Reddit mentions of MEGUIAR'S Ultimate Polish

/u/jwinskowski please feel free to PM me at anytime for this. EDIT: if your tank is MATTE don't use products not designed for it! (Shampoo is fine for either)

TLDR rinse bucket and bucket with soap. use auto products. dont drop your MF cloths.


I'm not familiar with Guzzi's clearcoat so ill play towards the cautious side.


Personally I'd pick up a shampoo/conditioner and a basic wash mit thats microfiber made (attracts dirt better and wont mar your question)

(I can recommend 3D pink shampoo. cheap AND I love it)

next up a light compound (you can use meguiars ultimate compound. cheap inexpensive and hard to mess up) this brings out that POP in paint pretty easy to use with a hand applicator which are also cheap :)

next upppp paint polish. this is VERY subjective. I prefer mckees37 stuff but its more expensive than most like. I can also recommend meguiars ultimate polish. good and inexpensive :)

after wards you'll need a wax. meguiars ultimate liquid wax is a great starter and once again inexpensive. (I prefer trademark extender/policoat form mckees37) easy on easy off if you're taking you're time.

afterwards you can call it quits and bam you're done.

or keep going and seal your paint to keep that POP lasting. I HIGHLY recommend collinite 845 as its inexpensive as hell and STUPID easy to apply!!

also Mckees 37 SIO 2 ceramic coating is even easier but $.

then theres coatings. you can use something like Cquarts or even carpro....I personally juse use SIO2 from mckees37 currently. spray on wash off bam. not as effective but beyond stupid easy.


oh and also pick up some microfiber cloths of your choice. theres no right/wrong for them other than DONT DROP EM AND KEEP EM CLEAN.


links to products named

ultimate megs wax

ultimate polish megs

sio 2 coating 10% off ad warning


trademark extender wax spray

3D pink car soap/shampoo


collinite 845

ultimate compound megs

ultimate liquid wax -bigger AG carried

megs ult polish AG carried

Autogeek also price matches to a fair extent! and IF you're local you can pick up. :D


these microfibers are damn nice but $

I personally use these and they're lit. 16 pack and heavy duty enough to last a while

wash mitt I use


even NEW I can highly recommend clay baring your paint dis or the kit if you're new


oh and IF your brake pads literally ooze brake dust....this stuff takes time but takes care of the dust easily linky smells WAY better than carpro even at a lower concentration :p

/u/solitudechirs thanks for the tag

/u/CG_Ops dat wall o text

You can buy everything online, though it's easier to go to a harbor freight with a coupon if you have one. There are plenty of polishers you can buy online of course, but none are as cheap (at least with decent quality) as the harbor freight model. You can of course buy a much better polisher at your local lowes / home depot however unless you have a lot more use for it it's probably not worth it over the harbor freight one (a good polisher will cost you $200+). Everything else you can find at any auto parts store, or maybe even walmart.

Here's some links

• Polisher - http://www.harborfreight.com/6-in-variable-speed-dual-action-polisher-69924.html (no matter what you want a dual action polisher, as other kinds require more skill to avoid damaging your paint)
  
• Cutting pad - http://www.harborfreight.com/6-in-compoundcutting-foam-pad-60311.html
  
• Polishing pad - http://www.harborfreight.com/6-in-polishing-foam-pad-60309.html
  
• Ultimate compound - http://smile.amazon.com/Meguiars-G17216-Ultimate-Compound-15-2/dp/B001O7PNNM?sa-no-redirect=1 (you can skip if your paint isn't bad, no bad swirl marks or scratches)
  
• Ultimate polish - http://smile.amazon.com/gp/product/B004HCOE8Q/ref=pd_lpo_sbs_dp_ss_1?pf_rd_p=1944687402&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B001O7PNNM&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=1P9X3VP7TVA943BYC6C7
  
• Sanding block - http://smile.amazon.com/gp/product/B0009IQYZ8/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1 (if you're going to use touch up paint)
  
• Microfiber rags - http://smile.amazon.com/gp/product/B00ANZHG7C/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
  
• Wax applicator pads - http://smile.amazon.com/gp/product/B0051MYL8E/ref=ox_ya_os_product_refresh_T1
  
• Duragloss - http://smile.amazon.com/gp/product/B002W0ZNIU/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
  
• Color matched touch up paint (if needed) - http://www.automotivetouchup.com/
  
• Detail clay - http://smile.amazon.com/Simoniz-S57-Perfect-Finish-Detailing/dp/B0081OSRQQ/ref=sr_1_2?s=automotive&ie=UTF8&qid=1414207600&sr=1-2&keywords=clay+bar
  
• Foam applicator pads - http://smile.amazon.com/gp/product/B0009IQZPW/ref=ox_ya_os_product_refresh_T1
  
  Basic steps:
  
  

1. Start with touch ups if needed. Apply touchup paint to chips with a toothpick, in small amounts. Let it dry and do another one, build it up until it's above the level of the surrounding paint (may take many coats). Let it dry at least several days and make sure it hasn't sunk in. After it's dried for several days, use some water and the sanding block to gently sand them down flush with the rest of the paint. It will look bad, don't worry. Give the paint a few weeks to cure before moving on.
   
2. Wash the whole car with dawn dish soap and let it dry. Mix up some dish soap (maybe 1 tablespoon) with water in a spray bottle. Spray a section with the soapy water and then rub it down with the clay. This is a very mild abrasive which will remove contaminates, tar, bugs, etc and give you smooth clean paint. Wash car after.
   
3. Use the rubbing compound with the cutting pad everywhere you can. Don't try to get into tight areas or spots where you can't put the pad flush, because you'll shred the foam pad. Do the tough spots by hand with foam pads. Wash the car to remove any residue.
   
4. Repeat with the polish pad and polish, same technique as with cutting.
   
5. Apply the duragloss to a clean car by hand with the cloth applicators. Use sparingly, then wipe off with microfiber rags.
   
   You are done! In most environments the duragloss will last 6+ months. If you keep your car protected with it, you won't need to do the cutting/polishing again (or at least, not for a while).
   
   The trickiest part of the whole process is the compounding and polishing. Here are some helpful videos.
   
   

• How to use a dual action polisher - https://www.youtube.com/watch?v=xrse_DBaUbc https://www.youtube.com/watch?v=5MYqiBLIU9c
  
• How to touch up paint - https://www.youtube.com/watch?v=15T08rfuTSg
  
• How to clay your car - https://www.youtube.com/watch?v=fqW1nzgyMNA
  
  And that's about it! It's easier if you don't do touch ups, but I figure if I'm going to put this much work in it, might as well get them. And if you do it right (with careful application and then sanding) the touch ups look nearly flawless (most look terrible because people don't bother to sand them flush).
  
  edit: two other tips...
  
  

1. If you have black rubber trim, say around the windows, mirrors, door handles, etc you either need to keep the polisher away from it or put masking tape on top of it. The rubbing compound and polisher will scuff up softer materials like rubber and it will look bad.
   
2. When working with the polisher, always turn it off while still on the surface of the car (preferably still moving it) and let it slow down before lifting it off. If you life the polisher off at full speed it might send the polishing pad flying (it's held on with sturdy velcro). When this happens the velcro is basically shot and you're going to need to get a new pad. If you make sure you always turn it off while still in contact with the car, and you don't try to put it on any sharp corners or narrow areas where you can't get good flat pressure across the whole pad, you should be able to do the entire car with a single pad.

/u/daniell61 is all about that detailing. Here's a recent comment from him

---

do you know if that [bike] is primarily plastic or primarily metal?

for metal polishes (non painted) I can recommend marine 31's metal polish. shit works wonders on oxidized metals!!! (its my go to for non painated)



leather? any car marketed leather cleaner would be fine. I prefer mckees37 or meguiars to be fair.

for plastics I like this. a lot

leahter cleaner here

for learning these microfibers are a good cost effective start and you wont be hurt when they die and you replace them.

I can recommend any mckees37 towels or the rag company microfibers.

this or 3D pink soap (dirt cheap but i love it) is a great soap for washing without stripping waxes!


if you're like me and dont have time to clean...

once you're done. spray this and wash it off and boom bam you're set to go and have a good quality glass silia coating! here

I like mckees products a fair bit ;)

for sake of easy ass waxing I like extender wax but I do also like meguiars quik wax. that stuffs damn cheap but good. sadly its carnuba only :(

---

here's another one

---

TLDR rinse bucket and bucket with soap. use auto products. dont drop your MF cloths.


Personally I'd pick up a shampoo/conditioner and a basic wash mit thats microfiber made (attracts dirt better and wont mar your question)

(I can recommend 3D pink shampoo. cheap AND I love it)

next up a light compound (you can use meguiars ultimate compound. cheap inexpensive and hard to mess up) this brings out that POP in paint pretty easy to use with a hand applicator which are also cheap :)

next upppp paint polish. this is VERY subjective. I prefer mckees37 stuff but its more expensive than most like. I can also recommend meguiars ultimate polish. good and inexpensive :)

after wards you'll need a wax. meguiars ultimate liquid wax is a great starter and once again inexpensive. (I prefer trademark extender/policoat form mckees37) easy on easy off if you're taking you're time.

afterwards you can call it quits and bam you're done.

or keep going and seal your paint to keep that POP lasting. I HIGHLY recommend collinite 845 as its inexpensive as hell and STUPID easy to apply!!

also Mckees 37 SIO 2 ceramic coating is even easier but $.

then theres coatings. you can use something like Cquarts or even carpro....I personally juse use SIO2 from mckees37 currently. spray on wash off bam. not as effective but beyond stupid easy.


oh and also pick up some microfiber cloths of your choice. theres no right/wrong for them other than DONT DROP EM AND KEEP EM CLEAN.


links to products named

ultimate megs wax

ultimate polish megs

sio 2 coating 10% off ad warning


trademark extender wax spray

3D pink car soap/shampoo


collinite 845

ultimate compound megs

ultimate liquid wax -bigger AG carried

megs ult polish AG carried

Autogeek also price matches to a fair extent! and IF you're local you can pick up. :D


these microfibers are damn nice but $

I personally use these and they're lit. 16 pack and heavy duty enough to last a while

wash mitt I use


even NEW I can highly recommend clay baring your paint dis or the kit if you're new


oh and IF your brake pads literally ooze brake dust....this stuff takes time but takes care of the dust easily linky smells WAY better than carpro even at a lower concentration :p

Here are a couple videos that'll help with the use of products.

clay bar

everything clay bar, compound, and polish

As for the products I use/like I personally like the Meguiar's Ultimate compound and polish. However there are a ton of other options that do as well/or better. For clay I use a range of products, but for your use I would say Chemical Guys clay bar kit would probably do what you need.

Just an FYI you don't need to invest in a dual action polisher to compound and polish, it can be done by hand and save more than a couple dollars...but it'll take a while. I'd say start with clay and see where you're at afterwords. If you still have a bunch of paint transfer then go from there. Another thing I've heard will remove paint transfer (i've never tried it personally) is a carnauba wax, so if you have some around you can give that a go first.

If you do need paint work (it probably won't be as severe as a key) but this video will probably help if you want to try and tackle it yourself.

i think those scratches will come out. they dont seem so bad. you can confirm this by running your nail around them and seeing if it catches your fingernail. youll be better off if they dont really catch.

i think i would go with this car kit from meguiars

as well as ultimate compound

and some polish

i would then wash the car, clay the car, scratchx the scratches, plastx the headlights, compound the car, polish the car, then wax the car.

that will definitely do you. if you have more money, check out a bunch of the sidebar lists for more stuff. maximus's pretty much has it all.

edit: and maybe a couple of these mf applicators. i think they are easier to use and spread the product and work it in really well.

Yup. See if you can pick up some Meguiar's Plastx or Ultimate Compound or Ultimate Polish. Depending on the severity of the haze, you may need to start with Ultimate Compound first.

Maybe try using a very light cutting Polish or Compound and buffing it out with a Dual action buffer.

Start with a polish instead. Always least aggressive. M205 if Amazon ships to you or maybe you can find some Meg's Ultimate Polish at an auto shop.

Hey guys i'm new to this detailing scene..but I do hope to learn a lot from everyone! I have an 05' white civic and the exterior isn't terrible, but there's definitely parts where there's medium oxidation and swirl marks. Just overall the paint doesn't feel glossy and smooth, just weathered and feels like metal.

Please let me know if I got the steps correct...any inputs is greatly appreciated!

1. First do a thorough wash, and dry completely.
   
2. Clay bar the entire exterior (I'm going to use http://www.amazon.com/gp/product/B0002U2V1Y/ref=ox_sc_act_title_3?ie=UTF8&psc=1&smid=ATVPDKIKX0DER)
   
3. Here's where I don't know what I should do...do I compound or is that not necessary? I'm thinking if I skip compounding, I will use Scratch X (http://www.amazon.com/Meguiars-G10307-Scratch-X-2-0/dp/B0002UNON8)
   
4. Then I will Polish with This: http://www.amazon.com/Meguiars-Ultimate-Polish-16-oz/dp/B004HCOE8Q
   
5. What do you recommend I do next? Could I follow the Mother's 3-step Ultimate Wax starting with this product? http://www.amazon.com/MOTHERS-07100-California-Gold-Polish/dp/B0002U26QE
   
   

• By the way, as you see I have attached the pictures...what do I do with the oxidation on the exterior windshield trim?
  
• Next, this paint damage, I was thinking to get a touchup paint from the dealership, but how should I apply this?
  
• Lastly, whats the most effective way to clean this part..the door jambs?
  
  Thanks so much for all your suggestions and inputs. I hope to learn a lot from all of you.
  
  PS. Extra question, I'm doing a roadtrip after the detail...(stupid i know) but what's a good product to get rid of the bug stains while I'm out on the road?
  
  THANKS!!
  

hey thanks for the advice i took into consideration what you suggested and ended with this stuff,

http://www.ebay.com/itm/170694956256?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

http://www.ebay.com/itm/190381853105?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

and maybe this?

http://www.amazon.com/Meguiars-Ultimate-Polish-16-oz/dp/B004HCOE8Q/ref=pd_bxgy_auto_text_y

http://www.amazon.com/Meguiars-G17216-Ultimate-Compound/dp/B001O7PNNM/ref=pd_bxgy_auto_text_y

Definitely don't do that! That's a paint thinner and could end up way worse.

My first line of advice would be to go to a detailing shop and tell them you know it won't end up perfect but you'd like a quote. It shouldn't be that much since for them this would be a quick fix - it will still be somewhat noticeable but a lot less obvious.

For the DIY method you'll want

http://www.amazon.com/gp/aw/d/B004HCOE8Q/ref=pd_aw_fbt_auto_img_2?refRID=0J677CETDDQ5SWT21DE9

Which you can put on this

http://www.amazon.com/gp/aw/d/B00BUFWL4C/ref=mp_s_a_1_4?qid=1419064284&sr=8-4&pi=AC_SX110_SY165_QL70

What you'll want to do is get some water mixed with dawn dish soap in a bucket and wash the area around the scrape using a microfiber cloth.

Then let it dry.

Next you'll put some of the polish on the pad and go to town on the scrape.

This is what I'd recommend BUT I've never done it by hand so I can't accurately tell you how long it will take. I would start with maybe the first inch or two of the scrape to see how long that takes you.

As long as you're using the pad you shouldn't have the "hand marks" issue the person above mentioned. People put these pads on machines that move a lot quicker than a person would ever be able to.

Here is the desktop version of your link

You can take paint transfer off your car with some polish and an applicator pad:

Polish: https://www.amazon.com/Meguiars-G19220-Ultimate-Polish-fluid_ounces/dp/B004HCOE8Q/ref=sr_1_3?keywords=meguiars%2Bpolish&qid=1556888366&s=gateway&sr=8-3&th=1

Applicator: https://www.amazon.com/Viking-Car-Care-Microfiber-Applicator/dp/B001GJ9JV0/ref=sr_1_3?crid=TF14W8WDIISK&keywords=polish%2Bapplicator&qid=1556888486&s=gateway&sprefix=polish%2Bappl%2Caps%2C131&sr=8-3&th=1

I've used this method before, works great. Just remember to clean the area before and after, and consider adding some wax after.

Perhaps the wax you're using isn't strong enough to protect against the hard water etching. If you're using a carnauba wax, perhaps try switching to a poly wax, like Meguiar's Ultimate Wax. It has a tackier feel to it when it's cured (not slick) so I imagine it forms a thicker, stronger layer of protection over the car.

To fix lots of etching, I recommend getting a DA polisher, porter cable DA is good, here's a whole kit for under $200,: http://www.autogeek.net/poca74pofcop.html?productid=poca74pofcop&channelid=FROOG&utm_source=CSEs&utm_medium=GoogleProductSearch&utm_campaign=CSE&gclid=CJ_twp2IncACFSsV7AodMSwAAA

though I use Meguiar's microfiber DA correction system on mine, a little more expensive but better.

You can try a number of products to "clean" etching by hand. I'd prefer a cleaner polish like Meguiar's Ultimate Compound, a couple meguiar's foam pads, and a quality microfiber. And follow up with an oil-heavy pure polish like Meguiar's Ultimate Polish

Another tip is to avoid letting water dry over your car. If you have a brief shower and your car gets wet with lots of water beads, drive the car around the block, wipe it down with a huge soft microfiber, or use an electric leaf blower to blow the water off. Or get a Metropolitan Master Blaster air dryer https://www.youtube.com/watch?v=dfGSLSTaOB4