#160 in Battery chargers & accessories
Reddit mentions of 3vdc -12 volt Universal AC/DC Power Adapter USB Port | 8 Reversible Polarity Positive or Negative Tips Center Tip 3v 4.5v 5v 6v 7.5v 9v 12v 1a 12w Transformer 5.5mm 2.5mm 2.1mm 3.5mm 4.0mm 5.0mm 1.7mm
Sentiment score: 2
Reddit mentions: 5
We found 5 Reddit mentions of 3vdc -12 volt Universal AC/DC Power Adapter USB Port | 8 Reversible Polarity Positive or Negative Tips Center Tip 3v 4.5v 5v 6v 7.5v 9v 12v 1a 12w Transformer 5.5mm 2.5mm 2.1mm 3.5mm 4.0mm 5.0mm 1.7mm. Here are the top ones.
or
Multi-Voltage 12 Watt (12w/1-amp) replacement switching power adapter supply compatible with 1000s of small electronic devices using requiring 3 volt, 4.5 volt, 5 volt, 6 volt, 9 volt, or 12 volt up to 1.0a or 12 watts including many Electronics, Tablets, Routers, Smart Phones, Speakers, Monitors, TVs, LCDs, Cameras & Other USB Port Charging up to 12watt 1000ma with US 120 volt PlugIncludes 8 Interchangeable DC Tips/Plugs of the most popular sizes: 5.5mm x 2.5mm / 5.5mm x 2.1mm / 5.0mm x 2.1mm / 3.5mm x 1.35mm / 4.0mm x 1.7mm/ 2.5mm / 3.5mm / 2.5mm x 0.7mm. Please make sure your device is one of these size jacks on it for proper fit and the standard center positive polarity. New Upgraded model comes with a USB port built inNEW model now has REVERSIBLE DC Tip Polarization - Both Center/Inside/Middle Tip Positive (+) Outer/Outside Tip Negative (-) and Inside/Center Negative (-) Outer/Outside Positive (+) Can be Set by Removing Tip and Placing it in Opposite Position. This allows for maximum device compatibility as it can be set to operate in both center tip pos and center tip neg polarities. Please be sure to verify your device polarity, tip size and voltage before purchasing.Voltage is easy to change by the switch on the side of the adapter. Be sure you're using the correct VOLTAGE & POLARITY for your device before plugging it in. If you are not sure please use the "Customer Questions & Answers" section below before purchasing and provide your product brand, model, and part number if available and we will try to help verify your device's power requirements.UL Listed & ROHS Compliant | Input: 110v - 220v AC / Output: 3v - 12v DC - Maximum Current from DC tip is up to 2.5a or 30 watts (USB Port Limit is 1.0amps) - If your device requires less power, such as 200ma, 300ma, 400ma, 500ma, 600ma, 750ma or any other up to 2500ma through the DC barrel connectors it will work with this adapter with a matching tip and proper voltage/polarization
Specs:
| Color | Black |
| Height | 2 Inches |
| Length | 2 Inches |
| Number of items | 1 |
| Size | 12 Watts |
| Weight | 4 ounces |
| Width | 1 Inches |
Okay, I've got one for you, and I rarely see any DJ ever do this. You might consider getting a spare power supply (power cord / AC adapter) for your controller. AC to DJ power supplies do fail, and since it is not an easy to find item, if it goes out the day of your gig, you are screwed.
For my Denon MC7000, I can order the adapter online through Denon for $30. That way I am 100% positive that it will have the right voltage, amperage, tip size, etc. and is guaranteed to work.
Or you could just get off Amazon a universal one with switchable voltages and tips. The one I linked should have enough amperage to run a controller (the Denon takes 4000MA, and that one is up to 1 amp. Just be sure when you get it that the tip fits, and that you are using the correct voltage, tip polarity, etc. I can help you with this if you need - PM me.
Do you have a picture of the sticker on the bottom of the machine? Oftentimes they will say the power requirements.
If a normal headphone plug is too big for the charging jack, then it’s probably a 2.5 mm jack.
But the jack size isn’t the only thing you need to know. You also need the power requirements. If they are on the sticker on the bottom, we can find an appropriate charger. If not, here’s someone selling a somewhat expensive one.
Edit: I did a bit more research and found that the requirements are probably 7.5v and 900 mA. Here is a universal charger that has a 2.5mm jack and the option for 7.5v.
You may want to look a bit more yourself. Your requirements are:
-2.5mm phone/mono jack
-7.5v and at least 900mA (mA can be higher, 1000mA = 1 A)
-If you can’t find one with mA listed, make sure it is 7.5v and at least 8 watts.
I wasn’t able to find the polarity. So I don’t know if the tip or the sleeve should be positive or negative. That’s usually printed on the sticker requested as a little diagram. The tip is usually positive, and the sleeve is usually negative, but it would be impossible to know for sure without more info.
https://www.amazon.com/Universal-Reversible-Polarity-Positive-Transformer/dp/B01LBX8D58/ref=mp_s_a_1_1?ie=UTF8&qid=1541990166&sr=8-1-spons&pi=AC_SX236_SY340_QL65&keywords=9v+1a+center+positive&psc=1
This should do it for you. Set it to 9v and put the proper tip on it and you will be good to go.
Did you ever find one? They are seemingly impossible to find with the right size tip. I was thinking about ordering this one, but would rather have the correct OEM one. https://www.amazon.com/Universal-Transformer-Reversible-Positive-Negative/dp/B01LBX8D58
https://www.amazon.com/Universal-Reversible-Polarity-Positive-Transformer/dp/B01LBX8D58/ref=pd_lpo_sbs_23_t_2?_encoding=UTF8&psc=1&refRID=G5WPF3DEQD0KXGAXNTFH
Eh ya?
Edit: I noticed compared to your finger that adapter is huge. Is it old?