#1,784 in Industrial & Scientific
Use arrows to jump to the previous/next product

Reddit mentions of 2-56 x 1/8" Button Head Socket Cap Screws, Allen Socket Drive, Stainless Steel 18-8, Full Thread, Bright Finish, Machine Thread, Quantity 100 by Fastenere

Sentiment score: 1
Reddit mentions: 2

We found 2 Reddit mentions of 2-56 x 1/8" Button Head Socket Cap Screws, Allen Socket Drive, Stainless Steel 18-8, Full Thread, Bright Finish, Machine Thread, Quantity 100 by Fastenere. Here are the top ones.

2-56 x 1/8
Buying options
View on Amazon.com
or
Thread Diameter 0.086"Head Diameter 0.164"Head Height 0.046"Allen Hex Drive Size 0.05"18-8 Stainless Steel provides strength and offers good corrosion resistance in many environments.
Specs:
Height6 Inches
Length4 Inches
Number of items100
Width1 Inches

idea-bulb Interested in what Redditors like? Check out our Shuffle feature

Shuffle: random products popular on Reddit

Found 2 comments on 2-56 x 1/8" Button Head Socket Cap Screws, Allen Socket Drive, Stainless Steel 18-8, Full Thread, Bright Finish, Machine Thread, Quantity 100 by Fastenere:

u/GZ-Onan · 2 pointsr/HotWheels

Drill out original rivets, which I assume you did in order to take it apart. Drill pilot holes for tap, be careful not to go too far. Use tap tool to cut threads, make sure to use lube (wd40 works). If you’re unfamiliar with tapping maybe look up a vid on you tube.

Button head screws -
Tap and drill bit

u/SneakyPetesMyName · 1 pointr/HotWheels

First I center punch the rivets on the bottom with one of these-

Bastex Steel Automatic Center Punch For Stable Hole Drill Indentation. with Adjustable Tension, Push-to-strike Function. https://www.amazon.com/dp/B072HSWV3B/ref=cm_sw_r_cp_api_i_6smvCb6ZKRCC8

Then I will use a 1/4” drill bit to take the head of the rivets off so the body and base can be separated. Just be slow and careful at this point so you don’t damage the base. Sometimes you may need to use a smaller bit on this part so just check and see what works best for the application.

Then I drill down about 3/16” into the rivet with one of these drills and then tap the hole with the tap-


Du-Bro 360 2-56 Tap And Drill Set https://www.amazon.com/dp/B0006O4GYG/ref=cm_sw_r_cp_api_i_KrmvCbDECZ061


Then I install one of these to make sure it fits correctly and holds everything together properly after all the work is done. You could also do a 2-56x3/16” screw if you want one a little bit longer-


2-56 x 1/8" Button Head Socket Cap Screws, Allen Socket Drive, Stainless Steel 18-8, Full Thread, Bright Finish, Machine Thread, Quantity 100 By Fastenere https://www.amazon.com/dp/B00YSS9CYA/ref=cm_sw_r_cp_api_i_ormvCbP5S7Q34

I think that’s about it. Send me a DM if you have any other questions.