular, spiral or longitudinal slitsWorks on PVC, rubber & nylon cablesDoes not work on XLP, polyethylene & polypropyl...
▼ Read Reddit mentions9. Bucket Boss Gatemouth 24 Tool Bag in Brown, 60024, 20 liters
Traditional Gatemouth Series wide, zippered openingDurable webbing carry handles16 pocketsOversized industrial zippersPadded, webbing-reinforced bottom
▼ Read Reddit mentions10. ATD Tools 99750 4-Piece 8 SAE Size X-Large Ratcheting Wrench Set
- Offset box end gear provides more surface contact and access to recessed fasteners
- 72-tooth ratcheting system for high torque and 5 degree swing arc for operation in tight areas
- Sliding switch button for quick change ratcheting direction
- 180 degree flex feature and extra-long reach allows access to hard-to-reach places
- 8 SAE sizes 5/16 inch through 3/4 inch
Features:
▼ Read Reddit mentions11. MLTOOLS Pliers Cutters Organizer Pro - Made in USA - Pliers Rack - P8248 x 2
- CONVENIENT PLIER ORGANIZER – Organize your pliers/cutters in an orderly fashion, prevent messy drawers or toolboxes, and place them in an easily accessible upright manner with MLTOOLS pliers cutters organizer pro that is designed to help you get rid of your storage woes! (Tools NOT included)
- SUPERIOR PLIERS ORGANIZER RACK – With a non-slip rubber base, our pliers organizer for toolbox drawer firmly holds tools and keeps them in place. Plier rack organizer can hold up to 10 tools and has an open face design that lets you view the tools that you need – instantly fetch what you need!
- JUST THE RIGHT SIZE – Plier organizer for toolbox Measures 10” x 3.5” x 2.75” to fit 3” H drawers, toolboxes, shelves, and more. Each slot in the plier drawer organizer measures 7/8” wide to accommodate tools of varying thickness – BEST pliers organizer rack!
- SAFE PLIER DRAWER ORGANIZER – Made with premium quality materials in the USA, our pliers organizer for toolbox is fuel and solvent resistant. Pliers rack & organizer for tool drawer storage is extremely durable and can withstand everyday wear/tear.
- PERFECT GIFT – Plier storage organizer makes a great gift to all DIY enthusiasts who like to do their own repairs and own a lot of tools. Pliers organizer for toolboxes comes with a lifetime guarantee so that you can buy worry-free – ESSENTIAL 10-tool pliers organizer rack for all!
Features:
▼ Read Reddit mentionsTop comments mentioning products on r/toolboxmods:
Summary
1. Lisle 40120 1/4" Magnetic Socket Holder
- Twenty-six socket compartments allow you to keep your 1/4" standard and deep sockets in one convenient holder
- Holds sockets up to 5/8" or 15 millimeter
- Design of holders leaves sockets exposed for easy identification
- Powerful magnets securely hold sockets in tray, and tray to any steel surface
- Made of strong ABS plastic
Features:
▼ Read Reddit mentions2. URBEST Inlet Module Plug 5A Fuse Switch Male Power Socket 10A 250V 3 Pin IEC320 C14
- Total Size : 5.8 x 4.8 x 3.4cm / 2.3" x 1.9" x 1.3"(LxWxH);Plug Type : 3 Pin IEC320 C14
- Product Name : Power Socket w Switch Fuse;Material (External) : Plastic, Metal;Color : Red, Silver Tone, Silver Tone
- Weight : 24g;Package Content : 1 x Power Socket
- Hole Center Distance : 3.9cm / 1.5";Bottom Size : 4.7 x 2.7cm / 1.9" x 1.1"(LxW)
- Voltage/ Current : 10A, 250V AC;Hole in Top Face Diameter : 0.42cm / 0.16"; Fuse Ampere: 5A
Features:
▼ Read Reddit mentions3. 6ft 18 AWG Nema 5-15P to Locking IEC C13 Auto-Lock
Features the patented IEC locking mechanism to keep your cords securely locked into place. Slide on the red tabs for easy disconnection.Universal Fit: No tools, hardware or installation required.These power cords are the standard cords used for monitors, computers, printers, scanners, TVs, sound sys...
▼ Read Reddit mentions4. Mechan 80pc Portable Socket Organizer Tray – Premium Quality Socket Tray – Adjustable Socket Holder – Sturdy Socket Rails w/Spring Loaded Ball Bearing Socket Clips for Tool Box Organization
- ★ KEEP YOUR TOOLBOX ORGANIZED: Keep your socket wrenches organized and within easy reach with this premium socket organizer. The sturdy socket tray can hold up to 80 sockets: 20 x 1/4", 30 x 3/8" and 30 x 1/2" drive, and it can easily fit in your tool box, drawer, and car trunk. The socket holder tray will help you organize your sockets so that you won’t get frustrated and lose your patience every time you’re searching for a specific socket drive!
- ★ 10 STURDY SOCKET CLIPS INCLUDED: For your convenience, apart from the impact socket rail we’re also giving you a set of 10 3/8-inch drive clips replacement with the sturdiest design! These socket clips will securely hold your socket wrenches, whether the impact socket tray is placed on a table or held in an upright, vertical position. So if you want to carry the socket rail around, you can simply use the folding side handle!
- ★ ADJUST THE SOCKET HOLDER TO YOUR NEEDS: Do you like your sockets to be organized based on their size? Do you use some sockets more than others? Based on your needs and preferences, you can change the organization of your socket organizer tray whenever you want! The socket clips have a spring loaded ball bearing design that allows them to slide on the large socket holder and make your job easier!
- ★ THE ONLY SOCKET TRAY YOU’LL EVER NEED: Whether you’re a professional craftsperson or you simply own many tools, you should definitely invest in this adjustable socket organizer! Made with premium, heavy duty materials, our socket holder organizer is incredibly durable, so you will never have to replace it with a new one! Years from now, your tool box will have more and new tools, but the wrench socket holder will be the same!
- ★ 100% HASSLE-FREE PURCHASE: This amazing heavy duty socket organizer is under a 100% money back guarantee that ensures your complete and utter satisfaction. Is for any reason you’re not satisfied with robust design and practicality of our wrench socket organizer, you can get a full refund – no questions asked. As you can tell, this is a completely risk free purchase, so don’t hold back! Place an order today!
Features:
▼ Read Reddit mentions5. BIG RED MTOSDH15RT Torin Tool Storage Organizer: Magnetic Screwdriver Rack
- Holds up to 15 screwdrivers
- High powered magnets hold screwdrivers
- Magnetic backing secures the organizer onto most metal surfaces
- Great for keeping screwdrivers organized
- Keeps tools easily accessible
- Holds up to 15 screwdrivers
- High powered magnets hold screwdrivers
- Magnetic backing secures the organizer onto most metal surfaces
- Great for keeping screwdrivers organized and easily accessible
Features:
▼ Read Reddit mentions6. FastCap Long Nosed Marker, Black
- Long thin tip has a diameter of 1/16
- Black, permanent, waterproof marker
- 1-1/8
- Reach tight spots with ease
Features:
▼ Read Reddit mentions7. Stanley 033026R Pro Contractor Chest
- The portable tool box has a removable organizer so all small parts are organized and accessible
- Unique organizer with STANLEY branding on lid of the mechanic tool box and long lasting IML (In Mold Labeling)
- Power tools can be easily accessible from bottom bin of tool box organizers and storage
- 2/3 size portable tray allows for storage of larger/longer tools
- V groove on top lid for onsite sawing needs
- 200lb weight capacity
Features:
▼ Read Reddit mentions8. Tempo Communications 1822 Universal Round Cable Slitter, 0.18-1-Inch
Strip and slit round cable with diameter of 0.18 - 1.0" (4.5 - 25.4mm)Strip power, telecommunication & multi-media bundled cablesBlade rotation knob changes slitting direction for circular, spiral or longitudinal slitsWorks on PVC, rubber & nylon cablesDoes not work on XLP, polyethylene & polypropyl...
▼ Read Reddit mentions9. Bucket Boss Gatemouth 24 Tool Bag in Brown, 60024, 20 liters
Traditional Gatemouth Series wide, zippered openingDurable webbing carry handles16 pocketsOversized industrial zippersPadded, webbing-reinforced bottom
▼ Read Reddit mentions10. ATD Tools 99750 4-Piece 8 SAE Size X-Large Ratcheting Wrench Set
- Offset box end gear provides more surface contact and access to recessed fasteners
- 72-tooth ratcheting system for high torque and 5 degree swing arc for operation in tight areas
- Sliding switch button for quick change ratcheting direction
- 180 degree flex feature and extra-long reach allows access to hard-to-reach places
- 8 SAE sizes 5/16 inch through 3/4 inch
Features:
▼ Read Reddit mentions11. MLTOOLS Pliers Cutters Organizer Pro - Made in USA - Pliers Rack - P8248 x 2
- CONVENIENT PLIER ORGANIZER – Organize your pliers/cutters in an orderly fashion, prevent messy drawers or toolboxes, and place them in an easily accessible upright manner with MLTOOLS pliers cutters organizer pro that is designed to help you get rid of your storage woes! (Tools NOT included)
- SUPERIOR PLIERS ORGANIZER RACK – With a non-slip rubber base, our pliers organizer for toolbox drawer firmly holds tools and keeps them in place. Plier rack organizer can hold up to 10 tools and has an open face design that lets you view the tools that you need – instantly fetch what you need!
- JUST THE RIGHT SIZE – Plier organizer for toolbox Measures 10” x 3.5” x 2.75” to fit 3” H drawers, toolboxes, shelves, and more. Each slot in the plier drawer organizer measures 7/8” wide to accommodate tools of varying thickness – BEST pliers organizer rack!
- SAFE PLIER DRAWER ORGANIZER – Made with premium quality materials in the USA, our pliers organizer for toolbox is fuel and solvent resistant. Pliers rack & organizer for tool drawer storage is extremely durable and can withstand everyday wear/tear.
- PERFECT GIFT – Plier storage organizer makes a great gift to all DIY enthusiasts who like to do their own repairs and own a lot of tools. Pliers organizer for toolboxes comes with a lifetime guarantee so that you can buy worry-free – ESSENTIAL 10-tool pliers organizer rack for all!
Features:
▼ Read Reddit mentions
I got them at Sears, but you can also find them on Amazon and many other tool retailers.
https://www.amazon.com/dp/B0002STST4/ref=cm_sw_r_cp_apa_mE1mzb4FHCNG2
They're made by Lisle, red and black. Kind of pricey but they're very well made and IMO the best socet storage solution on the market
Mount your powerstrip on top, route the wiring into the underside of the top and route it forward, then mount a low profile surface mount switch on the underside of the top so you can just open the drawer and turn it on and off, you can then route it out the back of the box with just a cord and a plug or you can mount an recessed male plug on the back of the box that you can plug a cord into.
I used an IEC plug for the back of my powerbank project and was pretty happy with how it turned out. I used a locking IEC cord to come out of it which I can put a twist lock plug on for cord drops, etc.
This style is what I use and recommend. Can be easily reconfigured and is very efficient on space. But depending on the actual dimensions of your box you may need something different.
Mechan Tools 80pc Portable Socket Organizer Tray - Premium Quality Socket Tray - Adjustable Socket Holder - Sturdy Socket Rails w/Spring Loaded Ball Bearing Socket Clips For Tool Box Organization https://www.amazon.com/dp/B07D136Y9B/ref=cm_sw_r_cp_api_i_BJ2RDbKRGVPZH
Look at using something like this to keep them from rolling around.
I’ve got a few and they’re fantastic
Torin Big Red Tool Organizer: Magnetic Screwdriver Rack https://www.amazon.ca/dp/B00DS3GK0A/ref=cm_sw_r_cp_api_7p8OBb0VNAGGS
I found this long nose marker very helpful when shadowing some of the drawers in my tool box. https://www.amazon.com/dp/B002NQPEE6/
Also, fresh box cutters helped greatly.
Couple of the small rollable tote boxes. Throw a piece of plywood in your back seat so u don't tear up the seats and they also slide in and out easily.
Stanley 033026R Pro Contractor Chest https://www.amazon.com/dp/B0050034P8/ref=cm_sw_r_other_apa_4wBbAbHVS39KN
Cable splitter tool. Worth its weight in gold.
https://www.amazon.com/gp/aw/d/B000099O6A/ref=mp_s_a_1_1?ie=UTF8&qid=1520880907&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=paladin+cable+stripping+tool&dpPl=1&dpID=31CpJ8v0FuL&ref=plSrch
Look at bucket boss tool bags. They are expensive but great quality. This one fits enough tools to take apart most of my car in my trunk, including at 24" breaker bar.
https://www.amazon.com/Bucket-Boss-60024-Gatemouth-LongBoy/dp/B00GK4TRK4
Edit. I have also put over 80# in it and it took the weight no problem.
ATD Tools 99750 4-Piece 8 SAE... https://www.amazon.ca/dp/B007SM3TP6?ref=ppx_pop_mob_ap_share
https://www.amazon.com/gp/aw/d/B016TU4P00?psc=1&ref=ppx_pop_mob_b_asin_title