#296 in Tools & Home Improvement

Reddit mentions of Genesis GHG1500A 12.5 Amp Dual-Temperature Heat Gun Kit with High and Low Settings, Air Reduction Nozzle, Reflector Nozzle, and Two Deflector Nozzles

Sentiment score: 10
Reddit mentions: 20

We found 20 Reddit mentions of Genesis GHG1500A 12.5 Amp Dual-Temperature Heat Gun Kit with High and Low Settings, Air Reduction Nozzle, Reflector Nozzle, and Two Deflector Nozzles. Here are the top ones.

Genesis GHG1500A 12.5 Amp Dual-Temperature Heat Gun Kit with High and Low Settings, Air Reduction Nozzle, Reflector Nozzle, and Two Deflector Nozzles
Buying options
View on Amazon.com
or
    Features:
  • Powerful 12.5 amp motor 1500/750 watt
  • High and low temperature settings for versatility
  • Deflector nozzles protect glass and other surfaces while Reflector nozzle speeds Thawing of pipes. 3 Position rocker type switch for high temperature, off and low temperature
  • Includes: Two deflector nozzles, One reflector nozzle, and an air reduction nozzle
  • CALIFORNIA PROPOSITION 65 WARNING: Cancer and Reproduction Harm
Specs:
ColorGrey/Green
Height2.75 Inches
Length8.75 Inches
Number of items1
Size2 Units (GHG1500A)
Weight2 Pounds
Width8.5 Inches

idea-bulb Interested in what Redditors like? Check out our Shuffle feature

Shuffle: random products popular on Reddit

Found 20 comments on Genesis GHG1500A 12.5 Amp Dual-Temperature Heat Gun Kit with High and Low Settings, Air Reduction Nozzle, Reflector Nozzle, and Two Deflector Nozzles:

u/OmniaMors · 145 pointsr/photography

What a beautiful shot! Sometimes sacrifices must be made haha.

If you dont mind me making a small suggestion, I would try using an abrasion resistant polycarbonate infront of your lens because its the least likely to scratch or pit from debris. You can get just basic polycarb for like $5 so you could also just buy 10 and use them as disposable parts. It would save you a lot of money in the long run, and polycarb is the least likely to warp your image and if you get the thin stuff (under 0.5") it will have minimal effect on your light.

As for dew, you really just need to make sure youre above the dew point. If you have a power source, I would just buy a heat gun and point it at the edge of the poly carbonate, about a foot away. This way air is traveling along the surface of the polycarb and the lens. This would whisk away anything on them, heat them above the dew point preventing any of it, and wouldnt blow any dust in the way.

Anyway, great to read these detailed accounts from first hand photographers. Than you so much for sharing!

u/Rygel17 · 5 pointsr/Survival

Genesis GHG1500A Dual Temperature Heat Gun Kit with Four Metal Nozzle Attachments https://www.amazon.com/dp/B00EU2T8GG/ref=cm_sw_r_cp_api_i_KJ6XCb0YS1FW2

This is the one I got, for less than $20. Great buy.

u/MyCousinTroy · 3 pointsr/sousvide

You wanna sear your steaks with a heat gun? I've melted butter and the like with one, I've even heated up food out of the fridge with one, so it should work. This is the one I used, on the highest setting. When I read the output temp with a thermometer it showed about 550 degrees F. https://www.amazon.com/gp/product/B00EU2T8GG/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

u/ardentTech · 2 pointsr/Leathercraft

Good question, and it pains me a bit that I have a small box of unused tools that were purchased when I began. I'm sure I missed a few things, but here you go:

u/ZachMatthews · 2 pointsr/flyfishing

Easy fix. Anyone saying to cut the loop off has never actually strength tested these loops.

Watch the end of this video.

To fix your loop instead of cutting it off, buy polyolefin tubing. 3-5mm should be about right.

Next, buy a heat gun.

Cut a short length of tubing, slide it over the end of your line, and waft the heat gun so the tubing shrinks and the line inside it liquefies but does not burn. Let it cool, then peel the heat shrink back off (use a pair of tying scissors to snip it and get it started so you can peel it).

It'll be good as new. You can also cut that one off and make another if you want a new loop. Fly lines have about 2 feet of level tip material to allow for this kind of cutting.

No knot is as strong as a welded loop. Welded loops were about 3X stronger on average than every knot I tested, sometimes more. Here is my original thread on the tests I did.

Here are the results of my strength tests for the Fly Rod & Reel article:

Knot Break Strength - Tested to failure with Boga Grip using 20 lbs. monofilament

|Knot | Test 1 | Test 2|
|---------|----------|----------|
|Nail Knot (5 Turns) | 10 lbs. | 10 lbs.|
|Albright Knot (5 Turns) | 12 lbs. | 12 lbs.|
|Doubled-Line Nail Knot| (6 Turns) 8 lbs. | 10 lbs.|
|Double Surgeon’s Knot | (20 lb. to 20 lb.) 14 lbs. | 18 lbs.|
|Castwell Knot | 13 lbs. | 12 lbs.|
|Welded Loop | 20 lbs. X 3 attempts (see video)|

u/MyMostGuardedSecret · 2 pointsr/3Dprinting

I highly recommend spending a bit of money to get an actual heat gun, as opposed to a hairdryer. They're not that expensive (here's the one I have for $19), and they blow MUCH hotter than hair dryers. The advantage is that you can just sweep them across the model and the strings will basically vanish before your eyes. With a hairdryer you usually have to hold it in place for a second which can result in the warping

u/sambo2366 · 2 pointsr/SCREENPRINTING

Genesis GHG1500A Dual Temperature Heat Gun Kit with Four Metal Nozzle Attachments https://www.amazon.com/dp/B00EU2T8GG/ref=cm_sw_r_cp_api_SerOBbD9N3VW3

Heat guns are cheap.

I think they might even be cheaper at Home Depot.

u/priestwithknives · 2 pointsr/CR10

Edited a profile to get your settings about right, should help.

https://files.fm/u/bbeq5kqk

Also heat guns eat up strings, just use quick passes once the gun is up to temp, if you linger on a miniature for more than 2 seconds you'll probably start to get deformations.

https://www.amazon.com/Genesis-GHG1500A-Temperature-Nozzle-Attachments/dp/B00EU2T8GG/ref=sr_1_1?s=hi&ie=UTF8&qid=1524940417&sr=1-1&keywords=heat+gun&dpID=41o%252BjfZKenL&preST=_SX300_QL70_&dpSrc=srch

u/MarcusDohrelius · 2 pointsr/gundeals

For anyone reading this, a standard heat gun has a lot of uses, but is the great for efficiently cleaning the stock of cosmoline.

u/Sztheday · 1 pointr/candlemaking

This is the one I have. Have used it several times to fix tops and wet spots and it works great! https://www.amazon.com/gp/product/B00EU2T8GG/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1

u/wildjokers · 1 pointr/3Dprinting

By esteps I mean extruder steps. The number of steps the stepper motor has to turn to push out 1 mm of filament. Generally you can calibrate this by telling it to extrude 100 mm of filament and measuring how much it actually extruded. I don't know specifics of your printer but you should be able to find information about your specific printer indicating if that is something most people do. Here is the procedure for a different printer, it will give you some idea what to look for for yours: https://3dprinterwiki.info/extruder-steps/

To clear out a potential clog take off your nozzle and hold it in front of a heat gun on high with pliers. The filament will pretty much evaporate away. Can use tiny nozzle cleaning drill bits, you can get on amazon or aliexpress, to clean out any that doesn't evaporate.

If you don't have a heat gun you can get them for $10-$20 at Harbor Freight or Amazon. This is the one I bought and it works well (looks like it has went up in price since I bought it though):

https://www.amazon.com/gp/product/B00EU2T8GG/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

> its thicker than I remember

How old is the nozzle? Maybe it is worn and the hole is now bigger than 0.4mm? (brass nozzles are consumables if that is what you are using)

u/jaksblaks · 1 pointr/roasting

Yes heat guns arent designed for the high heat of roasting. I found this one to be pretty good. The plastic sheath falls off though. I keep a spare and alternate them when back to back roasting. I do a lb at a time in a breach machine. Takes 12-15min or so depending on beans.
https://www.amazon.com/gp/aw/d/B00EU2T8GG

u/reddiculousity · 1 pointr/biggreenegg

Also, If anyone still doesn’t wanna spend that much buy a [heatgun](Genesis GHG1500A Dual Temperature Heat Gun Kit with Four Metal Nozzle Attachments https://www.amazon.com/dp/B00EU2T8GG/ref=cm_sw_r_cp_api_i_rLIbBbSZYN31R

u/rr_power_granger · 1 pointr/roasting

Hi all, my goal is to construct a fluid bed roaster capable of roasting a half-pound of coffee per go.

For the motor, I'm looking at this electric leaf blower, and for the heating element, I'm looking to dissect this heat gun.

I'll use a pyrex baking tube, and a cocktail shaker to cap it off at the base. And then some machining magic to couple it to the mounting pipe.

Does it seem like this will get hot enough to roast a 1/2 pound?

I'm trying to upgrade from my current popper setup which can roast a max of 60 grams at a time (and that's with me constantly agitating with a shish kabob stick).

Edit: One possible improvement could be increasing the wattage of the heater to 2000W. Does anyone have a recommendation for a really cheap blower (or just the element itself)? Or would this water heater element work?

If I reclaim the air from the exhaust back into the pump, would this allow a 1500W heater to work?

u/the_river_nihil · 1 pointr/AskElectronics

You use, like, a big heat gun on the whole board all at once?

What's the failure rate of the scrap parts? I'd think the heating process would have to be more delicate than that, but maybe not.

u/illwatchyousleep · 1 pointr/rosin

Hand vise: IRWINQUICK-GRIPOne-Handed Bar Clamp, Heavy-Duty, 6", 1964711 https://www.amazon.com/dp/B001VND4X0/ref=cm_sw_r_cp_apap_SKWbD2mBTHRZ9

Steel plates: Round Hot Rolled Steel Plate 1/4" x 4" Diameter Circle (Pack of 2!) https://www.amazon.com/dp/B00YWBU1P2/ref=cm_sw_r_cp_apa_Mdufzb3Q4YDXK

Epoxy: J-B Weld 8297 HighHeat 550 Degree Epoxy Putty Stick - 2 oz. https://www.amazon.com/dp/B007PP26RI/ref=cm_sw_r_cp_apa_ieufzbQD017AS

And turns out my stove is way easier to heat up the steel plates. But if you're interested in a heat gun I bought this one: Genesis GHG1500A Dual Temperature Heat Gun Kit, Grey https://www.amazon.com/dp/B00EU2T8GG/ref=cm_sw_r_cp_apa_pfufzbAPGCZ11


Sorry about the formatting, I'm on mobile

u/Praise_the_boognish · 1 pointr/watercooling

The following are the parts I'll be purchasing for this build. I think I've covered everything, but as this will be my first custom loop if someone could give it the once over and make sure I'm not forgetting something it would be GREATLY appreciated!

Link to current build

Item | Vendor | Price | Quantity |
---|---|----|----|----
[CE 280](https://www.ekwb.com/shop/ek-coolstream-ce-280-dual","EK-CoolStream CE 280) | EK | 75.99 | 1 |
[PE 360](https://www.ekwb.com/shop/ek-coolstream-pe-360-triple#ow_alert_box","EK-CoolStream PE 360) | EK | 79.99 | 1 | 1
Corsair SP 120 2-pack | Amazon | 27.99 | x2 |
EK 140 Revo D5 | EK | 163.99 | 1 | text
EK Supremacy EVO | EX | 78 | 1 | text
EK Pump Bracket | EX | 13.49 | 1 | text
MSI GTX 1080 Sea Hawk EK| Newegg | 569.99 | 1 | text
ATX Bridging Plug | EX | 2.49 | 1 | text
Alphacool Silicon Bending Cord | Amazon | 8.49 | 1 | text
EK-CSQ Plug | EK | 3.49 | x2 | text
EK-AF 6mm M-M Extender | EK | 2.99 | x2 |
EK Ball Valve | EK | 19.99 | 1 | text
EK X Splitter | EK | 8.99 | 1 | text
Heat Gun | Amazon | 17.71 | 1 |
Step Bit | Amazon | 10.85 |1| text
Pipe Cutter | Amazon | 7.99 | 1 | text
EK-HDC 16mm Gold Fitting | EK | 8.99 | x10 |
EK PETG 12/16 Tube | EK | 8.49 | x4 |