Reddit mentions of Cooler Master Accessory: Universal VGA Graphics Card Holder, Adjustable, Steel, Holds 2 VGA Card for Computer Cases

You're welcome.

Cooler Master Accessory: Universal VGA Graphics Card Holder, Adjustable, Steel, Holds 2 VGA Card for Computer Cases https://www.amazon.com/dp/B01IQCBKOI/ref=cm_sw_r_cp_apa_i_ST50Bb37KBP62

This should be exactly what you're looking for.

The bottom is magnetized as well, so it will stick to the case surface.

I took the boring approach and bought a GPU stand

https://www.amazon.com/Cooler-Master-MCA-0005-KUH00-Accessory-Adjustable/dp/B01IQCBKOI

Like everyone else said, don't store stuff in your case. If you really want to prop the GPU up to prevent sag then buy a GPU holder on Amazon, I even found you the link to one https://www.amazon.com/MasterAccessory-Universal-VGA-Holder-MCA-0005-KUH00/dp/B01IQCBKOI. MSI makes one as well

Can you get a GPU bracket? Avoid the one you screw at the back of the case but more like that one: https://www.amazon.com/Cooler-Master-Accessory-Universal-Adjustable/dp/B01IQCBKOI/ref=mp_s_a_1_4?keywords=gpu+support&qid=1563596307&s=gateway&sr=8-4

If its weight related it will help

https://www.amazon.com/gp/product/B01IQCBKOI/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

That's what I use. Very easy to adjust and install.

I didn't like the brackets I tried.

If your card is still working then I don't see a need to replace it.

Find something to hold it up. You could use lego, figures, whatever. People have gotten creative.

For me I bought this. Works well.

[15 bucks on Amazon (with prime, too!)] (https://www.amazon.com/MasterAccessory-Universal-VGA-Holder-MCA-0005-KUH00/dp/B01IQCBKOI/)

I believe is this one https://www.amazon.com/MasterAccessory-Universal-VGA-Holder-MCA-0005-KUH00/dp/B01IQCBKOI/ref=sr_1_1?ie=UTF8&qid=1485363713&sr=8-1&keywords=vga+holder

There are support brackets you can screw in to the expansion slots to reinforce the card, or standing support brackets that you can use. I'm on mobile so I'm not sure how you'll see the links as I do.

I did a ghetto fix too, using $5 fishing line but I'm not encouraging it.

Well it definitely helps with GPU sag, if that's what you're referring to. But some vertical GPU mount kits can still sag, just in a different way. I'm fairly certain this one will perform adequately though without sagging. Cooler Master also sells this if you're just trying to cure sag issues: https://www.amazon.com/gp/product/B01IQCBKOI/

I presume you're American, maybe try this

https://www.amazon.com/Cooler-Master-Accessory-Universal-Adjustable/dp/B01IQCBKOI/ref=mp_s_a_1_6?ie=UTF8&qid=1537919278&sr=8-6&pi=AC_SX236_SY340_FMwebp_QL65&keywords=gpu+bracket&dpPl=1&dpID=31LL1XVt5gL&ref

has anyone got the MasterAccessory Universal VGA Holder from amazon? (https://www.amazon.com/MasterAccessory-Universal-VGA-Holder-MCA-0005-KUH00/dp/B01IQCBKOI)

How is it?

Get one of these:

https://www.amazon.com/Cooler-Master-Accessory-Universal-Adjustable/dp/B01IQCBKOI

This is my personal favorite - -

https://www.amazon.com/MasterAccessory-Universal-VGA-Holder-MCA-0005-KUH00/dp/B01IQCBKOI

Coolermaster's "Universal VGA Holder"

Adjustable height, neutral color and appearance for any build, magnetic on the bottom ends of each of the three legs of base so it sticks to metal cases, and there are TWO adjustable lifters, so you can use one for a mascot - -

https://imgur.com/gallery/UItZM

MSI Armor, have the same card. Had to purchase this guy to stop the sagging

VGA Holder by cooler master. https://smile.amazon.com/gp/product/B01IQCBKOI/
The card seems to dip about 2mm and there are plays if I push by hand, so just in case I got this.

$20 gets you one of these

You can barely even see it

This is what i bought for my sag https://www.amazon.com/gp/product/B01IQCBKOI/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1

https://www.amazon.com/Cooler-Master-Accessory-Universal-Adjustable/dp/B01IQCBKOI

FYI I did some reading and these cards can sag quite a bit sometimes. I might be picking up one of these

https://www.amazon.ca/Cooler-Master-MasterAccessory-Universal-MCA-0005-KUH00/dp/B01IQCBKOI

It's CoolerMaster's VGA holder. Here's a link: https://www.amazon.com/dp/B01IQCBKOI/ref=cm_sw_r_cp_apa_i_l30XDb9B5XD0D

Have the same card. I got a GPU stand to prop it up. MasterAccessory Universal VGA Holder (MCA-0005-KUH00) https://www.amazon.com/dp/B01IQCBKOI/ref=cm_sw_r_cp_api_FHVTzb53NTDS1

I hope this works, but I bought a VGA holder from Cooler Master: https://www.amazon.com/MasterAccessory-Universal-VGA-Holder-MCA-0005-KUH00/dp/B01IQCBKOI

My Xtreme shows up next Monday, so I can't confirm whether or not the card holder actually works (can't see why it wouldn't). Reviews are positive, so seems solid.

If that card is heavy enough to warp itself like that, you should install the bracket (hopefully came with the card) if not you can find the one I use for my dual card setup (also works with single cards)

While hooks and dental floss may work temporarily the do not have the same support evenness(?) Means you are pulling up on the end and not supporting the whole card.

Good product -I use it - It looks neat -like a little tripod

https://www.amazon.com/MasterAccessory-Universal-VGA-Holder-MCA-0005-KUH00/dp/B01IQCBKOI/ref=sr_1_1?ie=UTF8&qid=1498916078&sr=8-1&keywords=COOLER+MASTER+UNIVERSAL+GRAPHICS+CARD+HOLDER+FOR+ALL+SIZE+TOWER+CHASSIS

Since your card isn't flat you can't get a brace, you'll need to get a GPU holder like this. That's if you don't feel confortable with the sag.

I had the the same issue with my 1070, I have the same case as well. I used a gpu brace from coolermaster, and it works really well. https://www.amazon.com/dp/B01IQCBKOI/ref=cm_sw_r_cp_apa_a9FNybJH77XKS

https://www.microcenter.com/product/605934/graphic-card-anti-sag-bracket

https://www.amazon.com/Cooler-Master-Accessory-Universal-Adjustable/dp/B01IQCBKOI/ref=sr_1_1?s=hpc&ie=UTF8&qid=1542753079&sr=1-1&keywords=Cooler+Master+Accessory%3A+Universal+VGA+Graphics+Card+Holder%2C+Adjustable%2C+Steel%2C+Holds+2+VGA+Card+for+Computer+Cases

I bought one of these holders, $14.99. Worth it.

Don't use the stupid brackets that screw into the slots, that thing can't hold any weight give me a break LOL Buy this bad boy instead

Cooler Master Accessory: Universal VGA Graphics Card Holder, Adjustable, Steel, Holds 2 VGA Card for Computer Cases
https://www.amazon.com/gp/product/B01IQCBKOI/

$10 https://www.amazon.com/gp/product/B01IQCBKOI

These cards are very heavy and I think whether they sag depends on how sturdy the back of your case is (whether the GPU screws in).

2080 Ti vary in weight and size considerably so that is a broad category. For $10 I would use one.

EDIT: sorry it's $20

https://www.amazon.com/Cooler-Master-Accessory-Universal-Adjustable/dp/B01IQCBKOI/ref=sr_1_4?crid=2H00ZISVD2WPP&keywords=uphere+gpu+brace&qid=1555527798&s=gateway&sprefix=uphere+%2Caps%2C208&sr=8-4

​

This is a simple, tasteful solution. A tad expensive for what it is, but it works well.

As others already answered, the clip doesn't really matter.

If you're concerned about gpu sag, you can get a support bracket for like $10. Or make one out of Legos or a figurine or something.

This is what I have, price fluctuates from $10-16 or so. There are plenty others.
https://www.amazon.com/dp/B01IQCBKOI/

You can look into getting either this or this.

Look up cooler master universal VGA holder, I use it in my pc to stop you sag and it works great

https://www.amazon.com/Cooler-Master-Accessory-Universal-Adjustable/dp/B01IQCBKOI

Yeah that's a fear of mine, I have something to hold mine up. Eventually I'll get around to buying an actual brace like this one. I know that defeats the purpose of your post by spending more money though.

I haven't had much experience with cards of this size. It's definitely the largest heatsink I've owned as well. I mean, it's got GIRTH. I didn't notice sag, per say, but the way I run my 8 pin connectors from the back of my case it pulls a little downward and the card was more than happy to oblige. I haven't done anything about it yet, but more than likely I will. I can link you to some options I was looking at:

I was originally looking at one of these 2:
https://www.amazon.com/Graphics-Support-Holder-custom-Gaming/dp/B01DQK7DDW/ref=sr_1_25?ie=UTF8&qid=1492116171&sr=8-25-spons&keywords=gpu+brace&psc=1

But I read there that this brace can interfere with your fans depending on how wide the card is. This card is a wide card, and I have 2 120mm side fans that this would disrupt airflow from

https://www.amazon.com/Emperors-Magic-Universal-Acrylic-Graphics/dp/B01MZXCFDL/ref=sr_1_9?ie=UTF8&qid=1492116171&sr=8-9&keywords=gpu+brace

So I'm most likely going to go with this:
https://www.amazon.com/MasterAccessory-Universal-VGA-Holder-MCA-0005-KUH00/dp/B01IQCBKOI/ref=sr_1_2?s=electronics&ie=UTF8&qid=1492116376&sr=1-2&keywords=gpu+brace

Doesn't look too bad, but if you're not feeling comfortable you can take a look at some of the GPU holders available.

https://www.amazon.com/Graphics-Support-Holder-custom-Gaming/dp/B01DQK7DDW

AND

https://www.amazon.com/MasterAccessory-Universal-VGA-Holder-MCA-0005-KUH00/dp/B01IQCBKOI/ref=sr_1_2?s=electronics&ie=UTF8&qid=1492837633&sr=1-2&keywords=gpu+holder

edit: spelling, added alternative for those with 2.5" slot cards

you're welcome :)

although i have heard that some cards with slim shrouds might not be able to use this bracket without some jerry rigging to make sure the bumps that support the gpu don't hit the fan blades, as is the case with all brackets of this type.

if this is the case then something like this might be a better fit.

These already exist, and there are many

V1 Tech

CloverTale

Atlas

Cooler Master

yeah it should work ,, since you got a radiator you will have to put it on the white bar, i think on mine on the bottom of the stand theres a screw if you loosen you can move it around to fit on the white bit, something like this would work better for you

https://www.amazon.com/upHere-Graphics-Anodized-Aerospace-Aluminum/dp/B079HSVSLR/ref=sr_1_3?ie=UTF8&qid=1543317400&sr=8-3&keywords=gpu+support

this one is what i used

https://www.amazon.com/Cooler-Master-Accessory-Universal-Adjustable/dp/B01IQCBKOI/ref=sr_1_5?ie=UTF8&qid=1543317242&sr=8-5&keywords=gpu+support

they are not that long, its two bars screwed togsther for 2 card support, you can use just one bar and it should be algs

EDIT: just realized you dont have a front mounted radiator in which case either one will work

Look at this

​

If you're willing to spend ~$14, this is a pretty solid solution. I own it and am happy with it.

I bought this recently, highly recommended for GPU sag. Very solid, everything's metal, and the feet are magnets

https://www.amazon.com/MasterAccessory-Universal-VGA-Holder-MCA-0005-KUH00/dp/B01IQCBKOI/ref=sr_1_1?s=pc&ie=UTF8&qid=1487954982&sr=1-1&keywords=graphics+card+holder

If you want a cheap option and have a taller case I use this coolermaster gpu bracket. It doesn't get in the way of using other pcie lanes, has magnetic feet and blends into the black of my case well.

https://www.amazon.com/Cooler-Master-Accessory-Universal-Adjustable/dp/B01IQCBKOI

Even with the much thinner heatsink on my 1080 Strix card, it was sagging after a few months. It happens little by little so you won't notice it at first, and the PCB and backplate can get a slight bend over time from the weight.


You can get a cheap GPU brace on Amazon for like $10-20. There's 2 styles, one is a more discreet bracket arm and the other is a sturdier kickstand kinda thing. I went for the discreet one personally because I didn't want it to show much. There's different brands with different looks btw, those are just an example of each style. Also some people get creative and use Lego figures and stuff as a stand.

Oof that's really expensive. Do you know about this brace?

https://www.amazon.com/Cooler-Master-Accessory-Universal-Adjustable/dp/B01IQCBKOI/ref=pd_sim_147_3?_encoding=UTF8&psc=1&refRID=DSNWSH9GZGZRBY9770B1

I think these are adjustable?

There are two types of GPU sag. One is caused by poor support on the supports the GPU uses and the other is flex on the PCB from the weight. This looks like the bend is acutally the card itself.

Something like this would fix it

https://www.amazon.com/Cooler-Master-Accessory-Universal-Adjustable/dp/B01IQCBKOI/ref=sr_1_9?ie=UTF8&qid=1519236098&sr=8-9&keywords=gpu+brace

When you get an expensive video card, cant you spare 20 bucks to get a gpu holder?

That Wall-E is 160$ i see.

Posts like this are getting annoying.

New karma farming: put whatever toy inside your case touching your GPU, post it.