Best car polishes & waxes according to Reddit
Reddit mentions of Meguiar's Clear Coat Safe Polishing Compound 16 oz.
Sentiment score: 6
Reddit mentions: 8
We found 8 Reddit mentions of Meguiar's Clear Coat Safe Polishing Compound 16 oz.. Here are the top ones.
- SWIRL AND SCRATCH REMOVER: Safely and quickly removes light swirls and scratches, hazing, and other light below-surface defects
- POLISHING COMPOUND: Polishing oils restore brilliance and a rich, glossy shine to dull paint finishes
- CLEAN BEFORE WAX: Produces a clean surface while boosting gloss and shine before applying wax
- CLEAR COAT SAFE: Safe and effective on all glossy paints and clear coats (not for use on flat, matte or satin finishes)
- NO MACHINE NEEDED: Formulated to be applied by hand only
Features:
Specs:
| Color | Factory |
| Height | 0.95 Inches |
| Length | 8.3 Inches |
| Number of items | 1 |
| Release date | November 2011 |
| Size | 16 oz |
| Weight | 1.19 Pounds |
| Width | 2.6 Inches |
▼ More
#14 of 238
https://www.amazon.com/Viking-Car-Care-Microfiber-Applicator/dp/B0051MYL8E/
https://www.amazon.com/Meguiars-G18016-Clear-Rubbing-Compound/dp/B006FUT13G/
https://www.amazon.com/Meguiars-Clear-Coat-Polishing-Compound/dp/B006FUT154/
​
Wash/Wipe the area with damp cloth to remove dirt
Don't use too much product.
Too much will make it to slippery.
Err on the side of caution if it's still got scratches repeat the whole process again
$20 and 20 mins. will make a big difference.
​
​
Post a before
and after picture
Go to the autoparts store and buy this stuff called buffing compound. It will be in he section where they sell the car wax. Use it and it will get rid of that film.
Here it is on Amazon:
Meguiar's G18116 Clear Coat Safe Polishing Compound - 16 oz. https://www.amazon.com/dp/B006FUT154/ref=cm_sw_r_cp_api_ze3hzbJHNS5B3
This won't make it look perfect, but it will improve it a LOT.
First you need to gently clean it up best you can. I would use this stuff, but any polishing compound or liquid rubbing compound should work. Don't rub hard with this stuff, just light pressure your only trying to clean it up and give yourself a good surface for the touch up paint.
https://www.amazon.com/Meguiars-G18116-Clear-Polishing-Compound/dp/B006FUT154/
Next get some touch up paint for you car, you can get your cars paint code from any Subaru dealer if you give them your VIN number. You can get the touch up paint from either a Subaru dealer, online, or someplace like Auto Zone.
When touching up the paint less is more, so try to use very little paint and multiple coats.
After the touch up paint has dried then use something like this and just keep polishing it and slowly it will begin to blend in better and better.
https://www.amazon.com/Meguiars-Mirror-Glaze-Finishing-Polish/dp/B003LMJP4Q/
Again this isn't the best fix possible but is probably the most affordable fix for the quality you'll end up with if you do everything correctly.
You want to use a cutting compound, then a polisher, then a wax and polisher mix, then a wax. It can be done by hand but it'll be tedious work, a polisher is recommended. you can get a 6 inch polisher on Amazon for cheap
[Cutting compound] (https://www.amazon.com/Meguiars-Mirror-Glaze-Ultra-Cut-Compound/dp/B001O7PNW8/ref=sr_1_3?crid=2X258V2JG0MWL&keywords=cutting+compound&qid=1570408658&sprefix=cutting+compound%2Caps%2C213&sr=8-3)
[Polisher compound] (https://www.amazon.com/Meguiars-Clear-Coat-Polishing-Compound/dp/B006FUT154/ref=sr_1_5?crid=2GPHAWV9X86T2&keywords=polishing+compound&qid=1570408671&sprefix=polish%2Caps%2C203&sr=8-5)
[Wax] (https://www.amazon.com/Turtle-Wax-Polishing-Compound-Scratch/dp/B0009JKGJ2/ref=sr_1_7?crid=1QLIV2CDVRQM8&keywords=wax+compound+for+cars&qid=1570408763&sprefix=wax+compo%2Caps%2C190&sr=8-7)
[Orbital Polisher] (https://www.amazon.com/DECKER-WP900-6-Inch-Random-Polisher/dp/B000077CPT/ref=sr_1_5?crid=PM4UWG6DWJ5C&keywords=polisher+machine+for+car&qid=1570408680&sprefix=polisher%2Caps%2C196&sr=8-5)
I also recommend you completely clean the spot with a clay bar as well so you don't scratch the paint more with crud that's already imbedded in the paint.
[Clay bar] (https://www.amazon.com/IPELY-Detailing-Magic-Cleaner-Clean/dp/B0753FSQN6?ref_=fsclp_pl_dp_5)
Good luck!
Looks like a pretty good scratch, mostly paint transfer but it may have scratched through the base coat. You can minimize it by polishing it out. Use a rubbing compound and rent or buy a machine. You can also do it by hand but a machine is better for paint correction. Or alternatively you can have some detailer come out and do it for you.
A good retail polishing compound is meguiars compound or 3m. They all come in different grades of abrasiveness.
http://www.amazon.com/Meguiars-G18116-Clear-Polishing-Compound/dp/B006FUT154
Look at the first review, it shows you a similar situation.
I’m afraid I can’t help you there. I’m in the US. Most of what I can buy is called either polishing compound or rubbing compound, and it’s either made by Tuttle wax or meguiar’s. This is what’s available here. It’s just a paste or liquid with some very fine abrasives.
Oh i didn't realize there was a difference between polishing compound and rubbing compound. Would this work?
Meguiar's G18116 Clear Coat Safe Polishing Compound https://www.amazon.com/dp/B006FUT154/ref=cm_sw_r_other_apa_i_14OHDbVERDVNV
LOL i had the same issue. Turns out that the back camera has a coating, which makes pictures all blurry. Get some polish and with a qtip clean the camera glass. Sadly i figured this out too late, i though the coating was more of a peel so i tried taking it out, turns out i was pulling the glass.
something like this