Best products from r/wood
We found 10 comments on r/wood discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 10 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Rapunzel Mandel-Tonka Creme, 1er Pack (1 x 250 g) - Bio
- Rapunzel Mandel-Tonka Creme, 1er Pack (1 x 250 g) - Bio
Features:
2. Understanding Wood: A Craftsman's Guide to Wood Technology
- Taunton Press
Features:
3. Old English 062338080468 Scratch Cover for Dark, 8 fl oz Bottle, Wood Polish, kkkk
- Old English Scratch Cover restores damaged wood
- Helps restore wood surfaces
- Hides unsightly scratches & nicks
- Available in formulas for light woods or for dark woods
- For use on: kitchen cabinets, wood furniture and wood paneling
Features:
4. Thompsons Water Seal A21741 1-Gallon Rustic Red Advanced Tinted Wood Protector
Waterproofer productUse on decks, fences, outdoor furniture and exterior woodMaximum strength one coat waterprooferAdvanced protection against water damageExceptional, long lasting beading and waterproofing
5. PC Products PC-Petrifier Water-Based Wood Hardener, 1gal, Milky White 128442
Wood Hardener repairs wood damaged by insects or rotIt is a liquid that is brushed, sprayed or injected into the pores of the woodNo mixingPrepares wood for filling, priming and paintingImprove the hardness and minimize damaged wood removalCleans up with watermaterial type: Liquid
6. WEN 4208 8 in. 5-Speed Drill Press
- Includes a 1/2-inch keyed chuck and onboard key storage
- Operates at 5 different speeds: 740, 1100, 1530, 2100, 3140 RPM
- Spindle travels up to 2 inches with easy to read, locking linear depth stops for accurate and repeatable drilling operations.Cord Length (ft.):6
- Durable 1/3 HP induction motor develops ample torque and power
- 6-1/2 x 6-1/2" worktable is height adjustable and bevels up to 45 degrees left & right
- Swing: 8 inch. Motor: 120V, 60Hz. Horsepower: 1/3 HP.
Features:
7. Yonico 43019C 20mm Diameter Carbide Forstner Drill Bit 10mm Shank
This carbide forstner bit has a 20mm cutting diameter and a 10mm shank compatible with all standard drill and drill press chucks.Drill clean and accurate holes in solid wood, plywood and MDFConstructed with carbide tips for quality and longevityThe 10mm shank is compatible with all standard drill an...
8. Water-Base Wipe-On Polyurethane 16fl oz
Excellent DurabilityUltra Fast-DryingLow OdorEasy Water Clean-Up
9. Walnut Wood Cross & Adjustable Dark Brown Leather Necklace for Christian Men and Women. Simple 2" wooden cross is stamped with the christian fish (ichthys). Handmade in the USA!
10. Ram-Pro Furniture Markers Touch Up Repair System - 12Pc Scratch Restore Kit - 6 Felt Tip Wood Markers, 6 Wax Stick Crayons | Colors: Maple, Oak, Cherry, Walnut, Mahogany, Black
- Perfect repair set for vintage furniture
- Just retouch by drawing over scratches, nick or discoloration with this tool & watch them disappear permanently
- Large felt-tip furniture restore marker and paper wrapped wax stick premium kit contains a special carpenter quality stain to match wood finishes
- Instantly cover blemishes, scuffs, nicks on scratched wood, wood-veneer, desk furniture, floors, trim, cabinets, tables, bedposts, doors, frames, etc.
- 6 Large felt-tip touch up markers and 6 cover up wax crayons contain special stain to match 6 unique wood shades: cherry, mahogany, walnut, black, maple, and oak
Features:
Oh thank you for hinting me towards this! From what I just read about it, Cumaru could be it.
It is indeed really strong and heavy and I actually had to pre-bore before screwing - it just ripped when I did it with a drill that wasn't close enough to the size of the srew. It did smell nice when being worked, but I wasn't particularly reminded of vanilla or cinnamon. I also do not have blacklight around to test if it's actually fluorescent.
But I love the fact, that it's from the Tonka tree, it reminds me of this really tasty Almond-Tonka spread that is sold in some wholefood-shops around here (GER).
Source: http://www.wood-database.com/cumaru/
Thank you very much, for your input!
I have it. It is a really good book. If you can get past the internet joke, it's full of good information. I also have its sibling, Understanding Wood.
You might try some Old English on it. It's normally a scratch cover, but I've seen some success with water spot. If you have a wood working store near you, they should have some. Some hardware stores will carry it. Here is the Amazon link for it -- https://www.amazon.com/English-Scratch-Cover-Dark-Woods/dp/B002YBZZJE/ref=pd_sbs_121_4?_encoding=UTF8&pd_rd_i=B002YBZZJE&pd_rd_r=8NYR40D7YEV0T0EMDT8P&pd_rd_w=yrE4k&pd_rd_wg=EtESy&psc=1&refRID=8NYR40D7YEV0T0EMDT8P
So, I have pressure treated woods that I have used to create my retaining wall.
I used a sealant to seal but it also had red paint that now looks horrible (should've checked the box properly).
I wanted my wood to have similar stain as the wood in the picture. My guess is that the wood in the pics are not pressure treated oak like mine so mine won't have exact same stain, but I wanted to get as close as possible to this look.
Any help? I could get the stain from Home Depot, Amazon or Benzaim Moore shop.
I've had good results preserving rotted wood with this
Forstner bits.
A Drill Press like this one would allow you to control the depth of your cutting, accurately to within a millimeter.
Their rep told me I should use water based polyurethane. They didn't sell me the 'platinum protection' and a repair would cost 75$.
What's your opinion, how would I apply that? Would this do https://www.amazon.com/Water-Base-Wipe-On-Polyurethane-16fl-oz/dp/B001XQ20WG/ref=sr_1_7?ie=UTF8&qid=1501171069&sr=8-7&keywords=water+based+polyurethane and just wipe over it?
What would happen on the are that has already the coat?
This is it
Cross
I remember buying some clay-like stuff, for the woods scratches etc, and there was a pen that followed with it. Now, I am not the most artistic, but I somehow matched the shade and the color, and after a few weeks of just staying there, it blended in eventually. It is still visible, but not eye-popping, you have to literally squat down and see it. I’ll try to find that thing. And because it’s a little scratch, it’s not worth to change the planks because of it.
EDIT: This is the closest thing I could find. Obviously not ideal, but if you have that artistic side or can work with colors, I believe you’ll make wonders with it! ;)