Best novelty lighting according to Reddit
Reddit mentions of LEDMO 5630 LED Strip, Daylight 300pcs SMD 5630LEDs 16.4Ft DC12V Waterproof IP65, 25Lm/LED, 2 Times Brightness Than SMD5050 LED Ribbon, LED Light Strip
Sentiment score: 7
Reddit mentions: 15
We found 15 Reddit mentions of LEDMO 5630 LED Strip, Daylight 300pcs SMD 5630LEDs 16.4Ft DC12V Waterproof IP65, 25Lm/LED, 2 Times Brightness Than SMD5050 LED Ribbon, LED Light Strip. Here are the top ones.
- Christmas Decorations 3 MODES!!! steady-on, flashing, and gradient change(BUT YOU NEED A Remote Control FOR ASIN: B014EZ4M0K) need to order separately.
- Need to feed by a 12V/5A (60Watt) Power adapter( ASIN: B01461MOGQ )need to order separately.
- DIY FOR YOURSELF!!Cuttable Every 3 LEDs along the cutting marks, reconnect with connector ASIN:B0739MH4CD, all kinds of effect you want, “T””L”"+"connector and strip light mounting Brackets with screws
- High Quality 5630 SMD Top LED, 300 LEDs (60Led/M), Daylight White 6000-6500K, 23-25LM/LED, 2 times brightness than SMD5050 LEDs
- Save your bill Long life span more than 50,000 hours(more than 25year, average 5 hours /day).
Features:
Specs:
Color | Daylight White,waterproof Ip65 |
Size | waterproof 5630 led strip |
▼ More
#17 of 944
Combination of parts from Amazon and ebay. Not all of them are necessary, fittings and Brute trashcans and such are from Home Depot.
Runs the lights, pump, fans, and other electronics. Kind of excessive. 5A would be enough.
https://www.amazon.com/gp/product/B01E6S0JS4
Don't cheap out on these. Crappy plastic check valves really screwed me early on.
https://www.amazon.com/gp/product/B01KZOCQMA
Needed for priming the pump or flushing the nutrient reservoir.
https://www.amazon.com/gp/product/B018HMFG7O
This was roughly 4x what I actually needed.
https://www.amazon.com/gp/product/B00B8PAAJW
Transplanting the sprouts into this was weird, but they took well to it.
https://www.amazon.com/gp/product/B004IAM29K
Everything I chose was 5/16 inner diameter.
https://www.amazon.com/gp/product/B01CGVJ9QG
Hydroponic pots, specifically for Leca substrate.
https://www.amazon.com/gp/product/B00N9AE9BE
I think that dripping from two feet aerates the water naturally, but this can't hurt.
https://www.amazon.com/gp/product/B00L17IPEO
https://www.amazon.com/gp/product/B01339F5ZO
https://www.amazon.com/gp/product/B01339G2F6
Wait for sales on these! The 270W light is $80 now, but I got it for $60.
https://www.amazon.com/gp/product/B00RWQ4B50
To make the door airtight.
https://www.amazon.com/gp/product/B011CXIPO6
This will be enough for a bunch of grows. A little goes a long way.
https://www.amazon.com/gp/product/B017H73708
Will also last a long time. Only takes a few drops to balance a gallon.
https://www.amazon.com/gp/product/B000BNKWZY
This thing was bigger than I anticipated.
https://www.amazon.com/dp/B00E582DV2/
For making the irrigation loops.
http://www.ebay.com/itm/302176243137
Loud as heck. Ended up using a quieter fan I had around.
http://www.ebay.com/itm/272508816366
Quiet as heck. Rated for 2.1GPM. It's enough, but I think that a 5GPM pump would have been better.
http://www.ebay.com/itm/272403296601
I’m using 2 of these LEDMO 5630 LED Strip, Daylight... https://www.amazon.com/dp/B01339G2F6?ref=ppx_pop_mob_ap_share
I am using these https://www.amazon.com/gp/aw/d/B01339G2F6?psc=1&ref=ppx_pop_mob_b_asin_title you will need a driver (power brick) for them. I got the one listed by them for 5A.
Good info! Do you think this is comparable to what you've got?
5630 LED Tape on Amazon
So, everyone thinks the color "grow" lights are just gimmick and won't produce better results than these pure "daylight" LEDs? Just a final confirmation before I order.
Thank you again for your feedback!!
This is the one that I got. They are 5630s: https://smile.amazon.com/gp/product/B01339G2F6/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
Here's what my spacer looks like. Ignore the sick plant. She's doing better. :)
But I think it would be fine if to even make a spacer with the LED strips just don't make them as dense as I did. I just got lazy and didn't want to cut the strip.
I had a look on Amazon.com and the "Amazon choice" one at $49.99 would be sufficient for 1 plant in enclosed conditions like a spacebucket.
https://www.amazon.com/Rolledro-Lights-Indoor-Spectrum-Hydroponics/dp/B00RWYCRB2
Then you will want to get a 5630 led strip for side lighting. Like this:
https://www.amazon.com/LEDMO-Flexible-Daylight-Waterproof-brightness/dp/B01339G2F6
Although I wouud recommend searching on Amazon for "5630 led strip" and looking for one that is both waterproof, adhesive backed and has a usb connector for easy installation. The one I linked is just the LED strip on its own.
They are incredibly bright and very helpful! Here.
this is the light i use it has smaller versions if u need it.
waterproof led pight
The application is for lighting an archery target with LED strips each night for ~3-4 hours a night to allow the range to stay open. This is in central california so there is plenty of sun during the day and nights aren't excessively long. I feel like the sealed lead acid battery will cause problems due to the low number (200-300) charge cycles they can go through. What do you mean by saying the 12v battery is not 12v? I feel like I won't need a 30W solar panel but I'm not sure. I will most likely use a store bought charge controller like mrCloggy suggested, but I'm wondering if I can wire that up to the lipo battery. I would like to use these http://www.amazon.com/LEDMO-Flexible-Daylight-Waterproof-brightness/dp/B01339G2F6/ref=sr_1_1?ie=UTF8&qid=1454112286&sr=8-1&keywords=5630+Flexible+Led+Strip if possible which seem to be a 72W led strip, but I will use lower power http://www.amazon.com/Triangle-Bulbs-T93007-Waterproof-Flexible/dp/B005EHHLD8/ref=sr_1_1?ie=UTF8&qid=1454112451&sr=8-1&keywords=waterproof+led+strip if needed. Any suggestions?
I'm using that roledro light now in my bucket for my first grow, works great. I am using these led light strips LEDMO 5630 LED Strip, Daylight 300pcs SMD 5630LEDs 16.4Ft DC12V Waterproof IP65, 25Lm/LED, 2 times brightness than SMD5050 LED Ribbon, LED Light Strip https://www.amazon.com/dp/B01339G2F6/ref=cm_sw_r_cp_apa_i_ZCkMDb4E4WEW5. You need to get the power supply which is sold separately. Good luck!
Somethin' like this?
https://www.amazon.com/LEDMO-Flexible-Daylight-Waterproof-brightness/dp/B01339G2F6/ref=sr_1_1?ie=UTF8&qid=1486245183&sr=8-1&keywords=led+6500+k+strip
Almost any bulb should work ok as long as it is near the 6500k range like you've read about already.
I've used various brands of both CFL and LED lights successfully.
I eventually started using strip lights with a 12vdc power source attached the bottom side of my fruiting chamber lid.
I would instead get a roll of the newer/larger SMD6530 LED's (25 lumens per LED) ($10.99), plus power($5-10) and a simple on/off switch ($4-5).
Brighter, cheaper, and you have the remaining 14-15 FEET of LED's for under shelf lighting or other projects around the house/garage!
Great also for gun safes, garages, etc. You can put a rotary dimmer, or IR motion detector on them as well!
GL!
These lights and unfortunately atm i cannot get an approximate distance but i can recall the tops of the plants are maybe 3 spacers away from the light ? ik they are starting to get close and i planned on making more spacers next weekend. other than the main i’ve got this strip along the halfway height of the plants.
Does this look like about the same thing?
http://www.amazon.com/LEDMO-Flexible-Daylight-Waterproof-brightness/dp/B01339G2F6/ref=sr_1_6?ie=UTF8&qid=1463586800&sr=8-6&keywords=flexible+led+strip