Best products from r/wyzecam

I had the same problem. At first I thought about drilling a hole through my exterior wall and then running a long USB cable to an inside outlet. After realizing that this was all kinds of stupid, I looked into solutions like building my own 110AC to 5V DC USB converters using boards like this (https://www.ebay.com/itm/AC-DC-to-DC-Buck-Converter-Step-Down-Module-LM2596-Power-Supply-Output-DC1-5-27V-/321657019357?_mwBanner=1&_rdt=1) and tapping into the cables going to my exterior lights. Then I realized that with my amateur electrician skills, that would probably be a fire hazard. I ended up finding this light socket USB adapter for $50: https://smile.amazon.com/Toucan-Smart-Socket-Additional-Weatherproof/dp/B06ZYGPKJS/ref=sr_1_5?ie=UTF8&qid=1540343219&sr=8-5&keywords=Kuna+toucan

That's an extra smart socket for a webcam solution from Kuna called Toucan. And if you just need use it for the USB power, it would work but you'd need to leave your light on all the time. That's pretty suboptimal.

But, after researching the Toucan, I ended up buying the full system from Kuna for $130, and I couldn't be happier. I love their system and the alerts are super fast.

I hate to promote another company's products on Wyze's subreddit, but it really was the best solution for me. I have six other Wyze cameras that I love and promote to anyone who will listen; however, for my front door, the Kuna Toucan gets my recommendation.

SanDisk Ultra 32GB. If it works in your cam and records properly, you shouldn't have an issue.

I had an issue where various Transcend cards of mine wouldn't show up, would record a few minutes, etc.. This card worked fine in the cam, so I kept constant with the models as I scaled out.

Use Xiaomi Dafang Hacks as that repo is updated within the last 3 days, OpenIPC a few months, and that's what it was based on.

Format the card to FAT32. Make sure to do that. NTFS, etc. will not work.

Once formatted, clear the lot, and download the demo.bin.

Direct Download: https://github.com/EliasKotlyar/Xiaomi-Dafang-Hacks/raw/master/hacks/cfw/wyzecam_v2/cfw-1.1.bin

Rename that to 'demo.bin' and have NOTHING ELSE ON THE CARD. FAT32 + demo.bin by itself.

Insert card into camera with demo.bin. Hold setup before giving it USB power. Keep holding it. Plug it back in. Keep holding setup for 10 seconds after so it flashes.

After 2-3 minutes it'll reflash with an older stock firmware that will allow you to do step 2. Wait 3-5 minutes, and power down the camera.

Re-insert the card to the PC / Mac, and copy the full contents of firmware_mod to the SD card after editing /config/wpa_supplicant.conf.dist to include your SSID (wifi name) and PSK (password).

Make sure to rename it also to wpa_supplicant.conf.

After copying, make sure it's not within a folder on the SD card, but populates the root folder.

Re-insert the card, no need to press any buttons, turn on the CAM and you should find the camera on your network and can login to the interface as https://IP

Full Instructions

It's working great, pushing 430-450KB/s at 20-50% CPU and around 48MB used. Turned off audio and motion tracking to give the CPU a break.

Now I love this camera.

IR Blasters are directional Infrared Radiation (IR), a spectrum of light that's mostly invisible to human eyes but the Wyzecams can use to record its surrounding in the dark. In other words, video recordings in the dark, look like clear, bright, daytime, black and white scenes.

These light sources use electricity but it also has sensors that turn "on" the light when dark, and on average illuminates about 12 hours everyday depending on its installed geographic location. The longer its light is on the more money it takes operator - but it makes a huge difference for video recording when installed correctly.

With the Wyzecam and sensors triggering the Wyze smart outlets that now controls my IR blasters, it only turns on as needed, which reduces the energy cost, by my guesstimate of 99%, which translates ruffly into $18.92 savings per year for my current energy rates of 27¢ per kWh on Oahu.

I have been using this light fixture with no failures or operational issues.

My biggest lesson with IR blasters was that the light source cannot be too strong or the details get "washed-out" like a person's face. How the IR blaster is aimed takes trial and error to get it right for each installation but the results are worthwhile.

There's a better way: https://camelcamelcamel.com/Wyze-Indoor-Wireless-Detection-Assistant/product/B076H3SRXG?context=search

OP, this is probably the cheapest they will sell them for. If it's your first time I recommend jumping on the deal if you're planning to spend more than $25 for the free shipping. But if you're unsure then I'm sure it's possible we will see a $20 deal on Amazon again.

Also, if you live near a Micro Centre you can pick up their own branded SD cards super cheap. For example, a 128gb card costs $12.99. I use their 64gb card and have several months worth of clips stored on it.

First, describe your planned mounting location as it pertains to weather exposure.

Covered? Not covered? Temps?

There are "weatherproof" enclosures/housings out there but none of them are truly weatherproof since they require holes for cables, don't have sealant rings, etc.

I bought these for my setup and it seems to work fine so far. Full disclosure it has not yet rained and I installed them 2 days ago, and they are under an overhand alongside some floodlights. But the reviews on Amazon indicate they work well.

If your setup involves being quite a ways back from the nearest overhang, you may not even need an enclosure.

It does a pretty good job. Lights up my whole living room. If its not enough however you can help the cam by getting more IR LED lights like this one.

I'm having the same issues with my recently purchased pans. 3 cameras in various rooms throughout my house, the IR alone barely penetrates a few feet into the dark. In my kid's rooms they leave nightlights on, so it's not an issue. In our playroom though, I ended up putting my old FosCam on a shelf, and plugging it in just as a supplementary IR illuminator. It has far more IR lights and it lights up a large playroom like a christmas tree. I'm loving almost everything about the Wyze cams, but a little disappointed in the apparent weakness of the IR lights. I'd definitely suggest checking Amazon, they have some cheap IR illuminators that could help.

This one has decent reviews and is mentioned to work great with Wyze cams. https://www.amazon.com/dp/B075ZYG89D/ref=cm_sw_r_cp_apa_i_aG80CbEE00161

I know its the same cost of a camera essentially, but I got these for my indoor cameras. They work great and also work well with IFTTT.

https://www.amazon.com/gp/product/B0178IC734/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

not so much. Been using one of these Wyze Cam Pan Protective Case. I do have it outside but under a roof, so it isn't directly out where water can hit the top of it. There's quite a bit of rain around me and I think this thing has been doing well. Do note (if you care to wait) that according to the Wyze CEO (in a recent email) that they are planning on an outdoor model soon.

1. Yes .. these and I love them https://www.amazon.com/gp/product/B07G732B9J/ref=oh_aui_search_asin_title?ie=UTF8&psc=1
   
   
2. Nope! And this past summer I've been through 100°F days, full sun, 60MPH winds, sideways 3" rain storms ... and now this winter -20°F nights, snow, ice, rain .... rain that then flash freezes.
   
   
3. Each exterior camera is mounted to window trim. The included USB cables running through the window to an outlet nearby. The flat cable makes this practical because it doesn't interfere with the window weather stripping.
   
   
4. a) Mounted to first story window exterior trim, covered front porch b) mounted to second story window exterior trim looking down at driveway, enclosure fully exposed to elements c) mounted to second story window exterior trim looking down at pool, enclosure fully exposed to elements d) mounted to wall in garage
   
   
5. Patriot 32GB SD in each for all-time recording, sending clips to the cloud. Waiting to hear about RTSP to make a decision on the upcoming storage device. (really, really hoping for RTSP)

thanks ... I thought about that.
but the outlet is on the side and I don't have enough clearance. My light is one of those recessed lights. I need an extension because the wyzecam plug is pretty big.


also considered this but not sure if it'd fit
https://www.amazon.com/Olens-LampChamp-eReaders-Security-PACKAGING/dp/B076B8LJLT/

Don't know if OP used this, but it looks good. I ordered a pair as I have an old house as well.

https://www.amazon.com/gp/product/B07P9SDD9M/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Do you have a protective case similar to the one in the link below on it? I had the white one and it looked almost exactly like this at night. If not, possibly just a very near by source of reflection? This looks like IR back scatter and based on the case I used, they are pretty sensitive to it. I first painted the case flat black, which resolved the IR issue for me short term. I eventually replaced the case with black ones that do not have the flap on the sides, as that seems to be where the reflections was mostly coming from. If you do not have a case on it, look for anything that is close to either side of the camera that might be reflecting the IR light. If not, I suspect one of the IR LEDs is misaligned. Maybe a defective unit?

https://smile.amazon.com/gp/product/B07GCX831T/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Edit: to fix spelling and to say that I do NOT recommend the linked case, especially not the white one if you plan to use IR for night recording. Spray paint all flaked off in a couple of days.

I've been using a couple of these around the house for over a year. I'm happy with it and service was great when I had an issue ( my fault ) with one.

https://www.amazon.com/Tendelux-Illuminator-AI4-Infrared-Security/dp/B075ZYG89D/ref=sr_1_3?crid=3M3V81HYZIW5O&keywords=ir+illuminator&qid=1562946265&s=gateway&sprefix=ir+ilum%2Caps%2C231&sr=8-3

It's cheaper at Amazon, $42.

Wyze Cam V2 1080P Indoor Smart Home Camera with Wyze Sense Starter Kit
https://www.amazon.com/dp/B07R3H3N97/ref=cm_sw_r_sms_apa_i_uoYQDbDX7E5HB

I hope this isn't the announcement. I saw it in Home Depot weeks ago.

We're should be available on Amazon again now, /u/OSRgamerkid. We've included the link below but if you have any trouble viewing it or any more questions, please let us know. :)

Amazon Link:https://www.amazon.com/Wyze-Indoor-Wireless-Detection-Assistant/dp/B076H3SRXG/

I added a couple IR illuminators to handle the after dark lighting for my cameras and actually turned off the IR from the Wyze cams themselves. They aren't any good for outdoor illumination. Not knocking them for that, as I knew that when I purchased. But a couple ir lights like these Tendelux 80ft IR Illuminator https://www.amazon.com/dp/B075ZYG89D/ref=cm_sw_r_cp_apa_i_8QvYDb1AF74CG. Do a great job of lighting the areas my cameras cover. There are many cheap options, just recommending one Inknow that works. You don't have to mount it next to your camera, if that's inconvenient, just where you want the night vision to be lit up.

Just as an FYI I was able to order one of the V1 models from amazon canada, last month. it was ~$37 with taxes and shipping from this link

It's not active right now but hopefully they start selling again once V2 is out.

Using these in all 4 of my cams. Great quality for the $. Despite what others have said - do not opt for cheapest option. Flash memory (SD cards, SSD, etc...) have a finite number of read/writes. If your cameras are configured for “Continuous Recording” you’ll burn out the cheapest cards in a month+.

Samsung 128GB 100MB/s (U3) MicroSDXC Evo Select Memory Card with Adapter (MB-ME128GA/AM) https://www.amazon.com/dp/B06XWZWYVP/ref=cm_sw_r_cp_api_i_uSuBDb98PG207

EDIT: typo

Lots of cheap & easy options like u/Freedom95 referenced: https://www.amazon.com/slp/light-socket-to-plug-adapter/gmtayufhb75x6de

More expensive all-in-one option if you don't have room for your USB charger in the light fixture: https://www.amazon.com/dp/B01EPC102A

I’m in the UK, used Amazon.com and paid $37 or £30. Works perfectly.
https://www.amazon.com/gp/aw/d/B076H3SRXG?psc=1&ref=ppx_pop_mob_b_asin_title

Okay, thanks! I'm brainstorming how to do it for my own carport. I was actually thinking about using one of these on one of the floodlights and hooking it up there....

Nyce Power LampCharger Light Bulb Socket Adapter, Light Socket USB Charging Station, Desk Lamp Adapter with Dual USB Charger Ports - Lamp Socket USB Port Tablet and iPhone Charger Adapter | 60W Max https://smile.amazon.com/dp/B07P9SDHRY/ref=cm_sw_r_cp_apa_i_wqS3CbAYJRN12

This one is working really well for me.

UCTRONICS IEEE 802.3af Micro USB Active PoE Splitter Power Over Ethernet 48V to 5V 2.4A for Tablets, Dropcam or Raspberry Pi (48V to 5V 2.4A) https://www.amazon.com/dp/B01MDLUSE7/ref=cm_sw_r_cp_tai_zu0UAb40HEMQG

Hmm, maybe this flexible thing will work?

https://smile.amazon.com/dp/B06XCH5LYD/ref=sspa_dk_detail_0?th=1

It would have to be shining over the top of the camera perhaps. I'd prefer the sides, but this might work.

It says "Maximum Power: 2.5 watts", so 0.5A, should be ok from the camera....

1. Yes using an enclosure. See my set up here. Link go Amazon mounts I ordered. They are not water proof but help keep water off. I mounted under eaves to help.
   
   
2. No issue with elements. Has been -32F air temp and -55 WC and no issues.
   
   
3. Powering by using a light socket to plug adapter (last photo in link above).
   
   
4. Attaches under eaves. I have 2 cameras mounted outside one at each door.
   
   
5. Using Samsung Evo 32 GB SD card. 32 GB IS max it can take I believe.

Is there a huge difference if i buy a regular USB cable or a micro usb cable for daisy chaining? Am thinking of buying this cable.

https://www.amazon.ca/gp/product/B07GD8CWN4/ref=ox_sc_act_title_2?smid=APL7OPJT4PBTR&psc=1

Since i already have Camera 1 setup, am going to connect the bigger end of the above cable in camera#1 and give the smaller end as input power to camera #2. In this case i dont think i need any usb adapter as below right?

https://www.amazon.ca/gp/product/B015PG6VU6/ref=ox_sc_act_title_7?smid=ADQJP9NWIFYM2&psc=1

I have tested with 10 foot and 6 foot extender with success. I purchased these back in 2013. Nothing special about them though, at the time of purchase they were half the price they are listed at now. I also purchased a 25 foot cable that I use to run outside.

6 Foot Extender https://www.amazon.com/gp/product/B00182CIB8
10 Foot Extender https://www.amazon.com/gp/product/B000YQQ9HI
25 Foot Cable https://www.amazon.com/gp/product/B0763358FV

I added an external IR spotlight for my garage. Night image is much better!

https://www.amazon.com/gp/product/B07387VCF7/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

I use this outside at the far end of my garage with a smart bulb plugged into it so I dont have to flick the switch for light https://www.amazon.com/gp/product/B01EPC102A/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

​

https://www.amazon.com/SEEKONE-Protective-Waterproof-Protection-Adjustable/dp/B07TMZ8PJ6/ref=pd_ybh_a_6?_encoding=UTF8&psc=1&refRID=R3T1NEXYBTFQP9GGFW1W已经

• In the sale, but does not support night vision mode.
  
• It's good during the day, but it needs to work with the lights at night

If you have lights outside, you could use something like this:
https://www.amazon.com/USB-Light-Bulb-LampCharger-Rechargeable/dp/B076B8LJLT/ref=pd_sbs_107_2/141-1795587-3836632?_encoding=UTF8&pd_rd_i=B076B8LJLT&pd_rd_r=1c670983-2e40-11e9-b05b-55823f4364c8&pd_rd_w=baDuv&pd_rd_wg=7sb7M&pf_rd_p=588939de-d3f8-42f1-a3d8-d556eae5797d&pf_rd_r=GB7702PZWX2Q6SF33MGW&psc=1&refRID=GB7702PZWX2Q6SF33MGW

What is this splitter that you talk about. So I plug in the ethernet cable into the PoE switch. Then what do I need at the other end? So the power goes from the switch, though the cable into the camera.

Like this: https://www.amazon.com/UCTRONICS-802-3af-Splitter-Ethernet-Raspberry/dp/B01MDLUSE7/ref=sr_1_1_sspa?s=electronics&ie=UTF8&qid=1525311114&sr=1-1-spons&keywords=ethernet+poe+splitter+usb+micro&psc=1

For what it's worth, I bought this one (below), and it worked straight out of the box (it was already formatted).

https://www.amazon.com/SanDisk-microSDHC-Standard-Packaging-SDSQUNC-032G-GN6MA/dp/B010Q57T02/ref=sr_1_3?ie=UTF8&qid=1510782235&sr=8-3&keywords=sandisk+micro+sd+card+32gb&dpID=41f2SZSqv6L&preST=_SX300_QL70_&dpSrc=srch

Amazon: https://www.amazon.com/Wyze-Indoor-Wireless-Camera-Vision/dp/B076H3SRXG (25.99 shipped Prime).

Wyze: https://www.wyze.com/ ($25.00 shipped via slower boat).

Yes, Wyze is announcing something tomorrow (note countdown on site above< so HD is likely blowing out the old ones.

The above prices have been in place since forever. SDCards are cheap everywhere.

Not saying this is a bad price, just not exciting.

I do wish they would put the sensor kit up on amazon... they only have the V2+sensor kit combo as far as I can tell.

​

https://www.amazon.com/Wyze-Indoor-Wireless-Camera-Vision/dp/B07R3H3N97

Like would this one work? It talks about different angles and wave lengths.

Tendelux 80ft IR Illuminator | AI4 No Hot Spot Wide Angle Infrared Light for Security Camera (w/Power Adapter) https://www.amazon.com/dp/B075ZYG89D/ref=cm_sw_r_cp_api_i_w9CrDbJXQMDM0

https://www.amazon.com/gp/product/B0763358FV/ref=od_aui_detailpages00?ie=UTF8&psc=1
Scroll way down and and see "special promotions"

No data, and no PoE support from Wyze.

But you can use these to do your own PoE to them.
https://www.amazon.com/dp/B01MDLUSE7

I have used that one successfully in a location far too distant to use USB cables for power.

Maybe something like this

Nyce Power LampCharger Light Bulb Socket Adapter, Light Socket USB Charging Station, USB Charger Ports, Tablet and Phone Charger Adapter | 60W Max (Lamp Charger with 2 USB Ports) https://www.amazon.com/dp/B07P9SDHRY/ref=cm_sw_r_cp_api_i_P0nSDb34GP2TB

I have two pan and scan cameras outside.

1. I am using these enclosures: https://www.amazon.com/gp/product/B07GCX831T/ref=oh_aui_search_asin_title?ie=UTF8&psc=1
   
2. I have not lost one to the elements and we've experienced -30F wind chills, ice, and snow.
   
3. Via a long USB that is carefully hidden behind the gutters and landscaping.
   
4. One is mounted under the roof soffit above the garage and the other under the roof of my back deck.
   
5. I have 32GB microSD cards in the cameras.

I am using 128gb samsung sdcard formatted through the wyze app. Its been a month now and working fine so far. I am using motion recording. Time will tell how this non endurance card holds up for motion. Tbh I probably should of got a 64gb high endurance samsung card for the same price. I think the 128gb is overkill for motion.

https://www.amazon.com/gp/product/B06XWZWYVP/ref=ppx_yo_dt_b_asin_title_o04__o00_s00?ie=UTF8&psc=1

Sorry for the late reply. This is the exact one I bought in November:

https://smile.amazon.com/gp/aw/d/B0763358FV?psc=1&ref=ppx_pop_mob_b_asin_title

It is still working well today!

So in terms of an international distributor, they just allow Amazon to handle it?

Unfortunately, Amazon AU lets just say is fucked https://www.amazon.com.au/Wyze-Indoor-Wireless-Camera-Vision/dp/B076H3SRXG

Amazon US does ship to Australia, works out about $50 a unit though.

Will definitely look forward when you will be able to handle international orders or at least match your price on Amazon.

For just the camera, link here. For the Sense kit which comes with a camera, link here. Note you can select whatever package you want at either link.

Also, my Wyze cam came direct from Canada but the Wyze Sense kit came direct from Illinois (According to the tracking number) so it took an extra couple days.

1. https://www.amazon.com/Camera-Bracket-Weather-Security-Outdoor/dp/B07G732B9J
   
2. Nope
   
3. Powered directly by an outlet through walls like in this guide https://www.youtube.com/watch?v=uZFBecgvtQU - same mount I listed too
   
4. All placed under roof eaves, though I did seal them with silicone & put a mesh screen on the bottom hole (read reviews on product page for more info)
   
5. Samsung 32GB EVO MicroSD Card & it's set to continuously record & events to cloud. Been using them for 4-5 months & no issues. (Well, if I record from the timeline the audio is usually out of sync, but that's actually a firmware issue)

These are not security cams either.

They do say ...

>Wyze Cam v2 can automatically record a 10-15 second alert video when it detects motion or sound. Videos are securely uploaded to the Amazon AWS Cloud via end-to-end encryption and are accessible for 14 days – no subscription plan required.

Not sure how you missed that.

https://www.amazon.com/Wyze-Indoor-Wireless-Camera-Vision/dp/B076H3SRXG

If you're willing to buy another camera, tbh you can never have too many of them, you can buy a starter kit that comes with a motion sensor

https://www.amazon.ca/Wyze-1080P-Indoor-Camera-Starter/dp/B07R3H3N97

There is one where the LENS is covered. I have a few of these.

https://www.amazon.com/SEEKONE-Protective-Waterproof-Protection-Adjustable/dp/B07TMZ8PJ6/ref=sxts_sxwds-bia

But one of them on a roof in Manhattan, the USB connector still got wet and would not stay on I have soldered the 5V directly to fix.

Now, that one rocks back and forth a lot. I think the plastic where it pivots is wearing down from the wind/weather.

It appears to have returned, with Wyze/Amazon as the seller.
https://www.amazon.com/dp/B076H3SRXG/ref=cm_sw_r_cp_apa_i_cVksDbJP6TTDR

https://www.amazon.com/gp/product/B01EPC102A/ref=ppx_yo_dt_b_asin_title_o06__o00_s00?ie=UTF8&psc=1

Do you have a porch light? maybe consider this? https://www.amazon.com/Olens-LampChamp-eReaders-Security-Anything/dp/B01EPC102A/ref=sr_1_2_sspa?ie=UTF8&qid=1524174092&sr=8-2-spons&keywords=usb+light+socket&psc=1

Will this work? I’ve not tried it.
https://www.amazon.com/UCTRONICS-802-3af-Splitter-Ethernet-Raspberry/dp/B01MDLUSE7/ref=sr_1_3?ie=UTF8&qid=1539355869&sr=8-3&keywords=poe+to+usb&dpID=41yrqOTd9zL&preST=_SX300_QL70_&dpSrc=srch

I'm using the 128GB EVO cards.

​

https://www.amazon.com/gp/product/B06XWZWYVP/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

Here's what I ordered: https://www.amazon.com/gp/product/B0763358FV/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

And this is the right version?

https://www.amazon.com/dp/B076H3SRXG/

https://www.amazon.de/dp/B076H3SRXG/ref=mp_s_a_1_3?keywords=wyze+cam+v2&qid=1558026238&s=gateway&sprefix=wyze&sr=8-3

Wyze Cam Wall Mount Bracket, Wyze Camera Cover with Adjustable Wall Mount for Wyze Cam V2 V1 and Ismart Spot Camera Indoor Outdoor Use, (White 3 Pack) https://www.amazon.com/dp/B07G732B9J/ref=cm_sw_r_cp_apa_i_tKr2DbA1J4219

I use mine outside with this cover.

https://www.amazon.com/dp/B07G732B9J/ref=cm_sw_r_cp_api_i_BQtvDbFFT5ZJZ

https://www.amazon.com/Camera-Bracket-Weather-Security-Outdoor/dp/B07G732B9J/ref=sr_1_3?ie=UTF8&qid=1540912339&sr=8-3&keywords=wyze+cam+mount&dpID=31Dp-ciM4nL&preST=_SY300_QL70_&dpSrc=srch

​

There are many options, one being google

Northeast US

using these:

https://smile.amazon.com/gp/product/B07G732B9J/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

it went back to $47 already.... :(

https://www.amazon.com/gp/product/B07R3H3N97

I've just placed an order for the Spot on Amazon.com (us site) and its shipping today. For some weird reason despite the seller for the Pan being Wyze/Amazon it states it won't ship to the UK! I even tried to buy from alternative sources on Amazon instead of direct but sadly same result, just won't ship to the UK (maybe weight?).

​

I'll update here when the Spot arrives in a week.

​

Spot link that will deliver to the UK - https://www.amazon.com/Wyze-Indoor-Wireless-Camera-Vision/dp/B076H3SRXG?ref_=bl_dp_s_web_17863920011

​

Pan link that WON'T deliver to the UK - https://www.amazon.com/Wyze-1080p-Indoor-Camera-Vision/dp/B07DGR98VQ?ref_=bl_dp_s_web_17863920011